Result of running MRP

Dear all,
I have 3 production order of one material at the same day. So, when I run MRP for component, the system generate only one PR with quantity is equal require total of 3 production order. Open this PR, i see there are only one line item. I wonder that why the system does not generate one PR with 3 line item, each of them will be reserved for each production order?
Can you support me for this
thanks

Hello Hoai Vu ,
I am not very sure but check the Individual/coll (Dependent requirements ind. for individual and coll. reqmts) field in MRP-4 view , material master .
This Indicator determines whether the following requirements are allowed for the dependent requirements of the material:
Individual requirements
Requirement quantities of the dependent material are stated individually.
Collective requirements
Requirement quantities of the dependent material are grouped together.
I hope the information helps
Cheers
Kaushik

Similar Messages

Can we change MRP Run results after executing MRP. Can anyone tell me how?

Hi,
I want to change MRP rum planning results after executing MRP run. Is this possible??
Regards,
Thomas

Hi,
Yes, you can do changes. The MRP result will be the planned order. You can change the planned order qty and dates. Once you change the planned order manually, it will get firmed and the system will not do any automatic changes in that planned orders. You can delete the planned orders, but again in the next MRP it will create the new planned orders once the requirement has not changed.
Regards,
V. Suresh

PR not generating after running MRP

Hi Gurus,
System generate PR after MRP run where in material MRP Type is maintained as PD, but system doesn't create PR for those material which have MRP Type = VM. If I change the MRP Type to PD & then run the MRP, even then system doesn't create PR for that msterials.
My system most of the materials got MRP Type VM, suggest me the solution for this issue.
Regards,
Shantanu

1.MRP Type -VM , Lot Size -EX
2.Procurement Type -E for FG and F for ROH
3.Planning Startegy -10 or 40 in FG/SFG and 20 for componenet
4.Planned Delivery Time in MRP2 VIEW
Configuration : InSPRO -MRP -Check MRP Type -VM-check the details like Re-Orde point .Safety Stock both the automatic calcvualtion box are marked .
Finally as a sample test , select any material -mm02-execute forecast in mm02-forecasting view -exectute forecast -then save .Run MRP in MD03-1,1,3,3,1.NETCH indicator and check the result in MD04.

Run MRP and Collective Purchase Requisition

Hi all, I have a question for all. Very be kindly when receive your answer.
When I run MRP, the system will be generate one Purchase Requisition for one item in BOM (10 items in BOM). So, I want to collect all requirement in BOM to only one Purchase Requisition. Does the system can support for this scenario???
Thanks all

>
Hoai Vu wrote:
> Thank all,
> Your answer is helpfull for me, but not satisfy for my company. I have two maintenance order (MO):
> MO 1 from DIEN department have:
> Component A: 2
> Component B: 3
> MO 2 from CO department have:
> Component C: 4
> Component B: 5
> When I run MRP, the system generate 3 PR
> PR 1 for component A: 2 (from MO 1)
> PR 2 for component B: 8 (from MO 1 and MO 2)
> PR 3 for component C: 4 (from MO 2)
>
> So when the other department have a requiment for component B from CO department with quantity is 8, and the warehouse keeper will give 8 components B for CO department because they have a PR 2. So the stock of B is zero and we don't have material B for MO 1. I don't know why SAP does't have keep B and good issue only 4 for CO department. I wonder that why MRP generate one PR for component B instead of two PR.
> And the second question is how to configure sytem. Becaus when I create a PO from PR, the system does not assign PR number into account assignment
>
> Thanks all
>
Hoai Vu wrote:
> Dear all,
> I would like to update my question and hope that everybody support me to solve this problem.
> Thanks all
Dear Hoai,
What is the strategy maintained for header materials, i guess it is MTO ( make to order )
If the strategy is MTO then go to MRP - 4 view for all components and make it as 1
Then check the result
Regards
Madhu

How to run mrp and capacity leveling through heuritics.

Hi,
How to run mrp and capacity leveling through heuritics.
What are the setps required for production planning run this thing in the heuritics in pp/ds?
Regards,
Sunil

Sunil,
APO PP/DS doesn't have a 1-to-1 match for MRP/Cap levelling per se. There are, though, a limitless number of ways to achieve the results you want.
Start with a basic PP planning MRP - SAP_PP_002, which will should create all necessary planned orders
Then try a DS heuristic to schedule your orders according to capacity. Schedule Sequence SAP001 is a good starting point. This can be used to schedule your cap relevant work centers such that they fully load the capacity available, similar to cap levelling.
Rgds,
DB49

Running MRP, PO and PurRqs

Hi Gurus...
I have some doubts about a MRP Running. I have this scenario:
Material XXXX
MRP Type = PD
Procurement Type = F
Availability Check = 02
Lot Size = Ex
1.- I had an IndReq from 1000 units, then I run MRP (md02)
2.- The result was a PurRqs = 1000 units; I converted half-quantity from this PurRqs = 60 units.
3.- After on MD04 I checked:
a. PO = 60
b. PurRqs = 940 fixed (*)
c. IndReq = 1000
When i run MRP again the result was.
a. PO = 60
b. PurRqs = 940 fixed (*)
c. PurRqs = 1000 -
> New PurRqs
d. IndReq = 1000
why that has happened?
it's possible to changed that? or the problem is in the Scope of Check?
how I know what's the Scope of check using from procurement type F?
Thanks a lot!

Hi,
Go to OPPJ, click on your plant & you should be able to get the rule for your plant, also check the rule for your MRP group. Now in checking rule, you should be able to get the details of the rule.
Check & revert what values you find in the checking rule.
Regards,
Vivek

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

Material in two plants, I run MRP with the BOM is not found in prod plant

Hi all,
I have plant 1020 material 12345
Plant 1020 is the production plant for material 12345
The material 12345 exists in plant 1070.
The material 12345 in plant 1070 has no MRP.
Plant 1020 material 12345 config in MM03
MRP1 --> MRP Type = PD
MRP1 --> MRP Controller = G03
MRP3 --> Planning material = PLAN_1020_GR03
MRP3 --> Planning plant = 1020
Plant 1070 material 12345 config in MM03
MRP1 --> MRP Type = P3
MRP1 --> MRP Controller = 017
MRP3 --> Planning material = empty
MRP3 --> Planning plant = empty
The BOM in cs11 for plant 1020 material 12345
has 3 components
Comp#1
Comp#2
Comp#3
The Dependency is code
TABLE TB_1020_SUPERBOM (PP_nuance_interne = $ROOT.PP_nuance_interne,
PP_dim_billette_bom = $ROOT.PP_dim_billette_bom,
PP_CODE_LONG_BILL = $ROOT.PP_CODE_LONG_BILL,
pp_component_bom =$self.pp_component_bom).
The dependency is not found because it is looking for it in the plant 1070 and not the plant 1020.
When the MRP runs for a Delivery type stock transfer order I get
CONFIG_1020_BILLET <---- This is the BOM item component field in CS11 in the Basic data tab
Comp#2
Comp#3
instead of
Comp#1
Comp#2
Comp#3
When I run MRP for the same material, if there's no
"Delivery based on Stock transfert orders" the MRP associates the correct components
Hope this explains m'I situation.
Regards!
Curtis

Hi,
If you want a reply in one line, it would be SAP R/3 does not supoort this feature.
You will have to go for APO module.
There are few things which can be done in R/3 side, as in maintaining a scope for MRP run in OM0E, maintaining special procurement key etc etc, but all these will not do any check of stock in another plant & can only help in a very limited way if all any for your specific need.
But SAP R/3 provides a cross plant evaluation via MD48 to know the stock & demands at all plants, this can help only for evaluation purpose.
Hope it clarifies.
Regards,
Vivek

Ignore the number of schedule lines in sale order item when run MRP

Dear All,
I have a problem when I create production order (discrete manufacturing)
When I create a sale order with one sale order item and 3 schedule lines for this sale order item.
After that, I run MRP for this sale order, what I get is 3 planned orders for 3 schedule lines. It means that I will have 3 production orders for 1 sale order item.
I want create one production order for one sale order item whatever the number of schedule lines in sale order item.
I think I have to config in MRP. Please help me.
Thanks in advance

Dear
Check in OPPQ then look in Master data Availability Check & strategy for material also check whether u have maintained strategy for same material and see did u extended sales views for other material
As u said 3 schedule lines for this sale order item check whether u have extended sales views for next material
With Regards
Pushpalas

My macbook pro is running very slow after upgrading to version 10.9.1 Here are the results of running EtreCheck:

I am running very slowly after upgrading to ver 10.9.1 on my macbook pro. Can anyone help me to solve this problem. I am including the results from running Etresoft.
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.53 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          ChmodBPF: Path: /Library/StartupItems/ChmodBPF
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
Disk Information:
          Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Internal Memory Card Reader
          Western Digital My Passport 071A 1 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.kodak.aio.kcpconnector.plist
          [loaded] com.leapfrog.connect.shell.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.sonos.smbbump.plist
Launch Agents:
          [loaded] com.kodak.BonjourAgent.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.kodak.KODAK AiO Firmware Updater.plist
          [loaded] com.kodak.KODAK AiO Software Updater.plist
          [loaded] com.kodak.StatisticCollection.plist
          [loaded] com.spotify.webhelper.plist
          [loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
          Monitor
          ScanSnap Manager
          Evernote
          Dropbox
          AdobeResourceSynchronizer
3rd Party Preference Panes:
          Flash Player
          Growl
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 2.3.8.1
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 10.1.8
          AdobePDFViewer: Version: 10.1.8
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          Silverlight: Version: 4.0.51204.0
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
          Google Earth Web Plug-in: Version: 7.1
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
Bad Fonts:
          None
Old applications:
          AiOFirmwareUpdater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
          Install Spotify:          Version: 1.0 - SDK 10.5
                    /Users/jimschindler/Downloads/Install Spotify.app
          KODAK AiO Home Center:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
          KODAK AiO Scan:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
          KODAK AiO Software Updater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
          KODAK AiO Uninstall:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Outlook.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          My Day:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Registration:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/Registration.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          Spotify:          Version: 0.8.4.124.ga3559d86 - SDK 10.5
                    /Applications/Spotify.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
          Destinations:
                    Backup [Local] (Last used)
                    Total size: 931.17 GB
                    Total number of backups: 85
                    Oldest backup: 2013-02-13 18:40:47 +0000
                    Last backup: 2013-12-31 17:59:26 +0000
                    Size of backup disk: Adequate
                              Backup size 931.17 GB > (Disk used 277.92 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              29%          Mail
               3%          WindowServer
               2%          mtmd
               1%          EtreCheck
               0%          NETGEARGenieDaemon
Top Processes by Memory:
          410 MB          mds_stores
          238 MB          Evernote
          229 MB          Mail
          147 MB          iBank
          123 MB          WindowServer
Virtual Memory Statistics:
          3.36 GB          Free RAM
          2.92 GB          Active RAM
          621 MB          Inactive RAM
          1.11 GB          Wired RAM
          1.67 GB          Page-ins
          0 B          Page-outs

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

Not running MRP but has Purch Req with Sales Order as pegged reqmnt in AFS

Hello Gurus!
MRP run is activated in the Plant but we do not run MRP (no MRP batch job nor manual MRP). However, there are materials that have Purch Reqs with creation indicator as MRP showing pegged reqmnt from Sales Order even if Item category is the same.
My initial check shows that those materials with issue has MRP Indicator as BLANK(Multi-level, transaction dependent MRP) and those that do not generate Purch Req from SOs has N(No transaction-dependent MRP). However, transaction dependent MRP is not activated.
Can you provide areas where I should check/other probable cause of this?
Your valuable insights is deeply appreciated. Thanks!

Hello?
I just want to update how this was resolved.
I found out that MRP Indicator field in AFS MRP view for the materials with MRP generated Purch Reqs is maintained as BLANK(Multi-level, transaction dependent MRP) in AFS MRP view instead of N(No transaction-dependent MRP) but there is no transaction group maintained. So MRP run is triggered whenevert there is MRP relevant transactions performed.

Dump while running MRP: MD03:   PERFORM_CONFLICT_TAB_TYPE CX_SY_DYN_CALL_IL

Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors         PERFORM_CONFLICT_TAB_TYPE
Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE
       Occurred on     28.02.2008 at   12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
      The following hierarchy shows the compatibility rules:
ANY_TABLE
                    INDEX_TABLE   HASHED_TABLE
            STANDARD_TABLE    SORTED_TABLE
A concrete access type is only compatible with types higher
      in the hierarchy. For example, STANDARD_TABLE is compatible
      with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
      NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors         PERFORM_CONFLICT_TAB_TYPE
Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE
       Occurred on     28.02.2008 at   12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
      The following hierarchy shows the compatibility rules:
ANY_TABLE
                    INDEX_TABLE   HASHED_TABLE
            STANDARD_TABLE    SORTED_TABLE
A concrete access type is only compatible with types higher
      in the hierarchy. For example, STANDARD_TABLE is compatible
      with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
      NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

The problem about running MRP by MDBT

Hello everydody,
I encountered a strange problem in SAP system when I runned MRP by using MDBT.
Usually running MRP has two ways.First running MRP by using T-code MD02 ; second running MRP by using T-code MDBT in the background.In my SAP system,I used T-code MDBT to run MRP, and the MPR parameter is below:
Scope of planning
Plant                             2000
Processing key             NETCH
Create purchase req.      1
Schedule lines                 3
Create MRP list                1
Planning mode                 3
Scheduling                      1
Planning date             2010.06.30
Normally if I choosed the Planning mode 3 Delete and recreate planning data,then after running MRP ,the Plan orders' number and purchase requestions number should be changed and produced new numbers.
But I used T-code MDBT to run MRP, the Plan orders' number wasn't changed,the purchase requestions' number was changed. If I used T-code MD02 to run MRP, the parameter is the same as above.After running MRP,the plan orders' number and the purchase reequestions' number were changed.
I don't know how caused this happening.
Is there anybody who can help reslove this problem?
Thanks & Best regards!

Hi,Nikolai
I was spending vacation, i can't get that now, and i will send it to you as soon as possible,i think maybe that error occured beacause I updated the metadata from V 9.0.2 and imported it into the new version of Builder?

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

Result of running MRP

Similar Messages

Maybe you are looking for