Restrictions from SAP Systems to the emails adding

Gentlemen,
Regarding SMTP Email Configuration, I already applied SAP Note u201C455140u201D and every thing its working fine, I can send email through SAP Systems no problem,
My question is,
There are no restrictions from SAP Systems to the emails as I can put any Emil in E-mail address in user ID properties and I can send with it without any problem and this is not logical,
Please advice.
Regards,
Ahmed Saber

Hi NALLAM GUNA RAN,
First, thanks for fast reply
Please can you explain in more details what you mean of XI/PI box,
And whatu2019s the solution of this situation as itu2019s not accepted from customers.
Regards,
Ahmed Saber

Similar Messages

  • Sending emails from SAP system

    Hai everybody,
    for sending emails from SAP system , what are all the configuration we have to made & what are all the cheks we have to perform at BASIS level .
    Pl guide me.
    Ramesh

    Hi,
    Configurations need to be done with Tcode : SCOT
    and RFC need to be established using SM59.
    SO_NEW_DOCUMENT_ATT_SEND_API1 is the Function Module used for sending Emails from SAP System.
    The Email ID's are maintained in XK02 , XD02 For Vendors and Customers in the Basic Data.
    You need to write the code to fetch the ID's from the Vendor Master dataor customer master data based on the Vendor/Customer Numbers.
    You can always monitor the Emails in SOST.
    This is all you need to do.

  • User couldn't recieve the mail from SAP SYSTEM

    Hi all experts,
    User couldn't recieve the mail from SAP SYSTEM since the Unicode changes were pushed ,
    how to fix the issue ?
    Thanks & Best regards,
    Michael

    Hi Michael,
    Is the SAPConnect configured as per note [455140|https://service.sap.com/sap/support/notes/455140] ?
    Since you are talking about receiving emails, do you see the emails in SOIN transaction (or report RSBCSIN)? Have you tried telnet directly to the SAPConnect plugin as described on note [607108|https://service.sap.com/sap/support/notes/607108]
    What is the value of parameter is/SMTP/virt_host_<*>?
    Regards,
    Tiago

  • How to check the Idocs sent from SAP system

    How to check the outbound Idocs sent from SAP system to target systems.
    How to know the message types and target systems.

    Hi,
    In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS.  Depending on different status you can differentiate them as Inbound or Outbound Idocs...
    Cheers...
    Santosh.
    <i><b>Mark All Usefull Answers...</b></i>

  • Aattach an existing Excel file to an email from SAP system.

    Hi,
    How can I attach an existing Excel file from SAP system (Example in 'DIR_TEMP' folder) & send a mail. Guess this requires a class with a method which picks up the file using the file path. Does CL_DOCUMENT_BCS provides this???? boz CL_DOCUMENT_BCS->ADD_DOCUMENT_AS_ATTACHMENT is for Add Existing Document as an Attachment,if so please let me know how with few lines of code??
    Thankx in advance.

    *  Local Data declarations
      DATA: ls_rec          TYPE somlreci1.
      DATA: lp_send_request    TYPE REF TO cl_bcs,
            lp_document        TYPE REF TO cl_document_bcs,
            lp_sender          TYPE REF TO if_sender_bcs,
            lp_recipient       TYPE REF TO if_recipient_bcs,
            lp_bcs_exception   TYPE REF TO cx_bcs.
      DATA: lt_text TYPE soli_tab,
            ls_text LIKE LINE OF lt_text,
            lv_flag.
      DATA: lt_tline TYPE TABLE OF tline.
      DATA lv_receiver TYPE ad_smtpadr.
    *  DATA lt_attach  TYPE soli_tab.
      DATA ls_tline TYPE tline.
      TRY.
    *   create persistent send request
          lp_send_request = cl_bcs=>create_persistent( ).
    * Get the text
          IF iv_stxt IS NOT INITIAL.
            CALL METHOD zfi_flexgl_common=>read_text
              EXPORTING
                iv_stxt   = iv_stxt
              IMPORTING
                et_tline  = lt_tline
                ev_failed = ev_failed.
            LOOP AT lt_tline INTO ls_tline.
              APPEND ls_tline-tdline TO lt_text.
            ENDLOOP.
          ENDIF.
    *  create and set document
    *     create document from internal table with text
          lp_document = cl_document_bcs=>create_document(
                          i_type    = iv_format_type   "'XLS' "HTM'
                          i_text    = lt_text
                          i_subject = iv_msg_subj ).
          IF it_attach IS NOT INITIAL.
    * Add attachment
    *        DATA:      l_size      TYPE sood-objlen,              " Size of Attachment
    *                   l_lines     TYPE i.                        " Lines count
    *        l_lines = LINES( it_attach ).
    *        l_size = l_lines * 255.
            CALL METHOD lp_document->add_attachment
              EXPORTING
                i_attachment_type    = 'RAW'
                i_attachment_subject = 'My attachment'
    *            i_attachment_size    = l_size
                i_att_content_text   = it_attach.
          ENDIF.
    *     add document to send request
          CALL METHOD lp_send_request->set_document( lp_document ).
    * Sender addess
    *l_sender = cl_sapuser_bcs=>create( sy-uname ).
    *call method l_send_request->set_sender
    *  exporting
    *    i_sender = l_sender.
    *      LOOP AT it_rec INTO ls_rec.
          lv_receiver = iv_rec.
          TRY.
              CALL METHOD cl_cam_address_bcs=>create_internet_address
                EXPORTING
                  i_address_string = lv_receiver
                RECEIVING
                  result           = lp_recipient.
            CATCH cx_address_bcs .
          ENDTRY.
          CALL METHOD lp_send_request->add_recipient
            EXPORTING
              i_recipient  = lp_recipient
              i_blind_copy = abap_true
              i_express    = abap_true.
    *      ENDLOOP.
          IF sy-subrc <> 0.
            ev_failed = abap_true.
            EXIT.
          ENDIF.
    *     ---------- send document ---------------------------------------
          CALL METHOD lp_send_request->send(
            RECEIVING
              result              = lv_flag ).
        CATCH cx_send_req_bcs.
          ev_failed = abap_true.
        CATCH cx_document_bcs.
          ev_failed = abap_true.
      ENDTRY.
      IF iv_commit = abap_true.
        COMMIT WORK.
      ENDIF.

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • How can i autoforward that mail from SAP INBOX to the outlook

    Hi ,
    My Requirement is that,
    I have to send an email to outlook, whenever PO Created in SRM System
    I have created  custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
    It is sending SAP Mail to the User to his inbox perfectly.
    Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
    Please give some suggestions. ot it can be achived any other way.
    Note: This is Email Message not a workitem.
    I have doubt that RSWW program will work only for workitems.*
    Thanks & Regards,
    Suresh.

    Hi ST,
    what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
    Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
    Hope it helps.
    Aditya

  • How to consume a web service provided by third party system from SAP system

    Hi Friends,
    Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
    Do we get an URL to create a client proxy for consuming the web service?
    Thanx in advance,
    Ram

    Hi Ram,
    of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
    <soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
    which is the actual adress of the service.
    An example service can be found here:
    <a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
    containing the WSDL URL at
    <a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
    You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
    have fun,
    anton

  • Problem in printing Crystal Report from SAP Business One - the printing cut in it width margins

    Hi
    i'm trying to print crystal report layout from sap b1. when i preview the report as pdf file, i have the option to choose Fit in size option and then the layout print O.k with out any margins that been cut.
    The problem start when i'm trying to print the layout directly from sap b1 (printer button) which cause the page to be cut in it width margins.
    How can i control the printing of crystal layout when i'm printing it directly from sap b1? do i have the option to chose 'Fit page size' from sap system?

    Hi,
    Please check SAP note:
    1820939 - Page settings of Crystal Reports not transferred
    correctly
    Thanks & Regards,
    Nagarajan

  • How to call an EXE file on a remote system from SAP system?

    Hi Friends,
    I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
    Thanx in advance,
    Ram

    Hi Ram,
    Try this
    SXPG_COMMAND_EXECUTE
    Reward if this helps,
    Satish

  • Download from SAP system to Excel sheet

    Hi,
    I have a list of materials, would like to download it from SAP system to an Excel sheet.
    Kindly let me to know the procdure to do it.
    Thanks
    NDS

    Hi,
    Please execute T code MM60 or the required T code to get the list of materials and Go to sap menu Bar ->setting->list->save->local to spreedsheet and save it your desk top to create an Excel file.
    Regards
    Ram

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Hi,
    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    Regards
    Seshagiri

  • Transfer Data from SAP system to non-SAP system

    Hi all,
    I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
    Thanks
    Arif
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Oct 16, 2011 10:38 PM

    Hi,
    you can create the same...
    but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
    or else follow some conventions if you are just starting the things..
    HTH
    Rajesh

  • QRFC/TRFC for sending idocs from SAP system to XI

    Hi experts,
    The standard program RFFOEDI1 generates payment orders - first PEXR2002 and then EUPEXR idocs. These idocs are to be sent to the bank from SAP through XI. Bank partner profile is maintained. But these idocs because of TRFC are not getting sent in the order in which they are generated by the SAP system. So I changed the bank partner profile settings from TRFC to QRFC and gave the rule name as first 16 of mes type. But the idocs are struck in the SAP system. Is there any standard program to be run to send the idocs out from SAP system or is it automatic.
    Please suggest a standard method which is to be followed to send the idocs in the same order in which they are getting generated for the scenairo above.
    Regards,
    Asha

    Hi Asha,
    As you said Idocs are stucking,
    To send Idocs to XI, you must have maintain some settings in XI to receive Idocs. Once they are done properly .in R3 side standard way to send idocs to XI is Maintaining<b> <i>Change Pointers</i></b> and shedule the programe to trigger that most of Standard idocs will have standard programs to catch change pointers and send them to external system.
    and to maintain the same order of idocs there is a setting called Quality Of Service in XI side ,that option should be set to Exactly Once In Order .
    Regards,
    Ramesh.

  • Two SAP systems in the same host "no files processing"

    Hello!
    I have two SAP Systems installed on the same host.
    If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
    <b>How can I set up this issue?</b>
    Thank you very much
    regards
    Thank you very much
    regards

    Hello!
    I have two SAP Systems installed on the same host.
    If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
    <b>How can I set up this issue?</b>
    Thank you very much
    regards
    Thank you very much
    regards

Maybe you are looking for