Resume: Could not stat the resume device file After Update

Peace!
I  -Syu and rebooted to this error:
resume:
Could not stat the resume device file '/dev/disk/by-label/hda1'
Please type in the full path name to try again
or press Enter to boot the system:
Figuring it must be something weird happening to the suspend procedure, I wanted to skip it and boot normally. So I pressed Enter... to no avail.
Waiting for devices to settle .... done.
Root device ' /dev/disk/by-label/hda2' doesn't exist, attempting to create it.
ERROR: Failed to parse block device name for '/dev/disk/by-label/hda2'
ERROR: Unable to create/detect root device '/dev/disk/by-label/hda2'
Dropping to a recovery shell... type 'exit to reboot
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-label/hda2' gets created while you are here,
try adding 'rootdelay=8' or higher to the kernel command-line
ramfs$
Now, I'm starting to think its not just due to the suspend procedure and maybe something more. Afterall, I did not suspend, I rebooted. I remember updating the kernel, klibc and perhaps udev.
I wanted to try adding the rootdelay thing but the grub menu wouldn't show up.
Sobs..
I really need to research on failsafe fallback procedures... some kind of ultimate undo feature.
Last edited by onguarde (2009-01-21 08:39:40)

http://bbs.archlinux.org/viewtopic.php? … 58#p484758
It seems someone else has similar problems...

Similar Messages

  • "Could Not Open the Communication Device"  ???

    I use a dial up connection. Everytime I try to connect to the internet, after it dials a message box pops up that says "Could Not Open the Communication Device". Has anyone else had this problem? And how do I fix it?
    Please help me.

    I found this in Mac Help:
    If you haven't entered your network settings, open Network preferences, choose your modem port (internal or external) from the Show pop-up menu, and enter the settings provided by your ISP, such as the access phone number, your user name, and your password.
    You can also use the Network Setup Assistant to help you enter network settings. Click "Assist me" in the Network pane of System Preferences and follow the onscreen instructions.
    Also verify that the number you are dialing is correct.
    Try this too.
    Some ISPs may require a PPP connection terminal script to connect to the Internet using a modem. If it is required, contact your ISP for the terminal script
    To use a PPP connection terminal script follow these steps:
    In the Finder, navigate to the Library folder on your startup disk.
    If the Library folder does not contain a Terminal Scripts folder, you will need to create it. Choose File menu > New Folder, and name the new folder "Terminal Scripts."
    Copy the terminal script file from your ISP to the Terminal Scripts folder.
    To activate the terminal script, choose Apple menu > System Preferences.
    Click Network and choose your modem port (internal or external) from the Show pop-up menu.
    Select the PPP tab and click the PPP Options button.
    Choose your connection script from the Terminal Script pop-up.
    Click OK and then click Apply Now.
    If the Terminal Script pop-up menu is dimmed, then the script is not being recognized. Check that the script is valid, and it is installed in the correct location.
    -Internet Wiz

  • Getting "Internet Connect Could not open the communication device"

    I am getting a pop up showing "Internet Connect - Could not open the communication device."
    Why is this? I have never got it before and after awhile my internet works just fine. I am trying to understand why it's popping up. The wireless networks I connect to are always working fine but my computer is just now giving me this pop up.
    Please help. Thank you.
    -Mike

    you could try moving either file one at a time, don't delete them though
    if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
    possibly you'd need to setup your network prefernces again
    also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
    on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
    as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
    maybe check Network preference pane, see what shows up in Bluetooth

  • Contribute could not read the shared settings file.....

    We are using Contribute 4 via FTP connection. Suddenly, I
    have one user today that is getting the following error when trying
    to connect to things she should have access to.
    The error: "Contribute could not read the shared settings
    file for this Website because the file has been corrupted. To
    re-create the shared settings file, an administrator must
    administrate the website again."
    As a sidenote, this user had recently been sent approximately
    41 files for review, I have no idea if there is a connection or
    not. This feature has worked fine for them before.
    Anyone see this problem before? I did check and I have other
    users that can access and edit the Website just fine. It seems
    specific to this one user.
    Thanks - Lainie

    I think this has something to do with the PNG plugin.

  • 2147189176 :Logon failed. Details:Could not open the field definition file

    Dear All..
    I get error message when i want to export my report to PDF, like this :
    2147189176 :Logon failed. Details:Could not open the field definition file.
    For information, i'm using database Oracle 10g, Crystal Report XI release 2, and Classic ASP as programming language.
    Can you help me for resolve this problem?
    Thanks for all.
    Regards,
    Yuni

    Let's throw SP 6 for CR XI R2 at this first:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Next. The error indicates that the report is created off of TTX files. If the SP above does to help, please specify the type of connection used in the report. Also, the OS and is it 32 or 64 bit OS?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • "The installer could not copy the necessary support files." Error message on 0S X 10.6.3 Install

    I have just wiped my iMac 21.5' Core i3 3.2GHz as I am going to sell it. This process went as expected but when I try to reinstall the OS from the disk that originally came with the system (10.6.3) it gets around 30% into the install and then produces the error message "The installer could not copy the necessary support files." No matter what I try the outcome is the same and the installation fails.
    I did have the hard drive replaced on this iMac a couple of years ago as it was of a batch that apple said could go pop one day. Do the hard drive and the OS X disk that comes with the system have to match, or is it just a case of a faulty disc? Any help would be greatly appreciated.

    Hi sonicdeathmonkey1882,
    If you are having issues reinstalling the OS on your iMac, you may find the following articles helpful:
    Apple Support: Troubleshooting Mac OS X installation from CD or DVD
    http://support.apple.com/kb/HT2956
    Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
    http://support.apple.com/kb/ts1394
    Regards,
    - Brenden

  • I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

    I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

    Yes.   I've found that works best.  Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth.   Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full.   So unfortunately there is a lot of empty space that is needed for smooth operation.

  • Error: "Could not find the main class: Files\NetBeans"

    I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
    Here is the error: "Could not find the main class: Files\NetBeans"
    thanks!

    nigel25840 wrote:
    I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
    Here is the error: "Could not find the main class: Files\NetBeans"
    thanks!Sounds like something (a .cmd file or .bat file, perhaps) is set up to launch NetBeans with a command line like this:
    java -classpath ... c:\Program Files\NetBeans ...
    So since the path has embedded space(s) in it, it thinks you are wanting to run a class named "Files\NetBeans", which does not exist.
    You need someone there who knows what they are doing to look into it for you.

  • Supressing the "Could not open the communication device" message

    Hello,
    Lately whenever I connect to the internet, an Internet Connect window pops up with the message "Could not open the communication device." The connection, however, is fine, and I have no problems accessing the internet.
    I've been clicking "OK" to this message several times whenever I connect to the internet but it's become tedious and I'd like to supress it. Can anyone help me?
    20" Intel Core 2 Duo iMac   Mac OS X (10.4.10)   I'm using a Linksys WRT54GL to connect wirelessly.

    Check to see what is checked ON in Network>Show:>Network Port Configurations, and drag the one used for Internet to the top of the list at least.
    I think there must be another one checked ON and above the one that actually connects... dunno for sure yet though.

  • Install Failed. Installer could not copy the necessary support files

    I replaced the hard drive in my MacBook 13ac OS X" late 2009. I am trying to reinstall th OS and applications from th CDs that came with the computer. When I start the computer and try to install the OS, it starts to install, after about 2-3 minutes I get the following message. Install Failed. Mac OS X could not be installed on your computer. The Installer could not copy the necessary support files. Click restart to restart your computer and try installing again. I have done this several times with no luck. Is the CD missing something? Is there another way to do this?

    Disconnect any attached hard drives.
    Boot off the disk and try running Disk Utility Repair Disk and Repair Permissions. If that is successful, try to re-install. If that doesn't work boot off the disk and use Disk Utility to erase and reformat the drive as Mac OS Extended (Journaled).

  • Edge Animate could not find the associated html file - anyway

    We have another thread discussing this issue at http://forums.adobe.com/message/5331743
    But it is out of date and marked with a green-icon positive solution, so..
    still I try to reopen the issue about an error of "Edge Animate could not find the associated html file"
    for me, this error remains even after opening and saving corresponding html file.
    in fact I don't remember any successful launch of .an file for all my projects
    working at win 7, 64 bit

    ok I shared this via dropbox
    https://www.dropbox.com/sh/gwknsik2j5i4pe0/TB8WGNNLMU

  • Edge Animate could not find the associated html file

    Hey everybody,
    I made several projects using Edge Animate 1.0, all of them worked perfectly. But now I need to make some changes, and several of them are displaying an error saying that could not find the html file associated with the project, even though the file is right at the same folder. I opened the .an file in a text editor and checked that the HTMLFileName attribute is pointing to the correct file. I'm attaching a print screen of the error.
    If anyone has any idea of what is causing it, and how to solve it, it would be greatly appreciated, as I had no luck in anything I tried to do, and need to edit these files as soon as possible.
    Thanks in advance!

    Have somebody found a solution for this?
    I have the same problem with a little added twist.
    The project is located on Creative Cloud.
    .an file opens form one computer and gives this error message while being opened from another.
    This question is being asked by the community for a while with no solution.
    Could somebody from Adobe read this and post the solution?
    Thanks

  • Illustrator CC 2014 won't launch (Could not complete the requested operation) even after fresh install (3 times), anyone know how to solve? (Windows 8.1)

    Hi guys, my Illustrator CC 2014 won't launch, getting an error message "Could not complete the requested operation", this is not a specific file issue I can't launch Illustrator stand alone.  I've un-installed and re-installed about 3 times and contacted support but they haven't been able to solve as of yet.  It's a relatively fresh install of windows 8.1 and no custom fonts have been added.  I've tried deleting the preferences folders and launching and that has not had any effect.  No idea what else I can do, any help would be greatly appreciated.
    Edit: Forgot to mention I have also tried running Illustrator as administrator and that Illustrator was running perfectly fine on this computer since install (about 2 weeks) before this started happening.
    Thanks
    Chris

    Hi Jacob, I decided to completely remove the entire creative suite from my computer, ran the cleaning tool (although some errors showed in the log file) and it now works! Let's just pray it stays this way haha.  Thanks for the suggestion.
    Log File:
    [Thu Mar 05 10:18:58 2015] Choose from one of the following options to clean up :
    [Thu Mar 05 10:18:58 2015] 1.  All
    [Thu Mar 05 10:18:58 2015] 2.  Adobe Flash Player 10.2
    [Thu Mar 05 10:18:58 2015] 3.  Creative Cloud 2014 , Creative Cloud & CS6 Products
    [Thu Mar 05 10:18:58 2015] 4.  Creative Cloud 2014 only
    [Thu Mar 05 10:18:58 2015] 5.  Creative Cloud only
    [Thu Mar 05 10:18:58 2015] 6.  CS6 only
    [Thu Mar 05 10:18:58 2015] 7.  CS5-CS5.5-CS6
    [Thu Mar 05 10:18:58 2015] 8.  CS5-CS5.5
    [Thu Mar 05 10:18:58 2015] 9.  CS3, CS4
    [Thu Mar 05 10:18:58 2015] 10.  Adobe Id credentials
    [Thu Mar 05 10:18:58 2015] 11.  Quit
    [Thu Mar 05 10:18:58 2015] Choice :>
    [Thu Mar 05 10:19:00 2015] User selected: All
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Thu Mar 05 10:19:00 2015] List of products installed on this machine
    [Thu Mar 05 10:19:00 2015] Listing products for cleanup:
    [Thu Mar 05 10:19:00 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
    [Thu Mar 05 10:19:04 2015] Are you sure you want to clean all the listed products and associated files?
    [Thu Mar 05 10:19:04 2015] Type (y) to confirm and remove or (n) to quit ... >>
    [Thu Mar 05 10:19:06 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
    [Thu Mar 05 10:19:06 2015] OSVersion : 64-bit
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:Adobe Creative Cloud
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:AdobeCEPServiceManager
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsManifestBaseURL
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsUpdateCheckInterval
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:LogLevel
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AAM
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.1
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.2
    [Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
    [Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\Users\Public\Desktop\Adobe Creative Cloud.lnk
    [Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Creative Cloud.lnk
    [Thu Mar 05 10:19:06 2015] CoreSync custom hook not found
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Retry deleting the folder since folder still exists
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Some files could not be cleaned up. Please try closing your internet/web browser, and rerun the Cleaner Tool to complete your clean-up.
    [Thu Mar 05 10:19:06 2015] :: Cleaning-up left over inventories ::
    [Thu Mar 05 10:19:06 2015] Inventory: 'AdobeApplicationManager-1.0' Type: SelfUpdate, Action: NoDelete
    [Thu Mar 05 10:19:06 2015] Found AAMref : ACC.aamref
    [Thu Mar 05 10:19:06 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: True
    [Thu Mar 05 10:19:06 2015] Removing content of Product : CS5Installer, Version : CS5
    [Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] LOG FILE SAVED TO: C:\Users\Chris\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
    [Thu Mar 05 10:19:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
    [Thu Mar 05 10:19:07 2015]
    [Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
    [Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
    [Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Thu Mar 05 10:19:07 2015] ---------------------------------------------------------
    [Thu Mar 05 10:19:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
    [Thu Mar 05 10:19:07 2015] ---------------------------------------------------------

  • Msvcr80.dll error- When uninstalling apps, could not get the mobile device support app to uninstall

    MSVCR80.dll error/windows 7/  lost Itunes.  Tried to uninstall applications- Itunes, apple software update, sucessfully but Apple mobile device support would not uninstall so I could not continue uninstalling the rest. 
    Anyone have any ideas??

    Hey dhmacgowan,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • After partition using fdisk, i can not see the new device file (/dev/sdd1)

    I used fdisk -l to partition /dev/sdd, use the entire disk as partition 1. it looks successful:
    # fdisk -l /dev/sdd
    Disk /dev/sdd: 10.7 GB, 10737418240 bytes
    64 heads, 32 sectors/track, 10240 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x35e3e2c4
    Device Boot Start End Blocks Id System
    /dev/sdd1 1 10240 10485744 83 Linux
    the problem: i don't see the device file /dev/sdd1. tried to delete it and partition again, the same.
    also tried
    - mknod b 8 70 /dev/sdd1, to manually create it, but when i use oracleasm createdisk DISK2 /dev/sdd1, the command won't recognize manually crated /dev/sdd1.
    - reboot the server,
    - "partprobe" command, no luck.
    in addition, cat /proc/partitions seems including /dev/sdd1:
    cat /proc/partitions
    major minor #blocks name
    8 16 292935982 sdb
    8 0 143338560 sda
    8 1 512000 sda1
    8 2 142825472 sda2
    252 0 25608192 dm-0
    252 1 25608192 dm-1
    252 2 62423040 dm-2
    252 3 35012608 dm-3
    252 4 20480000 dm-4
    252 5 10240000 dm-5
    252 6 4096000 dm-6
    8 32 10485760 sdc
    8 33 10484736 sdc1
    8 48 20971520 sdd
    8 49 20971504 sdd1
    8 64 10485760 sde
    8 65 10485744 sde1
    any advice?
    Thanks as alwasy!
    Edited by: 943714 on Apr 25, 2013 10:55 AM

    After you create a new partition, always verify it:
    # fdisk -l /path/to/diskOnce that confirms the new partition, you must tell the kernel to re-read the partition table. Several ways to do this, depending on what your storage connection is. This often works:
    # partprobe /path/to/mydiskThen check if the kernel sees the partition:
    # grep /proc/partitions mydiskIf it does, you are done.

Maybe you are looking for