Result row not appearing for leftmost characteristics

Hello Experts,
I am facing one issue I have two characteristics in rows A with display attributes b,c,d and F with diplay attributes e,f,g and key figures in columns, I am not able to see result row for Characteristc A but I can see result row for F but when I  change sequence in rows i.e characteristic F then charactrristic A I get result row for A.
Why this is happening please throw some light with available documentation.
Thanks & Regards
Deepak Chavan

Hi Deepak,
You have 2 chars A & F in Rows and lets say a KF Q1 in columns. Now when you go to properties of the Chars A & F and select 'Display Always' for the Result .
As per property of query designer, when you see the result, the 'RESULT' row appears on the 2nd column (F) and 'OVERALL RESULT' is displayed for the 1st Column(F). This is logical because you cannot have the result rows appearing the 1st column!
Let us put an e.g. here... If field A is say CALMONTH with values 01.2010, 02.2010 etc and field F is 'Order Change Date' and KF is 'No of Orders changed'.
In such a scenario, when you have the Output of the query, the result set will have all the 'Change Dates' month wise grouped and the result column showing for each month under 'Order Change Date'.
This conveys the 'No. of Orders Changed' month wise!
-Hope it helps
VA
Edited by: Vishwa  Anand on Sep 28, 2010 6:55 PM

Similar Messages

  • "Result" row not appearing for the Structure record in Bex Designer.

    Hi
    In BI BEx Designer,
    under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
    But i am not finding this thing for the structure.
    Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
    Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
    Thanks...

    I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
    for the other query, yes i do KF in the report.
    thanks

  • How to disable result rows in Web for all characteristics?

    Hi @ all,
    i want to disable the results of all Characteristics in the Web Application.
    In the Query Designer I defined that the results should ever show. Later, in the Web Application, I want to disable the results for all characteristics in one step
    Ist there a possibility to do that?
    Thanx for your answers.
    Heiko

    yes - you can create a button./link that runs a URL command.
    The command would use the SET_SUPPRESSION command in bw3.5
    The command would be SET_RESULT_VISIBILITY in bw7.0.
    for bw 3.5 - http://help.sap.com/saphelp_nw04/helpdata/en/86/27813b731fd60ee10000000a114084/frameset.htm
    for bw 7.0 - http://help.sap.com/saphelp_nw70/helpdata/EN/43/d828d988ef05f6e10000000a11466f/frameset.htm

  • CRT results are not appearing after successful payroll run

    CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
    Please suggest ideas to find the results of CRT.

    Hi Rémi Corriveau,
    Thank you for spending your time to answer my question.
    Here are the answers to your questions . . . .
    QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
    ANSWER: We did a LIVE payroll run for a period of 3 months.
    QUESTION: Did you use t-code pc_payresults ?
    ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
    QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
    ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
    our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
    However, we did check the Processing Class 30, but did not check the processing class 70.
    Shall update you once PC 70 is also checked.
    Please educate, if there are any particular specifications that need to be entered while checking
    for our WTs in PC 30 & PC 70.

  • AED not appearing for utilization

    Hi all
    I am reposting the question having hopes of getting replies..
    A similar question asked in this forum has also been included.
    This particular case is for import trading scenario
    Purchase Order is made in MM and during MIGO excise invoice is captured.Addnl CVD value 4% will be taken as AED.The same can be displayed in transaction J1IG.
    Client has the requirement of displaying AED in J1IJ while capturing the excise invoice created during MIGO itself i.e, during goods inward as the same will be considered for RG23D reporting purposes.
    But AED (Addl CVD 4%) is not being displayed in J1IJ for depo sales.
    Also there is no field called as AED for capturing the same in J1IJ,but there are additional fields TAX1 and TAX2 in J1IJ.
    BED,ECS,SEcess is transferred from J1IG to J1IJ but not AED
    Awaiting all your useful feedbacks to display AED in J1IJ
    similar question posted in the forum on Jul 8..
    AED not appearing for utilization-Urgent  
    Posted: Jul 8, 2008 4:01 PM           
    Click to report abuse...      E-mail this message      E-mail this message             Click to reply to this thread      Reply
    Hi All,
    I am having input credit available for AED whereas the payable amount is not there for AED. So I want to utilise this AED amount against other payable amounts but this AED credit balance is not showing for utilization. When I have checked for other plant where AED payable is available then the AED input credit is also showing for utilization.
    I have checked the CIN settings: In excise registration details for the plant, the Liable to AED option is ticked and under Account determination settings--- RG23 AED account has been assigned to UTLZ ETT.
    Can anybody please suggest that what other settings needs to be done or is there any specific settings for cross utilization which I might have missed out on.
    Thanks & Regards,
    Antima
    any inputs guys...........
    Rgds
    Shashidhar

    Hi,
    If i am correct you are referring to ADC (Additional Customs duty) in case of imports. This duty value is similar to AED (In screens it will be in AED column only) but in customization you will be using subtransaction type "IP" to differentiate AED from ADC, you need to maintain G/L accounts for Excise transaction types and subtransaction type IP, so that the duty values are passed on to those G/L accounts.
    Cheers,
    Santosh

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • The option to extract pages from a PDF document as described does not appear for me.

    Im currently running Acrobat Pro XL and the option to extract pages from a PDF document as described in the below tutorial does not appear for me.  Please help!
    Extracting pages from a PDF
    https://acrobatusers.com/tutorials/extracting-pages

    Typically if the extract feature is not present then the application is not Acrobat Pro.
    Be well...

  • In the packing list, batch number and expiry date is not appearing for a ma

    Dear Friends,
    I have an issue in the packinglist.
    In the packing list, batch number and expiry date is not appearing for a material.
    But in the delivery the batch number and expiry date is appearing.
    Why this has triggered and how to solve this?
    With regards

    Hi Vamsi,
              Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
    Regard's
    Murali.

  • Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
    and my version of Photoshop is CC.
    I ran into  the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount  from the Blur Tools slider. thank you.

  • To buy an app, I updated my forgotten security questions. Successfully changed, I went to purchase the app again, except the questions would not appear for me to answer.

    talked to a person on the phone already, and went into the apple store today. also brought my macbook pro with me, to have them help. it went successfully changing them. The problem is they will not appear for me to answer when proving my identity on the app store!!!!

    Security Questions
    https://discussions.apple.com/thread/5232504?tstart=0

  • Results are not appearing in report

    Hi All,
    When user ran the report, it gives below error.
    A general error has occured[nQSError:1207]Unexpected socket read timeout: connection terminated by network, e.g. by the firewall.
    But when ran the query in the backend it fetching the results and in criteria it contains SET OPERATOR with UNION,but not appearing the results in report.
    Regards,
    Niranjan

    Hi, Thanks for your response...
    When i ran the report with diffrent/default combination then i am getting the results.
    In my criteria SET operator is used for combining of similar request and we have diffrent filter conditions and dashboard prompts also.
    Connection from back end is fine,because iam able to get other report results also.
    Regards,
    Akkapeddi

  • BAPI_INSPOPER_RECORDRESULTS:result does not appear in inspection lot...

    Hi,
    I am using BAPI_INSPOPER_RECORDRESULTS to record inspection lot result at characteristic level.
    When I use this BAPI, it does not give me an error.
    But the values against each characteristic does not appear  in the result field of that characteristic.These are not getting updated. system status shows INSP RREC.
    I am passing the result value as  "mean-value" field in bapi charresult table..
    what is the solution for this?
    I am trying BDC for the same purpose in tcode QE51N. but in between there is error msg promp..so BDC is not working after that promp as it is asking for user entry for the mandetory field "Engineer's name"..
    Kindly provide the solution..

    Hi,
    maybe QE11 is an option for recording results vai BIM.
    Cheers,
    S>

  • Result row not getting in Query

    Hi All,
    I have standard infoobject "Characteristic" 0WAGETYPE in my Query. The Problem is, I am not getting the result row for the wage type. I checked the properties of
    0WAGETYPE in my Query and kept results rows - always display. Still It is not getting. Any idea?
    For your information, output of 0WAGETYPE has "/u201D. EX: /000, /210, /100. Is there any problem with this?
    Thanks,
    KN

    Hi,
    Are there other char before this char in the repot.
    Try to put only this char in the rows of the report and then see the result.
    I dont think values like this can create any issue.
    You can always raise an OSS message to SAp if this is the case.
    Thanks
    Ajeet

  • Result Row not Yellow

    Hi, When I run my Workbook Query (Backorder Qty by Material Division) for Sales Org 1100  the result it 8 rows of Material Divisions and a bottom yellow result row.  This is good.  When I add an additional Sales Org 1200 I end up with 9 rows of  Material Divisions and the Result Row is not Yellow.  The Row above the Total Line is Yellow (The Row that was originally the Result Total is yellow)
    Any idea what might cause this behavior.  Can't find anything online that might be the cause.
    Thanks

    Click the icon Pause Automatic Refresh.   Sometimes, there is delay in the formats with refresh with variable value changes.

  • Subtype Mathod not appearing for BO in workflow task

    Experts
    I have created a subtype ZBUS100106 for BO BUS1001006. Also I have created a new method for custom BO. When I am assigning the BO BUS1001006 in workflow task, the new method whcih i have created is not appearing. What do I need to do to get the method in workflow task.
    Sathish

    Well if you don't say so in your post, I just assume you didn't mostly because of your problem.
    In the forum guidelines it is explained how to formulate your questions in order to get the best results. For instance describe what you did up to the point you got stuck, the release your on could be of importance and what you already tried to resolve the problem.
    Regards,
    Martin

Maybe you are looking for