Result display in the first column.

Hi all,
My report displays some amounts per fiscal periods in column. At the moment I can display the Result for all the periods in the last column, but now I'd like to display this result in the first column. Do you know how to do that?
Curent report:
                  FiscPer1     FiscPer2    RESULT
WBS 1         10               30              40
WBS 2           3                1                4
Wished report:
                   RESULT     FiscPer1      FiscPer2
WBS1             40              10                   30
WBS2              4                 3                     1
Thanks!

Hello-
Go to Table display option in the designer and make your objects alignments as needed save and execute the same.
You can align the previous last column to the first coulumn( I mean rearrange the objects ) thru table display option.
Regards,
Vishwa.

Similar Messages

"Pie chart in pivot view showing only the first column's results" in obiee

Hi,
In my pivot view(pie chart view+pivottable),i'm getting only the first column's result in pie chart..
I have added a column named *'A*' in rows and '*moneyspent*' in measuresfield and the '*period*' in the columnsfield in the pivot view.I'm calculating the sum of
the rows and columns..
I'm not getting the sum valueof moneyspent in the pie chart..instead i'm getting only the first column of period in the pivot table in the pie chart.
can anyone tell how can i get the sum value of pivot table in pie chart?
Thanks in advance..

Hi Prash,
let me try to give you an example based on the paint sample:
Use Markets.Region, Products.Brand, 'Sales Measures'.Units
choose a pivot view to display the result: region goes into the rows-section, Brand goes into the columns-section and Units into the measures-section
In the columns-section add a total using the 'add total' at 'Measure Labels' level
the result is a total column on the right side of the pivot.
looking like this:
Units
Brands
Region Enterprise Magicolor Mccloskey Valspar Units Total
Central 1032.....
Eastern 1485......
Southern 824.....
Western 580
What I am looking for is a new column 'Units Total pct'.
If I duplicate the measure to show the values in percent, I'll get a second column per Brand (showing the absolute and percentage values) - that's what I don't want
Regards
Andy

Emacs is displaying the first column of the line on the last column of the previous line

The first column of my lines are being displayed on the last column of the previous line. This a very irritating glitch that I have no clue how to fix or even troubleshoot. (red bars were added using preview to hide personal info)
I've downloaded MacPorts and reinstalled emacs:
GNU Emacs 24.4.1
Copyright (C) 2014 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
I'm open to any suggestions on how to fix this graphical glitch.
Much thanks
Message was edited by: Conner_36

Given that the Emacs for OS X works ok and the Emacs shipped with OS X works it would seem to be some issue with MacPorts and their version.
Totally unfamiliar with MacPorts so have no idea how the program gets compiled,what libraries it is using and what if any config settings are needs or set so I'm afraid I won;t be much help there. That you are on a MBP with a retina display may be part of the problem.
So with the setup you have now, hardware and software including OS, it was working and then just like that it stopped? Something much have changed around the time it stop working if you can think back to then it might help you resolve the problem.
As you are doing programming can i assume you have Xcode and the command line tools installed? If not how do you compile your code? The reason I ask is compiling Emacs from there GNU source is not all that difficult. It might be worth trying that.
One last thing given that the two other versions of Emacs displayed the file OK this strongly suggests the problem is not in your .emacs file or your environment however as I wrote I am not familiar with MacPorts so it is possible there is another config file messing you up. As a test for this create a new user or log in as the Guest user (this is best as you;re guaranteed the environment is clean) and look at the file in question in MacPorts Emacs. If it displays OK then there is something in your environment causing this, If it messes up even in the new user then I'd say ditch MacPorts..
regards
<edit>
Just to rule out init files if you start emacs with the -q(minus que) flag the .emacs file is not read in, if you use --no-site-file it will not load the site file if it exists.
I'd try running the MacPorts emacs with those two flags to see f anything changes.

SQL Loader Inserts chr(13) and chr(10) in the first column of every row.

Hi,
I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
create table test_sql
a varchar2(30),
b date
insert into test_sql values('51146263',sysdate-3);
insert into test_sql values('51146261,sysdate-1);
EXPORTED PIPE DELIMITED FILE_
A|B|!##!
51146261|04/14/13 4:55:18 PM|!##!
51146263|04/12/13 4:55:32 PM|!##!
create table test_sql1 as select * from test_sql where 1=2;
CONTROL FILE_
OPTIONS(SKIP=1)
LOAD DATA
INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
PRESERVE BLANKS
INTO TABLE TEST_SQL1
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
A CHAR(2000),
B DATE "MM/DD/YYYY HH12:MI:SS AM"
select * from TEST_SQL1;
After this when I paste it in notepad I get the following result
A B
51146261" 14-APR-0013 16:55:18
51146263" 12-APR-0013 16:55:32.
I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
Thanks in advance
Regards

Hi Harry,
I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
A|B|!##!
51146261|01-01-01 10:10:10 AM|!##!
51146263|01-01-01 11:11:11 AM|!##!
Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
Regards,
Prithwish

Why is my ping so high in the first column only when i do a tracert?

When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
tracert www.yahoo.com
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
over a maximum of 30 hops:
1     9 ms     3 ms     3 ms
2 1101 ms    34 ms    38 ms 193.sub-66-174-20.myvzw.com [66.174.20.193]
3   169 ms    55 ms    52 ms 49.sub-69-83-13.myvzw.com [69.83.13.49]
4    52 ms    56 ms    54 ms 194.sub-69-83-13.myvzw.com [69.83.13.194]
5   179 ms    58 ms    57 ms 101.sub-66-174-17.myvzw.com [66.174.17.101]
6   168 ms    57 ms    60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
7   181 ms    58 ms    57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
8   170 ms    59 ms    58 ms 0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
9   177 ms    67 ms    59 ms ae11.edge2.NewYork.Level3.net [4.68.62.41]
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13   192 ms    49 ms    60 ms ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
14   185 ms    51 ms    60 ms YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
15   380 ms    73 ms   129 ms ae-5.pat2.bfz.yahoo.com [216.115.96.67]
16   339 ms    69 ms   146 ms ae-4.msr2.bf1.yahoo.com [216.115.100.73]
17   215 ms   152 ms    80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
18   289 ms   217 ms   217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
19   187 ms    87 ms    79 ms po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
20   474 ms   314 ms   294 ms ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
Trace complete.

hi there
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
http://www.dslreports.com/drtcp
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
http://www.dslreports.com/tweaks
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
good luck
ron
ps im not a vzw rep in any way other then a fellow customer not getting answers.

How do I increase the width of the first column in the Terminal ls -l command?

I am now running 10.9.x, but I've experienced the problem described in the question over the last several iterations of OS X.
I use bash as my interactive shell. When I display the "ls -l" command in Terminal the output is often very difficult for me to scan, because the columns in which are displayed the several fields of the records for the listed files are misaligned (different left-hand first-letter starting points for left-aligned text-valued fields; different right-hand low-digit alignment of numerical fields).
When I look more closely at the mess displayed in my Terminal window, it appears that the cause of the problem may be that no minimum width, or an inadequate minimum width, has somewhere been set or defined for the first column of each record, containing the file's "mode" string (permissions, etc.); for all records in which this string is of equal length, the succeeding columns for all fields in those records are themselves aligned.
It has not always been thus for me in the Terminal with OS X, or else I might not dream that the world could be a better place in this one respect. But if I launch an interactive csh-shell instead of bash in Mavericks today, the columns of the ls -l command there align no better.
I've found no help in the Unix man pages for the ls command. There is a COLUMNS environment variable whose value is supposed to be used by the ls command to set the width of every column displayed, but this is not what I want to do, and in my shell "ls -l" seems to ignore the exported variable anyway.
There is also an LS_COLWIDTHS environment variable that is described as setting column widths on a field-by-field basis, at least for some fields, but the the mode column is not included among those whose width is supposed to be adjustable, and my shell seems to ignore the value of this variable as well.
I've looked in my rather simple ~/.profile and ~/.bashrc files for anything that I might plausibly suspect of producing or perpetuating this behavior, but there is nothing there. Any suggestions about how to remedy this problem?
Randy Miller

John,
I would like you to perform a safe boot. On reboot, press and hold the shift key at the chime, until the grey horizontal bar appears. After you type in your password, press and hold the shift key again, then click the right arrow to login, and release the shift key when your desktop appears. Move the contents of your local ~/Library/Caches into the Trash. Reboot normally. Empty your Trash.
Re-evaluate your Terminal behavior. If it now works ok, great. Otherwise, here are a sequence of screen shots of my Terminal preferences for comparison. I can use both Courier fonts without formatting issues. Click to enlarge. I use the free IR Black Terminal theme as a personal choice in OS X 10.9.4. In my ~/.bashrc file (triggered from ~/.bash_profile), I export TERM=xterm-256color, and invoke /usr/bin/tput init. Click on the following images to enlarge.

All the data getting exported in the first column of csv while exporting

Hi All,
In 11.5.10.2, I have a page with advanced table region. Am using OA Framework's export button to export the results.
But, problem is, All the results are getting exported in the first column of the output .csv file. Why such a behavior?
Profile Option of 'Export MIME Type' value is text/text-separted-values.
Any ideas would be of timely help. Thanks.
Regards, Soorya

From OAF standpoint, it just exports the data. Data interpretation is completely dependent on client machine and excel setups.
Please check the Data-->Text to Columns wizard where we can specify the delimiter(s) on excel.
Not sure if this can be set up in Apps, so that we need not change on every end-user machine.
Hope this helps.
-- Thanks

Appending multiple *.csv files while retaining the original file name in the first column

Hi guys it's been awhile.
I'm trying to append multiple *.csv files while retaining the original file name in the first column, the actual data set is about 40 files.
file a.csv contains:
1, line one in a.csv
2, line two in a.csv
file b.csv contains:
1, line one in b.csv
2, line two in b.csv
output.csv result is this:
I would like this:
a.csv, 1, line one in a.csv
a.csv, 2, line two in a.csv
b.csv, 1, line one in b.csv
b.csv, 2, line two in b.csv
Any suggestions to speed up my hobbling attempts would be aprieciated
Thanks,
-SS
Solved!
Go to Solution.

What you could do is given in the attachment.
Started with 2 files :
a.csv
copy of a.csv
Both with data :
1;1.123
2;2.234
3;3.345
Output :
a.csv;1;1.123
a.csv;2;2.234
a.csv;3;3.345
Copy of a.csv;1;1.123
Copy of a.csv;2;2.234
Copy of a.csv;3;3.345
If you have more questions, just shoot
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012
Attachments:
AppendingCSV.JPG ‏73 KB

Using photoshop elements 13 for a brochure Drew the rectangle shape for the first column but when i go to use the move tool it doesnt highlite the rectangle box why?

Using photoshop elements 13 for creating a brochure -drew the rectanle shape for the first column but when i go to the move tool it doesnt allow me to highlite this shape why?

The faulting module is photoshop. Report below.
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
2/2/2015 4:54 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: Photoshop.exe
Fault Module Version: 15.2.2.310
Fault Module Timestamp: 5480338c
Exception Code: c000001d
Exception Offset: 00000000049de322
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 8db4
Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
Additional Information 3: f06d
Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
Extra information about the problem
Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000)

Char displaying only the first three characters in the cube

Hi Experts
I have a char with lenth 60 and it's active.I am updating this char via the update routine whereby i am reading data from an active table of an ODS as i update in the update rules.
But surprisingly,once the load is succesful and complete,upon checking the data in the active table it's displayin the way it should be the problem comes in when I view the data on the cube which displays only the first three chars even if the descriptionis a 60 character field.
Please help

Hi Herbert,
Have you checked in the infosource or transfer rules, what is the length of the infoobject, if you are loading the data to PSA, please check there it self, whether it is displaying 60 characters or only 3 characters.
Thanks
Sat

I used a code i got with my moive to download the itunes version and i was watching the itunes extras, but now when i click on "play itunes extras" it plays the audio but the only thing it displays is the first frame (the movie is catching fire)

i used a code i got with my moive to download the itunes version and i was watching the itunes extras, but now when i click on "play itunes extras" it plays the audio but the only thing it displays is the first frame (the movie is catching fire) i deleted the movie and reinstalled from my icloud backup and it still does the same thing. The actual movie works fine, its just the itunes extras

Hi there MickeyDresaj,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
-Griff W.

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

[ADF Faces] set cursor position to the first column input text in ADF table

How do i set the cursor position to the first column input text when i Insert a blank row?
My idea is to implement using javascript. document.setfocus() but how do i do it from the backing bean code? or how do i install custom js to call document.setfocus()?
any ideas?
Message was edited by:
user450391

Did you try by iterating the selected row?
Bind the table with the managed bean and then try with below code:
RichTable empTable;
RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter = bindings.findIteratorBinding("EmpView1Iterator");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while(selectedEmpIter.hasNext()){
   Key key = (Key)((List)selectedEmpIter.next()).get(0);
   Row currentRow = empRSIter.getRow(key);
   System.out.println(currentRow.getAttribute("Ename"));

(JTable) How can i get the first columns cell in a selected row?

Hello. I am trying to figure out how i can get the first columns cell within a selected row no matter what cell is selected in that row. I have a class that extends AbstractTableModel which represents the table. Now i have another class that extends DefaultSelectionModel. Each model is added to the JTable via setModel(TableModel dataModel), setSelectionModel(ListSelectionModel newModel). Now i don't understand what i have to return from getMaxSelectionIndex(). Any ides? Thanks.
class xTableModel extends AbstractTableModel{
     private static String[] cols;
     private Object[][] data;
        public void setTableModel(Object data[][], String[] cols){
         this.cols = cols;
         this.data = data;
        public String getColumnName(int col){
         return cols[col];
        public int getRowCount() {
         return data.length;
        public Object getValueAt(int row, int col) {
         return data[row][col];
        public void setValueAt(Object value,int row,int col){
         data[row][col]=value;
        public int getColumnCount(){
         return cols.length;
class ColumnListenerModel extends DefaultListSelectionModel{
     public int getMaxSelectionIndex(){}

int row = table.getSelectedRow();
Object data = table.getValueAt(row, 0);

Disabling validations if the first column is empty in an editable table

Hi ,
I'd want to disable validations if the first column in an editable table is empty - coz we'd assume that the user does not want to enter any data in the new row. How can this be done ?

Hi Viren,
It is correct that the first line for every Master Data is an empty row, if I am not wrong it derives from SEM settings.
1.If you have some rows with 0CUST_SALES without any attribute it is because you are uploading this MAster Data with a source that does not consider compound objects: it is surely a Transactional DataSource (you do not upload Attributes). So for every Transactional record for which you do not upload also compound objects the system creates a record in your Master Data that is not correct.
2. If you do not have Distr Channel update in Inventory Cube I think you must re-upload all your request starting from PSA. If you have deleted your PSA you can create a DataSource on your cube and feed once again your cube with its same data (built Update Rules that start from Cube and end in the same Cube). Make an upload of all your request and the delete all previous request.
Ciao.
Riccardo.

Result display in the first column.

Similar Messages

Maybe you are looking for