Restriction of the constants in V_T511K

Can I put condition on using the constants in V_T511K on the basis of company code, personal area or personal subarea?

Hi,
follow Navinkumar's advice.
Have a PCR which reads your decision fields.
Based on this decision, you can read a constant from T511K which is applicable for your population.
Let's say that if CoCode is Y999 and EE Group is 1, a certain WT needs to have value 1000. In all other cases a value 1200 needs to be read.
In this case you will have 2 constant in T511K:
Z0001 with value 1000
Z0002 with value 1200
Your PCR would roughly look like
OUTWPPLANT
Y009
    OUTWPPERSG
    1
    AMT=KZ0001
    AMT=KZ0002
AMT=KZ0002
Have fun.
Wilfred.

Similar Messages

Where in SAP ECC 6.0, I can Maintain the Constant CADTR for COA/CLA

Hi All,
Where in SAP ECC 6.0, I can Maintain the Constant CADTR treatment for COA/CLA Housing Perkrs.
I am facing problem in calculation of housing Perk Calculation in SALARY PROCESSING.
Please Suggest.
THANKS in advance.
Dilip Parab

Hi,
Alongwith that u cn check the following IMG path.
IMG -> Payroll -> Payroll:India -> hOUSING -> Maintain the Processing Options for CLA
Ans also as Patrick said u cn get the same directly through V_T511K.
Regards,
Praveen

How can I eliminate the constant attempt of add-ons opening in new tabs and tabs redirecting everytime I open a page or website that I DO want??

No matter what page or website I am on, as soon as I go to another website or want to open a page of my choosing, multiple unwanted pages try to open wanting me to add on, install, etc. or additionally, get tabs opening that say redirected. Result is that the whole time I spend on the net, I keep having to close 2 or 3 tabs of wanted pages constantly trying to open before I can stay on the one I actually want.
In addition, is there any way to modify or eliminate the constant popups opening on the sides, the bottom, and tops of pages...all over the place, while I'm trying to view a page. I spend more time trying to close all that junk before I can read something and then it even comes back and I have to do the same thing again.?????????
please HELP!!!!!!

Sounds like you have have inadvertently picked up a dose of Malware.
Sometimes a perceived problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Restrict if the excise invoice isn't cancel we can't cancel the billing Doc

HI
How to Restrict if the excise invoice is not cancel we can't cancel the billing Document
I know if the billing document is Cleared we can restrict by using the copy control Requirement in VOFA (29)
Is it possible to Standard SAP ? if Yes how?
Regards,
Prasanna

Dear prasanna_sap,
It is not possible in standard SAP.
You have to go for a development.
Exit RV60AFZZ-USEREXIT_NUMBER_RANGE
Please find the logic
If XVBRP-WERKS = J_1IWRKCUS - J_1IWERKS Pass the XVBUK - VBELN to J_1IEXCHDR u2013 RDOC, If STATUS = R the document should not allow saving (Error message: Excise invoice to be cancelled first), else allow saving.
Please let me know if you have any further clarifications.
Thanks&Regards
Raghu.k

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Is there any restriction on the length of all Primary keys in a table

Hi all,
Is there any restriction on the length of all Primary keys in a data base table?
i have some 10 fields as primary key in a DB table and length exceeds 120 and getting a warning.
Please let me know will there be any problems in future with respect to the same?
With regards,
Sumanth

Well actually there are constraints like
Total of internal lengths of all primary key columns        1024 Bytes
Number of primary key columns per table                     512
For other information about SAP database please refer to http://sapdb.org/sap_db_features.htm
Thanks & Regards,
Vivek Gaur
Alwayz in high spirits

Bridge CC and the constant thumbnail regeneration problem.

I'm one of many who suffers from Bridge CC constantly regenerating thumbnails. There are multiple threads about the problem, with different descriptions and different theories of the cause.
I recently tried an experiment. I replaced Camera Raw.8bi (version 8) file in the CC folder with the Camera Raw.8bi file from my old CS6 folder (version 7.1.0.354). That worked OK. Bridge CC and Photoshop CC work with the older version of Camera Raw, and the constant regeneration of thumbnails ceased.
Unfortunately, installing the old version of Camera Raw causes Bridge CC to regenerate thumbnails for all folders on the first visit, even though the files are cached and unchanged. But after that first visit, no regeneration occurs.
I have no idea why that is, but I think the experiment gives good evidence that the problem lies in the Camera Raw code and not in the Bridge CC code itself.
None of the various threads I've seen give me any confidence that Adobe has acknowledged this problem, or is even aware of it. And I'm not sure of the best way to get their attention. I've seen references that say Adobe bug reporting should be done on the photoshop.com website. I've tried that in the far past for different issues, but with no success. However, with no known alternative, I've made the following post:
http://feedback.photoshop.com/photoshop_family/topics/bridge_cc_re_caching_thumbnails?rfm= 1
I encourage others to "reply" to that post. Maybe if enough people respond, Adobe will notice and acknowledge.
If anybody knows a better way to report bugs (and get acknowledgement), please share.

Been there, done that:
http://feedback.photoshop.com/photoshop_family/topics/unneccesary_bridge_thumbnail_and_pre view_extraction
They know about it, they just don't know how to recreate it.
Best thing we can do is reliably recreate the fault. My workaround is to only enable Lens Profile Corrections when necessary, as it is a combination of that and some other factor(s) which seems to trigger it.
If you read all the discussions, you'll see that there are two bugs which produce the same symptoms. One introduced in probably ACR 6.1, whichg was fixed in 8.2; and the other was introduced in 7.3 and is ongoing.

Restrictions on the size of blog entry

When I publish a blog entry 200 words about it is appeared properly. But if I write a great article, I see only a blank space on the blog page. But on the front page of the blog in summary form, everything is fine. Does anyone know what is the problem.

James Christopher wrote:
is their any restrictions on the size of the internal Hard drive
mac book G4 12in.
You might take a look at your System Profiler description of the machine. Select "About this Mac" from the Apple menu, then click the "More Info" button (at least that's what is says in Tiger). Or you can just launch System Profiler from the Utilities folder.
In either event, you will open to a Hardware Overview like this (except yours will be for the laptop)
Hardware Overview:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,2
CPU Type:          PowerPC 970 (2.2)
Number Of CPUs:          2
CPU Speed:          2 GHz
L2 Cache (per CPU):          512 KB
Memory:          5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.1.4f0
(Note, if you post, do not post your machine's serial number, which will be in the display.)
That being said, my TiBook from 2003 now has a 160G Hitachi Travelstar in it, which was the largest IDE little drive I could get at the time. If your machine is in that time frame or newer, you can put in pretty much anything they make now. Of course, if it is truly a MacBook, then the SATA laptop drives are getting very big.
You can get some more information at this OWC link which will allow you to see how big an IDE drive you can put into a G5 PowerBook.

How to fix the constant noise in the left corner of the Macbook Air which is connected not with a fan?

How to fix the constant noise in the left corner of the Macbook Air which is connected not with a fan?

Unfortunately if there are various colours across the screen then you have broken the LCD Screen and it will need replacing. If the colours change when you press the area lightly then this is another symptom that you've broken the screen.
Sorry to give the bad news!

Only the constants are showing up in the target values.

Hi Guys,
Please help me about my problem in message mapping..
Im quite knew in XI version 7.0.
How come Only the constants are showing up in the target values. my constant values are only doc_type and partn_role.
The rest are data from sql. How can I solve this..Please help.
This is the result of my test tab
Left side - sender
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_TRAVEL_SENDER xmlns:ns="HTTP://TRAVEL.COM/TRANSACTIONS">
   <row>
      <DOC_TYPE>ZTRV</DOC_TYPE>
      <SALES_ORG>4000</SALES_ORG>
      <DISTR_CHAN>40</DISTR_CHAN>
      <DIVISION>41</DIVISION>
      <SALES_GRP>411</SALES_GRP>
      <SALES_OFF>4101</SALES_OFF>
      <PURCH_DATE>2008-10-24</PURCH_DATE>
      <PMNTTRMS>Z015</PMNTTRMS>
      <PURCH_NO_C>AVADIUDS </PURCH_NO_C>
      <PARTN_ROLE>AG</PARTN_ROLE>
      <PARTN_NUMB>0001100074</PARTN_NUMB>
      <INSERTED>1</INSERTED>
   </row>
</ns:MT_TRAVEL_SENDER>
right side -test result under receiver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:BAPI_SALESORDER_CREATEFROMDAT2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
   <ORDER_HEADER_IN>
      <DOC_TYPE>ZTRV</DOC_TYPE>
   </ORDER_HEADER_IN>
   <ORDER_HEADER_INX>
      <UPDATEFLAG>I</UPDATEFLAG>
      <DOC_TYPE>X</DOC_TYPE>
      <SALES_ORG>X</SALES_ORG>
      <DISTR_CHAN>X</DISTR_CHAN>
      <DIVISION>X</DIVISION>
      <SALES_GRP>X</SALES_GRP>
      <SALES_OFF>X</SALES_OFF>
      <PURCH_DATE>X</PURCH_DATE>
      <PMNTTRMS>X</PMNTTRMS>
      <PURCH_NO_C>X</PURCH_NO_C>
   </ORDER_HEADER_INX>
   <ORDER_PARTNERS>
      <item>
         <PARTN_ROLE>AG</PARTN_ROLE>
      </item>
   </ORDER_PARTNERS>
</ns1:BAPI_SALESORDER_CREATEFROMDAT2>

Hi leelaratnam morampudi ,
How can I check if im getting the data in sql? I think it get the data but dont pass the value in bapi
this is the test result in sender
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED>

How to change the constant with which you multiplied a column

Hello,
I'm making a spreadsheet with prices in Dollars and then converting them to Euros. Obviously the exchange rate changes all the time, so I was wondering how I could multiply my column A of dollar prices by the current exchange rate to get my column B of Euro prices and then change the prices when the exchange rate changes.
Is it possible to just give the new exchange rate so that my numbers in column B automatically change?
I know I can just always click c1 = b1*1,34 (for example) and then fill down, and then at a later date remove all the prices again and do C1= B1*1,30 and fill down again but I was wondering whether there was an easier way to change the Constant with which you previously multiplied a column.
Thanks for your help, I hope my question was sort of understandable!
I've looked but couldn't find a similar post, sorry if I missed it!
Larissa

LarissaG wrote:
Hi,
This definitely helps! But is a bit inconvenient when you have lots and lots of rowns in Column A.
Oh well! I better get started.
Thank you!
That's because you are thinking about typing formulas into each an every row by hand. That would be horrendously inefficient and people would despise designing spreadsheets if it had to be done that way.
Using Jerry's example as the starting point,
Type the formula =B3*C$1 into cell C3 and hit enter.
Select cell C3
Drag down on the little circle at the bottom right corner of the selection box to complete the column. Alternatively, you can Copy then select the rest of the column and Paste.

Restrict all the text in a datagrid input without having to create custom item renderers

Is there a way to restrict all the text in a datagrid input
without having to create custom item renderers for each
column?

How are you trying to restrict it? If you're trying to
restrict it uniformly, for example, to entirely numerical inputs,
then the easiest way I know of to do so is with an itemEditor. You
can just add the same itemEditor to each column that way.
This only saves work over custom renderers if you're trying
to restrict multiple columns in the same manner, but for numeric
only tables, it's pretty short.
You could probably also do it with itemEdit and
itemEditBeginning events, but that would likely be more work then
simply declaring a single global itemEditor and using it in all
your columns.

Problem with the field length restrictions in the WSDL file

Hi all,
We have created a XSD file where we have defined fields and given some restrictions (like minLength, maxLength) for each field. See below one ex of one element "Id":
{code     <xs:simpleType name="Id">
          <xs:restriction base="xs:string">
               <xs:maxLength value="40"/>
          </xs:restriction>
     </xs:simpleType>
{code}
Here we have defined maxLength of this field as 40 chars. Our WSDL uses (refers/import) this XSD file and we ganerates java skeleton using RAD. But at runtime if we set more than 40 chars then also it is accepting. It is not throwing an exception. (In the generated java skeletion these restrictions are not reflected antwhere)
I have one question that, if such restrictions defined in the XSD file works or not? and is it a industry standard to define restriction in the XSD file?
If yes then what i need to do more to make it working?
If not then is there any way to do such validation of the fields that are input to the webservice? Or shall i have to just write my own java class to validate each field?
Regards,
Ravi

Or is it possible that we give length restrictions in the XSD (and import this XSD in WSDL) and generate java skeleton from WSDL then the restrictions defined in XSD are mapped into java classes?
For ex:
<xs:simpleType name="Id">
    <xs:restriction base="xs:string">
        <xs:maxLength value="40"/>
    </xs:restriction>
</xs:simpleType>so when in generated java skeleton we set value to "Id" element which is more than 40 charsthen it should throw a exception?
Is it possible by default or do we need to write custom validation classes to do validations on such fields?
Has anybody worked in such scenerios?
Or how to do field validations in webservice? Simple question.
Thanks In Advance.

How to construct the constant pool?

Greetings,
I seems to have a little bit of a problem.
I have a text file, generated by the javap -c <class_name> command,
i.e.:
javap -c myClass > myClass.txt
This myClass.txt is the input I've got. I do not have the myClass.class, from which it was generated.
What I wish to do, is to generate, from this text file, a leagal, runnable, class file (i.e., myClass.class).
But, I have problems understanding how to construct the constant pool array.
I have read the VM spec (java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html).
The thing is, that it does not explain how to extract the needed information from the text file.
Can someone assist?
Would appreciate,
Ohad.

Compiled from Hello.java
public class Hello extends java.lang.Object {
    public Hello();
    public static void main(java.lang.String[]);
Method Hello()
   0 aload_0
   1 invokespecial #6 <Method java.lang.Object()>
   4 return
Method void main(java.lang.String[])
   0 new #4 <Class java.util.Timer>
   3 dup
   4 invokespecial #7 <Method java.util.Timer()>
   7 new #2 <Class Hello$1>
10 dup
11 invokespecial #5 <Method Hello$1()>
14 lconst_0
15 lconst_1
16 invokevirtual #8 <Method void schedule(java.util.TimerTask, long, long)>
19 returnWell in this example, you have opcodes with arguments which are expressed as (for example) "#7 <Method java.util.Timer()>". This describes a constant pool element. I assume #7 refers to the location within the constant pool, and the text description tells you that it's an item of type method, and gives you the method name. So for all arguments expressed in this form, you'll need to reconstruct a constant pool item.

Is there a way to restrict changing the browsing history in safari with ought restricting the entire application?

Is there a way to restrict changing the browsing history in safari with ought restricting the entire application?

For the iPod touch in your profile?
Private browsing help here > iOS: Safari web settings
For Safari for Mac OS X ...
From your Safari menu bar click Safari > Private Browsing
You can only block all history in Private Browsing, pages you visit, and autofill.

Restriction of the constants in V_T511K

Similar Messages

Maybe you are looking for