Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

Similar Messages

  • Result recorded values not appearing in printing the Inspection lot

    Hi all ,
    Using QC21 i am printing the Inspection lot  but the Result recorded values  are not appearing in printing the Inspection lot .
    while creating the certifacte  profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
    can somebody help me on this .
    thanks ,
    ksr

    Hi
    1.Make sure that you are using same MIC in Task list & certificate.
    2.make sure that you have done RR & taken UD.
    3.make sure that MIC is reference MIC.
    4.Make sure that profile is attached to material
    Regards
    Sujit

  • Shipping tab not appearing in PO

    Dear Sir,
    I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
    I dont know wht step i hv missed out, please advise what should i do.
    Looking forward for your quick response on th same.
    Regards
    Parul

    Hi Parul
    Pls check the following settings.
    1.     Define receiving plant for sto. (Storage location also for this plant if required).
    2.     Assign receiving plant to company code.
    3.     Assign receiving plant to the supplying plants sales org, distribution channel.
    4.     Assign shipping point of supplying plant to receiving plant.
    5.     Maintain purchasing organization and assign it to receiving plant and company code.
    6.     Create receiving plant as a customer in supplying plant (normal customer creation).
    7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                         Select receiving plant and assign customer number (previous step number)
                         Assign the sales area of supplying plant.
                         Select supplying plant assign the sales area of supplying plant
    8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
    9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
    10.     Extend the material to the receiving plant.
    11.     For Second plant assign manual shipping point as of first plant (OVL2)
    Br.
    Ramana

  • Results recording could not be carried out

    Hi all ,
    You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported .
    where can i find the setting in the material master so that i can make result recording .
    thanks
    ksr

    Hi
    Go to mm02>Qm view->sleect inspection type--->click on check char & Inpsect with task list
    then result recording from next lot will be possible
    Regards
    Sujit

  • Excise Tab not appearing in MIGO Screen

    Excise Tab not appearing in MIGO Screen
    Reg
    Sunil

    Hi,
    For GR, which movement type you are using...?
    If it is 103, you will get the excise invoice tab only in 105 GR.
    If it is 101 only, check the following configuration.
    SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
    Please revert for further analysis.
    Regards,
    Siva

  • Vendor evaluation tab not appearing in ML81N

    Hi,
    Vendor evaluation tab not appearing in ML81N.
    Please suggest

    Hello,
    Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
    Thanks.
    Regards,

  • Today's inspection lot not appearing in qa32 & so processing through qa02?

    Hi all,
    Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
    later on i processed the ud through qa02 only
    regards,
    Sanjana

    Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
    later on i processed the ud through qa02 only
    Dear as per my understanding give the exact material code,if batch managed give the batch also,give the lot created date etc and again check in QA32 as you saying you can able to access inspection lot through QA02 then it must be visible in QA32 also.
    Select the all inspection lots radio button in QA32 if still you couldn't able to find the lot in QA32 as UD might have already done.
    Cheers
    KK

  • Part 1 generated while creating migo but display mode Excise tab not appear

    Hi
    I created migo Part 1 generated. and excise tab also appeared.
    but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
    Please explain What could be the reason
    Regards
    sitaram

    Hi
    Please any body give me valuable suggesition.
    Thanks and regards
    sitaram

  • HR BENEFIT:dependent tab not appear

    Dear Experts,
    I got problem with HR Benefit Administration.
    When I do the Enrollment process, dependent tab not appear.
    I check in IT0021, family member was there.
    at SPRO - at step "Claim Variant for Plan" I did check claim grouping
    so, at "Claim Rule for Plan" I choose the claim group and add dependent cover.
    my problem is when uncheck the claim grouping at claim variant for plan - dependent tab at enrollment appear.
    BUT I need those claim grouping as for rule plan, but then dependent tab not appear.
    how to make it appear?
    is there any missing configuration?
    thanks in advance
    Edited by: nzworld on Oct 18, 2011 4:39 AM

    Hi,
    anyone got this situation?
    thanks

  • QM-Inspection Lot Posting tab not found in QA32 -UD

    Dear All,
    I am not getting the Inspection Lot posting Tab in the QA 32 Usage Decision for the Inspection type -01.
    various steps are as follows,
    1.  I raise the PO for the material, and release it.
    2.  received the material by MIGO against that PO.
    3.  I got the lot in QA 32.
    4.  I did Result recording, without any error.
    5. In UD i accept the Lot.
    6. But Now I am not getting the Inspection Lot posting Tab at UD screen.
    How can , i Post the Lot .
    Thanks and Regards,
    Neeraj Singh

    Hi Neeraj!!!
    May be this can help you out. You please do the procedure as follows-
    1) You get Worklist for inspection lots by QA32.
    2) You plz select a single lot, go on inspection lot, inspection specification tab, press "task list specs". It will assign task list to your insp. lot.
    3) Press "back" and press "Usage Decision", accept the lot in "UD code" box and give quantity in "inspe.lot stock".
    4) Press "Save".
    Now you have cleared your lot from Quality, So you wont be able to see this lot in QA32.
    If your problem is other than this, kindly quote else....
    cheers!!!!
    kapil

  • Shipping data tab not appearing while creating intercomapny STO PO

    Hi all,
    I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
    Kindly help in this.

    Hi,
    1. Please check in your vendor master  in T-code XK03
    2.  In vendor master , the plant might have defined as plant as vendor  in Tab purchasing data > Extras >additional purchasing data,
    3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
    Regards,
    Ajit

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • New entries tab not appearing in tcode VOR1, VOR2 in application tool bar

    Hi guru's
    Suddenly overnight the new entries tab present in the application tool bar seems to have been vanished from tcode VOR1 & VOR2, in the sandbox, development & quality server, even when the client is open, i.e in tcode SCC4 we have allowed changes to be made, protection level is "0" and changes to repository and cross-client customising allowed.
    Please suggest where & what are the other changes I have to make so that I can get the new entries tab in tcode VOR1 & VOR2
    Thanks & best regards
    satish

    Hi Venkat
    That is where the problem lies. The sales organisation, distribution channel & division has been defined & assigned and even the respective sales area's has been assigned to the respective document types.
    But still the system ECC 6.0 does not allow to create any sales orders because the assgnment in tcodes VOR1 & VOR2 is still pending and the entries do not appear there by default.
    Once again the  distribution channels and divisions has to be assgined to the respective sales organisations in VOR1 & VOR2
    But since the new entries tab is absent I am not able to create any new sales orders because the assignment in tcodes VOR1 & VOR2 is pending.
    Please suggest a solution.
    Thanks
    satish

  • Excise tab not appearing in GR display

    Hi,
    After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
    Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
    Thanks,
    SR

    Hi,
    As per my understanding ......
    While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
    But when u post part1  only, then Excise Entries also found there.
    But after posting Part1 in MIGO and Part2 in J1IEX,
    while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
    u can observe there entries like this
    During GR
                                        Material Stock            Dr.
                                        GR/IR clearing                        Cr.
      During Excise Invoice Credit           
                                        Cenvat Account          Dr.
                                        Cenvat Clearing                     Cr.
    Hope Clear U !
    Regards,
    Pardeep Malik

  • Object Ref Prof R/s tab not appearing in complaint Tx?

    Dear All,
    I added object ref profile in complaint transaction. But I am unable to see relationship tab at header or item. The same profile is working fine with Service order. But its not working in complaint transactions.
    Please suggest.

    Dear Arun
    Thanks for your valuable input. But pbm is if I use reference data tab then sold to party of the tx in which we are putting ref data and sold to party of ref data shoud be same..otherwise it will not allow to attach..
    Please suggest why relationship tab does not appear and is this product error?
    Thanks

Maybe you are looking for