"Result" row not appearing for the Structure record in Bex Designer.

Hi
In BI BEx Designer,
under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
But i am not finding this thing for the structure.
Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
Thanks...

I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
for the other query, yes i do KF in the report.
thanks

Similar Messages

Result row not appearing for leftmost characteristics

Hello Experts,
I am facing one issue I have two characteristics in rows A with display attributes b,c,d and F with diplay attributes e,f,g and key figures in columns, I am not able to see result row for Characteristc A but I can see result row for F but when I change sequence in rows i.e characteristic F then charactrristic A I get result row for A.
Why this is happening please throw some light with available documentation.
Thanks & Regards
Deepak Chavan

Hi Deepak,
You have 2 chars A & F in Rows and lets say a KF Q1 in columns. Now when you go to properties of the Chars A & F and select 'Display Always' for the Result .
As per property of query designer, when you see the result, the 'RESULT' row appears on the 2nd column (F) and 'OVERALL RESULT' is displayed for the 1st Column(F). This is logical because you cannot have the result rows appearing the 1st column!
Let us put an e.g. here... If field A is say CALMONTH with values 01.2010, 02.2010 etc and field F is 'Order Change Date' and KF is 'No of Orders changed'.
In such a scenario, when you have the Output of the query, the result set will have all the 'Change Dates' month wise grouped and the result column showing for each month under 'Order Change Date'.
This conveys the 'No. of Orders Changed' month wise!
-Hope it helps
VA
Edited by: Vishwa Anand on Sep 28, 2010 6:55 PM

Data Entry Layouts - Rows not ready for inputs - Multiple records

Hi,
I have created a simple layout using a predefined simple structure for rows (FS Items) and a data driven one for columns (for the period value in LC).
Some cells show some data in them and are not available for input because there are multiple transaction records behind the numbers.
The transaction records share the same breakdowns except for the Currency Translation Indicator (it is empty for original records and shows '1' for records created during currency translation) and the currency key for transaction currency (sometimes it is empty).
It would be much appreciated if you let me know a way to introduce new data with layouts for FS Items (accounts) which already have transaction records.

Hi Roberto,
Data may not be ready for input because of different reasons. The most I met were - you didn't expand the rows structure until the leaves (not nodes) or you marked the column as display only.

Verifying the Workflow Configuration - does not appear for the workflow services.

hi!
the services for the workflow services is not in windows service, I´ve installed workflow manager and correctly configured, service bus correctly configured etc
verify

Which self Service function you are using to change the assignment ?
Their are two API to update asg values. Try to apply user hook on both of them and retry ur scenario.

The firmware was upgraded on my ipod touch 4g and now the artwork does not appear for the various albums. What to do about this?

After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?

Try looking at the previous discussions with your same problem. Like the ones on the right-hand side of this page under the heading "More Like This".

Sender JDBC adapter -- Update SQL statement NOT work for the last record

I'm trying to use SAP XI to send records from Oracle database to As/400 using JDBC adapter. I've defined the communication channel for sender
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE NOT CU_ACTION_CD='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE NOT CU_ACTION_CD='P'
Supposed that 3 records were retrieved from (1) and successfully updated to AS/400 but only the first 2 records in Oracle database are updated according to (2)
Any advise.
Pansy

Hi Pansy,
You select and update query is looking like wrong
kindly check below query,If you are using oracle
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE CU_ACTION_CD !='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE CU_ACTION_CD !='P'
Thank you
Sateesh

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Suggestion for not picking up the same record

Hi All,
I have a plsql procedure that picks up the records from the same table from multiple threads. Different threads should not pick up the same record.
Current Logic:
I am locking the row that has been picked up the current thread and the next thread should pick up the next row but unfortunately i have a problem here, The inner query will pick up the same record until the status of that particular row is changed since I am picking them up in a FIFO order.
I am not able to add the lock row in the inner query since oracle does not support it. Is there any other way to do it simpler?
XXRM_ARM_HEADER
header_id
service_id
XXRM_ARM_LINES
line_id
header_id
status
Query
SELECT dl.header_id, dl.line_id
FROM xxrm_arm_header dh, xxrm_arm_lines dl
WHERE dh.header_id = dl.header_id
AND dh.service_id = 4
AND dl.status = 'REQUEST_RECEIVED'
AND dl.line_id = (SELECT LINE_ID
FROM ( SELECT dl.line_id
FROM xxrm_arm_lines dl,
xxrm_arm_header dh
WHERE dh.header_id = dl.header_id
AND dl.status = 'REQUEST_RECEIVED'
AND dh.service_id = 4
ORDER BY dl.line_id ASC)
WHERE ROWNUM = 1)
FOR UPDATE OF dl.status NOWAIT SKIP LOCKED

Robert Angel wrote:
forgive me if I am naive, but why wouldn't each thread updating its selected rows with a nowait and if exception pick the next range mechanism work?It is not that simple. You can get race conditions between threads as they process the same rows in the same order attempting to "beat" one another by being the first to lock it. The more threads there are, the potentially worse this situation.
There's also the issue of performance. The thread concept (aka parallel processing) in this respect has a single primary aim. Increase performance and scalability. But does it?
How is I/O reduced when 50% or more of the reads done by the thread (to find a row to process) is wasted I/O as rows being read have already been locked by other processes/threads?
The fact remains that if you give the same set of rows to a bunch of threads (e.g. DBMS_JOB processes) for processing, they will contend for the same rows. There will be overheads. There will be wasted I/O.
So what I am suggesting is each thread; -
1. Look for rows unprocessed, I usually use atribute field in e-Business suite for this purpose
2. Attempt to update them with nowait, to INPROCESS
3. If 2 fails, try the next range - repeat until 2 is possible or end of rangeAnd step 3 is the one that will waste I/O and waste time - as the time it spend looking for a row to process could have been spend on actually processing a row.
4. You could also improve this by specialising each thread to have its own preferences, if there exists a mechanism that would mean fair distribution between the threads..Yes, and this is a key factor to removing contention between threads, reducing their I/O overheads and reducing their time being spend on finding unprocessed rows to lock and process.
Then there's Oracle technical issues. On 11gr2 for example, despite using skip locked or nowait (that cannot be used together in a single clause like in 10g), I'm seeing deadlocks when threads contend for the same rows. Same code works fine in 10g without deadlocks. So the approach one chooses need careful testing on that specific Oracle version to ensure it behaves as expected and meets the performance requirements.
Bottom line is that parallel processing is not as straight forward as simply slapping a nowait clause onto a select statement in order to skip locked rows.

I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
Thanks
Pheona

Greetings Pheona,
That appears to be a hard drive based camecorder. Usually these mount on the desktop of your computer as a little white hard drive icon. If you go inside you should be able to find the movie files the camera is saving. See what format they are (the last 3 letters at the end of the file name is a good place to start).
You can drag the movie files from the camera hard drive to the computer to copy them. Then convert them with a video file conversion program to a format iMovie can understand.
Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4". Then import the resulting file into iMovie and see if that works any better.
If that program can't convert the files you can try another file conversion program:
http://www.southpolesoftware.com/iVI/iVI.php
http://shedworx.com/voltaichd
http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
Hope that helps.

Urgent:SUS PO not appearing in the PO list for vendor's user

Hi experts,
I am working on SUS. SRM5.0 single box scenario. PO is created by the purchaser and is successfully transfered through XI. But this PO is not appearing in the PO list of vendor's user. Please let me know what can be the possible reason.
following roles are given to the user:-
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_BBP_STAL_BIDDER
SAP_EC_BBP_BIDDER
Also checked vendor data. Communication method is selected as XML.
After creating PO and transfering it - message comes-
Information Processing BBP_PO_SEND_XML Is Started
Information Action successfully completed
Please help. It is very urgent.
Thanks and Regards
Kapil

Hi Kapil,
do you have the same result when deleting all roles and only using role SAP_EC_SUS_ORDER_PROCESSOR?
Are vendors successfully replicated into SRM and a user created via Web
Txn "Manage Business Partners"?
Did you maintain table BBP_MARKETP_INFO?
Did you replicate the company code using Txn BBP_SUS_BP_ADM?
In any case there is also an inital replication of vendors
from MM to SUS via BD14 necessary.
Thanks,
Claudia

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01, FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

"Result" row not appearing for the Structure record in Bex Designer.

Similar Messages

Maybe you are looking for