Results recording copying from another lot

Hi,
Is it possible to copy results recorded from one inspection lot to a newly created inspection lot.
Please let me know about any possible options.
Thx
Viny

Hi Viny,
Refer the link.
[Thread - 1|copy inspection result;
[Thread - 2|Copying the values of inspection result from one inspection lot to another;
Regards,
Shyamal

Similar Messages

How to create a basic pay wage type without copying from another wagetype

Hi Gurus,
How to create a "New Wage Type" without copying from another wagetype?
& i want this wage type "Non Taxable" as per my organisation requirment.
pls send me config docs on my email id. Pls it is very urgent
Email: [email protected]
Pls Help me
Regards
MHPO

Hi Ram,
Thanks
One more thing should i create "Non taxable payment wage type" in Basic Pay.
in Basic pay there is no any wage type copy Non taxable Wage type but Additional Payments there is one Copy Wage type name is "M400 Non taxable payment"
i check the all config related setting related to M400 non taxable payment
can i copy in Basic Pay any wage type & create new wage type (xyz)
& i change all setting eg processing class & all is similar in (XYZ) =M400
its is ok or not

User copy from another client

hi guru
how can user copy from another client
thanks

Rajesh,
If you are looking for copying users on same server to another client, please follow the below steps:
Logon to target client.
Execute Tcode SCCL. In SCCL choose source client and choose profile SAP_UONL.
Now select "Schedule as a background job"
This will copy only users to your target client.
Thanks
LK

QM-Result Recording transfer from one material to another material

Dear QM masters,
I have following scenario:
Material A has Material B as a component and Material B has Material C as component. Material A is batch managed. Material C has in-process inspection with partial lot using inspection point functionality. Last result recorded for this in-process inspection should be used for quality certificate of Material A.
Thanks a lot in advance for any help extended and will be rewarded with maximum points.
Thanks and regards,
Devang

Since you are in ECC 6.0 you can also use batch derivation to have the components values copied to the next material being made. In this way, batch values for Material C get copied to material B batch and material B batch values get copied to Material A batch.
Then on the cert, you only need to report the value from the material A batch. No need to set up the result from production chain in the COA profile.
Craig

Multiple results recording for Delivery inspection lot

Hi Gurus,
My requirement is to configure for quality results recording for sales delivery document. Where client wants to record Customer, supplier, Umpire, etc results record for inspection characteristics.
I got response from few Sapiens that I should use Inspection point concept for multiple results recording. Could anyone cna tell me how can I do this.
Your help will be highly appreciated.
Thanks,
Kumar

Hi Kumar,
Okay!
First of all letu2019s try to understand whether inspection points are really suitable for your requirement or not. Accordingly further errors can be eliminated. I just try to understand.
A- Using Inspection Points
1.     Inspection points are used when you inspect the same parameters again and again.
2.     When you click on results tab in QA32, system asks you put some identification number. Letu2019s say you put A1 and then press enter. Thereafter you record the actual results (LENGTH, WIDTH etc.) You save this without giving UD.
3.     For the next time when you again click on results for the same inspection lot, system again asks you to put identification number. This time suppose you put A2. Then again you record the results (LENGTH, WIDTH) for A2.
4.     Likewise you can retrieve the inspection results from system with respect to inspection point (identification point).
5.     Typically this can be used for chemical industries where you record the temperature of the same chemical after every ½ an hour. Here 10:00 am, 10:30 am can be used as identifications numbers. As a result of which you can get the information that at 10:00 am temperature was 40 Deg and at 10:30 am it was 75 degree Celsius.
If your requirement resembles this situation, then only the use of inspection points would be fruitful.
B- Without Inspection Points
But if you want to record the readings by various agencies like customer, umpire (refer following pattern)and want to compare them there are other ways.
1.     Reading by your inspector
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
2.     Reading by customer
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
3.     Reading by umpire
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
You can achieve this without using inspection points also. For this in QP02 you need to create 3 operation; Inspector, Customer and umpire respectively. Feed the MICs in each of these operations. When you click on result tab system will throw pop up for these 3 operations. Double click on Umpire if you want to record results noted by umpire. Likewise for rest of the operations. You can do this even after UD also (after 1-2 months also). You need to use MIC with control indicator as long term characteristics for this in QS23.
Regarding averaging of results u2013 This can be achieved using single result recording MIC with or without inspection points. Use appropriate sampling procedure. When you feed results in QA32 system automaticaaly averages out the reading. This can be viewable against phi symbol.
Finally you did mention that u201Chere I am not getting the newly created inspection lotsu201D. Does that mean inspection lot (10 origin) has not created?
Regards,
Anand Rao

Copy and paste copy from another document

Hi,
Somewhere I've changed the color type is presented when you create a new text block and can't find where to change it. So everytime I start a new block of text or when I copy and paste from another document (word, email) the copy color has to be manually changed to black to see it. Where do I change this preference?

Thanks for speedy reply. So that fixed my new doc - when I put in new copy it is black. On the previous document, with no text select - click on the text tool and swatch shows it will be black. Draw the box on the layout - swatch switches no color (white box with a red slash). So, I unselect everything again, click on the text tool and it shows it will be black. Click inside the text box and it goes invisible again. Switch to color - click on text tool and it shows it will be black, but as soon as I draw the text box - shows it will be invisible. Shut down Indesign, restart - nothing gives.
Again, thanks for your reply. This isn't major just one of those little annoyances that is so minor with all the other stuff going on ... but with snow leopard problem - I just don't want to mess with too and I can't fix the other. giggle.

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

CS5 - Help copy from another application and paste into CS5

I am not able to copy an image from another application and paste into my CS5 image.
I can paste the image into any other program except for CS5.
Does anyone know how this issue can be fixed? Very frustrating, since it is such a simple process.
Thanks!

You probably have at least one plug-in made by Nik Software. They're known to interfere with Photoshop's ability to access the clipboard.
I believe there's a Nik configuration file change needed, or possibly a removal of all or part of the plug-in to restore Photoshop's access to the clipboard. There's another thread on this forum that's gotten quite long on the subject, and in it are some possible resolutions... Ah, here it is: http://forums.adobe.com/thread/680075
-Noel

How do I import bookmarks from a Favorites folder that I've copied from another computer? I'm using Win 7

I copied the "Favorites" folder off off another computer and now have in on a local hard drive. How do I either point Firefox to it or import those bookmarks. I'm using Win 7 and Firefox menu has no "Import" function that I can find.
Thanks,
Rich

Firefox can't handle the .url type IE favorites.
You would have to copy the favorites in that folder to the current IE favorites folder and see if you can import the IE favorites in Firefox.
If not then you need to export the favorites in IE to an HTML file and import this file in Firefox.
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Slide size issues with copy from another project

Working with Captivate 4. I have a completed project where I have a slide I would like to re-use in a new project. The recording options for each project are the same - full screen recording. The image is being cut off all the way around the when I 'Copy Slide' in Project A and 'Paste Slide' in Project B.
If the layout size is the same, why is the image being cropped/adjusted in the Paste? Is there any way to adjust the size of the image when pasting an entire slide into a project?
Thanks in advance,
D

Hi again
Seems odd. But I may have a workaround. What if instead of copying the slide, you simply insert a Blank slide in the new project? Then you copy the background of the slide from the older one and paste as background into the newer? Results the same then or what?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

Multiple result recording for Manual inspection Lot using inspection point

I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
inspection" Message no. QE094.
Plz give me the solution to record the result.

Reason is very simple : the the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL

Error while activating a screen copied from another program ??

Friends,
i have a requirement wherin a screen should come as a popup when a button in the selection screen is clicked.
The same screen which needs to be displayed, is also present in another program.
So i copied the screen and the appropriate fields and variables, with the same names etc.
But when i try to activate the code, i get an error stating "Error when generating the selection screen 'XXXX' of report 'XXXX'.
What could be the reason behind this ?
Regards.

no ....
I tried with a different screen number..
still the same error..

Recording audio from another application

My kids use a program called Smart Music which plays the accompianment parts for them. Is there any way to record the audio that that 3rd party software application in Garage Band?

take a look at audio hijack, or wiretap. either will record from any app

Can i query from a results which got from another query?

if i query a container and i get a results,then if i want to query in the results,can i?and how to do it?
thanks a lot!

Hi Turingcat,
In the dbxml shell you can use contextQuery. Here is an example on a test container holding the following documents:
dbxml> getDocuments
4 documents found
dbxml> print
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node><node><aa>5</aa><bb>6</bb></node></doc>
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node></doc>
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node><node><aa>5</aa><bb>6</bb></node><node><aa>7</aa>
<bb>8</bb></node></doc>
<doc><node><aa>1</aa><bb>2</bb></node></doc>, that first retrieve all the documents that have a <bb>6</bb> node:
dbxml> query "for $i in collection('mnodes.dbxml')/doc where $i/node/bb=6 return $i"
2 objects returned for eager expression 'for $i in collection('mnodes.dbxml')/doc where $i/node/bb=6 return $i'
dbxml> print
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node><node><aa>5</aa><bb>6</bb></node></doc>
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node><node><aa>5</aa><bb>6</bb></node><node><aa>7</aa>
<bb>8</bb></node></doc>and afterwards, queries the result set and retrieves the document(s) that has a <aa>7</aa> node:
dbxml> contextQuery "let $s:= . where $s/node[aa=7] return $s"
1 objects returned for expression 'let $s:= . where $s/node[aa=7] return $s'
dbxml> print
<doc><node><aa>1</aa><bb>2</bb></node><node><aa>3</aa><bb>4</bb></node><node><aa>5</aa><bb>6</bb></node><node><aa>7</aa>
<bb>8</bb></node></doc>Now, using the APIs, C++ or Java, you can achieve this functionality by obtaining a result set (either through an XmlQueryExpression.execute() call or an XmlManager.query() call), and than constructing an XmlQueryExpression which will be used while iterating the result set to query against each XmlValue context item (the XmlQueryExpression.execute() forms of the method with an XmlValue &contextItem parameter).
Regards,
Andrei

Results recording copying from another lot

Similar Messages

Maybe you are looking for