Results analysis Key determination in sales order

Hi all,
Im having a bit of an issue with our results analysis settlement and was wondering if you could help.
How is the results analysis key determined in a sales order line item?
Many thanks
phil.

Result analysis key is created by CO Consultant, and that result anlysis key will be assign in requirement classes.
suppose created result anlysis key is 000004, this key will be assign in requirement class ( is make to order 040) Configuration.
so there from key will be populated in sales order item. under the assignments teb page.
i think this will be clarify u.
Thanks
Karne Nagaraju

Similar Messages

Result Analysis: Planned Quantity from Sales Order Quantity

Hi,
How to update SO item quantity into planned quantity in transaction KKAK ?
Is there any transaction to run ?
Our scenario doesn't require delivery or production order.
Sorry for beginner question.
Thanks,

Dear Max,
We need to have a valuation method assigned through a Result Analysis key which is assinged in the requirement class of the sales order item. In that we have the customisation for the requested functionality:
Please take a look into the below link for more details:
http://help.sap.com/saphelp_470/helpdata/en/90/ba6f37446711d189420000e829fbbd/content.htm
We have a customisation for Profit Basis in OKG3 and it goes as below:
The profit basis specifies how the system determines the planned costs that are used to calculate the results analysis data. For example, the planned costs may be based on the preliminary cost estimate for the production order or on the sales order cost estimate.
Kind Regards
Umapathi G

Result Analysis Key

Hi Experts,
Can any one tell me the significance of Result Analysis Key for an Internal order master record. Why do we use a result analysis key?
Points Awaiting!!!
Yasmin

Hi
R.A key is just like capitalzation key, which capitalise The WIP .Cost carrier is RA type cost element, which sucks the open production order value(normally at the time of period end closing) and put them on balance sheet till it is closed . If u need more information look for PDF file"Product cost made easy" released by SAP, you can download this from Yahoo group (Sapficoworld) by clicking on "files" there
assign points if useful

Sales order item report based on results analysis key and status

Hi,
I am trying to find a a report to generate list of sales order items with following selection
        -invoicing status -invoiced/not invoices (other status)
        -result analysis key assigned to this item (VBAP-ABGRS)
        -system status /released/teco
Basically i am CO consultant and not so familiar with the SD statuses. I tried VA05 and V.26 but all required selections are not available in these reports.
If no standard report is available in ERP, i would like to have it in BI. Can some help me with table fields for statuses.
Thanks in advance.
Regards
Raghu

Hi Raghu
Go to SE16 and give VBUK table and execute it there you can select the following feilds and then check wheather they are meeting your requirements or not.If they are meeting your requirements then create a new Z report by copying standard VA05 key feilds. and include the other feilds which you need.So you take your ABAP team help
Billing status     FKSTK
Posting Status BUCHK
Overall status GBSTK
Document category VBTYP
Regards
Srinath

Default Results Analysis Key in Internal Order Master Data

Hi Expert,
I would like to default specific Results Analysis Key in Internal Order Master Data.
Please advice is the any configuration can perform that?
Results Analysis Key is under Period-End Closing tab (Internal Order Master Data)
Thanks
regards,
ng chong chuan

HI
1. Go to T code KOM1 > Order Type would $$
2. CReate an Order and maintain default values in it like Comp code, etc and also the RA key
3. Now, maintain this model order in your Order Type in KOT2_OPA
4. Transport this customizing request across to all clients
BR,Ajay M

Item Category determination in Sales Order

Hi
How to know, how item category determined in Sales Order. Is there any analysis available in Sales Order level, similar to output or text determination.
Problem here is in a particular sales order, item category is different compared to configuration. Nothing is recorded in change log. How to know, whether system determined this item category or user changed manually.
Regards
Uma

Hi
Problem here is in a particular sales order, item category is
different compared to configuration
I cant take this arguement
Sales order item cate will picked via the config maintained in VOV4
item category is different compared to configuration
Configuration someone might have changed after that sales order created
Nothing is recorded in change log. How to know,
whether system
determined this item category or user changed manually.
During order creation if you are inputting the allowed manual item category manually in salesorder then that is not a change
Hence it doesnot get recorded (VA01 T code)
During order creation a default item cate gets determined if you chnge that to manual, then that is also not a change
Hence it also doesnot get recorded (VA01 T code)
But in VA02 if you change the item category manually then it is recorded in change log
No item category determination analysis is available in standard and not reqd too
In your case only this could have happened
Configuration someone might have changed after that sales order created
Regards
Raja

Change Result analysis key in WBS element

Hi Friends,
Is it possible to change result analysis key in WBS element?
Any thoughts/suggestions would be welcome.
Regards,
Soumya

Hi Soumya ,
Changing an RA Key in a WBS Element is easy and it just any normal activity which one can do. But the important thing is that you will have to look at the potential repurcussions which will arise because of changing the RA Key. As long as both the RA keys have the same valuation method and other relevant settings , changing would be OK. If the Valuation methods are different then there would be inconsistencies in Financial Accounting as the computation of revenues / cost of sales would be differing.
Excercise due caution .
Regards,
Venkat.

Sales Order Output - determined by Sales Order Type, Created By

I want have my order output determined by sales order type
(vbak-auart) and created by (vbak-ernam).
I have created a condition table 501, access seqeunce Z001.
In v/48, in accesses for Z001, I created
AcNo: 10
Tab: 501
Requirement: [empty]
Exclusive: unchecked
in fields, I can't find ERNAM in structure KOMKBV1(header), but I find one in KOMPBV1 (item).So I have assigned it to ERNAM.
besides, I have created the corresponding records in VV11
I expect to have:
Output Z001 will be created for sales order type OR if created by user XXX
However, no output is generated. When I go out detemination analysis, I found that in the output determination procedure, it did go into output type Z001, but, since no value is found for "created by", i got message "Access not made (initialized field").
I suspect that no value stored in KOMPBV1-ERNAM. Do you know how I can get it done?
Points will be awarded for useful information. Thanks in advance.

Hi
You have to include this field as a Zfield in the structures KOMKBV1, KOMPBV1 and KOMB.
You have to include the field as Zfield in these structures.
Once this is done, you should also be able to update this field in the structures.(As on now, you have only created a field, but you have not mentioned how the field has to be updated.
In order to update the logic, you have to do a small code in one of the user exits for outputs.
In the user exit, you have to write a code like this
MOVE VBAK-ERNAM = KOMKBV1-ZERNAM(this is the zfield you have created)
Now create the condition table and do the rest.
Your output should work fine. The user exit I was saying is the subroutine USEREXIT_KOMKBV3_FILL in the include RV61B902 in the user exit RVCOMFZZ. If you can give this info to the technical guy, he should be able to find out the same for saels order output also.
The user exit RVCOMFZZ also has the subroutine USEREXIT_KOMKBV1_FILL which you can verywell use for your requirement. This will solve your problem
Hope this helps.
If you have any problems in this, you can again put the problems in this thread. I will try to solve.
Reward if this helps you

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Pricing procedure determination in sales order

Hi Experts,
In our business scenario, we have three plants and all plants have different pricing procedure. And we are using same sales area and sales document type for all plants.
Currently one customer is purchasing goods from only one plant. So in our system, pricing procedure determination in sales order based on customer pricing procedure.
Now as per new requirement, same customer will purchase goods from different plant. And we can’t change or create new sales area and sales document type as per our existing system design.
So can we change customer pricing procedure at a time of SO creation level? If yes than how?
Regards,
Haresh

Are you a functional or developer?
Hope are aware that as per SAP standard, pricing procedure(OVKK) is determined based on
(1)
Sales Org
(2)
Distribution Channel
(3)
Division
Customer Pricing Procedure
(5)
Document Pricing Procedure
Sales area determined in your sales order or billing doc
Determines from Sales Data of Customer Master
Determines from sales(VOV8)/billing(VOFA) doc type
In addition to that sales order is created for only sales area, which you select based on your customer sales area while creating the sales order.
Now, keeping above facts in mind, can elaborate your requirement again.
Thanks, JP

Batch Determination at Sales order

Dear Friends
The batch determination at Sales order level, the selection criteria
shows characteristic LOBM_LFDAT, which is Batch determination delivery date
however this date differs from the actual delivery date from schedule line
or the requested delivery date.
As I searched this is not maintained as a characteristic in the Class.
nor in Batch master record or any strategy.
How is this coming by default.
please guide
Kind Regards Ravi

Thanks

Batch determination at sales order level

Dear All,
We are using my sap erp ecc 6.0.We are using the batch determination at sales order level.We had a problem whenever customer requested deliver date is beyond the RLT date then all the old batches which are already assigned and dispatched with some other sales order,that old batches are becoming filled with 999,999,999....(infinity stock).And at the same time it is determining the batch for the sales order line item.
please help how to stop the old batches filling up with infinity stock.
regards,
Hari

please look into this and throw some light.
regards,
Hari

How to configure Reserves Settings in WIP-Result Analysis Key

Hi,
I need to Capitalize the un-realized revenues/Cost?. I came to know that it can be fixed by doing configuration in Result Analysis Key. What are the settings that i need to do in WIP configuraion (Product Costing). Kindy help me or provide me some inputs to full fill this requirement.
Thanks
Kishore

Use Tcode OKG5 - Assign the required Cost elemnets to a Line ID, under "Req To Cap" coloum.

WIP according local GAAP vs IFRS - only one result analysis key

Dear experts,
I am faced with the following issue. We use WBS-elements for long running activities. We set result analysis key on WBS-element for periodic WIP calculation. The actual result analysis key is set up according local GAAP.
Now we want to implement parallel accounting according IFRS. Here we can use percentage of completion for valuation of our project(s).
How can we handle two methods of WIP calculation? We can only set one resulat analysis key on WBS element?
How do you handle this issue.
Thanks for your reply in advance
Regards,
Butch

Thanks for the quick feedback.
Maybe some additional information:
01 - IFRS (real time link with FI)
02 parallell currency deprec area
20 - LOCAL GAAP
50 - Grants IFRS value (investment measure support area) linked realtime to FI
51 parallel currency deprec area of 50
60 - Grants Local GAAP
I already checked the SAP library and the SDN forum, but could not find anywhere how to set up the depreciation area(Grants LOCAL GAAP) to which the investment measure is not directly linked to (not the support area (50) in Tr ANVEST).
Is it possible with only one investement key to fill the IFRS (50) & Local GAAP (60) value investment depreciation area and still depreciate them in different ways?
Thanks again!
Kr,
Roeland

Results analysis Key determination in sales order

Similar Messages

Maybe you are looking for