Result Analysis(WIP) not posted after 4 cycle run

Hi,
Every month value is posted in Result Analysis GL account for WIP. But we found in period 10 and period 11 value is not posted Result Analysis GL account after running 4 cycle run (Overhead calculation, WIP calculation, Variance calculation and Settlement). What may be reason ??
Regards,
Samrat

Hi Christian ,
One question related to Cut-Off period regarding WIP calculation which myself and Ajay were discussing 15 days back..
Is it required to change the cut-off everymonth when we calculate WIP . In my client.. then donot do that .. but still we calculate the WIP..
Is the significance of cut-off period is to tell the system the first period to calculate WIP .. during implementation .. My client never changes that and its in a MTS ( Process Order Senario )... but calculates WIP every month.
Regards
Sarada

Similar Messages

KKAX - error 'Manual WIP/results analysis is not allowed for order

We are running KKAX on some process orders. A few of them get the error 'there are values for cost element 999999 that are not assigned to any line ID'; however, we do have a line id set up for the cost element, etc; when we drill down further on the message, what we end up with is 'manual wip/results analysis is not allowed'. The business transaction for this is KABM. I can see on the order that KABM is not a permitted business transaction.
We only have this problem on a few of the orders. How is the KABM being invoked? Is it caused by an order status? How can I fix this?
Thank you

Hi Christian
i have come up with the new business requirement
I want to change some of the material in one of the plant into discreete.For that, I tried to delete the production version and then tried to uncheck repetitive manufacturing indictor in MRP4 view.
But it is giving the following error
Either you are attempting to delete production version 1000 or
you haveattempted to deselect the repetitive manufacturing indicator for the production version.
It is not possible to delete the production version or to
deselect the repetitive manufacturing indicator for the following reasons:
o Cutoff period for WIP calculation has not yet been
established. For the period in which a goods receipt was last entered with reference to this production version.
o The cutoff period for variance calculation has not been
defined for the full life of the production version.
Can you please help me out how to resolve this issue

Processes Not Posting After Maintenance

Hi,
Periodically, processes will go to Not Posted status after we bounce the servers during our maintenance window. Usually, bouncing the process scheduler and clearing the cache does the trick. However, one in a blue moon, jobs simply will not post. We will spend hours bouncing servers, clearing caches, etc. and nothing works. Then a couple of hours later everything will start to post.
Any familiar experiences or thoughts on why this occurs?

The maintenance varies from week to week; it's generally OS-level patching that doesn't require a reboot. I've got an experienced Tech Arch team taking the servers up and down, so I'm confident that the servers are being bounced correctly.
In the past, when reports have not posted after maintenance we have shut down the process scheduler and cleared cache and reports started posting. More recently, we've bounced the servers for several hours only to have reports start posting on their own afterwards.
I pulled the stdout log and found the following:
Java exception thrown: java.net.ConnectException: Connection refused (errno:239)
HTTP Status Code is: 900 (63,72)
Error getting report repository location. (63,85)
SchedulerTransfer Servlet error. (63,74)

CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

785GTM-E45 not POSTing after a week (Need help)

Hello guys and girls,
Good day to you.
I am new here as I just happily purchase my new MSI motherboard last week. Yay~
However, I am now currently facing problem in POSTing the PC after it was working beautifully for a week. Hope someone can help me as I have exhausted my testing/diagnostics options.
Some other infos that might be informative :-
1.) APS LED does not light anymore.
2.) No longer have successful POST beep anymore. (CPU Cooler comes on though)
3.) Of course the black screen.
4.) The last boot time, I remember seeing CMOS related error in the POST screen. After that loaded into Windows XP 32bit and I restarted the PC. Then the No POST happened.
My PC hardware components :-
CPU: Athlon X2 5000 (2.2GHz)
Motherboard: MSI 785GTM-E45 (ver 1.4) (No idea on how to check the BIOS as I can't even POST now)
RAM: I have 4 units working memory that I have tested to be working in this motherboard before it is not POSTing.
a.) Kingston DDR2 667MHz (KVR667D2N5/2G) [1 Stick]
b.) Mushkin DDR2 800MHz [1 Stick]
c.) Corsair Dominator DDR2 1066MHz 2x1GB Kit [2 Sticks] (using this one as the main before it failed to POST)
Graphics: Using onboard
PSU: Seasonic S12D 750W
a.) +3.3V = 24A ; +5V = 30A. (150W)
b.) +12V Combine = 62A (744W)
c.) -12V = 0.8A (9.6W)
d.) +5Vsb = 3A (15W)
Diagnostics that I have done :-
1.) Checked whether the motherboard is touching the casing which will ground it. The motherboard is screwed on the standoffs with a 1.5cm away from the case. Checked the motherboard edges, not touching the casing either. Checked whether is there any screws that are short-circuiting the motherboard, nothing there as well.
2.) Unplug the HDD and ODD. No POST as well. Plugged the HDD and ODD to another computer, it works.
3.) Triple checked the power connections in the PC. No POST. After that plugged my Seasonic PSU to another computer to test. It was working.
4.) Plugged another working PSU (Xigmatek 550W) from a working PC. Quadruple check the power connections is correct. No POST still.
5.) Test the memory DIMMs with different slots (all 4 of them). Installed one at a time and each time is in different slot. No POST still. Tried the board with NO memory, it beeps non-stop (Good news it is still working?)
6.) Did the Clear CMOS method according to manual. No POST still.
7.) Checked the monitor by plugging into another computer and see whether is it faulty. Is working.
8.) Retest all the memory DIMMs in another PC. All 4 DIMMs is working in another PC.
9.) Carefully remove the CPU and reseat the processor. After that retest all the 4 memory DIMMS (No matter which slot). No POST still.
10.) Disassemble the motherboard from the casing and other components to checked whether the capacitors are bad. Didn't detect any.
11.) Plugged in a working graphic card to check whether the onboard graphic is faulty. No POST still.
So now, I think I am left with 2 possibilities. The processor or the motherboard, however, the motherboard was the one showing symptoms based on the LED thing. So I am siding towards the motherboard is faulty?
I am out of ideas now. Hope someone can help me.

Yes, the CPU power is connected. both the 4 pins and 24 pins.
Some updates, I went to buy a Sempron 140 processor to test just for the sake whether the mobo works.. I just burnt some money on it.. it won't work.. Brought the motherboard back to the shop, they tested it and it is faulty.. so warranty claim. Guess I wont have a mobo for sometime..
Consider solved and I just burnt some money buying a spare proc which I think I wont be using also. haha.
Thanks for everyone who attempted to help me.

System does not post after Bios Flash

After using Live Update to flash my Bios to the new version, the computer does not POST. The Bios Flash was successful - it rebooted and started normally. When I tried to restart it the normal way, it will not boot. The fans run when the "power on" button is pressed but nothing more. I cleared the CMOS using the jumpers but the problem was not solved. Can any one help?
Can some good Samaritan give me a step by step method to resolve this problem?

I followed the link you provided and managed to resolved it:
1) Removed one memory stick and floppy;
2) Cleared CMOS and rebooted successfully;
3) Inserted floppy and reverted to the previous BIOS;
4) Inserted the other memory stick and brought system back to full power again.
Thank you very much for your assistance. I am sure MSI is aware of the problem and will take steps to rectify it ASAP

K8N Neo4 Platinum 7125 not posting after overclock testing okay

Hi Guys,
I'm having a real stinker of a problem with my 7125 board. I have all good components, but can't seem to get this bastard to post reliably when I'm overclocking. I was thinking that it was my power supply so I bought a new Antec Neo3 650W supply and it doesn't matter. I also got a new Opteron 165 processor and it still has problems. I even RMA'd my board and then sent me a new one. Here is my setup.
7125 ver1
Opty 165
Crucial PC3200 Ballistix
Nvidia PCIE Gforce 6200 video
Antec Neo3 650W
2x Seagate SATA 80gig (matched) 7200.9
RAID 0 via the SIL 3114
extra 160 gig HD (using the Nvidia SATA port)
Pioneer DVD 109 DVDRW - pri IDE
Sony DRU-820A DVDRW - sec IDE
Hauppauge PVR150
3.5" card reader (connected via internal usb header)
Lian Li case
When I run the system at stock speeds everything works fine, including the initial posts.
However, when I overclock, everything is erratic. Sometimes, I can overclock the entire system to 290x3, 166, stable memory settings, and prime 95 orthos the out of it for days on end (max CPU at 49C), but when I select restart in windows, it shuts down fine, but will subsequently not post. I have to hit the reset key several times, then it recovers itself and undoes the overclocks.
I have tried all sorts of memory timings from the crucial info - it recommends 2.8V and 2-2-2-8 timings.
I have heard that my memory is good for overclocking, but I'm now starting to wonder if it is the MSI Neo4 board or the Nvidia Nforce 4 ultra chipset.
Could it be the Raid 0 on the Sil 3114? I haven't messed with this as I would rather have a RAID 0 setup, then a little overclock.
Is there a good NF4 ultra board out there that is better than this?
I can't imagine anything else to do except keep spending more money to eliminate more variables.
Your thoughts? Thx Nick

relax your CPU HTT freq. by 10-20Mhz and retest.
relax your memory timings e.g. from 2-2-2-8 to 2.5-3-3-8, to findout from where its comes then find optimal settings.

Z77-GD55 not posting after Win8 Update

Hi folks,
i´m in need of help as i am done with my knowledge here. After i updated my PC to Win8 it sometimes didn´t boot up. After 4x-8x restarting unplugging etc it went back to working normal. Today it got stuck in a boot loop. Before the update i swapped the memory sticks into different banks, as otherwise the heatsink wouldn´t fit, so now they are sitting in bank 2 and 4. Besides that the Soundcard went from the uper PCIe slot in one of the lower ones. I already tried swapping memory modules, disconnetcing all devices, unplugging GPU, HDD, and the Sound Card. Result so far is either a boot loop, meaning the PC seemingly powers up, all vents running and then restarts or inbetween i got a 3x times beep. Now i´m cluelesse.
Any ideas ?
Thanks a lot !!

Quote from: Bernhard on 20-February-14, 18:01:34
Strange analysis and assumption indeed.
You had a working board. You load the OS and now it doesn't work. The only known change was the OS.
With Win8 not being able to write and embed its serial key to the BIOS, I wouldn't be surprised if that caused BIOS corruption.
I think he indicated that he broke it trying to fix this issue. It just wouldn't load the OS then he re-seated everything and it boot looped.

Gr is not posted after the conformation of Production order take place

Hi Gurus
I have created production order and conformation take placed but goods movement (GR) is not get posted. Stock quantity shows zero.
1.      I have set 'auto goods reciept' indicator in Control Key .
2.      Opl8 transaction for GR for production order.the indicator is active.
3.      I have set 'auto goods reciept' indicator in production scheduling profile
Pl give the solution
Narasingam

Hi Rohit
I have checked in COGI . i got message lile "cost element 875000 is not maintained at 30.07.2009 for controlling area T010"
Then i have created cost element .
I have already given storage location for FG material
I have checked the routing with Auto GR control key.
I have assigned only one operations in routing
But
I can able to post GR using mb31
Document 11058 posted
Regards
Narasingam

WIP not cleared after TECO and KKAX run

Hello all,
I am facing a problem in clearing the WIP.
The process order is of 11600 kgs,Delivered is 11681kgs.User confirmed qty for 11600 kgs and later issued the 81 kg through MB31.
I made the order TECO and run transaction KKAX.Still it shows WIP for the order exist (CORM).I tried make the settlement,(KO88).It shows no accured amount,settlement not possible.
Please guide me how to proceed with this issue .Looking forward to get your valuable suggestions.
Thanks in advance
George

Hi,
From ur given situation it seems that order quantity is 11600 and against that you have made gr of 11681 that means 81 kg extra you have made gr .
In the above case the system will not give status teco to the order so you have to change manually order quantity to 11600 or if this is not possible then you see the quantity in the delivered section it will come as 11600 and for next 81 kg you create a fresh order and then against that order you should make gr of 81 kg .
then system will settle the variance amt. and it will give teco status to order also then your WIP amt will get nullified .
reward points if you find it useful.

K8n neo4 will not post after spyware removal

Hello all
I ran spybot this morning and 3 objects it found were in memory and required a reboot to remove. I selected restart and and the machine shut down .... it came back to the platinum screen and there it sits. I have powered cycled the box no change. I cannot even boot from a floppy. I cannot access the bios. its as if it did not completely finish coming down before the restart.
I have a k8n neo4
amd 64 athalon
1 gig ddr memory
sorry I dont have all my info in front of me I am at work.......
Any thoughts on what I should try. I am not sure if this is tied to the spyware removal or simply an unfortunate incident.
Thanks in advance
Jim

Hello all:
Well I did not expect this but I had left the computer unplugged all day while I was at work and when I came home and plugged it in and powered it up all came up normal. I dont really get it, but I am glad it is operational... I will be taking a close look at everything and if anyone can think of what may have occurred let me know what u think....
Thanks to all who made suggestions...
Jim

P7N SLI FI not posting after 1600mhz fsb

I can get stable at 1500fsb, 800mem on a c2d e6300. But when I reach 1600 it won't post. Any help would be appreciated. My system specs are:
E6300
Corsair DDR2 XMS 800mhz 4 4 4 12 2t, 2.1v
OCZ Gamestream 700w PS
Nvidia gtx260

It all depends on which E6300 you have and did you ever think about the fact your cpu doesnt do a FSB of 1600??
If you have the 2.8GHz version, its rated @1066MHz fsb, with 10.5 multiplier, so when you do 1600Mhz, its gonna be 10.5*400=4.2GHz!!
Even for a 45nm C2D thats a lot.
You say you can do 1500MHz, so thats 10.5*375=3.94GHz already, so even if you get it done, you'll hardly notice the difference.
So its prob not the board but the cpu that has reached its limit.
Just because some dude in the world gets it done, doesnt mean you can do it too you know.
Even if you have the 1.86GHz version, the 65nm Conroe C2D, it also can be you reached the limit of the cpu, cause then it would be 7*400=2800Mhz
and that would be a 1GHz overclock on a budget cpu.
I know it can bedone, but I havent seen many get there without troubles and a lot of testing and trying.
But hey, if you dont have the patience, overclocking isnt your thing, cause you need a lot of patience and time.
It not just pressing the numbers and presto, it works.
Oh and 1 more thing, its a USER to USER forum, so it takes time for people to answer, cause the most here have a normal dayjob/life and do this on the side.
So no-one here works for MSI or has anything to do with MSI, besides running this forum.
Also MSI personell/staff/techs dont ever post here, they seldom do, so ranting about customerservice and badboards is useless here, cause MSI will never read it.

MOVED: X58 Pro not POST after flashing new bios v7.1

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=125154.0

Quote
system is rock solid through overnight stress testing at my current speed/timings, so i didnt complain
Yeah, it often happens, that the system runs fine during stress tests, but has problems to boot-up properly when there are memory related problems (initialization problems).
Quote
do you think my memory is defective in some way?
Not necessarely defective. The question is what the native speed/timing ratings of the memory chips look like. Also, DDR3-1066 is actually the max. memory speed that your CPU's memory controller natively supports (according to Intel Specifications). So it is good to start testing here (does not cost anything and is not risky either). If the system starts fine @lower memory clock speeds, we will know more.

QTP crashes after long cycle runs

Product name: QuickTest Professional
Product version: 11.00
Product ID: QTPRPID11.00/01
Product build: 1018
Operating system: Microsoft Windows 7 Service Pack 1 (Build 7601)
Internet Explorer version: 9.0.8112.16421
Addins Used
.NET
Web
Problem Statement
QTP Crashes after running successfully for 180 Hours (36 Cycles)
Script Started Time - 2014-05-05 04:33:20
QTP Started to Hang Time- 2014-05-11 17:12:04
We need your Expert Advice for Improving the Performance of the QTP,
Suspect –(Possible Causes)
We would like to know , if the below mentioned setting would affect the performance of the QTP scripts in any way?
We are currently having the 2 major vbs files in QTP Scripts. Each vbs File has around 17000 lines of Code with around 160 functions. And these are loaded at the Beginning of the Automation scriptrun (Not Run Time)
And we load shared Repositories at the start of the QTP run which is about 20MB.
Will this below Corrective action Help?
if we implement the below changes, will be any considerable improvement in the Performance ?
By reducing the No. of lines in the VBS file by splitting the 17000lines VBS File into smaller Files
by loading the Functions and the Repositories in the Run Time Dynamically.

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Checks are not generated after Automatic payment run

Hello,
I have a strange issue. Payment has been executed normally through APP. However some of the checks are not printed and it is not gone to PAYR table as well. I can see the payment documents in REGUH table and the documents have been cleared. This is not a new vendor and the check payments have been made to this vendor through this process.
Could you please suggest what could have gone wrong as PAYR & REGUH table and payment list from ZF110 must match. Here it matches only REGUH & Payment list from ZF110. The vendor has been asking for the payment and we realized this issue
Thanks
Ivan

Please check if relevant print variants have been assigned in the relevant check print program (RFFOUS_C for e.g.). If you have posted in 3 company codes and assigned check print variant in only 2 company codes, then some of the checks will not be printed even if the payment document has been posted.
As part of business process, it is always useful to print the payment list and reconcile atleast if the number of expected checks have been created.
Ron

Result Analysis(WIP) not posted after 4 cycle run

Similar Messages

Maybe you are looking for