Restriction in PR to PO conversion

The system by default allows you to make 'n' no. of POs from a single PR even when the quantity in the PR is exhausted(i.e full quantity in the requisition has been ordered in the PO). Can anyone help me find the settings, so that I can restrict making of PO when quantity in the PR is exhausted? Manually modifying the PR status is one option but that requires user discipline. Can anyone suggest some auto blocking of such PRs? I have tried applying sap notes 385002 but this restricts making of more than one PO referencing the same PR even if the quantity in PR is not exhausted. Hence, this cannot be used.

Hi
Try this out
Goto SE91 and ensure the availabilty of message number 076 with message class as 06
Maintain the message number in the Attributes of system messages in the PO
Make it as error message and process to generate more PO per PRS
Regards,
R. Dillibabu.

Similar Messages

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

CRM 2007 implementation in multiple languages

Hi,
We would like to implement SAP CRM 2007 Web UI and Interaction Center in multiple Asian languages like Chinese (Mandarin), Korean and Japenese.
Is there a standard approach or documentation in this regard?
How will Master data get translated?
Is it necessary to maintain customizing settings descriptions in each of these languages?
How to make UI help documentation available in these languages?
If any of you have worked in this kind of scenario, please help.
Helpful answers will certainly be rewarded.
Regards,
Paul Pandian

You have to upgrade to Unicode if your systems are not unicode already.
You have to maintain all the descriptions and texts in the master data multiple languages. See the note on [Unicode Conversion Guide|https://service.sap.com/sap/support/notes/551344]
If you have multi language already available in your R/3 or ECC system, then it is possible that your systems are in multiple code page.Unicode conversion from different code pages are different and you must watch for any restrictions. For example - Unicode conversion from HK Chinese using code page 8340.

Logitech Z-5500, Audigy 2 ZS / X-Fi

I'm in the market of getting a surround sound system . Right now I have the Logitech Z-5500Logitech Z-5500 in mind. And I am waiting for the new Creative X-FiCreative X-Fi sound cards to come out and see if its "Xtreme Fidelity" is really worth the $$$.
I still need some questions to be cleared up:
I had problems with Audigy 2 Value cards before and couldn't get it detected in my Neo2 Plat (heard many others are having the same problem), is there any issues with the Audigy 2 ZS and Neo2 Plat?
My network NIC card was not detected either, is there any fixes/explanations to the PCI detection problems for Neo2 Plat ?
Any suggestions of other surround sound systems? (all types that can be used on tv and comp will be fine, budget is around 290$USD or 350$CAD)

The 51million-transistor chip provides 24 times as much processing power as the Audigy processor, Creative said. The system uses 24-bit quantisation running at 96kHz, and pushes the signal-to-noise ratio to between 109bB and 116dB. It also incorporates CMSS 3D, the latest version of Creative's sound 'spatialisation' process, which simulates surround sound audio on a pair of earphones or speakers. The latest version of Creative's EAX system, the 128-voice EAX Advanced HD 5.0, is built in too.
To enhance 'lesser' sound formats, X-Fi uses a 136dB "virtually transparent" sample-rate converter to "analyse and identify which parts of the audio stream have been restricted or damaged during the [conversion] to 16-bit and then the data compression stage to MP3 or WMA formats". The upshot, said Creative, are improved dynamics and enhanced low and high frequencies, making for "cleaner, richer sound".
"Sound Blaster X-Fi heralds the beginning of a new epoch in audio, where X-Fi enabled audio products will eventually and completely replace the old hi-fi equipment in the home," said Creative's ebullient chairman and CEO Sim Wong Hoo.
Creative is pitching Xtreme Fidelity as an alternative to the likes of Super Audio CD (SACD) and DVD Audio. Upgrade your music to the next generation of sound quality without having to buy new discs, it says, though we note it doesn't mention how much more room you'll need on your hard drive to store all this higher-quality material.
The XtremeMusic is the base model, providing the standard 109bD SNR. In addition to the standard X-Fi Xtreme Fidelity feature set, the board includes Creative's MediaSource 3 software, which will convert users' digital music collections to Xtreme Fidelity's own format and fine-tune the audio chip's output.
The Platinum builds on the XtremeMusic a drive-bay mounted front-facing controller and port-replicator. It also includes an infra-red remote control and Entertainment Center software. The Fatal1ty board enables EAX Advanced HD 5.0 and CMSS 3D for gaming. The board incorporates 64MB of what Creative calls "X-RAM" high-speed audio-specific memory.
The top-end Elite Pro board provides the full 116bD SNR and incorporates 64MB of X-RAM. It also features a built-in pre-amp for direct recording, and high-impedance inputs for electric guitars.
Creative said the $400 Sound Blaster X-Fi Elite Pro, the $280 Sound Blaster X-Fi Fatal1ty FPS, the $200 Sound Blaster X-Fi Platinum and the $130 Sound Blaster X-Fi XtremeMusic will go on sale in the US this month. ®

PR Closed indicator

Hi Experts,
Can anyone help me on how to configure the PR closed Indicator to be auto once PR converted to PO?
I saw the help data like:
Purchase Requisition Closed
    Flags a purchase requisition as closed, that means that no further
    purchase orders are to be created for this purchase requisition.
Use
    You can:
    o   Set this indicator manually
        -   In change mode for a purchase requisition on the item detail
            screen
        -   When you create a purchase order with reference to a purchase
            requisition
    o   Have the system set the indicator when automatically creating
        purchase orders from purchase requisitions
        You can use the indicator Set reqs to "closed" to specify that the
        purchase requisition is considered closed once the associated
        purchase order has been created, even if the complete requisition
        quantity has not been ordered.
Regards,
Maia

Hi maia!
Setting 06 076 as error message is the correct solution.
for more detials check this thread.
restriction in PR to PO conversion
Regards,
Archit Gandhi

Restriction of sales order conversion to billing request for projects not r

Dear all,
We have SD integrated with Project systems. Each of the sales order is linked to the WBS element of the project which has to be billed. Sometimes a project which is not released is attached to the sales order and while billing it doesnu2019t get posted to accounts because that project/WBS element is not released. Is there a way to restrict conversion of sales order to billing request if the project is not released?
Looking forward for help.
Thanks and regards,
Padmaja

Define a new condition type and assign it to the pricining procedure
In the requirement routine have a new routine and put a logic so that it compares the subtotal field A of nett price
For e.g KOMP-NTPRC
The condition type should apply when KOMP-NTPRC < =the draft amount
You have to try this
I havent done it practically
Regards
Raja

RE: Conversion of Restricted stock to unrestricted stock

Hi All,
After PO when the stock is posted to storage location the stock is posted to restricted stock by default, where batch management and classification is involved. I want to know why the stock is posted in restricted stock or at least I want to know to convert restricted stock to unrestricted stock.

Hi,
If you want to change the batch status from restricred to unresticted use you can do in MSC2N
If you want to change the configuration to select Unresticted use goto
SPRO > Logistic general > Batch management > Batch status management > Activate Batch Status Checking in Warehouse Management.

Restrict planned orders conversion according to procurement type

Hello all,
We would like to be able to limit the possibilities offered in MD04 for planned order conversion according to the procurement type defined for the material.
For example for a material produced in-house (procurement type E), we would like have a button only for "Production order" or "Partial production order". Currently I have those two buttons, but also process order, partial process order and purchase requisition.
I suppose somewhere in customizing we can change that, but I can't find where.
Can anybody assist me?
Thank you,

Hi Jules,
please have a look into Form CHECK_DELKZ_PODE in LM61RF78.
This where standard determines which Buttons to exclude, depending on the mrp element.
You can use the enhancement spot at the end to add functions you don't want to be available to table FCTAB via Perform FCTAB_APPEND.
Unfortunately there is no customizing to do this.
Uli

Restriction of conversion planned order

Hi SAP Gurus,
I have question. Exists any way, how to set up, that planned order could be converted to productin order only 14 days before planned start?
Thaks
Lukas

Hi Lukas,
You can mantain schedule margin key for the plant in customizing and mantain the opening period as 14 days. You need to mantain the material master with schedule margin key.
With the opening period mentioned, when planned order is created it would subtract 14 days from order start date.
Do let me know if it suits your requirement.
BR
Rahul

J2SE adapter PI 7.1 issue with XML to flat conversion and namespace length

Dear reader,
We are facing an issue with J2SE Adapter PI7.1 for a number of flows.
The flow requirements:
[1] Namespace length for interfaces is up to 100 characters
[2] The XML message must be converted to Flat on the adapter channel
Our PI system is at patch level 7 and we implement J2SE adapter on patch level 7 as well.
We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1 j2SE adapter) but no issues where found with the XML to flat conversion [2].
Experimenting with J2SE adapter on patch level 6 we found the long namespaces [1] are supported however an issue is found with the XML to flat conversion [2] as stated in SAP note 1335527.
An SAP Customer Message is raised on this issue however your input is highly appricated!
With Kind Regards,
Harald Kastelijn
Edited by: Harald Kastelijn on Mar 6, 2010 9:17 AM
Edited by: Harald Kastelijn on Mar 6, 2010 9:19 AM

We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1
j2SE adapter) but no issues where found with the XML to flat conversion [2]
I think the restriction of namespace length still remains in design time (IR).....the same however has been extended in configuration and runtime...this SAP note has some information: https://service.sap.com/sap/support/notes/870809

Can we restrict Page assets shown in Content Finder to match available cq drop targets?

We have defined a component that accepts drag-and-drop of user content, and the cq:DropTargetConfig node (under cq:editConfig > cq:dropTargets) defines groups=[page] because it accepts assets of type cq:Page not images. Our component is a copy of the /libs/foundation/components/image component, because it accepts drag-and-drop, and we modified its innards to accept cq:Page not image. Seems that the 'accept' property is completely ignored when groups=[page], I think 'accept' is only processed when groups=[media] i.e. images.
This is basically working fine except there is so much user content that it is time-consuming for users to select the right pages to drag from the Content Finder extension into the drag-and-drop target. And if they pick the wrong kind of asset it can really mess up the target page. There are so many types of components based on cq:Page and many of them just do not belong in this particular drop target, but if the user drags an inappropriate asset into our drop target then cq allows it, often with disastrous results (content properties and nodes get overwritten in the wrong place, etc).
Yes the Content Finder has a search bar but really I would like to restrict the list of assets shown there without the user having to type in a search term. I hope there is something for Page-based content analogous to the 'allowedPaths' property in a Template. In the WCM when you click New Page at some jcr path, a template-chooser dialog comes up and it only has templates which are allowed for that jcr path, so the dialog is uncluttered and guides the user to a relevant template. Similarly, Components have an 'allowedParents' property so you can't use them where they don't belong. Please advise if there is something similar to make it easier to find relevant content in Content Finder tab Pages.

I just checked this behavior. In CQ 5.5, an image dropped in an image component OEM is trunct'ed to fit the column or parsys that it is added to. The image remains 100% full-scale and flush left. In the past as a CQ architect, I have participated in the conversation no less than 10 times. If fact I discussed this with a client last week. They insisted on being able to use renditions as part of content.
I've advised on various solutions. The most complex solution I've advised on will autosize the image component to fit the column it is used in without author intervention. This is, however, predicated on the column components to be rewritten using a grid system and not %. It's extremely complex and changes the behavior of various components dramatically.
I agree I don't fully understand or embrace the philosophy on this one. I see the purist attitude toward renditions of images but its not practical in the field. Under the current philosophy images of the same size and scale will be cached in multiple locations.
Lars, feel free to school us on this one... it's your baby.

Currency conversion error in SAP HANA

Hi,
I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
I added a calculated column as follows:
When i click on "OK", i get error -
The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
and checkbox "calculate before aggregation" get unchecked. See screenshot below:
Please suggest what could be reason? Thanks in advance.
Regards,
Amit

Hi Amit,
If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
Regards,
Ravi

Middleware-Error of Field conversion from R/3 to CRM

Hello Friends,
I am getting the below error when we tried replicating pricing condition objects from R/3 to CRM. Kindly help me if you have any solution on this.
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
Message no. CND_MAP141
Diagnosis
Conversion of the source field into the target field cannot be implemented. Possible causes may be:
No conversion is defined for the current contents of the source field in the system tables for condition exchange.
There is no conversion rule for converting the current field content in the system tables for condition exchange.
Conversion according to the defined conversion rule was not correct for the current contents of the source field.
The reason for this os often problems that result from putting together an R/3 System with a CRM System. These problems are, for example:
not paying attention to the restrictions in CRM for data values or supporting applications and objects,
incorrect exchange objects or exchange objects with the wrong selection values,
an inconsistent data structure from the R/3 OLTP System.
Thanks & Regards,
Yogesh

Hello Yogesh
I have just noticed the message you placed on SDN re condition customising download errors. Did you ever get to the bottom of this problem ?
The reason I ask is that I am getting similar errors. I actually started with two errors which I believe are related, these being:
Funct. CND_MAP_CONV_FUNC_T682Z_FNAME cannot convert content AUBEL of field T682Z-QUFNA to field /SAPCND/T682Z-QUFNA
and
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
I have since read OSS Note 319636 and looked at maintaining the separate
conversion rules in CRM Customizing table CND_MAPM_CNV_FLM by adding an
entry for AUBEL into view V_CND_MAP_CNVFLD using SM30. This I saved to
a transport.
I then looked to add AUBEL to the field catalog within the IMG however I received a
message stating that :
"Entry is in SAP name space. Message no. /SAPCND/CUSTOMIZING403".
So it won't let me.
Did you have similar problems and did you resolve them ?
Regards
Ian
[email protected]

How do I stop Firefox from archiving conversations after I send a message to someone?

When someone sends me an email and I reply, the conversation automatically goes to the archive. I can retrieve it by clicking on the 'undo archive' link, but I want it to stop archiving things in the first place. It seems to do it no matter who the conversation is with, meaning it's not restricted to personal emails from Gmail or Yahoo or any particular company I'm doing business with. It's been happening for a few months. I do not remember changing the archive setting and I cannot find any way to access the archive setting. Thanks for your help.

''carroled [[#question-1048761|said]]''
<blockquote>
When someone sends me an email and I reply, the conversation automatically goes to the archive. I can retrieve it by clicking on the 'undo archive' link, but I want it to stop archiving things in the first place. It seems to do it no matter who the conversation is with, meaning it's not restricted to personal emails from Gmail or Yahoo or any particular company I'm doing business with. It's been happening for a few months. I do not remember changing the archive setting and I cannot find any way to access the archive setting. Thanks for your help.
</blockquote>
''carroled [[#question-1048761|said]]''
<blockquote>
When someone sends me an email and I reply, the conversation automatically goes to the archive. I can retrieve it by clicking on the 'undo archive' link, but I want it to stop archiving things in the first place. It seems to do it no matter who the conversation is with, meaning it's not restricted to personal emails from Gmail or Yahoo or any particular company I'm doing business with. It's been happening for a few months. I do not remember changing the archive setting and I cannot find any way to access the archive setting. Thanks for your help.
</blockquote>
Thanks, Phillipp. I found the info I need to fix the problem.

How to restrict planned order by production order type

we develop one Z-report which include planned order as well as production .on restriting the output by order type given on selection screen of report, production order can be restricted but it show all the planned order which is to be converted to selected order type production order or not.
is there any suggesion to display that planned order only to the output of report which will convert to the production order of the type given on selection screen of report.
i know that we define prod scehu profile in work sched view of material and in production schedu. profile we define the order type picked while conversion of planned order to production order.but i am not able to connect them by using table...please guide

Hi,
Could you explain your problem correctly.
regards
mkrk

Restriction in PR to PO conversion

Similar Messages

Maybe you are looking for