Restrictions of movement types in MIGO

Hello,
When I select goods receipt in MIGO, I would like the system to avoid using 201 movement type. I mean, if I select goods receipt, it should only work for goods receipt
Is there a way that I can block other movement types like this?
I tried to do it from
SPRO->MATERIALS MANAGEMENT -> INVENTORY MANAGEMENT AND PHYSICAL INVENTORY ->SETTINGS FROM ENJOY TRANSACTIONS -> SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS
and tried to put some restrictions, but it did not work.
Thanks in advance for your help
Irem

Hi
Access to mvt types can be restricted through authorizations. Check with your basis person (auth object is M_MSEG_BWA).
If you want to skip a particular transaction in MIGO then deactivate it in IMG - MM - Inventory management & phy inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO) - Settings for Transactions and Reference Documents. Select the transaction MIGO - click transaction/event (you can deactivate goods issue here or) - Click goods issue - deactivate which ever are not required. You cannot see deactivated options here in MIGO.
Thanks

Similar Messages

  • Restriction for Movement type 202

    Dear SAP Consultants,
    I want to make the restriction for Movement type 202 by material document.
    The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
    Kindly give me the details for incorporating it .
    Best Regards
    Deepak Rade

    HI,
    202 movement type is the reversal movement type of 201 (goods issue to cost center)
    when we cancel material document with 201 system create reversal posting with 202
    And you can manually enter 202 movement type also in MB1A and MIGO
    Now if you want to restrict user to use 202 directly
    GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
    So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
    {IF in future needed you can always add those in OMJJ again}
    You can cancel material document is through T. Code MBST
    This will fully serve your purpose

  • Can i restrict a movement type with respect to storage location

    Hi
    Is there any way to restrict the movement type for a particular storage locations.
    For eg.
    If am using a Mvt 311 tP btwn storagelocations.
    If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
    Is it possible
    Guide me
    Sunil

    Sunil
    Please contact your BASIS security team , with the help of Authorization roles you can restrict
    Reward if helpful
    Regards
    venu gopal

  • Restriction for Movement type 202 - reference of 201 Movement only

    Dear SAP Consultants,
    I want  to make the restriction for Movement type 202 by material document.
    The  user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
    Kindly give me the details for incorporating it .
    Best Regards
    Deepak Rade

    Hello Deepak,
    This is SAP SNC SDN forum and your query looks like more of the of SAP MM.
    You can post your query in SAP MM SDN forum.
    SAP ERP - Logistics Materials Management (SAP MM)
    Regards,
    Nikhil

  • Restricting Transaction Keys while calling SAP Movement Types via MIGO

    Hi Experts
    I have a requirement which is stated below:
    When ever I will call movement type 561 via MIGO, system will check if PRD transaction key is going to be hit & throw an error.How to achieve this.Plz advice.
    Regards
    Soumick

    Hi Soumick Basak
    Can you clarify us?
    In sap standart , price difference is occured when you post a movement with differences in a standart price controled material master. If there is not a configuration in OBYC (automatic account assignment) , sap gives an error message which consists of like a PRD account not determinated for Valuation class XXXX ...
    What you want to control ?
    Regards.
    M.Ozgur Unal

  • Specify Storage location in Movement type 311 - Migo

    Dear All
    we have 3 plants 1000 , 2000 , 3000 , every plant have many storage location as the following :
    plant 1000 ( A01 , A02 , A03 )
    plant 20000 ( B01 , B02 , B03 )
    plant 1000 ( C01 , C02 , C03 )
    i have on user "XX" access only plant 1000 ( A01 , A03 ) for some movement type (101 - 161 - 261 ) , also he used movement type ( 301 - 311 - 313 -315 ) to transfer from his storage location A01 , A03 to other storage location B01 , B02 , B03
    when we add transaction MIGO to the user XX
    how can i specify that user can only transfer to storage location B01 , B02 , B03 without access any movement to the storage location B01 , B02 , B03 .
    i need help urgently

    Hi,
       You may maintain the authorization check for storage location in the path: OLMB - Authorization Management - Authorization Check for Storage Locations. Now, use the authorization object M_MSEG_LGO to restrict the usage based on user role. Refer the KBA: 1668678 - No authorization check for storage locations in inventory management
        But if you are using one step procedure for stock transfer (301), then the user should have authorization for both plants to transfer the goods. If you want to restrict the same, you may go for two step procedure. But in case of 311 & 313, both the storage locations are entered in MB1B and hence both the storage locations are checked for authorization.   Refer the note: 205448 - Authorization check M_MSEG_LGO for stock transfers
    Regards,
    AKPT

  • Restriction on movement type,storage location on USER ID

    Dear Guru's,
    I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
    1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
    2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
    Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
    Kindly give ur valuable suggestion to resolve the issue......
    With Regards.

    HI
    For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
    So its a combination of SLOC & MVT tye. Try & give feedback
    Shakti
    Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM

  • Difference between header and item movement types in MIGO

    Dear all,
    what is the difference between movement type entered in header of MIGO and item level?
    not all movements are possible in header. how it is controlled? may not be in OMJJ
    thanks and regards
    gajanan

    Hi Gajanan,
    Movement types in Standard SAP are predefined. You can also create a new movement type, but generally it is not required.
    In MIGO ,movement types on right hand side corner changes as per the transaction your are carrying out in header level like
    Good reciept, Good issue, , Cancellation, subsequent adjustment, Remove from storage, placer in storage etc.....
    As you go for transaction and make allocation in the allocation field, the movement type changes.
    Regards,
    Tushar Patankar

  • Restrict for movement type 201 by material typeu200F

    Dear Gurus,
    Can SAP restrict movement type 201 by material type?
    For example, Can i set authorization for 201 movement type to only material type UNBW material?

    Check this answered links
    Authorization check on movement of material type
    Material Type - Movement Type Link

  • Purchase Order Type and Movement Type in MIGO

    Hi
    Is there a way to have a movement type automatically posted in MIGO for different Purchase Order Document Types?
    THanks

    Hi
    If i understand correctly you want to post a single GR pertaining to 2 different PO's that are created.
    If that is the case, I think you cant even post GR for different PO's in a single MIGO.
    Thanks
    Kalyan

  • Restricting the movement types...........URGENT ISSUE

    Hi.. Every body,,,
    Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
    Myproblem is
    i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
    01---02 -
    accepted
    0201--
    accepted
    0103--
    not accepted
    0104--
    not accepted
    0203--
    not accepted
    0204--
    not accepted
    And 1,2,3,4 plants must transfer goods to vendor
    i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
    i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
    and in another role i was resricted comany code 3 and 4 with movement type 541 only..
    If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
    I don't have functional kw......This is an urgent issue.......please suggest how to restrict..

    Hi.........T'X for responding imm....
              But i have tried ,what u said , still same problem...please provide some more inputs...

  • Movement type 161 Migo

    Hello, I was trying to receive a material using trx MIGO. (movement type 101). The system did not allow to make the movement, and show me a message saying that:  User without authorization to movement type 161( Return for PO order).   
    I want to know because  the system had that behavior.
    Thanks in advance for the help
    Regards
    Enzo

    Hi Enzo,
    I think too you may have a return order and that defaults a 161 movement.
    If that is what you want to receive, then ask the user with the authorization problem to run SU53 transaction after getting the error message and pass that screen to your BASIS/ Authorization guy to add the required authorizations to your users.
    If that is not what you want to receive, your buyers need to change the PO and take out the return indicator.
    Hope this helps.
    Monica Araoz.

  • Restricting a movement type

    Hello all,
    i need a solution...is there a way to restrict a material for a movement type...here is the scenario..i want to restrict a material for 261 movement type.Is there a way to restrict a material for that movement type..

    Hi Srisha,
       You can goto transaction "OMJJ".Here you need to put the no. of movement type.
       On the same screen under dialog structure,there is a tab for allowed transaction.You can remove those combinations and you won't be able to use those movement types for any transaction.
      But this is not advisable
       But still if you go ahead with the changes then keep a note of all the transaction so that in future you can revert them back whenever required.
      Basis authorization is another alternative
       Reward points if it works.
    Regards
    Karan
    Message was edited by:
            Karan Bhatia

  • Restriction of movement types at storage Location

    Hi Gurus ,
    My client requires that  no user should be able to use movement type 261 and 262 from 2 out of 5 storage location of a plant .
    please let me know how can we achieve this.
    Regards
    Abhi

    Hi Abhi,
                 create 2 different roles
    1) in the first role give him the Authorization for a Storage Location A and B, and give him all the Authorization for rest of the Mvt Types Except 261 and 262
    2) In second Role Give  Full Authorization for the Storage Locations C, D and E.
    Use the above given Objects and fields.
    NO FS and NO Approvals Required in the same.
    else it will be going to be a long and complex methord using BADI and User Exit,
    and in future you will always have to depend on the Programmer.
    This will work for your Scenario.
    Regards,
    Yawar Khan
    Edited by: 1234_abcd on Oct 3, 2011 1:40 PM

  • Initial update of stock with 561 movement type in MIGO

    Dear All,
    For the initial entry of stock into the system by using 561 movement in MIGO, the following error is being raised
    Maintain Vendor for the excise invoice
    Message no. 4F185
    For this the plant has been created as vendor and all the excise details were maintained in J1ID.
    But still the same error is being raised.
    Please give a solution for this error.
    Thanks & Regards,
    Venkat.

    Hi Venkat
    Check again in J1ID Chapter id,Material and Chapter Id Combination ,and Vendor excise Details  whether you have maintained or not, if not maintained it
    also make sure that excise indicator for plant and vendor is active
    Vishal...

Maybe you are looking for