Restrictions not restricting

Hopefully you guys can help. I am trying to restrict an app my nephew purchased....I know I can not completely delete the app once it's purchased, so I placed restrictions on what can be downloaded from the App Store. However, even with the restriction on, I am still able to download or repurchase the app that my nephew purchased. For some reason it's not being included in what's be restricted...

Hello Luz1990,
Once an app is purchased, it can be downloaded again and again any time.
However, if you totally want to restrict the app downloads from your nephew
you could toggle the App Store button ithe Restrictions section.
The app disappears if you do so.
Another alternative to restrict the downloads is you can restrict the age limit
of type of apps to be downloaded in the restrictions section

Similar Messages

In Free goods how to restrict the quantity to not to alter.

Dear All,
I have maintain condition record for free goods in VBN1.EX.102.While creating sales order for 20 quantities system populates 204.But if am changing this as 152 or 205,system is allowing to do.Same is the case at delivery.How can we restrict the system to not to allow the changes in sales order in case of free goods .Please guide me.
Regards,
Deepti

Hi
KIndly check the below user exit and make the free goods item as in display mode
MV45AFZZ 'USEREXIT_FIELD_MODIFICATION'
to change the SCREEN-INPUT = 0 to make it display for free goods item category Tann
By doing above if any one changes main item system will accordingly change the free goods item also
Regards
Damu.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

My 6 is not allowing me access to icloud nor to any of my email addresses. I've tried to reset it but it is asking me for my 'restrictions' passcode and I never set one up. What should I do?

My 6+ iphone is not allowing me to access icloud nor any of my email accounts. I've tried to reset it but it asks for my 'restrictions' passcode which I
did not set up. I can't reset it via itunes either because it says I have to turn 'find my iphone' off but it is off. What should I do please?

Hi nadzpad,
I'm sorry to hear you are having issues with your iPhone 6 Plus. I also apologize, I'm a bit unclear on exactly what you are seeing or describing. If you are being asked for a Restrictions password, you may find the following article helpful:
About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
If you are getting a message that you must turn off Find My iPhone before restoring from iTunes, then these articles may be more useful:
iCloud: Remove your device from Find My iPhone
Find My iPhone Activation Lock - Apple Support
Regards,
- Brenden

Row Level Restrictions on DeskI Report not working under InfoView

When running/refreshing DesktopIntelligence XI r3 (Full Client) reports under InfoView, the row-level restrictions applied in the universe are not being included in the SQL (additional filtering is NOT happening). However, if a user creates a report using the same universe in WebIntelligence or if the user runs the same report in DesktopIntelligence, the row-level restrictions are working.
It strikes me that the problem has to do with security rights granted (or not granted), but I can't figure out which settings would allow the proper running of a DeskI report under InfoView.
Thanks for any assistance rendered!

Mike,
Do people connect to Infoview and Deski using the same authentication method and the same username?
How does this compare to how your data restrictions are configured?
Are you using @Variable('BOUSER') restrictions? Have you taken domain into account e.g. "Domain\UserName" vs "UserName"?

Characteristic Restrictions is not working in Universe

Hi,
I have given some Characteristic Restrictions in query designer's filter tab.But when i created universe on it,its not working here.
Even i have provided condition in SAP BI query,still this is also not working in universe.
CAn you tell me whats going wrong here?
Thanks
Piyush

Hi
what kind of restriction do you apply (constant values, variables, what kind of operator do you use etc)?
Which version of BO do you use?
Conditions defined in thehe query designer are not applied in the universe. This is by design. Characteristic restrictions defined in filter section should work though.
Regards,
Stratos

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Restrictions not working in BO Webi Report

Hello,
I have created a universe on BEx query. Now on this universe when i create reports with restrictions the restrictions are not working.
For example:
If i create a BO query with restriction say Doc_Number= 108994 and display Doc_Number and Delivery_Number then:
in Doc_Number column i get 108994 but in Delivery_Number column i get all the delivery numbers from the cube. In other words all Delivery_Numbers are retrieved when i restrict data for one Doc_Number and vice versa is also true.
Can anyone help me solve this issue?

Hello,
If i remove all the filters and include any of key figures then i get correct data.
But if i remove the key figure and apply a restriction say on Delivery_Number then i get incorrect data.
I too believe that ideally this should not happen.
eg:
Doc_NumDelivery_Number
111                      1010
222                      1234
333                      5678
Now if i include Doc_Num and Delivery_Number in query and apply filter Delivery_Number = 1010 then the output is
Doc_Num           Delivery_Number
111                      1010
222                      1010
333                      1010
Same is the case if i apply filter on Doc_Num i get all Delivery_Number.
What should be the reason behind such behaviour of the query????

ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!

Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
                         (ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
                         (iii) ADRMS Running on Windows Server 2008.
                         (iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.

Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Restriction of sales order conversion to billing request for projects not r

Dear all,
We have SD integrated with Project systems. Each of the sales order is linked to the WBS element of the project which has to be billed. Sometimes a project which is not released is attached to the sales order and while billing it doesnu2019t get posted to accounts because that project/WBS element is not released. Is there a way to restrict conversion of sales order to billing request if the project is not released?
Looking forward for help.
Thanks and regards,
Padmaja

Define a new condition type and assign it to the pricining procedure
In the requirement routine have a new routine and put a logic so that it compares the subtotal field A of nett price
For e.g KOMP-NTPRC
The condition type should apply when KOMP-NTPRC < =the draft amount
You have to try this
I havent done it practically
Regards
Raja

My itunes does not open. I receive this error message:unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary

Process:         iTunes [6564]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [143]
Date/Time:       2011-06-26 09:12:25.888 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 57AD9B95-8923-403C-BDB2-EBBBD4E1F09C
Interval Since Last Report:          40546 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      0B83B69E-63F7-4197-908B-49A24783F09F
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 3 incoming serial ports
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

I have the same problem...
Process:         iTunes [498]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [254]
Date/Time:       2011-06-27 14:23:04.822 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: AC114B5B-BBDE-47BE-A34A-73D0CBEC2D1D
Interval Since Last Report:          21605 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      7CA002EB-2F78-46A8-B8FC-917C420125C9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Lion Server postfix mail not being delivered to mailboxes. "SMTP restriction `reject_invalid_helo_hostname' after `permit' is ignored" and "connect to private/policy: Connection refused" errors.

All, Im stumped. In fact I have been on the phone with Apple Support and this has been escalated to the top engineers, as I think its got them too..
Anyway, here is my problem..
I'm running an Mac Mini with OS X 10.7.4 Server. I have had mail running on it for 2 months or so, without any issues. The mail was actually migrated from 10.6 in March, and It actually went smoothly. I have 3 domains which all recieve mail and they all work (or did up until 2 weeks ago)..
So the story is this.. I can send mail from my domains, without issue. imap and dovecot must be working.. cause all the stored mail, can be read with the mail IMAP client.. I can even transfer mail messages from one mailbox to another with Mail client. Sending mail is a breeze, it still works and the recipients still recieve their mail. But I noticed I wasnt getting any mail at all from those mailboxes... no mail, no spam, nothing.. which is unusal. I fired up Server admin and checked out the SMTP log, and this is what it showed for every email recieved: (xxxxxx is just me hiding sensitive info)
Jul 21 14:25:20 xxxxxxxx postfix/postscreen[65857]: CONNECT from [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/postscreen[65857]: PASS OLD [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: connect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: warning: restriction `reject_invalid_helo_hostname' after `permit' is ignored
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: NOQUEUE: reject: RCPT from nk11p03mm-asmtp994.mac.com[17.158.233.225]: 451 4.3.5 Server configuration problem; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<nk11p99mm-asmtpout004.mac.com>
Jul 21 14:25:28 azathoth postfix/smtpd[65858]: disconnect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Ok, now what is odd, is these rejected messages are not even appearing in the mail queue in Server Admin. I have no idea why there are not being delivered
Ive checked my postfix main.cf file and master.cf files they both look ok.. Ive even replaced them with the main.cf.defualt.10.7 and master.cf.default.10.7 files and to no avail... same problem..
So in summary
I can send mail out
IMAP is working on the client end (thus dovecot is) exsisting stored emails can be accessed, read, moved unread etc..
mail is coming into the sever, but its being rejected. there is NO rejection email sent back to the sender.
mail is recieved by postfix, but cyrus isnt doing anything with it.. I have no idea where it goes...
Could anyone shed light on this...
my main.cf file:
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
azathoth:postfix root#
azathoth:postfix root# less main.cf
azathoth:postfix root# more main.cf
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#       mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in
#   the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion

Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.

FaceTime for Mac: Troubleshooting FaceTime

Restrictions not restricting

Similar Messages

Maybe you are looking for