Result Code= -48

I recently deleted a lot of data from a partition on my G4 that I use for my Logic songs and audio files. Since then I have been getting the following message box when i open, save or close logic songs and at other (seemingly random) moments while I'm working.
"File with specified name and version number already exists. Result code = -48"
I click off the box and continue working and there seems to be no further repercussions, although this is obviously a bit of a concern.
Has anyone got any suggestions on what has caused this, what the consequences of it are (if any) and how I can rectify the situation?
Cheers

I don't think any file names have a "/" in them. When the problem started I had not recorded any audio for a while - I was editing. I think it may have started after I changed the name of an audio file in Finder. I am starting to think that this was a very foolish thing to do...
Still, I'm not sure which file(s) are triggering it - the message is appearing in all of my existing songs and also any new ones I create. Would running project manager and deleting any duplicates found be a good way to go?
G4 867MHz Mac OS X (10.3.5)

Similar Messages

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Sniffer Result Code: 3 / CUDA-Problems since Mavericks update

Hey Guys, first, thanks a lot for helping / or checking this out.
I have this problem since upgrading to Mavericks from Mountain Lion.
After upgrading I noticed there is a CUDA-Panel in my System prefs - which was new to me, having the classic onboard ATI Radeon of my MacPro.
Starting After Effects since then results in:
Last log message was: <140735271506704> <GPUManager> <2> Sniffer Result Code: 3
Generating crash log, which may take a few minutes.
then OSX tells me AE has stopped working.
System Specs:
MacBook Pro
15 Inch,
Late 2011,
AMD Radeon HD 6750M 512MB,
OSX 10.9.2 (13C64)
So it's the classic on Board graphics card and nothing NVIDIA/PC-fancy.
What I've done so far:
Installed newest CUDA-Version (even though, the system prefs plane tells me it needs an update, even when downloading the newest from NVIDIA)
Deinstalled and installed the whole CC-Suite, cleaned it, made a new admin-user, deinstalled again, installed on the news user (same problem), installed on the old one.
CUDA-drivers deinstalled from within the terminal (killing all relevant NVIDIA.kext and GeForce.bundle files), rebuild the extensions files with kext-utility.
Used disk-utility in the system and by rebooting with COMMAND+R, checked the volumen and the permissions, nothing Adobe relevant came back.
I'm kinda very stuck here...
Any help would be very welcome.
Thanks

The problem is that you installed CUDA software on a computer that has no CUDA-capable hardware. Don't do that.
You must remove the CUDA framework from your computer. See the last part of this article:
http://blogs.adobe.com/kevinmonahan/2014/03/19/avoid-installing-nvidia-cuda-drivers-on-com puters-with-amd-gpus/

Shared Folder, Permissions, Result Code -5000

I've put a Logic 7.2.3 (961.9) file into the Shared Folder for a friend to also work on. I've adjusted the permissions of the file to read and write in all available areas. As my friend accesses the file from the Shared Folder, from his account, and engages record in the transport, a message pops up stating:
"Insufficient access privileges for operation"
result code -5000
can anyone enlighten me?
iMAC Mac OS X (10.4.8) intel core duo, 2 Gz processor, 2 Gz RAM

If the friend is recording using the Logic song file from the shared area, then the file has already been successfully read. More likely, is that the current path set to record files does not have write permission. So you have to make sure all paths that you are using have permissions to read - and some to write (like for recording). Beware that this could be dangerous; you may want your friend to recrod files to a different location.

Error message - Result code= -39

I'm getting an error message everytime I open an existing Logic song in 9.1.1.
It says, "Logical end-of-file reached during read operation, Result code= -39"
it doesn't seem to affect the song, but what the heck is it?

Ask your question here:
https://discussions.apple.com/community/ilife/garageband
where people who know about Garageband will, I'm sure, be more than happy to help you.

EXS 24 Logical end-of-file reached during read operation Result code = -39

EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try and fix I extracted two kits with the same name but oddly they are slightly different sizes and have different creation dates, one 2004 the other 2007 hmmm (one goes in Garage band for remix tools the other gets placed in 02 Electronic Drum kits) from the install disks using Pacifist hoping to replace corrupted files. NG. I also reinstalled all the samples from the LP8 install disk, still NG. Anybody have a solution. THanks.

To further clarify, the samples are all located in the folder Garage band/.../.../.../Sampler Files/Treated Percussion Sets/Perc-DnB+Triphop. They are used in the EXS24 Trip Hop Remix kit.exs. The 3 samples that seem to be causing the error are, YT2BGLRHTX02_3ue.aif, YT2BGLRHTX03_3ue.aif, YT2BGLRHTX04_3ue.aif. The kit is useless and my song is screwed up now that the kit will not load. Any ideas for a fix out there ?

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

AE error : GPU Manager sniffer result code 3

Hello everyone !
I'm French so sorry if my English is bad !
I've just installed after effect CC and media Encoder CC, but while it's starting, I get an error message !
<5840> <GPUManager> <2> Sniffer Result Code: 3
My Pc configuration is :
Geforce GTX 970M
Intel(R) Core(TM) i7-4710MQ CPU @2.50GHz
8go RAM
Service Pack 1 - Windows 7 x64 "Familiale Premium" (I don't know the name in English sorry)
Hard drive - 1 to
All the software are up-to-date ! (as you can see on my Screenshot)
Thanks for your help !

The most frequent cause for GPU sniffer codes on machines that run Windows 7 is when Service Pack 1 is not installed. Please check again to make sure that Service Pack 1 and all relevant Windows updates have been installed.
After that, update your graphics card driver.

Error -- Result Code -54 HELP PLEASE!!!!!!

I've been recording 10-20 minute stories on my macbook for a while now (I'm an elementary school teacher) and today I recorded a 45 min interview. I opened the new track and picked the real audio option and saved it to the desktop. I began to record it and checked in the middle and it was fine. When I finished, though, I tried to turn the recording off and it said "An Error Occurred. Result Code = -54". I don't know what to do! Did it "auto-save"? I'm a new mac user so I don't know much about macs. I'm scared to shut my computer off in case I lose all that information but now its been sitting with the colorful rolling ball for about 10 minutes.

"An Error Occurred. Result Code = -54"
a -54 is a permissions error. this could mean that your account doesn't have permission to read or write to a directory, or perhaps the "permissions" are set wrong. Try repairing Permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions
rolling ball for about 10 minutes.
unfortunately that sounds like, for whatever reason, GB has locked up (permissions repair can often solve this problem as well)
Did it "auto-save"?
there is no "auto save", however, if the data was written to disc, it may be salvageable. you may as well force quit GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#forcequit
because the data is either there or it isn't, waiting will not change that.
after you've quit GB, post back with the file size of the project

After Effects CC (2014) is unable to start: 1956 GPUManager 2 Sniffer Result Code: 3

I´ve just installed the Test Version of After Effects CC (2014) and when i´m starting it there is an error message: "After Effects Error: Crash during processing. Last protocolled report: <1956> <GPUManager> <2> Sniffer Result Code: 3". Now I´m only able able to click OK.
Informations:
System: Windows 7 Ultimate (64 Bit)
Processor: Intel Core i7-4770 CPU @ 3.40GHz
RAM: 8,00 GB (7.66 GB useable)
Graphics Card: Intel HD Graphics 4600
What should I do now???

Avoid installing NVIDIA CUDA drivers on computers without NVIDIA GPUs

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

Mainstage 2.1.3 - an error occurred Result code = -39

mainstage 2.1.3 - an error occurred Result code = -39 .
What does this mean.
How can I find out what error messages mean.
And what can I do to fix it.
My session became very unstable- previously saved versions (lighter ) were stable but still got error message which doesn't fill one with confidence.
HELP using this live !!!!
using motu traveller, 2x edirol PCR keyboards, behringer FCB1010 and touch OSC app on iphone.

Usually error -39 means a file not found error and it's a system error...
Would be nice to know when does it happens... maybe a exs24 sample not found? Or some component?
go to /Applications/Utility and start up "Console".
then run Mainstage and look at the messages you see in console. Chanches are you'll see a more detailed explanation of the error from mainstage.
Hope this helps.

Mac OS Error Result Code 1634955892

The subject error message is what I got when I tried to copy a DVD that would not play all the way using Toast, to se if I could recover. It says after exttracting the DVD and putting in the media that it cannot record because of a Mac OS error result code 1634955892. What the !!!???>> does this mean?

I found this reference to that error code, but it seems complicated to me: http://support.apple.com/kb/TA26910?viewlocale=en_US
So, I did more searching and found this:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2006-07/msg00364.html which is a sort-of explanation with no fix.
And this: http://www.tivoblog.com/archives/2007/11/18/roxio-releases-updated-version-of-to ast-popcorn-now-supports-tivo-92-leopard/
which seems to imply that Toast/Popcorn need to be updated for DVD copying.
Apparently this error code comes up when there are compatibility issues.
Have you tried extracting the DVD data using other software such as Handbrake, Ripit or MPEG Streamclip?

Mac OS Error Result Code 12082

Can anyone at all shed some light on this? Recently have been getting an error message when burning DVDs that says "Could not record the disk because of a Mac OS Error: Result Code 12082". OS is 10.3.9, error occurs on a 20" G5 iMac.
After searching through all the error code listings I can find none that have any info on that one, so would like to throw it out there for assistance.
Thanks
20" G5 iMac Mac OS X (10.3.9)

Hello Precise,
I found this on Roxio's support:
Mac Os X Error 18775
sorry if that is not related to your problem,
littleshoulders

Result Code= -48

Similar Messages

Maybe you are looking for