Result (SUMCT) doesn't work

Hi,
I have created a query and some formulas in it.
one if this formulas is "Result of KeyFigure1". when I look in the result line for KeyFigure1 I see a different number from the one that is shown in the "Result of KeyFigure1" column.
Example
KF1 / Result KF1
1 / 9
2 / 9
3 / 9
The result Line for the KF1 column is 6 (of course).
I spected the query to show 6 in every row in the column "Result KF1", but it didn't.
does any one knows why???
thanks for the help.
Mauricio

HI,
I guess the KF1 is being calculated with some formula. If so then the result too is getting calculated with this formula. Now it might be showing the result as summation and that may be because you have selected display result as total in the properties of KF. This setting is just for display purpose and SUMCT takes the actual value.
I will sugeest you to try the following and see if it works:
in the KF1 go to the exception aggregation tab and set it to total with reference char as the last characteristic in your query.
Now try to use SUMCT and check.
Regds,
Shashank

Similar Messages

HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Displaying cursor contents in results grid doesn't work anymore???

Sql-Developer version 1.2.1 build MAIN-32.13
It used to work such that the results would show an elipse (...) button which would bring up a grid with the results of the cursor, but it doesn't work now.
select cursor(select sysdate from dual) from dual
returns
{<SYSDATE=19-SEP-07>,}
Perhaps I'm missing a plugin???

It looks like the cursor does not support dates. If you use to_char on your date it'll be fine. For example this works:
SELECT DEPTNO, DNAME, CURSOR (SELECT ENAME
FROM EMP
WHERE EMP.DEPTNO = DEPT.DEPTNO)
FROM DEPT
WHERE DEPTNO = 10
Bug logged.
Regards
Sue

Why Hotmail Doesn't Work Properly Anymore???

Hotmail recently upgraded their look and as a result, it doesn't work properly via my iphone when I use Safari. It tells me to upgrade my web browser to Safari, IE or Firefox, however my iphone has the newest upgrade available...........so what is the fix?
In short, my hotmail doesn't work properly (Doesn't display emails in the preview pane) so I can't check emails essentially.

See the post abut this that you posted in a few minutes ago. Allan has answered the question.
http://discussions.apple.com/thread.jspa?threadID=1786751&tstart=0

Quick time player doesnt start any more since kernel shock and update, the symbol looks different, reinstallation doesn´t work

hi there.
I am using a Macbook Pro with snow leopard and this is my problem:
I was having a Kernel Shock 2 weeks ago. After that, my Finder-Dashboard hasn´t work any more. I´ve did the latest update. Now Dashboard Works but Quick Time Player doesns´t do.
I Can´t find NOWHERE in the internet an installation file for Quick time player to reinstall. And I can´t find my Installation DVD.
quicktime has changed his symbol to an white picture with pensil and brush.
I have made a second Account and activeted the guest accounts and tryed there, but Quick time player isn´t here working to.
its really sad that this program doesn´t run any more.
It blinks 2 times in the dock and shut down immediately.
Can someone please help me? is my only opinion finding the Disc?

I've tested that on an iPad 1 and it seems problem is performance related. On this device a simple click to a google search result link doesn't work properly. You hit the target multiple times and sporadically it opens. You still see the focus on the object and it's activation but no event triggering happens.
All others functions are working well, only Webapps and Webpages suffer from this issue.
The owner of the device has not recognized that issue and believed it is a "feature" not a bug as he do not has much experience with Apple devices. But this confirms it is on every device and not my own personal one or dedicated to our office. The only workaround is to use other devices or touching links with different speed/pressure. It works better if you hit the objects very quick lifting the finger immediately.

OS 10.8 just installed. "Hot Corner" to put new iMac 2.7 GHz Intel Core i5 to sleep mode doesn't work. Have tried cordless and corded mouse with same result. Momentary sleep, immediate wake. Any idea how to fix?

Set "hot corner" to put iMac to sleep. Doesn't work. Selecting the corner will momentarily put to sleep, but immediately rewakes. Have tried all four corners with same result. Have tried with wireless mouse and with corded mouse with same result. Any ideas as to how to fix?

You've been so great, I want to thank you for all the help over a very frustrating day. Last evening, I redownloaded and installed the fresh copy of Mountain Lion. The problem remained. After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware degrading, so I set up a case with Apple support for today. Early in the diagnostics, I had swapped out for a corded mouse and the problem remained. As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
Thank you again, so much!
.../awards rkaufmann87 500 points!

RE: Firefox search box - manage search engines - get more search engines.. IT DOESN'T WORK , I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

RE: Firefox search box -> manage search engines -> get more search engines..
IT DOESN'T WORK
I just want to add youtube + some others to the list of sites in the Firefox search box, I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

Hi Kvoter,
What are you hoping for, firefox to display lists of sites you have visited or bookmarked ?
*''' it should be able to do that'''
* my firefox does that
I am only a fellow ordinary user of Firefox & XP, but maybe the problem is on your machine, rather than needing a fix from firefox. If you take a little time to read this you may be able to sort out the problems yourself.
I hope you do not mind me covering a few basics:
* the [[Search bar]] { <-- clickable link -- ] is designed to produce a lot or results, whereas
*the [[Location bar search|Location Bar]] is a lot more specific and may be [[Location bar autocomplete#w_controlling-behavior|set]] to include or exclude History & or [[bookmarks]]
If you are getting literally 1000s of totally unrelated results you may need to consider [[Is my Firefox problem a result of malware]]
Hope to hear that you have solved the problem, or a bit more detail about what still is a problem.
John

Copy XML data out of event.result to a XML var doesn't work

So I'm pretty new to Flex, but learning with the help of a few books. I'm totally stumped here though, as I"m copying an example right out of The Flex 3 Bible and its not working the way I thin it should. My code is below. Here is my problem. I'm reading in an XML from a php script. Works fine. In Debug I can tell the event.result is getting the XML as it should. In the resultHandler I'm trying to copy it to a variable I assigned called myCollection. This is just not occuring for some reason. If I look at the variable in debug, its null. following that i"m trying to take innertags and get them out (myCollection.trumpet.settings). Of course this doesn't work because myCollection is populated with nothing. This came right out of an example on page 654... I've been bangging my head against the wall for hours. any help on how to copy this data out of event.result would be great.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
   import mx.rpc.events.ResultEvent;
   import mx.collections.ArrayCollection;
   [Bindable]
   private var myCollection:XML;
   private var xReturn:Object;
   private function resultHandler(event:ResultEvent):void
    myCollection = event.result as XML;
       xReturn = myCollection.trumpet.setting;
   // textbox.text = myCollection;
]]>
</mx:Script>
    <mx:HTTPService id="myService" url="http://10.101.50.60/get_config.php"
        method="POST" showBusyCursor="true" result="resultHandler(event)"/>
    <mx:VBox left="25" top="25">
        <mx:Button label="Get Data" click="myService.send()"/>
<mx:Label id="textbox">
</mx:Label>

    </mx:VBox>
</mx:Application>

Try setting resultFormat="e4x" in the HTTPService.

Calculate Results As Average of Detailed Values That Are Not Zero... with hiearchies doesn't work

Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
Abraham

It is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Linked column with # sign doesn't work in report results

I have a 2 page query situation, whereas in the 1st page I have a wildcard query to find a product number.
This product number is set-up as link to run a report which opens in another page.
(Type is a STRING.)
Everything works fine unless the product number starts with the # sign.
I can run a report using this in a non-linked page, but it doesn't work in the linked page...?
Simple queries
Page 1
select
from
Products
WHERE (((upper(TOP_ITEM) like upper(:P1_SEARCH)||'%')))
and :P1_SEARCH is not null
(Link on Top Item - :P2_Search)
Page 2
select
from
Products
where Top_Item = :P2_Search
(This works fine if I enter the #[Product] into the text field)
Link doesn't work...?

You need to escape the "#" character in the product no and generate the link's HTML code in report #1 directly within the SQL query.
select ..
,'<a href="f?p=REPLACE(product_number,'#',''%23)
,'<a href="f?p=' || :APP_ID || ':200:' || :APP_SESSION || '::NO::P200_PRODUCT_NUMBER:' || REPLACE(product_number,'#','%23') || '"> Link</a>' product_number_link
FROM ..
{code}
<i> 200 is report #2's page
P200_PRODUCT_NUMBER is report #2's page item which is set on redirecting to that page.
Product_number is the column name of column with '#' characters
Change display type of product_number_link column to "standard report type"</i>

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

Trial and Evaluation for NW ABAP 7.02 SP6 64-bit Installation doesn't work

Hello Colleagues,
the installation of SAP Developer Version under Download SAP NetWeaver Main Releases\SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition doesn't work.
Different to the requirements I tried to installed on VM Player and with Windows Server 2003.
Only when ABAP Imort reached package 34 (successfully imported) the installation process stopped without any error.
Like frozen.
Please does anybody now the problem? Or is the Installation on Windows 2003 general not possible or at VM Player?
Many thanks in advance!
Regards,
Jochen

Hello, Jochen.
Or is the Installation on Windows 2003 general not possible or at VM Player?
It is possible.
Check VMware options, especially allocated operative memory size.
If there is not enough memory, VMware begins to use swap and productivity becomes very low. As a result, program freezes.
Best regards,
George Shlyahov.

My new iPhone 4 doesn't work at all

You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierra

So what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null

Search Bar doesn't work in normal itunes but works in safe mode

I am not sure if anyone else is having this problem but with Itunes 11.0.4 The Search bar doesn't work no matter what you type any result you get you click on it nothing happens. I recently went into Itunes Safe mode and the Search bar works fine. I really hope Itunes fixes this with the next update.
Is anyone else having this problem?

I've found a solution!
Uncheck the "search entire library" option in the search bar then check it again.

Quick Look doesn't work properly

I can get folders to show in Quick Look by highlighting them and pressing the space bar or eye icon but then...a new window with a large icon of the folder appears and the only controls at the bottom are to open in full screen or close the window.
Have looked in Preferences and trashed the Quick Look daemon file but no change.
I've not tried to use Quick Look before (been running Leopard for a couple of months now) and am trying it now as a result of reading an item about it in the Mac Tips column so I don't know if it's a new problem or if it has always been dysfunctional.
Any suggestions for solving this would be gratefully received as, on reading what it can do, it looks like a very useful tool.
Thanks
Gordon

Quick Look doesn't work that way, unfortunately, there is a third party solution available that produces the behaviour you want. The basic functionality of Quick Look is to enable fast access to files and not folders...

Result (SUMCT) doesn't work

Similar Messages

Maybe you are looking for