Results analysis data is calculated through sales order

Hi All,
I m trying to calculate WIP of one process Order through KKAX. But I am getting the below error
Results analysis data is calculated through sales order 300002423 001000
Message no. KJ112
Diagnosis
The order you selected for WIP calculation or results analysis is assigned to a sales order. A results analysis key was entered for this sales order.
System Response
The system determines results analysis data for orders assigned to sales order items through the results analysis for the sales order.
Procedure
Carry out results analyis on sales order 300002423 001000.
This process Order is related to Sales Order and I have checked the Result Analysis key is attached to Sales Order.
Please help me out in this issue.
Thanks!
Regards,
Vivek

Hi,
I was getting the above error because a RA key was selected ar Sales Order, Now what I have done is I have removed the RA Key from Sales Order, there is already a RA key attached to Process Order. Now When i am calculating KKAX (WIP) I am getting below message
The order is not a WIP element
Message no. KJ148
I have done this because my client is not using KKA3(RA fro Sales Order)
Please help!!!!!!!!!
Thanks!
Regards,
Vivek Srivastava

Similar Messages

  • Third Party Process (PR through Sales Order)

    Hi all,
    I have to configure the third party scenario (PR through Sales order) for one of my client.
    So can anybody tell me what are all pre-requisite / settings from the configuration point of view as well as from the transaction point of view.
    Thanks
    Shubham

    Hi,
    here is some stuff regarding third party purchasing,
    may be it will use ful,
    u2022     The item category group (BANS) in the sales:sales org.data screen of the material master controls whether or not the material will always be a third party material.  In this case, the item category in the sales order will be defaulted to u201CTAS.u201D   If the material is also procured internally, then the item category group can be set to u201CNORM,u201D and the material can still be used for third-party processing if desired.
    u2022     The item category in the sales order (TAS) informs the system that      procurement data must be maintained for the order.  In addition, this item  category results in a purchase requisition being automatically created with its item   category defaulted (S).
    u2022     The purchase requisition is created as a result of a sales order.  For each schedule line (quantities for sales orders broken up by dates of delivery), a purchase requisition item is created, provided that the item category on the
    sales order is u201CTASu201D for third-party.  The purchase requisitions created can
    be viewed and even edited from the schedule line screen (Edit-
    Procurement  Details).
    u2022     Changes in quantities, dates and account assignments in the purchase order result in the automatic changing of the sales order.
    u2022     A desired vendor (informational field) can be specified in the sales order in the procurement data for the order.  In addition, a fixed vendor may be assigned in this data if known at the time of the sales order. This then becomes the supplier for the third-party items. If the vendor is not specified in the sales order, the purchase requisition goes through the normal source determination.
    u2022     The account assignment in the purchase requisition can be either the sales order (C), or aux. account assignments (X). 
    u2022     Once created, the third-party purchase requisition follows normal
    purchasing procedures.
    u2022     Customer delivery information is copied onto the purchase requisition from the sales procurement data.
    u2022     If you create delivery schedules or change quantities during the purchasing process, these automatically get copied back to the schedule lines on the
    sales order.
    The goods receipt indicator can be found in the purchase requisition which can be edited from the sales order (Click on Item line- Hit Schedule Lines button -Hit Purchase Requisition Button).  This indicator determines whether or not the customeru2019s goods receipts are monitored.  When the indicator is off, invoice verification is done against the purchase order quantity, and the delivery of goods to the customer is not input into the system
    chenna
    Edited by: lakshmi reddy on Oct 6, 2010 2:23 PM

  • Service Order Creation through Sales Order...

    Hello,
    I got one requirement it is , we need to copy the account assignment (WBS element ) from sales order line item to service order line item . Morever same wbs element should be used to create automatic settlement rule in service order.
    This should also work even if user changes the WBS element later. i.e, updated WBS element should again update service order and settlement rule automatically.
    I tried to use Exit MV45AFZB and routine USEREXIT_MOVE_FIELD_TO_COBL, but still i am not able to see the data in service order Location tab, Object tab.
    I checked the table ILOA, its not getting updated when creating Service order via sales order.
    I am not able to see any fields value coming on Service order screen when creating through sales order.
    Regards,
    Sujeet Mishra

    Hi ARC,
    Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
    Runtime Error UNCAUGHT_EXCEPTION
    Except. CX_SOAP_CORE
    Date and Time 07.05.2008 20:13:24
    ShrtText
    An exception that could not be caught occurred.
    What happened?
    The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
    call hierarchy.
    Since exceptions represent error situations, and since the system could
    not react adequately to this error, the current program,
    'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
    be terminated

  • Custom fields in additional data B not displaying - Sales Order

    Hi gurus,
    I added some custom fields to the addtional data B tabstrip in sales order screen, but they didn't display. This is in the client's system. BUT in our own system it works perfectly. The screen has been activated.
    Maybe it's because of the version difference?
    Anyone experienced this before?
    Any suggestion will be great.
    Thanks

    Resolved by myself.
    For those who would have the same question, please refer to SAP note 386694.

  • Auto PO through Sales Order

    Hi,
        I am MM Consultant, we could able to generate an auto PR through Sales Order,,, my client wants to generate an auto PO through Sales Order without PR intervention. is it possible? if so how to do it,,
    want to know the settings to be done in SD for Auto PO generation w.r.t. Sales Order, plz guide me
    regards,
    urendra

    Hi,, 
        the following are the steps i followed:
    1. Created my own Sales doc type = ZCHK and assigned numbe range to it  
    2. Item Category TAS  has been selected, Item Category Group TAS1 has been created.
    3. for material type HAWA- assigned Item Category Group TAS1
    4. Created a material master  S1 with Gent item category - TAS
    5. Created a Purchase info record for material S1, Vendor 400055, Pur Org -EPD, net price = 100
    6. In Assign Item Categories
        Sales Doc type-Item  Cat Gr-Usage--Hl item cat--Def it cat- Manual It cat
            ZCHK----
      TAS1    -
    TAS -
    ZSTK
    7. Created SO using t_code VA01, SO 4000804 created, and I noticed that a Purchase Requisition was generated,,where as I require to generate a Purchase Order directly without intervention of Purchase Requisition.
        (Usage--- i have not selected & assigned any usage,,, will it make any difference),
        plz help me out,,, its urgent,
    regards,
    urendra

  • Data Validation for SD Sales order and Deliveries

    Hello All,
    We activated the data flow for SD sales Order and Deliveries for Infocubes 0sd_co4 and 0sd_c05 and there correspoding datasources.
    I have 2 queries
    1. How to validate data for BI SD sales order with ECC.
    2. How to validate data for BI SD Deliveries data with ECC.
    Kindly help, <removed by moderator>.
    Thanks,
    Rakesh.
    Edited by: Siegfried Szameitat on Jun 21, 2011 12:51 PM

    Hi Rakesh,
    You have to check the tables in R3 and then compare with the Datasources in BW.
    For Examples
    VBAK table in R3 for Sales Order on BW-2LIS_11_VAITM
    VBRK table in R3 for Billing iin BW-2LS_13*
    Check for that day how many sales order were there in VBAK table and there in BW.
    Rgds
    SVU123
    Edited by: svu123 on Jun 21, 2011 8:19 PM

  • Settlement rule for SO through sales order

    Hi,
    In my scenario,service order is being created through sales order.Earlier we used to have default settlement rule for the service order as Profiltability segment.Now we  have changed as SD1-Sales document in the settlement profile.
    Now If I create service order through sales order,in the service order settlement rule is not getting created and If I gone through IW32,its asking for With Default/Without Default.If I select with default,now its picking up the rule automatically.
    why rule is not getting created during creation itself .
    I though that in the sales order,first service order is getting created and at that time sales order number is not available and hence settlementy rule is not getting populated.
    Is it right?
    Regards
    KRISHNAN

    Hi Pete,
    The system status is  CRTD MANC NMAT PRC.
    People are suggesting that we can able to populate the settlement rule as SDI(Sales document Item) during creation of service order through sales order.(Also adding the point that after creation of sales order only service order is created with details of  Sales document number in the order header)
    In that case why in my case its not pouplating?
    Regards
    KRISHNAN

  • Delete Result Analysis Data - KKA9

    Hi,
    After executing Result Analysis in KKAK for Sales Order, from KKA3 I was able to view the line items created.
    I deleted the Line items from KKA9 and was successful.
    But still I am able to view the old line items from KKA3.
    Please let me know why the line items are still existing in KKA3 even though the deletion was successfull.
    Thanks
    Satish

    Hi,
    Thanks for the reply.
    In KKA3 I was selecting from menu Result Analysis-->Display Line Items of RA which shows the RA Line items created.
    If we delete Line Items through KKA9 should the old data get completly deleted from KKAA.
    Thanks
    Satish

  • Result analysis for sub-items on SD-order

    Hello,
    I would like to know, whether also the document flow for subitems is being checked while executing result analysis.
    Example:
    We have got an SD order, a higher-level item and a sub-item.
    Both of them have assigned the same result analysis key. Within this key it is defined in customizing (OKG3), that the Sales Order Structure is A-"Summarize Plan and Actual Data of Subitems on Highest Item"....so the result analysis for the sub-item is being performg via the higher-level item.
    The higher-level positions is already completed - the delivery is made and also the invoice is created.
    The sub-item is not completed - neighter delivery is made nor the invoice.
    While executing the result analysis for the higher-level item, the status FNBL (final billing) is recognized and all cost are settled from WIP to CO-PA.
    As far as I know, the document flow should be checked withitn the result analysis and based on this the status should be recognized.
    Therefore It seems, that only the document flow from the higher-level item is being checked. If also the document flow from the sub-item is checked, there would be no way to get the status FNBL as the sub-item is not complete.
    Is it SAP standard delivered behaviour?
    Thanks in advance
    Peter

    Thanks Waman,
    I have tried to delete the result analysis key from the sub-item, but still the same result in result analysis...
    Could you tell my the consequences from the 1A setup from the note? It is adviced withitn the note to not use the 1A setup. But we use this and it works fine. Just some messages during the result analysis, that it could not be performed for sub-items, but this has no influence on the values.
    Regards
    Peter
    Edited by: Peter Jankech on Jun 9, 2010 8:57 AM

  • Cannot manually maintain result analysis data

    Hi,
    I am running result analysis for sales order(sales order is a cost object). after calculation of result analysis, and when I click on maintain manually button all the values are grayed out and I cannot maintain the values manually.
    Please let me know what could be the problem
    Thanks
    Naveen

    Hi,
    I have checked all the result analysis settings that I know of including the expert mode in the valuation method with no avail.
    can you please let me know what could be wrong?
    Thanks
    Naveen

  • Advance Procurement through Sale Order

    Dear All,
    I required detail infromation pertaining to advance procurement of ROH items against sale order. If manual Purchase requisitions are being created by assigning sale order as account assignment, exception-20 is coming. I also like to inform project system is n't used. Your earliest reply is highly appreciable.
    Thank you in advance.
    Best Regards,
    Ranjan

    Dear Biplap,
    Exception Message 20 is Cancel process, meaning the system is directing the relevant person to delete the requirement in order to avoid excess inventory. 
    This is bound to come, since u have not run MRP but you are manually procuring the material.  This need not be a point of concern as long as u are aware that the material and qty in consideration is what u require.  Once u run the mrp at a later date, the exception message will change based on the planning results.
    The exceptional messages will not stop you in any of your transaction but it is only a message for the MRP controller to take corrective action, if need be.
    reg
    Kiki
    Award points if this helps.

  • Goods issue dates are different in sales order & delivery

    Hi,
    We have a situation where in sales order schedule line tab goods issue date is 21.30.2011
    but in delivery the planned GI date is 28.03.2011.
    There are two line item in the sales order & in both the line items all the dates are same.
    Same route is there in sales order & delivery.
    In delivery Item category avalability check Off is Y(Do not check avail. when reporting results of pick.request)
    All the dates(delivery,loading,Transportation planning) are different .
    waiting for responce.
    Thanks In advence
    Susrikant

    goods issue date is 21.30.2011
    What was the Actual GI date in delivery??  This should be the same as schedule line date.
    thanks
    G. Lakshmipathi

  • Changing PO date to Actual GI date in Delivery from SALES ORDER(VA01)

    THe Actual Requirement is...Whenever I create a SALES Order with PO date this PO date should automatically trigger in Actual GI date field in Delivery.
    I just want to share my solution before I get some help from you Guys.. I have actually used a userexit MV50AFZ1. This was working fine for me when they are creating the order manually.
    But the client's requirement is that.. it should work for automatic process.. this is nothing a FILE Is being send to SAP through MIDDLEWARE and IDOC get triggers with that... So the CLients wants when this process is happening he wants the PO date of the Sales order to be the ACTUAL GI DATE in Delivery.
    Can you please help me out with this Aumatic Process...

    Shivakumar,
    U would need to check the inbound FM associated with the particular IDOC...you would need to make similar changes as you did in MV50AF71 to fulfill your requirement.
    Regards
    Anurag

  • Requirement generation through Sale Order

    Hi
    I would like to know how requirements are generated and mapped to SAP with Sale order based. All I know is the Make to order process. Is there any other process? Will third party also come into picture.
    Regards,
    Subhashini

    Dear Biplap,
    Exception Message 20 is Cancel process, meaning the system is directing the relevant person to delete the requirement in order to avoid excess inventory. 
    This is bound to come, since u have not run MRP but you are manually procuring the material.  This need not be a point of concern as long as u are aware that the material and qty in consideration is what u require.  Once u run the mrp at a later date, the exception message will change based on the planning results.
    The exceptional messages will not stop you in any of your transaction but it is only a message for the MRP controller to take corrective action, if need be.
    reg
    Kiki
    Award points if this helps.

  • Urgent- Can we change the data in an Approved sales order

    Hi Experts,
    Can we change the data once the Sales Order is Approved. If not Is there a solution to be done through SDK or B1 itself. Any help will be greatly apprieciated.
    Thanks
    John

    Hi John,
    Unfortunately it cannot be done. Because if you are not able do it manually or by User Interface then it will not be possible by SDK or any other approach,as far as I Know.
    Meanwhile you can create a duplicate of the approved document. Make changes to that. And Close or Cancel the approved one.
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

Maybe you are looking for