Result recording to be done after UD with long term inspection

Dear All
I have activated two MIC's for long term inspection. Inspection lot is created and UD is provided after Result recording. i have run QA12 and go to EDIT/RESET/INSPECTION COMPLETION.  status of UD changed to LTIN and then in Qe51 / qe51n i selected long term inspection but error message is coming '' NO CHARACTERISTICS WERE FOUND". Plz help , how to do result recording after UD.

Dear Even if the char is long terms & if you have forcefully completed the chars then even if char has LTIN status it will not allow you.
But check this in your sandbox and revert.
1. In the MIC set the 'Optional Characteristic' and 'Long tem inspection ' in the control indiactors.
2. Attach MIC in inspection Plan
3. Do results recording and comlpete UD. all short term charactericts are closed.
4. QA12Change UD with history for Inspection Lot ,
Menu-> Reset inspection completion -> Status changes to LTIN
5. Goto QA02 --> you woudl see " do you wnat to compete Long term inspections" --> yes
6. Then Long term inspection characterictic is open for results recording.
7. Change and complete results --> Make UD
Check and Revert.
Cheers
KK

Similar Messages

  • Transfer of results From M.I.C to Batch in case of Long Term Inspection

    Hi Gurus,
    We have maintained long term inspection in the control indicators in the inspection plan and also assigned Class Characteristics to M.I.C.
    We are following these procedure for Result recording.
    1) we are doing U.D and then posting to unrestriced stock
    2) We are doing result recording.
    In our case the result from M.I.C are not transferred to Batch
    and the Status is Long Term Inspection,Short inspection completed and transfer posting completed.We are not getting Status Long Term Inspection completedand the results are not transferred to batch.What might the reason for this.
    Regards
    Amit

    You must redo the UD to have the results transfer.  (Providing of course your setup is correct and the transfer happens for regular characteristics at the first UD)
    I would recommend that you create two UD codes.  The first one might be ALTP - Accepted, Long-term Pending.
    After the LT characteristic is recorded, use QA12 to change the UD to ACC - Accept.  When you save, the resutls should be transferred.
    Craig

  • QM, Inspection Lot with Long-Term and Required Characteristic

    I want to know if it is possible to print a Certificate of Analysis (COA) with a required, long-term characteristic, if the inspection lot is using the special function "Short-Term Inspection Completed". And then a special Usage decision is made.
    Our dilemma is that we have materials that must be shipped for pre approval with a COA, before certain QM tests have been made, and we want to be able to print the COA, but the required flag stops us.
    So, what we really want is to require the characteristic if it is one usage decision and not require it if it is a special usage decision related to a "Short-Term Inspection Completed" inspection lot.
    We also, would prefer not to have multiple COA profiles to handle, this would cause too much extra data handling.
    Thanks,

    Hi,
    I If your Characteristic , whether it is short term or long term, is not marked as REQUIRED characteristic then there will be sure botheration for you to perform UD w\o performing the RR for them. It will prompt a message, which tends to be warning normally. But the characteristic is not REQUIRED and is OPTIONAL one then there will be no message , no botheration.
    But one thing is very clear that if you want to print the Result of some MIC or characteristic,
    then
    1. it must be recorded for the result.
    2. it must be maintained in the COA profile.
    At the other hand if you don't wish to print the result of some characteristic, whether it is short term or long term, don't keep it in the COA profile. System will not print it for you.
    Regards,
    Shyamal

  • Snapshot rollup with Long term backup to Tape

    I need to reconfigure the short term disk storage, and wanted to know if I create a Long Term backup to tape, does that
    store or encompass all the "snapshot/short term" backups that I have on disk?
    If so, I will be able to remove all my disk backups, reconfigure it as needed, and re-enable the short term backups without losing any of my historical backups. (For Legal reasons)
    Thanks!
    CCIE, CISSP, MCSE: Communication (Lync 2013), MCITP: Lync 2010, Enterprise Admin & Messaging ************************************************************************************************************************ Please remember to click “Mark as Answer”
    on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

    Hi,
    No, Long term to tape are also "point in time" backups and if started now will only contain new recovery points. The ability to make backups of previous recovery points is not very easy, you basically need to restore a disk based RP to tape, unfortunately,
    every restored recovery point to tape requires a separate tape.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Help with long term lines down

    no landline or Broadband since the beginning of December major fault with a number of lines Promised repair before but didn't happen, now promised for 22 December no help from BT there should be an automatic ability to credit mobiles when a problem is long term as it is occurring.

    BT will give you a free divert of your landline number to your mobile until the fault is fixed.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Need help with long term Java problems

    I've been having problems with Java on my computer for about a year now, and I'm hoping that someone here can help me out.
    Java used to work fine on the computer when I first got it (a Dell laptop) and I hadn't installed anything myself. But then one day it stopped loading Java applets, and hasn't worked since. By this, I mean that I get the little colorful symbol in a box when I try to play Yahoo games, use the http://www.jigzone.com site, go to chat rooms, etc. Java menus on websites like http://www.hartattack.tv used to work still, but lately they've been giving me that symbol too.
    I've tried downloading a newer version of Java, but nothing I do seems to work, and I don't know of anything I did to trigger it not working. I'm hoping there's a simple solution to this, and I'm just dumb.
    Thanks.

    This might be way off, but it's something that's tripped me up in the past:
    If you are using Sun's Java plugin, the first time you go to a site that has a particular Java applet, you may be asked to approve/reject a security request.
    If you have clicked on any other windows while the request is first being loaded (which can take some time, because this is swing based), then the security dialog box does not pop to the top of the window stack, and doesn't add an entry into the task bar.
    It appears that Java just doesn't work, but it's actually waiting for you to click "Yes". You can check this by hitting alt-tab and seeing if the Java coffee cup icon is one of the options.
    - K

  • RESULTS RECORDING WITH FREE TEXT IN QUALITY MANAGEMENT

    Hi,
    How can I give free text of 300 chars In results recording? For a process order with batch number & recipe, (in which master inspection characteristics are mentioned which are linked to general characteristics.)
    I created characteristics (type CHAR)(which can be used as free text in results recording ) I have created class, assigned chars to class & finally to material. Also assigned MIC to this class chars.
    When I do results recording I need to have these characteristics to be display as free text of 30character width. But since I have to give selected set for this general chars.(which is the system requirement) I have given  selected set while creation of characteristics.
    Due to this I can only select the codes from the selected set. Is there any process in which I can write free text up to 30 cars during results recording in quality module? & those characteristics I want to assign to MIC so that when process order is executed the first operation of quality can be done for RR.
    With Regards,
    Kareena

    Hi Kareena,
    All of first let me make it clear, if you will assign a Class Characteristic to the MIC, then it will become either Qualitative or QNT.
    Now toeards your questions solution.
    Option:-1
    As suggested by Venkatr, make the control indicator "Docu. Req" in the MIC control indicator set, page:-2. for the line item of MIC in the insepction plan.
    So, the system will prompt you a message to insert a text as described by Venkat, where you can enter the Long text also (Check the button available in the lower part of that small window)
    Option:-2
    Create a document type for this purpose, and assign a file, having 300 char. to the MIC, with the help of the "Object Link" function of SAP, avaialble with RR screen also.
    Reagrds,
    Shyamal

  • Changing result Recorded after UD and Insp Stock posted.

    Hi,
    Is it possible to revoke or change the result recorded after UD is given and also stock posted for material.
    In inspection plan i have activated the  long term inspection check box for that particular MIC for which i want to change the results.
    I have done UD reversal, stock reversal etc.
    Then
    I hv tried through QE02 but its showing:
    Short term Inspection Completed.
    All Insp.Completed.
    UD has been Made.
    pls suggest the possible solution on this.
    Rgds,
    Yogesh

    Dear sujit,
    We have Ztcode developed for Stock posting reversal not for UD reversal.
    Just want to know inspite of checking box for Long term planning in MIC also in Inspection plan.
    Is there any provision for reentering results for already closed MICs.
    User has made wong input entry while recording results.
    Rgds,
    Yogesh

  • Timing of usage decision and results recording

    Hi Gurus,
    The business have different testings that require some time to get the results. They need to sell the products even before the results are out. So they need to UD the ilot even if the tests are not yet done. How can we record the results if the ilot is already done with UD and the product is already sold?
    Thanks for  the help.
    Eva

    Its not recommanded to do the Result recording after material is sold but still you can try to use the concept of "Long term Inspection "
    While creating a MIC ,check a control indicator ,tick on  "Long term Inspection "
    This will allow you to do result recording after UD
    In a long-term inspection:
    There can already be a usage decision for the inspected material during the long-term inspection
    You can still record inspection results for long-term characteristics, once you have made the usage decision
    The system sets a separate status in the inspection lot to identify the long-term inspection and it provides special worklists and workflow tasks for this purpose

  • Preventing UD without results recording

    HI,
    We are able to do force closing of the inspection lots without results recording by registering the UD directly. How to prevent this? i.e. we dont want to register UD for lots without result recording for all the characterisitics. With User status we cannot achieve this because if we register results for some characteristics also the system status will be updated.
    Regards,
    Ravi Kumar C.

    hi
    yes as Mr.Shyamal mentioned, you can get through User status and in MIC slect the Required Characteristic radio button on control indicators,
    If you set this indicator, the inspection characteristic must be inspected.
    This means that you can only make a usage decision for the inspection lot after you have confirmed inspection results for this inspection characteristic.
    -pl check
    -ashok

  • Reg valuationof an M.I.C in result recording

    Dear all,
    we are working for an engg inductry, when we do result recording and if it is out of spec some rework is done can we  do resul recording for that in same insp lot  i.e  we want an M.I.C which should not valuate the result
    If we want M.I.C wherein we can carryout multiple result recordings for same lot if it fails again we can submit
    Please advice the procedure
    Thanks in advance
    venkat

    Following can be done provided that you are not taking UD of the inspection lot containing the MIC's  :--
    You can use the Inspection points for the Inspection lot Say In the Task list header you enter "Free Defined Inspection points"
    Also Enter the sampling procedure against each MIC in the char level.Make sure that you have created the sampling procedure with inspection points.
    This setting will allow you to do multiple result recording for the same set of MIC's
    But If you are doing usage decision of the lot then you may explore the concept of "Long Term Inspection" in control in dicator of the Char.

  • Multiple result recording against single MIC

    Dear Experts,
    In Case of calibration, for example i have assigned as one MIC to Operation, now after generation of Inspection Lot can we record multiple reading against single MIC. Please guide
    thanks
    DM

    Hi,
    I presume that apart from inspectopn point u have done all necessary steps .
    Is lnspection lot generating .
    1)If it is get generated then while result recording it will ask for identification.
    2)Enter any indentification (for ex a, b, c etc ) and save the result. Don't take UD as u want to take multiple result recording for that MIC
    3)Again go to result recording tab
       Follw step 2  & 3 as long as u want to thak no of results.
    IF not clear clear tell me ur requirement in detail & what u steps u have applied.
    Amol

  • Results recording could not be carried out

    Hi all ,
    You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported .
    where can i find the setting in the material master so that i can make result recording .
    thanks
    ksr

    Hi
    Go to mm02>Qm view->sleect inspection type--->click on check char & Inpsect with task list
    then result recording from next lot will be possible
    Regards
    Sujit

  • Usage decision vs result recording.

    Hi All Guru,
    I am new in QM , was MM & PP support. I am confused here about the usage decision vs result recording.
    I do understand in QM there's inspection lot , in order to release the inspection lot , i should released the UD.
    So what's the different between this both ?
    Can i have inspection lot without result recording ?
    Or can i have inspection lot without UD ?
    Please help to clarify my confuse.
    Thank you

    Hi Crag ,
    Thanks for understand because i am totally new in QM.
    I won't use QM for Notification here. I will use QM for stock transfer & QM in Delivery before PGI.
    As i know the basic requirement of QM 
    Setup the Master Data (QM View & all QM relavant data) ---> Type of inspection (which will determine which type of inspection to carry out ) -----> Inspection Lot Configuration --->Configuration for UD ----> Configuration for COA.
    Master data that which required
    Material master QM view,
    Master inspection characteristics,
    Task lists or inspection plans
    Code, Code groups and Selected sets.
    Quality info-record
    My Question :
    By having the above setup and configuration , without result recording can i have the COA to print out for either Post Process Inspection (Final FG) or Inspection at Delivery ?
    With the Master Data which i mention as above , is it sufficient for me to activate
    Post Process Inspection (Final FG - QM PP)
    QM Inspection at Delivery (QM /SD)
    QM stock transfer with inspection type 08.
    Hope to hear from you.
    Thank you

  • Result Recording of Inspection Characterstics.

    Hi Gurus,
    Actually we have one scenario in QA in which for one material there are certain specification whose result we will come to know few days later after posting inspection lot in Unrestricted & also after doing UD.
    I want to know how to do result recording for that perticular specification after we already did the UD for that lot?
    Is it possible after UD?
    Is there any additional customization setting nedded?
    Thanks in advance.

    Hi,
    You can do this .
    Those MIC for which you want to take result after UD .In control indicator of MIC put long term inspection check box on .
    So that even after UD of inspection lot ,  result record for that MIC will remain open for you to take result.
    Regards
    SANIL
    Edited by: Sanil Vadke on Jun 29, 2010 8:53 AM

Maybe you are looking for