Resume and job application hardware and software?

What software and hardware is best/most efficient/stable to send out resume and fill in job applications? I have 1-15 minutes of time slots that I would like to use to find a better job. I would like to find something small enough to carry with me and not be noticed. Also how about the services used to connect the hardware, Verizon, AT&T, Sprint... Any wisdom is appreciated. My resume was made with pages. Thank you!

Hi mountainbiker,
Well, I'm sure it's not AppleWorks.
You're in the AppleWorks forum, dedicated to questions about issues and techniques specific to Apple's productivity application AppleWorks.
"Small enough to carry with me" would suggest the iPhone forum as a possibly appropriate place for your question.
Good luck with the job hunt.
Regards,
Barry

Similar Messages

How do I copy and paste a downloaded resume into/onto a job application in a potential employers website?

How do I copy and paste a resume from my downloads into/onto a job application on a potential employer's website?

Not knowing the format/design of the employer's website, it's difficult to know.
Why not send your resume via regular mail or email. Just fill out the application the way the employer wants you to.
 Cheers, Tom

Best device for on the go filling out job applications and sending resumes?

What is the best portable device for filling out job applications and sending resumes?
I have short periods of time at work between 1 to 15 minutes were I would like to apply for jobs and send out my resume. I use a MAC laptop g4 at home. I have had windows computer until about 4 yrs ago and hated it. I-phone, blackberry, Palm, or some other? What is best? Also what about cost and quality of connection to the net via AT&T Verizon or whatever? Thank you.

You don't need to post the same question twice.
This is an iphone users forum designed to help people with issues related to using their iphone.

How do I copy a PDF document and paste to online job application?

I have a resume in a PDF file. I'm trying to copy and paste it to an online job application. I'm not very computer savvy, could you give me detailed directions how to get it done? PLEASE

Okay, hope I can help.
* Open up PDF file
* Select the text using the built in computer tool
* Right click and select copy
* Find where you insert the text for your resume and right click again then select paste

Application notes, related software On Measurement of sound and its analysis

Please send me Application notes, related software On Measurement of sound and its analysis.
Also send me list of the hardware and software required for sound measurement and analysis.

The software you are looking for would be LabVIEW with the Sound and Vibration Toolkit. With that you will not only get the tools you need, but a good deal of example programs to help you along the way.
From a hardware point of view, our Dynamic Signal Analysers are perfectly suited for sound and vibrational measurements. We also have a large line of Data Acquisition devices that are also well suited for these types of measurements.
Here are some links that may help:
Products:
http://sine.ni.com/apps/we/nioc.vp?cid=1382〈=US
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=3122
http://sine.ni.com/apps/we/nioc.vp?cid=3472〈=US
App. Notes:
http://zone.ni.com/devzone/conceptd.nsf/webmain/CE46CCEDEBE745FA86256CC3007F9C06?opend
ocument&node=10521_US
http://zone.ni.com/devzone/conceptd.nsf/webmain/7023E833D245AD3386256D0A004D44C3?opendocument&node=10521_US
Sound and Vibration Toolkit User Manual:
http://digital.ni.com/manuals.nsf/websearch/B785E3CEABEB742486256E6D006845B8?OpenDocument&node=3122_US
I hope this helps you out.
Best Regards,
Jeremy R.
NI - Applications Engineer

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

Remote Desktop Services - VDI / Hardware and Software requiremnts

I am going to plan to do POC for 50 user on customer end for Microsoft VDI installation. For this i required hardware and software requirement.

Hi Pratik,
Thank you for posting in Windows Server Forum.
It all depends on how you want to configure your VDI environment. In Server 2012\R2 there are 2 flavors: Pooled & Personal and further can deploy both that as Managed\UnManaged deployment. You can check following article for further details.
RDS Hardware Sizing and Capacity Planning Guidance
http://blogs.technet.com/b/iftekhar/archive/2010/02/10/rds-hardware-sizing-and-capacity-planning-guidance.aspx
Choose a VDI Deployment Scenario
http://technet.microsoft.com/en-us/library/dn645525.aspx
Deploying VDI for RDS 2012 / 2012R2 – Part I
http://thewolfblog.com/2014/03/26/deploying-vdi-for-rds-2012-2012r2-part-i/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
Regards.

HARDWARE interfacing and software routines

Hello there,
I am interested in finding out a really basic tutorial/note which will allow me to work with the basic communication protocols like SPI , RS 232, etherner, USB, etc. I am looking for tutorial with BOTH HARDWARE interfacing and software routines.
Multiple websites will be ok for me.
I have searched wikipedia and lot of power point presentations but was not successful in landing up with a COMPLETE tutorial which explains the hardware interfacing connections and software.
If you guys can suggest an evaluation kit where i can pracice the above interfacing and software routine..... by all means do let me know.
Looking forward to your reply.

Technically you can do everything you are talking about for free provided you have the internet tool kit installed (Full Development Suite) and depending on what level of detail you plan on going into.
If you want to play with RS232 you can start with just taking the existing Labview example, "Basic Serial Write and Read.vi" under Labview Help -> Find Examples. You can find a serial cable and connect it to your Comm port. On the other end of the Comm port you can insert a small wire to short pin 2 to pin 3 (TX to RX). You will then be able to send and recieve data on the same vi. I would look at wikipedia to learn more: http://en.wikipedia.org/wiki/RS-232
If you have the internet tool kit install then you can do all kinds of stuff with just a regular internet connection. For example any place where you can Telnet you could test using the "Telnet Line Client.vi" provided by Labview. Again I would start by consulting wikipedia if you have questions: http://en.wikipedia.org/wiki/Telnet
If you are trying to do everything down to the hardware level then this is a little more involved. Again break your post into smaller pieces and repost on the Labview forum and you will have better luck getting detailed responses.
You should not have to spend much money to play around. You can build a lot of this stuff yourself or you can purchase very cheep if you shop around. For example you can implement SPI using a parallel port but you need to know what your target SPI interface will be. Regards, SS

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

Update hardware and software Qosmio G30-198 for hight performance

Good morning,
I have a Qosmio G30-198.
I Have to use Autodesk Civil 3D program in the laptop.
It is a CAD program that requires a lot of ram and a high speed data transmission with the HDD's.
For this, it is absolutely necessary to update hardware and software for to use Civil with good performance.
I need to buy and install SSD HDD, install more RAM (what is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.
Please,
if someone can tell me how I can further improve performance of the laptop, please tell me.
I do not know what steps I have to keep.
Can you help me?
Thank you so much.

>.. what a disappointment
Why? How old is your notebook? At this time 4GB was the same when you use 8GB today.
We have mobile machines with limited upgrade possibilities.
> It is better to install hardware or soft ware? (Win 7 Proffesional)
To be honest I dont understand this question. You should upgrade RAM to the maximum level and install Win7. Im pretty sure it will work well on this old Qosmio.
If you need your notebook for some specific operations like usage of Autodesk Civil 3D program you dont even need all drivers or specific Toshiba stuff. the main thing is you have most important drivers, tools and utilities.
> I read in a post that it is necessary to change the video driver and install a diferent that the original one.
Fact is that Toshiba recommends usage of own drivers only. Toshiba offers tested and adapted drivers for usage on mobile machines. These different drivers can help notebook owner to have better graphic performance and this new driver will force graphic card to offer more power but at the same time you must understand that more performance results with more heat. Due to specific design it is very risky for notebooks.
Have you ever cleaned up your notebook? I can imagine it is pretty much dust inside.
> Do you think if I install G50 driver it will work in my G30?
Unfortunately I cannot comment this. Just be careful with this.

I keep trying to upload my resume on job sites on my iPad and there it seems that I don't have a program that is recognized. Is there an app I can get that will allow me to do this? When I click on the tab that says upload resume it says choose from galle

WHen trying upload my resume on job sites I only have the option to choose from photo library. Is there an app I can get that would help with this or one that is like Microsoft word?

Since the ipad, and all apple mobile devices do not have the file structure like on a computer the sites aren't able to locate your file.
Many job sites and employers allow you to 'copy and paste' your resume into a text box on their site.
If they have an email option, then that would be best.
I'm not aware of an app the will allow you to upload your resume. But this seems to be a poplular queston so there might be something in the app store.

How can I open and fill out a Secured Adobe PDF job application?

How can I open and fill out a Secured Adobe PDF job application?

Hi margueritew68053277,
You should be able to fill that out using the free Adobe Reader, or Adobe Fill & Sign.
Best,
Sara

What hardware and software is needed to use share point 2010

Please if enyone could help!
I want to become familiar with the advantages of using excel for example simultaneusly with other users, shere point does it best for us yes??? What do I need to install or what hardware is needed to do that?
Thanks,

Here are the hardware and software requirements for SharePoint
http://technet.microsoft.com/en-us/library/cc262485(v=office.14).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Differences between hardware thread and software thread?

Hi ,all!
The Instructions of SPARC V9 have nothing about thread ID. And there are two bits of CCX packets indicating thread ID.
Does it mean that CCX generates the thread ID of SPARC core?
And, what are the differences between hardware thread and software thread?
Thanks in advance!

Hi ,all!
The Instructions of SPARC V9 have nothing about
thread ID. And there are two bits of CCX packets
indicating thread ID.
Does it mean that CCX generates the thread ID
of SPARC core? Each SPARC core has one unique ID to identify itself when it receives packets, such as CCX packets, interupt packets and so on. Such ID is defined in the Hyperprivileged register. Maybe you can see UA2005-current-draft-HP-EXT.pdf for more information.
And, what are the differences between hardware
thread and software thread?
Thanks in advance!Software thread runs on the hardware thread (or strand).

Resume and job application hardware and software?

Similar Messages

Maybe you are looking for