Results mismatch between query and web item

Hi SDN,
I have a query which produces 12 fiscal quarters for the last three years and the query is working when I run it by itself. The query is based upon a multiprovider.
I use this query as a DP for a checkbox web item. When I run the web-app, the web item (checkbox) generates a lot of values, far more than what the DP query by itself generates.
How is this possible? What is it that I am doing wrong?
Thanks.
Saf.
PS I always award points.

Safdar,
It could be that the web item is retreiving the values frm the master data .. as Bhanu has mentioned - there is a checkbox / dropdown for the properties of the web item for droipdown where you have to change it from master data to posted values or you can also set this in the BeX tab of the particular infoobject. That way it would fetch values from the transaction instead of fetching the same from master data.
Arun

Similar Messages

Mismatch between query and LISTCUBE result

Hi,
I have a query in which I am displaying a KF for 1 characteristic (whose values are restricted to certain nodes from it's hierarchy). So I am getting the KF total for each of the values of the characteristic. The problem is, this is not matching with the output of LISTCUBE transaction, which just displays the records in a InfoProvider field-wise. When I am checking the KF values for the same characteristic values that I used in my restriction in the query, the totals do not match.
There is another characteristic belonging to the cube (to which the above query is associated). In the query result, only those KF values are being considered for which this characteristic has unique values, i.e. for all those records for which this characeristic has the same value, only one KF value (don't know which one as the KF is a counter and always has a value of 1) is being considered. The same thing is happening when this other characteristic is both present and absent in the free characterisctics list. Why is this happening?
Thanks

Hi Sanjeev,
A few questions or further points to check, I know these are simple but I think worth checking.
Have you tried to run your query in RSRT and display the results with/without using aggregates? There could be an issue there.
Also just to check I know this is simple but it has caught me out in the past, when you are using LISTCUBE if you select a MultiProvider as the DataSource show the InfoCubes that you get hits on as well, this could be a reason for a miss match. Also are the any calculations during the run time of the query.
Regards
Ben
PS Assign Points if useful

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

Color mismatch between CS4 and Canon PIXMA PRO6500

Hi there! I am trying to research if anyone else is having a problem with color mismatch between CS4 and their printer. Last night I printed a .tiff image out of CS4 to my Canon PRO6500 printer and the sky came out purple / pink! It was supposed to be a stormy grey color. I have the color management turned off on the printer settings. I have CS4 manages color turned on and the correct ICC profile selected for the paper I am using. When I do a soft proof in CS4 the image looks fine, but when I print I get something completely different, mostly with the sky (purple / pink) color! Just for the heck of it I did a Print Preview under my Page Setup and guess what, the sky actually shows purple / pink! So I have no idea what's going on. I checked all my setting, ink cartridges, tried different paper with the appropriate ICC profile and no dice. Still have a goofy looking sky! I thought PROOFING the image is supposed to show you how the printed image is going to look? apparently it doesn't because it's not. The Print Preview has an accurate representation of the print but I have no idea where the pink / purple sky is coming from. They are supposed to be stormy clouds as I said. I appreciate any help anyone can provide .
Sabciu

I have the color management turned off on the printer settings.
But do you have a measured color profile based on a sample print? Most likely not, so this is not doing anything in your favor. The current profile may present the defaults for a given printer, but not the actual density based on your other printer settings. So by all means, unless you can be sure to obey a full calibration throughout, turn on the printer CM. Also, since it is a Pro model, you may actualyl have to use the dedicated RIP software that was bundled with it to get correct results, not the default windows print engine.
Mylenium

Filters Query and Web Template

Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KS

the filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

Mismatch between availability and marker

I have run the following command:
/repvfy -detail -fix -pwd password
and am seeing a section called "Mismatch between availabiltiy and marker". What does this mean? I know there is a bug out from Note: 735957 against 10.2.04 and that patch 6951116 is available. I also know this bug is fixed in 10.2.0.5. But I don't know what exactly this section is telling me. Here is the output I am seeing:
6. Mismatches between availability and marker
TARGET_GUID TARGET_NAME TARGET_TYPE MARKER_AVAIL_STATUS MARKER_TIME CURRENT_STATUS START_TIME
9CB8EE19415C3C6B55954BF3346C1106 ssan-Internal Concurrent Manager oracle_apps_icm 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:22
1B21AAEF5AC63DD44FE339B7852EA1EE ssan-Report Server_ssan_devstar2 oracle_apps_reports 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:13
F5EAD749526EC1116A70157771E3D011 ssan-Oracle Workflow Agent Listener oracle_apps_wfalsnr 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:29
CD32714673BC508CDBF85BF191A5A1B7 ssan-Workflow Background Engine oracle_apps_wfbg 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:26
FADA1D6BF4DFD0E8AA1739A6666BA210 SSAN oracle_database 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:40
0BE2ACE2EDC7271744DA1A249E30C9A5 APPS_ssan oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:12
89D241EEEF24821E30AD66741BC3D433 devstar2.rtd-denver.com oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:20
F40BAF501645A5957A498E7A270AEA47 ssan-Apps Listener_ssan_devstar2 oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:28
8 rows selected.

Various provision like Freight, transport etc .
these should go to separate GL accounts. if you give wrong account assignment value will be passed to GRIR. then difference will happen
sunoj

Mismatch between sound and video

When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
What can i do to solve this problem?
Thank you!

Am I the only one suffering this issue with the video transcoding?

Config mismatch between VSM and VPath - CSCum76142 bug

Hi all,
I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks
regards,
Robin

Hi Robin,
This DDTS was Junked. But here's the workaround that is mentioned:
1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
2. Toggling the port-profile should also work.
I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other Data Center Subjects" forum for detailed and quick answer.
CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Diff between TAN and TAS item category

hi
wht is the diffrence between TAN and TAS item category and how to configure during implementation stage.
Thnaks

Hello,
Main difference between TAN and TAS is, TAN is relevent for delivey and TAS is not relevent for delivery.
TAN is used in normal business process and TAS is used in third party process.
In the item category determination it will be like
OR -- NORM--> TAN --> TAS
OR --> BANS --> TAS.
Prase

Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc. When I send it back to the Organizer, it look much too contrasty and dark. When I use the same images in a slideshow originating in Organizer, they still look too contrasty. Is there a way to correct this? I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response. I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide". I'm not sure what to do on that one. I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly. If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa. Have any suggestions for me? Thanks again.
New update. I have a Dell color laser printer, and I just checked the manual. It offers both sRGB and AdobeRGB. My priority is really to have a good printout. If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB. The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it. I'll do that, and then see if that helps the mismatch between Organizer and Editor.

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Authorization to query and web template in BI 3.5

Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks

Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM

BW Bex query and Webi question

Hi All.
Just a quick question on Bex queries. We are selecting a Bex query as a source for universe. However on the webi side we only want to see a subset of the data.
1) The question is Would this rerun the entire BEX query on the BW side ? Or is there a better way to design the universe ?
2) Also are there any best practices on how to desing Webi reports from BW BEX queries and also Infocubes etc ?
Thanks in advance.

Hi puneet,
The WebI builds a query on the BEx results. The query is related only to those items used in the WebI report. However, the BEx query must have the results in it, as the WebI does not execute it. I am not aware of a best practices document.
Regards
Alan

SSRS - How to display all the results from a query and then be able to filter the data

Let's say I have a simple query that will return products name, ID, price
SELECT pname,
pID,
price
FROM products
When I display the results in SSRS the user will (without entering any parameters) see something like:
Product Name | ID | Price
xyz 1 $10.00
.zzz 10 $4,000.00
How can I filter my results once they are displayed? For instance, Out of the results the user wants to see only the products where price is between $10 and $3000?
-Alan

Hi Visahk,
Maybe I did not explain my issue very good.
I want the user to first see all results (without entering the price range) - then if he wants she/he can filter the results by price.
As soon as I add
WHERE price BETWEEN @StartPrice AND @EndPrice
to my SQL query, the user is prompted to enter a price range before seeing any data.
-Alan
Ok for that what you can do is to set allow null value property for the parameters.
Then set NULL as default value for parameters in parameter properties tab
and make the query as below
WHERE price BETWEEN @StartPrice AND @EndPrice
OR (@StartPrice IS NULL AND @EndPrice IS NULL)
and then report will get executed without waiting for any prompt and user may change values at a later stage and rerun it
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Results mismatch between query and web item

Similar Messages

Maybe you are looking for