Result Analysis with transaction code KKAJ for Top level WBS element

Hi Experts,
we have four level WBS structure with level 1 and level 4 with all operative indicators active
when we are doing Result analysis by using KKAJ for level 1 WBS element, System is taking all level 4 wbs elements also into consideration.
Is there a way to run results analysis using KKAJ only for level 1 wbs elements for multiple projects, avoiding the level 4 WBS elements.
SAP version 4.6C
Please suggest.
Thanks in advance
Chakravarthy

Hi
refer this thread posted a few days back
Ajay M

Similar Messages

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Using transaction code KEAI for CO-PA to FI validation

I wanted to see if anyone has experience using transaction code KEAI (Analysis of Value Flow FI-COPA). I know there is also transaction code KEAT for SD to CO-PA to FI validation. However for our needs KEAI seems a bit more user friendly. I have not really found any documenation on KEAI online or in SAP help. The program for this transaction code is RKE_RECONCILIATION_FI. Does anyone know the key difference between KEAI and KEAT. Any input you have would be appreciated.

KEAI is analyzes all value flows to CO-PA as against KEAT which deals with Transfer of Billing Documents.
The reconciliation covers all record types - A to I and Z (PA postings only)
You can restrict the report for components like - billing, CO objects, FI Docs
You can see the result by all documents, documents only with delta, documents only with delta to CO-PA
You can display summarized report if required and expand.
The output shows delta in detailed columns like - Account / Source Document / PA Value Field, FI Value, Document Value, PA Relevant Value, CO-PA Value, FI Doc. Delta, PA Doc Delta, Crcy.
The report is collapsible - company code > account > Document > Value Field

How can i declare a selection screen in a DP program with transaction code.

hi friends,
How can i declare a selection screen in a DP program with transaction code. What are the events and flow logic..

Search in SCN/Google for Module-pool programming basics.

Transaction code creation for a report group

Hi all,
I created a transaction code ZF17 for a report group FI02 with the following parametrs.
Transaction: START_REPORT
checked the skip initial screen check box.
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = FI02
When i tried to run the T-code ZF17, it gives me
a message : PROGRAM FI02 doesn't exist
Any ideas why this message comes up?
Thanks,
Sobhan.

I would think that its looking for a program name in the D_SREPOVARI-REPORT field, FI02 is not a program name.
Regards,
Rich Heilman

Objects to be added manualy with Transaction code

Dear all,
There are certain transaction code required for Purchase Order Release. ME29N, ME28. After that also we have to add some objects Manually based on su53 log.
Is it possible to identify which OBJECTS are required to add for specific transaction codes?
Thanks in Advance,
Nirav

Simple way is T-code su24
In T-Code su24 CM-Check maintain is sap default object those objects are must we have to provide all those objects ,while adding T-code automatically default objects will add.
C-Check same T-Code can check this objects also if required depends on our process but this not mandatory this can call background only any one of this check objects.
Some time if your are not provided proper value to existing objects then it will call some objects field name field value which is not relevant to us.(Ex.S_tabu_disp,S_develope)
Better check the error and su53 dump then think whethrt this is relevant to this or not then provide, but max we should avoid manual objects. Manual objects will not pick the values from origination level
Some T-codes ,calls some other T-codes also in background.
Some customize report or standard report are modified report also call some T-Codes are authorization objects dependents on the report this you can find out with the help of ABAPer or you can check if you have se38 or sa38 ,go to that ABAP program find u201CAUTH u201D then will know the object .that objects needs to insert manually in that particular role.

How to create transport request with Transaction Code

hi,
i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code.
Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go to this path*UTILITIES -> VERSION MANAGEMENT -> * it shows me the request which i have transport it.So i want to make a new request with Transaction Code included in that request.Kindly guide me where i can make this request.
Thanks.

hi,
Goto se93 give your tcode and press chagne,after entering into it make some change and click on save, it wil ask for TR. Save it and export it to quality.
Regards
harris

How to run the Transaction Code - BIC for Bank keys uploading

Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
Indu

Go to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks.

Different transaction codes useful for Performance Monitoring

Hi Experts,
Please can you guide me on this question, as to what are the different transaction codes useful for Performance Monitoring i.e. workload statistics and database statistics? What kind of statistics do each of these codes provide?
Many thanks,
Mithun

Hi Mithun
In performance issuses you need to look in terms of many ways that is..
Workload analsys
ST03N: Statistics Regards Locallly
ST03G: Statistics Regards Golbally
STAD: Individual Statistics Regards
STATTRAACE: Individual Statistics Regards Trace
ST07 : User Distribution
Buffers and Memory
ST02 : Buffers and Memory and swaps monitoring
ST10: Table Acess
OS Monitoring
OS04: Locally monitoring
OS07: Remotely monitoring
OS01: LAN check
DataBase Side
ST04: Performance overview
DB01: Exclusive locks
DB02: Tables/Indexes
BackgroundJobs monitor
SM37
other tcodes
ST22: Abap Dumps
SM12: Lock Entries
SM56: NumberRange Buffers
SU56: User Buffer
all above transactions are need to monitor for Performance.
Regards
Bandla

EMIGALL, DEVINFOREC - probs with reg.codes/factors for multiple registers

Hi, guys!
I have a problem with the migration object DEVINFOREC in EMIGALL. When I try to create a device info record with two registers, I don't get the fields register code (field KENNZIFF in structure DVMREG) and register factor (ZWFAKT in structure DVMREG) updated for the second register!!! The first register is OK, but for the second one, "nothing happens".
I'm using the flags KENNZIFF and ZWFAKT in structure DVMRFL. The problem I have here is, that it seems that only ONE entry of the DVMRFL record is allowed and therefor I can only update the first register (I think!!!).
When I tried to create an extra DVMRFL record with register number 002, I get an error saying:
Data error in automation data of device modification
Message no. EN262
Diagnosis
An error occurred in table reg_flag for automation data. The following lines are unpermissible.
Date 01.01.2001 - 31.12.9999
Equipment (device) DEV_0001
Register 002
This is the input file to EMIGALL for DEVINFOREC:
900000000012345682     DVMINT     01     E02     DEV_0001
900000000012345682     DVMDEV     DEV_0001     4416     E02
900000000012345682     DVMDFL     DEV_0001     E02
900000000012345682     DVMREG     DEV_0001     E02     001     E10     10,00000
900000000012345682     DVMREG     DEV_0001     E02     002     E11     10,00000
900000000012345682     DVMRFL     DEV_0001     E02     001
900000000012345682     &ENDE
In the file above I would like to create a device info record called DEV_0001 with two registers with register factor 10 and with register codes E10 for register 1 and E11 for register 2.
When I look at the device info record in trx EG43, I can see that only the first register is updated correctly. For the second register the register factor is 1 and the register code is empty.
Suggestions, anyone?
Thanx in advance!
With regards,
Tony
Edited by: TonyN64 on Apr 27, 2011 9:45 AM

Hi Tony,
Migration was ok for this object (DEVINFOREC).
Maybe this will help you (customer structure of DEVINFOREC object):
We suppose that material(MATNR) generic used for creation of device inforecords is called 'DEVINFOREC'.
DataType:     DVMINT
Fld                       CTyp DTyp   DLen    To      Short descriptn.
KEYDATE                   3     DATS        8          Key Date for Selection According to Time-Related Validity
SPARTE                    2     CHAR        2          Division                           --- constant: 02 -gas
MATNR                     2     CHAR       18          Material Number             --- constant: DEVINFOREC for example
GERAET                    3     CHAR       18          Device
DataType:     DVMDEV
Fld                       CTyp DTyp   DLen    To      Short descriptn.
BIS                       3     DATS        8          Date at Which a Time Slice Expires
AB                        3     DATS        8          Date from which time slice is valid
GERAET                    3     CHAR       18          Device
MATNR                     2     CHAR       18          Device category                        --- constant: DEVINFOREC for ex
EGERR_INFO                3     CHAR       30          Information Field of Device Info Record
DataType:     DVMDFL
Fld                       CTyp DTyp   DLen    To      Short descriptn.
BIS                       3     DATS        8          Date at Which a Time Slice Expires
AB                        3     DATS        8          Date from which time slice is valid
GERAET                    3     CHAR       18          Device
MATNR                     2     CHAR       18          Device category                    --- constant: DEVINFOREC for ex
EGERR_INFO                3     CHAR        1          Indicators
DataType:     DVMREG
Fld                       CTyp DTyp   DLen    To      Short descriptn.
GERAET                    3     CHAR       18          Device
MATNR                     2     CHAR       18          Material Number            --- constant: DEVINFOREC for ex
ZWNUMMER                  3     NUMC        3          Register
BIS                       3     DATS        8          Date at Which a Time Slice Expires
AB                        3     DATS        8          Date from which time slice is valid
CALOR_AREA                3     CHAR        8          Calorific value district
DataType:     DVMRFL
Fld                       CTyp DTyp   DLen    To      Short descriptn.
BIS                       3     DATS        8          Date at Which a Time Slice Expires
AB                        3     DATS        8          Date from which time slice is valid
GERAET                    3     CHAR       18          Device
MATNR                     2     CHAR       18          Device category         --- constant: DEVINFOREC for ex
ZWNUMMER                  3     NUMC        3          Register
CALOR_AREA                3     CHAR        1          Indicators
Bellow is a sample of 3 records from a file which was imported:
K10073     DVMINT     20080101     K10073
K10073     DVMDEV     99991231     20080101     K10073     BL. B1 SC.2
K10073     DVMDFL     99991231     20080101     K10073     BL. B1 SC.2
K10073     DVMREG     K10073     001     99991231     20080101
K10073     DVMREG     K10073     002     99991231     20080101
K10073     DVMRFL     99991231     20080101     K10073     001
K10073     DVMRFL     99991231     20080101     K10073     002
K10073     &ENDE
K10074     DVMINT     20080101     K10074
K10074     DVMDEV     99991231     20080101     K10074     BL. B1 SC.3
K10074     DVMDFL     99991231     20080101     K10074     BL. B1 SC.3
K10074     DVMREG     K10074     001     99991231     20080101
K10074     DVMREG     K10074     002     99991231     20080101
K10074     DVMRFL     99991231     20080101     K10074     001
K10074     DVMRFL     99991231     20080101     K10074     002
K10074     &ENDE
K10075     DVMINT     20080101     K10075
K10075     DVMDEV     99991231     20080101     K10075     BL. B1 SC.4
K10075     DVMDFL     99991231     20080101     K10075     BL. B1 SC.4
K10075     DVMREG     K10075     001     99991231     20080101
K10075     DVMREG     K10075     002     99991231     20080101
K10075     DVMRFL     99991231     20080101     K10075     001
K10075     DVMRFL     99991231     20080101     K10075     002
K10075     &ENDE
Service module for DEVINFOREC object is: ISU_S_SMALL_DEVICE_CREATE
with following parameters:
Export
X_DEVICE     EMG_DEVMOD_INT-GERAET
X_MATNR     EMG_DEVMOD_INT-MATNR
X_DEVISION
X_KEYDATE     EMG_DEVMOD_INT-KEYDATE
X_UPD_ONLINE     U_ONLINE
X_NO_DIALOG     N_DIALOG
X_AUTO     AUTO
X_OBJ
X_INT_NUM
X_EXT_NUM
Import
Y_DB_UPDATE     DB_UPDATE
Y_EXIT_TYPE
Y_EQUNR     EGERR-EQUNR
Y_DEVICE
Good luck,
Catalin

Tool Tip for Top Level Navigation - EP6SP2?

Hi,
Is it possible to provide tool tip for top level navigation.
We have only one level TLN and Detail Navigation. On mouse over of TLN objects is it possible to provide tool tip?
Thanks.

Hi Raja,
as Pankaj stated, the NavTagLib is the answer - but: it needs the LightFrameworkPage. And both together at the moment for example doesn't support Collaboration, means, if you click on some room, bang, error messages and nothing does work as expected.
If you don't need CollRooms, you might give it a try.
In addition, you can check out the "Hover effect", see http://help.sap.com/saphelp_nw04/helpdata/en/53/a16a3e54a2e946e10000000a114084/frameset.htm - it's probably not really what you want, I just want to point to that possibility (working within the standard framework page) for a complete overview.
The last possibility is to modify com.sap.portal.navigation.toplevel; the TLN entries are rendered through toplevelnavigation.js, methods printLevel/printLevel1Table/printLevel2Table.
Hope it helps
Detlev

Budget Control at top level WBS only

Hello All,
I have a requirement from client where I need to activate the Budget control (90% warning and 100% error). I have done the setting accordingly.
Now the scenario is such that when client is doing budgeting, they are allocating the budget only at top level WBS (they have a different legacy, where they are doing there detail planning n budgeting, but since they want the feature of budget control in PS, they will do minimal budgeting in PS). As per my settings when I budget top level WBS and save the availabity control is activated (with no budget on lower level WBS). Now when I try to do some postings/or assign that WBS to PO, even with a value of 1 USD, i am getting an error of budget exceeded, which is fine as per the settings as that WBS is having 0 budget.
The requirement from client side is such that they want AVAC to be activated only at top WBS and do postings to lower WBS. But if the total of lower WBS exceed the budget of top WBS, they should get an warning or error. For example:
WBS level BUDGET ACTUALS
1               100
2                              50
2                              50
so as soon as the actuals touch 100, the system should give an error/warning. Note that the 2nd level WBS are not budgeted in SAP, so budget is 0 on them.
I have 2 questions:
1.Is it possible to activate AVAC only for top WBS ?(without any enhancement/development)
2.How the AVAC will work, if the total of 2nd level WBS exceeds the budget of top WBS (as explained in example above)?
Awating your replies.
Thanks
Sarang

Thanks Virendra, it was useful.
I tried other way round also i.e. by not marking the release tab in OPS9 and activating AVAC in CJ30.It works in that way too.
For my other question, regarding activating AVAC only at top level, we can achiebve that by using transaction control in user status.
Thanks
Sarang

Budget control at top level Wbs

Dear PS experts,
we have a requirement to have budgets distributed from top level wbs to level 2 wbs and all transactions to happen at level 2 wbs, but only budget availability check to happen at top level. can you please let us know if this can be aceived.
Thanks a lot.
Regards,
Veera

Try this:
Exclude the level 2 WBS elements from the availability control by creating a user status profile (i.e., availability control business transaction is not allowed) and assigining the status to all WBS elements except your top level.
Please search the forum if you need help on creating the user profile for Object Type WBS (T code OK02).
Regards
Sreenivas

Updating Prod Hierarchy field for all 2 & 3 level WBS Elements

Dear All,
My requirment is to update Prod. Hierarchy field for WBS element. Here in input i give 2 level WBS Element with respective Prod. Hierarchy then my program should update the Prod. Hierarchy for 2 level and 3 level WBS element under it automatically.
I hope we need to use bapi BAPI_PROJECT_MAINTAIN.
If any one had a sample code please reply with the attachment.
Thanks & Regards
NSK

Hi Afzal,
In which table the Left Right Up Down WBS elements are maintained.
Regards
Shashikanth Naram

PO number and PO qunatity for a given WBS element

hello all,
in which table does PO number and PO quantity are stored for a given WBS element...
or do i need to use any function module....
i need to use it in an ALV report...
thanks in advance.....

For service PO's or material PO's you can get only by using PR reference.
for material you will be having only one PR for One material so there is no problem with Materials.
for ref find the below screenshot
for services number of activities comes under single PR so this is some critical to bring the datafor ref find below screenshot
as mentioned in the screenshot all the service numbers will come under PR 40 line item so by using PR 40 you will be creating PO ,
Pass order(NPLNR)/W.B.S.E(PS_PSP_PNR) in EBKN get BANFN & BNFPO pass this in EKPO for service PO's package number (PACKNO) will be updated by using this go to ESLL pass package number(PACKNO) and take package (SUB_PACKNO) and pass in package number(PACKNO) you will get the service items for that PO
Regards
Ambarish

Result Analysis with transaction code KKAJ for Top level WBS element

Similar Messages

Maybe you are looking for