Result code = -43    error message

I have this error message come up occasionally, does anyone know why?
Cheers
Nass

It's a generic "File Not Found" message. What were you trying to do when the message appeared?
Here's a thread which may help you more:
http://discussions.apple.com/thread.jspa?messageID=6055162&#6055162

Similar Messages

  • Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-0

    Hi all,
             I have found a error "Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-01'" while adding the DELIVERY document.
    I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
    Could anyone solve this problem. is there any setting which i am missing..??
    Regards
    Sandesh

    HI Sandesh,
    Check Sap note :1252328
    and also check below thread of similar issue:
    Re: 'Invalid Currency' error when attempting to deliver order
    Hope this will solve your issue.
    Thanks,
    Neetu

  • Trying to export my forms results to excel  error message is adobe can not save as the file is open

    trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location,   however, no other file is open.

    Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
    Larry Lakes,  Executive Director
    The HANDLE Institute
    [email protected]
    541-639-1588
    P. O. Box 6264
    Bend, OR  97708

  • Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?

    Hi,
    Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?
    {module_webformresults} is auto rendedered as a table with CSS IDs attached but nothing specific for the ERROR message - resulting in the error not being seen.
    The ERROR is triggered by a dulplicate User Name or Password.
    I tried using a JQuery text selector, but it does not work with the results for some reason.
    Any ideas?
    Attached is are the error results, see Username
    Thanks!
    P

    Hi Patrick,
    It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.
    Kind Regards,
    Alex

  • Exit code 20 error message when trying to install Master Collection 5.5. Please assist.

    I get Exit code 20 error message when trying to install Master Collection 5.5. Please assist.

    Installation and launch log errors | CS5, CS5.5, CS6, CC -
    https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

  • TS3276 Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Will I lose my emails I have on there? I have numerous client email files and can't afford to lose any of them. I do have everything backed up but I'm fearful of losing important client info. What if something happened during the back up and it doesn't have my files?

  • How find the ABAP code with Error message

    Hi
    How to  find the ABAP Code for Error Message?
    Example:
    Error Message: ZF026.
    Regards
    Odaiah Pelley
    Edited by: Odaiah Pelley on Aug 22, 2008 4:21 AM

    Hi
    Excellent Answer, I appreciate it.
    My question is with Error Message ZF026.
    How to find ABAP Code ?
    If I go for SE91 I will get same message as if I am getting error message.It is no use.
    Regards
    Odaiah Pelleyu

  • ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile

    OGG Version 12.1.2.1.0 OGGCORE_12.1.2.1.
    DB : 11.2.0.4.3
    I am getting below error.
    2014-12-31 09:53:09  ERROR   OGG-00868  Error code 1291, error message: ORA-01291: missing logfile
      (Missing Log File <unknown>. Read Position SCN: 2585.802983323 (11103293443483)).
    Our solution uses ADG and OGG
    We have source and target where ADG was setup . We later broke ADG setup and made Oracle DB's in source and target into standalone.
    As part of our solution during our deployment window ,we would break ADG i.e we would make both the source and target as independent DB’s with PRIMARY Read /Write mode.
    -Take Guaranteed restore point on Source DB so that we can flash back at later stage(so of now we have not executed flash back command)
    -Once ADG config is disabled we will start the OGG extract which is already configured before =We are at this stage where we are hit with errors and extract is not starting .

    Hi ,
    The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
    1. Archivelogs.
    2. Trail Files.
    Both should be retained to the needed / required level.
    Please execute the below query and check the status of the Extract / Capture process.
    The below query displays the information of each capture process in a database.,
    COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
    COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
    COLUMN SID HEADING 'Session|ID' FORMAT 9999
    COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
    COLUMN STATE HEADING 'State' FORMAT A20
    COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
    COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
    SELECT c.CAPTURE_NAME,
           SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
           c.SID,
           c.SERIAL#,
           c.STATE,
           c.TOTAL_MESSAGES_CAPTURED,
           c.TOTAL_MESSAGES_ENQUEUED
      FROM V$STREAMS_CAPTURE c, V$SESSION s
      WHERE c.SID = s.SID AND
            c.SERIAL# = s.SERIAL#;
    Also run this query to check, if the capture is waiting for which logfile.,
    COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
    COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
    COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
    COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
    SELECT r.CONSUMER_NAME,
           r.SOURCE_DATABASE,
           r.SEQUENCE#,
           r.NAME
      FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
      WHERE r.CONSUMER_NAME =  c.CAPTURE_NAME AND
            r.NEXT_SCN      >= c.REQUIRED_CHECKPOINT_SCN;
    The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
    Regards,
    Veera

  • RE: Code for error messages & for Multiple Selection at Selection screen

    Dear Friends,
    Following is the code to display PO created without Purchase Requisition Nos. Please help me with the correct code to display the error messages when PO No is entered with Purchase Requisition No & also a message should come when user enters some random or wrong PO NO.
                      Also, in the Selection-Screen I want PO NO, Purchase Org, Material, Plant & Date. So, please help with the code so that these options can also display the PO created without Purchase Requisition Nos.
    Waiting for your valuable replies,
    Suruchi.
    The Code is attached herewith:
    DATA: BEGIN OF itab OCCURS 0,
          ebeln TYPE ekko-ebeln,
          ebelp TYPE ekpo-ebelp,
          matnr TYPE ekpo-matnr,
          txz01 TYPE ekpo-txz01,
          menge TYPE ekpo-menge,
          meins TYPE ekpo-meins,
          banfn TYPE ekpo-banfn,
          END OF itab.
    SELECT-OPTIONS: s_ebeln FOR itab-ebeln.
    START-OF-SELECTION.
      SELECT * INTO CORRESPONDING FIELDS OF TABLE itab
             FROM ekko
                 INNER JOIN ekpo
                    ON ekkoebeln = ekpoebeln
                             WHERE ekko~ebeln IN s_ebeln
                                   AND ekpo~banfn = space.
      WRITE:/ text-001,
              15 text-002,
              25 text-003,
              40 text-004,
              70 text-005,
              85 text-006.
      ULINE.
      LOOP AT itab.
        WRITE:/ itab-ebeln, 16 itab-ebelp, 25 itab-matnr,
                40 itab-txz01, 60 itab-menge, 88 itab-meins.
      ENDLOOP.

    select-options: s_ekorg for ekko-ekorg.
    select-options: s_matnr for ekpo-matnr.
    select-options: s_werks for ekpo-werks.
    select-options: s_aedat for ekko-aedat.
    Check the PO numbers here is not necessary because you are using a select-option(range),  if something erroneous is typed, the program will simply not select it.
    This would be a different story if you where using a parameter.  Here you would do a check against EKKO in the AT SELECTION-SCREEN event.
    at selection-screen.
    select Single * from ekko
              where ebeln = p_ebeln.
    if sy-subrc  <> 0.
    message E000(00).
    Endif.
    Regards,
    Rich Heilman
    Regards,
    Rich Heilman

  • Code inspector error message please help

    Hi All i have used delete statement as shown below
    DELETE t_output WHERE  remain_invoice  NOT IN s_invo[].
    t_output is my internal table .
    Error message in code inspector is :Sequential read access for a standard table
    What should i do ?

    I think its better to avoid delete statements inside the loop
    instead of using delete statement inside the loop
    use
    delete table itab where condition
    or
    if u have to use loop at any cost
    modify internal table with flag=X
    and then delete all records from the itab at one shot using above statement
    Regards
    Vikas C

  • Rebate condition record T code VBO1-Error Message

    Hi,
    I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
    (This error has occured while i am testing rebate process in IDES and it happen while creating condition record for rebate agrement,After filling the initial values in T code VBO1 and when click on enter the above mentioned error message has come).
    Please give the solution to create condition record.
    Thanks in Advance
    Regards
    Praveen  P C

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

  • Looking for a Utility to map error code to error message

    Hi All
    I am looking for a utility that would map my error codes to corresponding error messages. If you know there such a utility, please point me to it. In addition, I am looking for a utility that would validates input -- eg. length, range of input. Thanks.

    In addition, I am looking for a utility that would validates input -- eg. length, range of input. Whatever you do, don't use asserts for this.

  • Transcation code for error messages

    hi all,
    what is the transaction code for getting the system error messages?And how can I create my own error messages?
    for eg: in a program, i want to show an error message to the user when the data is not showing up properly.
    thnx,

    Hi Sey Ni,
    <i>what is the transaction code for getting the system error messages?</i>
    Transaction code :- St22 
    For Short dumps and system errors
    <i>And how can I create my own error messages?</i>
    Transaction code :- Se91
    To check ny Existing 1 :-
    Message class - XS 
    Message Number - 001
    To create ur Own
    Create a Message Class ex:- Zmsg , click on Message tab
    here u can give message in front of number assigned say 001.
    check the following link:-
    http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801b3e454211d189710000e8322d00/frameset.htm
    U can call this message in ur ABAP program as under:-
    if sy-subrc = 0.
    MESSAGE <b>E</b>001(<b>zmsg</b>)."
    endif.
    E - Error message.  I - Information message.   S - Sucess message...
    001 - Msg. Number.
    Zmsg - Message Class.
    Press F1 for more help on message.
    Regards
    Sachin Dhingra

  • Oracle Form 9i - How to catch for error code and error message?

    Hello:
    I'd like to catch for error code such as ORA-20001, ORA-28007 if the form is not success. I tried TOOL_ERR.CODE and TOOL_ERR.MESSAGE, but it returns 0 and no message.
    Thanks in advance,
    TD

    I got it.
    Thanks,
    TD

  • How to find code responsible  Error Message generated in MIRO transaction

    Hi Gurus,
                    I have to find the code responsible for generating ERROR message in Miro tcode through DEBUGGING. Let me tell you the case...................
    In MIRO,
    We input
    In Basic data tab,
    Invoice Date,
    Posting Date,
    Reference,
    PO no. &
    Tax code as V5 ( VAT @ 8% )  in item data  & then
    In Details tab,
    We enter Business Area    & then
    In Payment Tab
    Baseline date        & then
    In Basic data tab
    We check the check box for Calculate tax &
    entered Amount     & then click entered .
    It displays GREEN button.
    When we click Simulate button & click post then it shows 1 message that " Invoice document still contains messages .".
    And then if we click Messages Button it shows " MSG No. & text -  Enter Bussiness area ."
    So the problem is though we input Business Area , still it shows message Enter Business area.
    So plz tell me how to find that code responsible for error message.

    Ashish- It is because, the error message is called using function module / BAPI. But Ideally when a developer codes to populate the structure of type BAPIRET2, he.she should also follow the following rule, to make the message traceable:
    "Populate BAPI structure for error message
    "Following code will not get called, but is for documentation for traceability.
    if 1 = 2.
      message e004.
    endif.
    That is why i said in my comment, if it is "coded properly" then we will be able trace
    Bottom line: you will not be able to find the program line using this approach.
    But now since you now the error message and number, you can go to the underlying program of MIRO (SAPLMR1M and SAPLFDCB)..click on the find button on the application toolbar, enter the message# and find..PLEASE SELECT THE RADIO BUTTON "In the main program".
    Hope this helps.
    Sajan Joseph.

Maybe you are looking for