Restrictions in change mode

Hello experts!
I have to modify an Z report. When I switch to change mode, appears the text in gray, and the edit, replace insert buttons, the same buttons when you try to edit an standard program.
But in program atributes, the editor lock is uncheched !!! This is amazing. This program is a copy of an standard program.
Pls help me to edit this program in the ordinary way, because I need to do a lot changes.
Thanks in advance
Pablo

Hi,
You can switch off modification assistance.
menubar - edit - Modifications operations - Switch off Assistance.
thnx,
Ags.

Similar Messages

  • How to - only display the price of approved PO (not change mode)

    Hi,
    Following are our PO release strategy
    1. Release id : P has
        a. Released indicator (tick)
        b. Changeablity - 4
    The above setup is working fine, means still after the approval users can change all the fields. New strategy is triggered once the values are changed.
    Now the issue is business owner does not want the price, qty in change mode after approval. After approval ME22N to show
    1. Price & qty to be in display mode
    2. All other fields (except the one which affects PRICE) in  change mode.
    I tried to all the combinations, but after approval I get to see either all the fields in display mode or all in change mode.
    Is it possible to display the price related fields only for the approved PO in ME22N.
    Please advice
    Thanks,
    Raj.

    Hi Mani,
    Thanks for the fast reply.
    1. There is no ME22N - Fsel Key available.
    2. Only for the approved PO - we want the price fields in display mode.
    3. There is no restriction required for the un approved POs.
    Is there any way.
    Please reply
    Thanks
    Raj.

  • How to restrict the change access in CRM for OLTP orders

    Hi Guru's,
    Please let me know  how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
    We have  the orders that are  created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM  system is allowing change mode for ECC orders and ending up with errors.
    Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
    Regards
    Suneel

    Hi.
    You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
    Regards.

  • How to make a field from display mode to change mode for a perticular tcode

    hi all,
    my client want to change one field which is in display mode of a material doc in mb02.
    Restrictions in some fields  in MIGO needs to be changed.
    Uploading point in case of issue: While editing the MIGO latter,  this field needs to be edited.
    Goods recipient in case of receipt: While editing the MIGO latter,    this field needs to be edited.

    hi thanks for quick replay,
    my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
    i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
    any comments?
    regards,
    susanta
    Edited by: susanta bindhani on Jun 19, 2008 2:18 PM

  • Unable to go to change mode of variable in BI query designer

    Hi Friends,
    I need to change the variable in BI Dev server to meet the requrement, but when ever i am trying go to change mode of variable (right click on the variable and click on restriction) getting the error that <i>"the key is already is assosiated with an element of this collection".</i>
    Already i have updated my GUI for BI and able to open and create the queries
    can any body give me solustion please.
    Thanks,
    Shaliny.

    Hi Sebastian,
    Just see whether you have included nay keyfigures in your column.
    Because the suppress result option is grayed out if you donu2019t have any keyfigure in your queries.
    Thanks and regards
    Arun

  • Disable the Editing Option in Employee Start Date at change Mode

    Hi Expert's,
                     Here I have one requirement to Disable the Particular field in change mode. In Change mode the employee Start Date will possible to edit
    but my client asking to disable that field. In create mode only that field should be enabled. i meant field ( PA0001-begda).
    i know it is possible to restrict edit option with help of BADI and User Exit. but am looking to do in customizing option. it is possible to do?.
    Thanks in Advance..
    Regards,
        Thangam.P

    Hi ,
              Anyone suggest me to resolve my problem.
    Regards,
        Thangam.P

  • Disable "Change mode" in FBL1N

    Hello All,
       One user here would like block the options "change mode" in FBL1N transaction after click in document. I'm annex the screen about my doubt. Is it possible ?
    regards

    Hi Rollin,
    You can also define rule for:
    Document Change Rules, Document Header
    Document Change Rules, Line Item
    The field which you want to restrict for change, just add that field to rule and don't mark the check "Field Can be Changed", in this case when user try to change the field it will always be display only in FBL1N AND FB02 also.
    IMG Path: Financial Accounting (New)>Financial Accounting Global Settings (New)>Document>Rules for Changing Documents
    You can also try 2nd Option, the user who are authorize for FBL1N, don't give them authorization for FB02 in the Role, in that case they can only display the vendor line time, they cant change.
    Regards
    Javed

  • Change mode of the excise invoice is showing zero excise values

    H ifriends,
    The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
    While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
    Thanks
    Sasi

    s

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Excise invoice number showing display option in J1IEX change mode.

    Hi CIN Experts,
    We are using E.C.C6.0.
    In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
    In 4.7E system showing the change option in T.code: J1IEX change mode.
    Regards,
    Hanuman

    We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
    It is SAP Standard & to break this you would need the access key from SAP.
    If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
    Thanks & regards
    Hameed Parvez

  • P.O Error in Process after copying the existing item in change mode

    Hi All,
    We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
    We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
    This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
    I believe this is SAP bug and raised with SAP for OSS.
    Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
    Regards,
    Teja

    Hi Teja
    it works fine for me.
    old po template..
    taken describe procureemnt - goods
    copy the line item
    changed qty and price
    POs created for both items in one PO since vendors are same?
    what the error message says in the application monitor or rz20 / monitor sc.?
    for me i had a contract in my pld pos.(sc).
    muthu

  • How to find out what users have an order open in change mode

    Is there a table I can easily query to determine which user has a specific order (VBAK) open in change mode?
    Will give points of course.

    HI,
    Use this function module. This will return you the list
      CALL FUNCTION 'ENQUEUE_READ'
                    EXPORTING GCLIENT = GCLIENT
                              GUNAME  = GUNAME
                              GNAME   = GNAME
                              GARG    = GARG
                    IMPORTING SUBRC   = SUBRC
                    TABLES    ENQ     = ENQ
    Thank
    Mahesh

  • Condition Type appear twice in PO Header in Change mode

    Hi Gurus,
    I have done the following steps:
    1. I have created an import PO and added few Freight Conditions in the header, and Customs Condition in Line item
    2. I have booked a customs invoice against the PO. (MIRO posted for Planned Delivery Costs)
    3. Now when I go to the change mode of the PO, then in the header I can see same condition type twice, one with the value maintained earlier and another with value 0.
    Issue:
    I should not be seeing the condition type twice in header.
    Please help me resolve the issue as early as possible.
    Thanks in Advance.
    Regards,
    Ankush

    Hi Ankush,
    Make sure that header conditions are marked as header only and same for item condirions in m/06
    try creating a new PO after making these changes
    Reg
    Dheeraj

  • Delivery Output Type not updated automatically in change mode

    Hello,
    I am dealing with a strange problem.
    If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
    Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
    Expectiing solution from experts.
    Thanks
    Hari

    Hi,
    May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered.  Pls check this once.
    I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
    I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

  • How to Grey out the field "tracking number" during change mode in the order

    HI Expert,
    How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
    during creation IW31 = not grey out and allow entry.
    for change mode IW32 = grey out
    if i set grey out at config OIOPD, it will grey out even during creation mode.
    Please advise
    Thanks
    Regards

    Hi
    I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
    regards
    thyagarajan

Maybe you are looking for