Resume VIDEO downloads after computer disconnect - reboot.

I have Firefox VER 31, OS WINXP 32 Bit, SP2. How do I "Resume VIDEO downloads" after computer disconnects from the internet or freezes and I reboot the computer?

You may not be able to resume downloads if the connection is lost forcefully.
In such a case you would have to backup the .part file and the final file without the .part before starting Firefox.
Try these steps to resume an unfinished download when you still have the .part file.
# Move the old .part partial download and the final file without the .part that has size 0 to another location.
# Start a new download and pause it, don't close Firefox.
# Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created.
# Resume the download in Firefox.
You can consider to use an external download manager if you encounter such issues often.

Similar Messages

  • How to resume movie download after iTunes freeze ?

    how to resume movie download after iTunes freeze ?

    Try the iTunes "Store" menu -> Check for available downloads.
    If it still won't download, go here and fill out the form explaining your problem. Include as much information as possible,

  • Surely developers included a basic feature to resume a download after firefox crashes. How do I activate it?

    Surely the developers put in the basic feature of resuming a download after firefox has crashed from being nonresponsive. Where do I find this feature?

    Firefox should be able to resume an unfinished download, if the server that delivered the download supports resume. In the download window, right-click that partial file and see if the '''Resume''' menu item is available.

  • Flash Player can't resume video stream after 5 mins inactivity

    When viewing streamed videos on a guitar tutorial website, if I pause for 5 minutes or more (to practice) I can't continue playing the video. When I click play it says 'loading' but just stays like that continually, or until the window is refreshed. The site uses real time streaming, not progressive downloading.
    So I guess the connections timed out and been dropped after 5 minutes of inactivity, is this right? If so, has it been dropped by the server or by the player. Can it be configured at either end to stop this, or to lengthen the time before it happens. Thanks, John
    Windows 7 Home Premium, SP1, 32 bit
    Firefox 5.0
    Flash Player WIN 10,3,181,26

    Hi John, If you didn't turn off that hardware acceleration, I certainly would do so. This reverts from GPU rendering back to software rendering. This has been recommended with several of the last versions of Flash Player. Also updating the video card or video card driver to the latest version. That is needed for the hardware acceleration to work.
    Now this link is from Microsoft and it is for IE9. However, the basics discuss GPU/Software rendering and graphics, etc and that would apply to IE, since FP contains this technology.
    It may be on the server end, but I tend to think it's the above due to what's involved.
    Let me know what you find out.
    One other thing that may be overlooked and that is some addon in the browsers. A common one since all browsers are being effected. Certain addons/plugins can conflict with that Shockwave Flash Object that is used by Flash Player. You might take a look and see if there is a common one. You can rule out Microsoft & Adobe and most of Java. Anti-Virus addons would need a close look.
    Thanks,
    eidnolb

  • DownloadHelper only works on youtube video downloads after FireFox upgrade to 32.0

    Firefox upgraded today to 32.0. The add-on DownloadHelper is at 4.9.23. DownloadHelper has worked fine until today. Now it will not offer to download videos from any other sites besides YouTube.

    Hi silverdollar,
    Thank you for your question, please also make sure to ask the addon developer this question. [https://addons.mozilla.org/en-US/firefox/addon/downthemall/developers]
    [https://bugs.downthemall.net/] is the bug section of their site as well you may want to check your preferences for the add on or try it in a new profile to make sure there is not issues with other extensions.

  • To resume download after system is restarted

    i paused a download and switched off my system & when i resumed the download after 1 or 2 days it says c:\Documents and settings\ ....etc could not save the file and i had to restart the download from the beginning. So couldn't i resume the download after 2 or more days ? what may be the problem ? This happens for any type of file download . I'm using windows xp .
    == Operating system ==
    windowsxp

    You may have cleanup software that has removed the file(s) from the temp folder.

  • I am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    i am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    They don't normally appear in the download screen ... until I attempt to download another movie. Then they just start appearing. If you click edit - a normal movie download has a circle that appears on the left hand side that allows you to select and delete ... these movies don't have that option so you need to find the movie in you list (under movies) and select the download cloud symbol again to stop it downloading ...you may need to do this a number of times before it stops for a while ... or until you try to download a movie then it starts all over again.
    i have logged out of my itunes account. restarted the iPad, removed all movies, restarted the iPad, logged back into my iTunes account and restarted my iPad .... but as soon as I tried to download a single movies ... the other movies started appearing in the downloads again.

  • I purchased a new computer and transferred itunes, but can't get the podcasts I downloaded after the transfer to sync to my nano

    I purchased a new computer and transferred itunes to it but now can't get podcasts downloaded after the transfer to sync with device.

    So you have these podcasts downloaded and stored in your iTunes library is that correct?  However, they will not sync with the device?  Are these video or audio podcasts?
    How is your Nano currently configured to sync podcasts?  You can check this by viewing the iPod's Podcasts configuration tab in iTunes.  To view this tab, plug your iPod in and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the Summary tab that now shows to the right.  Look for the Podcasts tab along the top and select it.  Here you can configure how and what Podcasts are synced.
    If you do happen to make any changes from under this tab, be sure to hit the Apply button to sync the updated changes to the Nano.
    B-rock

  • Internet goes stale after computer goes to sleep and then needs to be rebooted to function properly

    I mac with retina 5k display
    internet goes stale after computer goes to sleep and then needs to be rebooted to get it working again
    10.10.1 os

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why the flash player don't work after installing the video downloader add-on?

    I've installed and uninstall the Firefox mobile app several times to try and fix this issue. Every time I add the video downloader add-on the flash player won't let me tap to play videos anymore. I've tried to completely enable the flash but still didn't work. I've used this add on for a few months and it worked fine up until the last Firefox update. Without the add-on the flash player works fine but after I've added the video downloader add-on I would have to uninstall and reinstall the mobile spot to get the flash to work again. I really love to use this add-on that's the advantage that Firefox mobile app has over other web browser. Please tell me how I can fix this issue. THANKS

    Hello FRYDAE
    Welcome to SuMo help Forum,
    Thankyou for reaching us here
    About your problem , have you tried to clear your privacy/browsing data? And see if flash works?
    And you can try to disable the add-on, if you don't want to use it . and enable it again if you want to download a video .
    Cheers!

  • My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected  an external HD that had been on the desktop (i.e. I forgot to eject it  properly), started displaying video anomalies (lines); testing  (TechTool Deluxe 3.1.3) indicates the video is f

    My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
    an external HD that had been on the desktop (i.e. I forgot to eject it
    properly), started displaying video anomalies (lines); testing
    (TechTool Deluxe 3.1.3) indicates the video is failing.
    The graphics card is an ATI Radeon X1600. Is this reasonably
    replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
    PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
    same unit?
    My soldering skills are, sadly, poor.
    And it only dawned on me a couple days ago that because this iMac does
    not have a Core 2 Duo processor, it will not be able to enter the
    "Lion" generation.
    Thanks,
    Patrick
    PS Are manuals for this model available? I have a copy of the Peachpit
    Apple Training Series "Desktop and Portable Systems, Second Edition"
    but it only goes up to the G5 20" iMac. There doesn't appear to be a
    3rd or later edition in the series.

    My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
    an external HD that had been on the desktop (i.e. I forgot to eject it
    properly), started displaying video anomalies (lines); testing
    (TechTool Deluxe 3.1.3) indicates the video is failing.
    The graphics card is an ATI Radeon X1600. Is this reasonably
    replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
    PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
    same unit?
    My soldering skills are, sadly, poor.
    And it only dawned on me a couple days ago that because this iMac does
    not have a Core 2 Duo processor, it will not be able to enter the
    "Lion" generation.
    Thanks,
    Patrick
    PS Are manuals for this model available? I have a copy of the Peachpit
    Apple Training Series "Desktop and Portable Systems, Second Edition"
    but it only goes up to the G5 20" iMac. There doesn't appear to be a
    3rd or later edition in the series.

  • Can I download a free exercise video to my computer (not from Itunes)and then  to my ipod nano, and then show it on my tv, and if so how?

    Can I download a free exercie video (not from Itunes) to my computer, then to my ipod nano, and then show it on my tv?

    If you have a compatible video file, you can add it to your iTunes library by dragging it to the iTunes window, or by using the command
    iTunes menu bar -> File -> Add to Library...
    If the video is in a format that iTunes can play, it should be imported and appear as a new item in the iTunes Movies library.
    It may not be playable on the nano directly, because of its format.  For example, if it's "HD," the resolution is too high for a nano's screen.  If it plays in iTunes, but not on the nano, you can use the command to covert it. Select the item in a list and then
    iTunes menu bar -> File -> Create New Version -> Create iPod or iPhone Version
    That version should play on an iPod nano.  NOTE:  Some videos downloaded from the iTunes Store cannot be converted to a lower resolution format, because they have DRM (copy protection).

  • I DOWNLOADED FIREFOX 10 ON MY WINDOWS 7 COMPUTER I REBOOTED AS TOLD BUT WHEN I TRY TO OPEN FIREFOX IT SAYS IT HAS TO BE REBOOTED; WHEN I TRY TO UNINSTALL IT SAYS IT HAS TO BE REBOOTED OVER AND OVER AGAIN in English

    I DOWNLOADED FIREFOX 10 ON MY WINDOWS 7 COMPUTER I REBOOTED AS TOLD BUT WHEN I TRY TO OPEN FIREFOX IT SAYS IT HAS TO BE REBOOTED; WHEN I TRY TO UNINSTALL IT SAYS IT HAS TO BE REBOOTED OVER AND OVER AGAIN in English

    Exactly what did you do to "try to transfer all of yoru photos" to the iMac?
    LN

  • Is it possible quick second download after buffering the videos

    is it possible quick download after buffering. sometimes download goes too fast within minute after buffering. sometimes not going why?

    I assume you're using an extension to download streaming videos.
    This would be "sped up" by the buffering only if the video is cached. If the video is not cached, it will not be sped up. You can increase your maximum cache size in Tools->Options->Advanced->Network if you want to allow more videos to be cached.

  • I am haveing problem watching video's after downloading adobe flash player

    i am haveing problem watching video's after downloading adobe flash player, how can i make it working?

    Video from where?
    What happens when you try?

Maybe you are looking for

  • Gap in ibase component number by using FM 'CRM_IBASE_COMP_CREATE'

    Hi, i've created a program which creates components for existing IBase from a flat file. For the creation im using the fm 'CRM_IBASE_COMP_CREATE' and it's working fine. The problem right now is, that is have a gap in the component number. For instanc

  • Report call failing from JAVA SDK

    Hi All, I am getting strange issue. Report works fine in BO InfoView when we ran the report by using java SDK it is getting some formula error. Here are the details 1. Report is working fine in DEV, QA and PROD InfoView 2. Report is not working with

  • 10g EE setup for 64-bit OS

    Hi All, I am currently using the below given Oracle Exp. Edition. Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product PL/SQL Release 10.2.0.1.0 - Production "CORE     10.2.0.1.0     Production" TNS for 32-bit Windows: Version 10.2.0.1.0

  • Does lightroom support the Nikon D5300 ...Tether.

    Before I buy lightroom, I'd like to make sure it will tether to a Nikon D5300.  Thanks! 

  • How to stop the keyboard from showing when checkbox is selected

    Whenever a user checks off a checkbox, the keyboard appears. How do I turn off this feature?