Resubmit a podcast but with a different rss feed.

I am having to resubmit a podcast using a different rss feed. I have just recently changed on how I will be doing my podcast and of course the rss feed has changed. How do I go about fixing the older podcast with the new feed or do I have to do away with the old and start all over again with getting my podcast reinstated?
Thanks in advance
Kimmer Mussman

Interestingly, it appears you did manage to get your podcast accepted in the Store - if you did this with an .html feed I'm a bit surprised it worked. I wonder whether you started with an .xml URL and it got changed by accident?
If you did manage to get the Store to accept a feed with an .html extension then you will need to change its attention to the revised version of the feed. This will mean that you will have to leave the present feed where it is, upload a version with the correct extension (having checked it works) and then add the 'itunes:new-feed-url' tag to the incorrect feed as described in this page:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Of course if you managed to change the extension by accident then changing it back should do the job.

Similar Messages

How do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

How do i set different refresh frequencies for different RSS-feeds?

Suppose I have 10 different RSS-feeds. Now, I want feed #1 to refresh every 5 minutes, feed #2 - every hour, feed #3 - every 3 hours, etc. I know how to set refresh frequency for all the items in the RSS-folder (that's done through account settings). The problem is it can be done for the folder as a whole, but not for individual items.

Go into the app whose notification you want to change, hit menu, then settings (or preferences), you'll find the notification settings in there.

Problem with Java Blog RSS feed?

If I click on this feed, I get nothing
http://feeds.feedburner.com/SDNWeblogs_JavaProgramming
When I click on this feed, I get the latest blogs.
http://feeds.feedburner.com/SDNWeblogs_Abap
Is there something wrong with the Java RSS feed?

Hi,
Did you report things to [email protected]?
Eddy

If I re-install my podcast app with a different apple ID will I lose all the media from the older one ?

I have the Podcast app installed on my iPhone with a lot if free media content downloaded.
Now I need to re-install the app with a different apple ID.
Will I lose all my content by doing do ?
Please help. I don't want to lose anything.
Please let me know if there is a work-around.

You don't really want a new Apple Account (which is what you are describing) - all of your iTunes purchases will still be tied to the old Apple Account, all of your iCloud info will be under that old Account, all of your Messages will be under that old Account.
Why not just to to Manage your Apple ID and edit your Apple ID to the new email you want it to be? You cannot edit an Apple ID using an Apple Domain email address (@me.com, @mac.com, @iCloud.com), but if your current ID is not using one of those type of email addresses, then changing it is the way you want to go. That way, everything stays with the Apple ID since it is the same Apple account.
Just be sure to sign out of all apps on the device (iCloud, Messages, iTunes & App Store, FaceTime) before you change it.
To EDIT your current Apple ID at Manage your Apple ID go to: Apple - My Apple ID
Cheers,
GB

Automator & podcast - but with a twist

So, here goes.
Every day, numerous small audio segments, from 5 seconds to 2 minutes long, get delivered to a particular gmail account as attachments, each a single attachment to an individual email. They are then routed to a mailbox on my mac.
I need an automator action - or several - to do the following every day:
a) download the audio attachments from that mail folder to a folder on my desktop or elsewhere;
b) format those into a daily podcast - but not one big single file, rather a podcast with "enclosures" (is that what you call it?) where each segment is a different track/chapter;
c) upload the podcast, appropriately formatted, to some filespace somewhere.
The podcast/feed on my Typepad site will, I assume, link to the newest file each day.
Is this the kind of thing that Automator can do? Do I need another piece of software in addition? If so, what? Should I attempt to do it myself, or hire someone?

Many thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Links with special characters work on the web, but are broken in RSS feed

Hi everyone,
I've been searching the forum, but haven't found anything relevant.
Here is my problem. Most embedded links on my blog posts work fine. However, sometimes I use links with embedded special characters. Here's an example link to a YouTube video:
http://www.youtube.com/watch?v=ugiY9t6fzo4
When I go to my blog on the web and click on the link, the link works fine. BUT, when I look at my RSS feed from the blog, the link gets transformed into:
http://www.youtube.com/watch%253Fv%253DugiY9t6fzo4
... which doesn't work.
Something (I presume iWeb?) replaces the "?v=" with "%253Fv%253D"
Obviously, I get a lot of e-mail from my RSS subscribers telling me about broken links.
What can I do? Does anyone else have this issue?

I followed the topic concerning the Firefox photoalbum problem but I´m using Safari and the albums will not show up on the web !!!! I also exchanged the detailview and headercontrol *js which worked fine for opening the photoalbum on my harddisk with firefox. But when its uploaded to the server it won´t display and that in Safari!!!! On the published folder on my harddisk everything works fine
www.voyage64.com
just cklick on "photoalben" no album apears. Does anyone have the same problem with safari ???
regards,
David

I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me. So I would like to have different programs, songs, apps etc for each phone. What is the easiest way to do that

Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

TWice the same KF but with a different restriction of year

dear all,
when i put the same KF besides each order and i put a restriction on the first where year=2006 (and call it YTD-1) and the second year=2007 (and call it YTD), the output listing gives the correct figures per month for 2006,
BUT although there is NO data yet for 2007, the listing gives also the months of 2006 (under YTD) but with empty cells!!!
the restriction works but under YTD there should be nothing !!??!!
WHAT do i wrong ?????
regards,
Herman

HI,
It is not possible and it should not happen.
If you have no value in the columns then it should not show up in the report.
Just check if you have certain restrictions other then year on the key figures that can cause value to go off.
Anyway if you want to remove them just set the properties of the key figures and chek "suppress zero" ->rows and columns.
it will the columns with blanks.
Hope it helps
Thanks

Problem with validating my RSS Feed

Hi,
Been trying to submit my podcasts to iTunes but got a problem as it keeps coming up saying 'We had difficulty downloading episodes from your feed'.
My feed is: http://feeds.feedburner.com/MarkandNinashow and when i check it on feedvalidator.org it says the following;
Recommendations
This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
line 15, column 0: description should not contain iframe tag (17 occurrences) [help] <description><![CDATA[<iframe width="300" height="300" src="//www.mixclou ...
line 13, column 82: Misplaced Item (17 occurrences) [help]... sic" /><itunes:category text="Comedy" /><item>
Could someone please help me with this as i have no idea what this all means.
would appreciate any help.
Many thanks,
Mark Evans

Hi
Thanks for this. I'm new to this as when it was done before, someone else did it for me and I have no contact with them now.
Originally our interviews etc were uploaded to soundcloud and then I used Google Feedburner for RSS feed then submitted to iTunes the feedburner link and that was it - iTunes would automatically update.
But our station has now been told we must use Mixcloud for licensing and copyright reasons. So all I did was use an RSS feed converter for mixcloud as is is what was suggested. I then used this generated link on Feedburner then used feedburner link for iTunes - well I tried.
Hope the above makes sense. Was this correct thing to do? Or is it a mixcloud problem?
I'm not very technical so a lot of this talk in your response was foreign to me.
Are you able to help?
Many thanks for your time.
Mark

Different rss feeds

I'm fairly new to Flex and I'm working on it for a school
project. I'm trying to make an rss feed that can chose different
blogs from a combo box but so far only the first option at
compiling ever shows up.
Does anyone have any suggestions? I can put code up if that
would help.

The database for the feeds is located in your User Library>Syndication file. This holds display information specific to each feed, including unread item count. Yes, sometimes their behavior is "wonky". Don't know specifically why, however, poor RSS coding could be the source.
It is a pain to go back and reset the display parameters for each feed. Would like Apple to create a "RSS Feed Manager" which allows that very thing in an easier way.
Practically, you can always trash the database file, letting Safari rebuild the feeds. You'll need to call up each Feed to reset the default display parameters to your liking.

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

How to work on one project but with two different computers

I'm editing a movie.
My computer might be overwhelmed with all the information - speed is slowed and it gets hot quickly.
I would like to use my second computer where I have cloud installed
to edit on the same timeline or in a different sequence to give my
main computer a rest.
Is that possible?
Thank you for your help!

As well as the reply from Anish about using your program on 2 computers, you need to ask in the program forum for how to best use the programs to do what you want
http://forums.adobe.com/community/premiere_elements/content
http://forums.adobe.com/community/premiere/content

Can we use 1 computer w/1 Apple ID, but with 2 different iPhones?

My husband is getting his first iPhone for Christmas, and I'm wondering if we can both use the same computer and same iTunes account for our syncing? Right now, he has an iPod, and we're sharing the same iTunes Apple ID, and it's working okay for us. We just pick what apps and music, etc we want on our respective devices. What I'm most curious about are the contacts. He doesn't need/want my contacts and I don't need/want his. How can we use the same iTunes account and ID, yet essentially have two different phones and all that entails? (Contacts, calendar, etc?) Is it possible? Or should I set him up with his own entirelly on a different computer?

You can sync as many ipods/iphones/ipads as you like with one computer.
Each will only sync what you select.

Resubmit a podcast but with a different rss feed.

Similar Messages

Maybe you are looking for