Resume

Dear all,
am preparing my resume and planning to get  good job  . So, can u give me some inputs on resume...
1.Can u send me model resumes on SAP MM
2.What are the Roles & Responsibilities in implementation projects. Pl give me 6 or 7 points
3.What are the Roles & Responsibilities in support projects. Pl give me 4 or 5 points
4.Give me a points for preparing a resume as value one.
Can any one send me  resume format to my id [email protected]
Regards,
Renuga.A

Implementation involves different phases
Kindly refer ASAP methodology documents for the clear picture.
Support project involves helping the clients' business operations which would involve.
Fixing up the problem
Implementing the solution to the production server after confirming in Quality server.
Zero defect post implementation
Performace of system maintenance.
There could be some enhancements depending on the clients' requirement
Mention the core MM Topics which you know well is the best value of a CV.

Similar Messages

  • At a Genius Bar appointment yesterday, we determined that I needed to go to Mountain Lion from Lion.  I purchased Mountain Lion at the Bar, and paused the install so that I could resume from home.  Now I can't find it to resume. Not in Downloads. ?????

    When I upgraded to Lion, my Parallels stopped working and I got a Bootcamp error message.  It had worked fine for the prior year.  I upgraded to Parallels 7.  No luck. At the Genius Bar, the Genius uninstalled Bootcamp.  No luck.  I still get "The Boot Camp partition /dev/diskOs4 used by Hard Drive 1 is missing."
    Another Genius suggested upgrading to Mountain Lion.  While at the Bar, I purchased Mountain Lion and then we paused the install so that I could resume it at home.  Once I got home, I can't find the Mountain Lion installer to resume.  It's not in the Downloads file.  Any clue?
    My business programs all run on Windows, so I have to get it operating.  The Genius Bar isn't much help.  Does anyone know how to get Mountain Lion installed?  How to get Parallels working?

    The "Geniuses" (and I use that word in sarcasm) at the Bar are lying to you. Upgrading from Lion to Mt Lion will not fix whatever problems you are having. In fact it will most likely make them worse.
    If you want to try installing Mt Lion to fix the problems you are having you will need to open the Mac App Store link in your Dock, Login to your Apple ID account for the MAS and go to your Purchases area. Mt Lion should be in there and you will be able to do a proper download. Once you either set your Mac into sleep or shut down and then left the internet connection at the Bar all record of that download was lost. So you will need to restart it again from the beginning, like described above.
    Good Luck

  • Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time

    Dear all,
    sorry for opening another thread on this.
    I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
    The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
    And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
    Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
    Is that normal? Is that the performance that everyone else is seeing as well?
    I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
    (1)   
    I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
    (2)   
    The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
    (3)   
    The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
    (4)   
    Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
    (5)   
    There is nothing obvious in the logs.
    (6)   
    We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
    to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
    (7)   
    I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
    (8)   
    I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
    Where do I take it from here?
    I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
    If it is worth watching more performance counters then I’d need to know what to compare them to.
    Is there something else I am missing?
    Thanks
    Martin

    Hi,
    Before considering an additional hardware try to change following configurations for workflow:
    Increase Throttle Size
    Increase Batch Size
    Time Out
    Workflow Timer Interval
    AutoCleanUpDays
    Increase Throttle Size
    The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
    Use below PowerShell command to get the current Throttle Size:
    Get-SPFarmConfig | Select WorkflowPostponeThreshold
    Use below PowerShell command to set new Throttle Size:
    Set-SPFarmConfig -WorkflowPostponeThreshold 100
    Increase Batch Size
    This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
    Use below PowerShell command to get the current Batch Size:
    Get-SPFarmConfig | Select WorkflowBatchSize
    Use below PowerShell command to set new Batch Size:
    Set-SPFarmConfig -WorkflowBatchSize 200
    Time Out
    This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
    Use below STSADM command to get the current Time Out value:
    stsadm -o getproperty -pn workflow-eventdelivery-timeout
    Use below STSADM command to get the current Time Out value:
    stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
    Workflow Timer Interval
    This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
    your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
    Use below STSADM command to get the current Workflow Timer Interval value:
    stsadm -o getproperty -pn job-workflow -url <Web Application Url>
    Use below STSADM command to get the current Workflow Timer Interval value:
    stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
    Here is the url for reference :
    http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

  • Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.

    I have SharePoint 2010 Enterprise running SP1. Configuration is one SharePoint server in the farm and a SQL 2008 R2 database for the backend. Our user environment is 80 users with very little load on the SharePoint server. I have the workflow timer
    set to 1 minute.
    I have a SPD workflow that starts manually on a form library. Whenever I publish a new version of the workflow, the next time I start the workflow it takes the full minute to finish. If I click on the workflow status before it finishes, I see the message
    "Due to heavy load, the latest workflow operation has been queued. It will
    attempt to resume at a later time.". After the minute completes the workflow finishes.
    Here's the weird thing, the next time I start the workflow, it runs in a couple of seconds - almost instantly. I've tried up to 15 times after the inital publishing and everything seems to work fine on initiation.
    Well, that would be fine for me, however, I intermintantly get this heavy load message during task processes that are running inside the workflow. It's probably less than 5% of the time. It's really frustrating though so I appreciate some help. I'm look
    online and haven't found anything that describes my situation.
    Thank you in advance!

    Hi,
    Before considering an additional hardware try to change following configurations for workflow:
    Increase Throttle Size
    Increase Batch Size
    Time Out
    Workflow Timer Interval
    AutoCleanUpDays
    Increase Throttle Size
    The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
    Use below PowerShell command to get the current Throttle Size:
    Get-SPFarmConfig |
    Select WorkflowPostponeThreshold
    Use below PowerShell command to set new Throttle Size:
    Set-SPFarmConfig -WorkflowPostponeThreshold
    100
    Increase Batch Size
    This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
    Use below PowerShell command to get the current Batch Size:
    Get-SPFarmConfig |
    Select WorkflowBatchSize
    Use below PowerShell command to set new Batch Size:
    Set-SPFarmConfig -WorkflowBatchSize
    200
    Time Out
    This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
    Use below STSADM command to get the current Time Out value:
    stsadm -o getproperty -pn workflow-eventdelivery-timeout
    Use below STSADM command to get the current Time Out value:
    stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
    Workflow Timer Interval
    This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
    your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
    Use below STSADM command to get the current Workflow Timer Interval value:
    stsadm -o getproperty -pn job-workflow -url <Web Application Url>
    Use below STSADM command to get the current Workflow Timer Interval value:
    stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
    Here is the url for reference :
    http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
    i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
    maybe there is some module i should load/unload/reload on hibernate/wake-up?
    here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
    xorg.conf
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Cursor" "SendCoreEvents"
    InputDevice "Stylus" "SendCoreEvents"
    InputDevice "Eraser" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Cursor"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "Mode" "Absolute"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "InputDevice"
    Identifier "Stylus"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "TPCButton" "off"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    Option "Mode" "Absolute"
    EndSection
    Section "InputDevice"
    Identifier "Eraser"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "base"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de, ru"
    Option "XkbVariant" "nodeadkeys, winkeys"
    Option "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    Option "FramebufferCompression" "on"
    Option "AccelMethod" "EXA"
    Option "Tiling" "on"
    Option "TrippleBuffer" "true"
    Option "MigrationHeuristic" "greedy"
    Option "RenderAccel" "true"
    Option "ExaNoComposite" "false"
    Option "EnablePageFlip" "true"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "dri"
    Mode 0666
    EndSection
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Xorg.0.log.old
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) UnloadModule: "mouse"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
    (II) intel(0): [drm] Closed DRM master.
    anyone clue?
    Last edited by lynucs (2009-05-09 18:38:01)

    took a look into everything.log.
    that line looks pretty suspicious:
    kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    it occures around the time i did the last resume.
    here is a relevant snippet from everything.log:
    Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:36:00 thinky acpid: 1 client rule loaded
    Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
    Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
    Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
    Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
    Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
    Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
    Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
    Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
    Apr 14 18:43:07 thinky kernel: Back to C!
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
    Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
    Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
    Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
    Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
    Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
    Apr 14 18:43:07 thinky kernel: Call Trace:
    Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
    Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
    Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
    Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
    Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
    Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
    Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
    Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
    Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
    Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
    Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
    Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
    Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
    Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
    Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
    Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
    Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
    Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
    Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
    Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
    Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
    Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
    Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
    Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
    Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Apr 14 18:43:07 thinky kernel: serial 00:09: activated
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1: EH complete
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
    Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
    Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
    Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:43:07 thinky acpid: 1 client rule loaded
    Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
    Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
    Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
    Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: authenticated
    Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
    Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: authenticated
    Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
    Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: authenticated
    Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
    Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
    Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
    Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

  • Laptop screen does not turn on after resume from suspend/hibernate

    I use systemctl suspend/hibernate to resume,  but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
    00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
    00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] tseg: 009ff00000
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    [ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
    [ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
    [ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000023f000000 aka 9200M
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
    [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
    [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
    [ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
    [ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
    [ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
    [ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
    [ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x23effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
    [ 0.000000] On node 0 totalpages: 1960479
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10155 pages used for memmap
    [ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20416 pages used for memmap
    [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    [ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1397.380 MHz processor
    [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
    [ 0.000046] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20141107
    [ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
    [ 0.015021] ACPI: All ACPI Tables successfully acquired
    [ 0.016280] Security Framework initialized
    [ 0.016286] Yama: becoming mindful.
    [ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020472] Initializing cgroup subsys memory
    [ 0.020479] Initializing cgroup subsys devices
    [ 0.020482] Initializing cgroup subsys freezer
    [ 0.020484] Initializing cgroup subsys net_cls
    [ 0.020487] Initializing cgroup subsys blkio
    [ 0.020510] CPU: Physical Processor ID: 0
    [ 0.020511] CPU: Processor Core ID: 0
    [ 0.020513] mce: CPU supports 6 MCE banks
    [ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.021880] ftrace: allocating 21166 entries in 83 pages
    [ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    [ 0.174081] Performance Events: AMD PMU driver.
    [ 0.174086] ... version: 0
    [ 0.174087] ... bit width: 48
    [ 0.174088] ... generic registers: 4
    [ 0.174089] ... value mask: 0000ffffffffffff
    [ 0.174090] ... max period: 00007fffffffffff
    [ 0.174091] ... fixed-purpose events: 0
    [ 0.174092] ... event mask: 000000000000000f
    [ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.197738] x86: Booting SMP configuration:
    [ 0.197744] .... node #0, CPUs: #1 #2 #3
    [ 0.250891] x86: Booted up 1 node, 4 CPUs
    [ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
    [ 0.252264] devtmpfs: initialized
    [ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
    [ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
    [ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
    [ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
    [ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
    [ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
    [ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
    [ 0.258125] pinctrl core: initialized pinctrl subsystem
    [ 0.258173] RTC time: 18:50:52, date: 02/22/15
    [ 0.258343] NET: Registered protocol family 16
    [ 0.270952] cpuidle: using governor ladder
    [ 0.284279] cpuidle: using governor menu
    [ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.284493] ACPI: bus type PCI registered
    [ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.285035] PCI: Using configuration type 1 for base access
    [ 0.299021] ACPI: Added _OSI(Module Device)
    [ 0.299025] ACPI: Added _OSI(Processor Device)
    [ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.831121] ACPI: Interpreter enabled
    [ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
    [ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.831167] ACPI: (supports S0 S3 S4 S5)
    [ 0.831169] ACPI: Using IOAPIC for interrupt routing
    [ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.843782] PCI host bridge to bus 0000:00
    [ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
    [ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
    [ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.844070] pci 0000:00:01.0: supports D1 D2
    [ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.844272] pci 0000:00:01.1: supports D1 D2
    [ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    [ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
    [ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
    [ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
    [ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
    [ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
    [ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
    [ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
    [ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
    [ 0.845242] pci 0000:00:12.2: supports D1 D2
    [ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.845727] pci 0000:00:13.2: supports D1 D2
    [ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
    [ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
    [ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
    [ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
    [ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
    [ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
    [ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
    [ 0.846982] pci 0000:00:15.0: supports D1 D2
    [ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
    [ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
    [ 0.847225] pci 0000:00:15.1: supports D1 D2
    [ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
    [ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
    [ 0.847466] pci 0000:00:15.2: supports D1 D2
    [ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
    [ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.847956] pci 0000:00:16.2: supports D1 D2
    [ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
    [ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.849834] pci 0000:04:00.0: supports D1 D2
    [ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.854860] pci 0000:05:00.0: supports D1 D2
    [ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
    [ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
    [ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.864464] vgaarb: loaded
    [ 0.864466] vgaarb: bridge control possible 0000:00:01.0
    [ 0.864788] PCI: Using ACPI for IRQ routing
    [ 0.874741] PCI: pci_cache_line_size set to 64 bytes
    [ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
    [ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
    [ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
    [ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
    [ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
    [ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
    [ 0.875079] NetLabel: Initializing
    [ 0.875081] NetLabel: domain hash size = 128
    [ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.875101] NetLabel: unlabeled traffic allowed by default
    [ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.877246] Switched to clocksource hpet
    [ 0.884868] pnp: PnP ACPI init
    [ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.886021] system 00:01: [io 0x040b] has been reserved
    [ 0.886025] system 00:01: [io 0x04d6] has been reserved
    [ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.886032] system 00:01: [io 0x0c14] has been reserved
    [ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.886039] system 00:01: [io 0x0c52] has been reserved
    [ 0.886042] system 00:01: [io 0x0c6c] has been reserved
    [ 0.886046] system 00:01: [io 0x0c6f] has been reserved
    [ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
    [ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    [ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
    [ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.887277] pnp: PnP ACPI: found 9 devices
    [ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
    [ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896259] NET: Registered protocol family 2
    [ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.897360] TCP: reno registered
    [ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897618] NET: Registered protocol family 1
    [ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
    [ 1.838171] PCI: CLS 64 bytes, default 64
    [ 1.838242] Unpacking initramfs...
    [ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
    [ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
    [ 1.934495] microcode: CPU0: patch_level=0x03000014
    [ 1.934537] microcode: CPU1: patch_level=0x03000014
    [ 1.934580] microcode: CPU2: patch_level=0x03000014
    [ 1.934625] microcode: CPU3: patch_level=0x03000014
    [ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.934766] LVT offset 0 assigned for vector 0x400
    [ 1.934817] perf: AMD IBS detected (0x000000ff)
    [ 1.934854] Scanning for low memory corruption every 60 seconds
    [ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.935315] Initialise system trusted keyring
    [ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.937285] zpool: loaded
    [ 1.937288] zbud: loaded
    [ 1.937658] VFS: Disk quotas dquot_6.5.2
    [ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.937948] Key type big_key registered
    [ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.938508] io scheduler noop registered
    [ 1.938511] io scheduler deadline registered
    [ 1.938546] io scheduler cfq registered (default)
    [ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    [ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    [ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    [ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    [ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    [ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    [ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
    [ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
    [ 1.939552] vesafb: scrolling: redraw
    [ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
    [ 1.955978] Console: switching to colour frame buffer device 144x54
    [ 1.972261] fb0: VESA VGA frame buffer device
    [ 1.972328] GHES: HEST is not enabled!
    [ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.973720] Linux agpgart interface v0.103
    [ 1.973797] rtc_cmos 00:02: RTC can wake from S4
    [ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.974434] TCP: cubic registered
    [ 1.974593] NET: Registered protocol family 10
    [ 1.975020] NET: Registered protocol family 17
    [ 1.975476] Loading compiled-in X.509 certificates
    [ 1.975502] registered taskstats version 1
    [ 1.976231] Magic number: 3:326:848
    [ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
    [ 1.976444] PM: Hibernation image not present or could not be loaded.
    [ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 1.977027] Write protecting the kernel read-only data: 8192k
    [ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 1.979659] random: systemd urandom read with 1 bits of entropy available
    [ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.980576] systemd[1]: Detected architecture 'x86-64'.
    [ 1.980581] systemd[1]: Running in initial RAM disk.
    [ 1.980590] systemd[1]: Running with unpopulated /etc.
    [ 1.980603] systemd[1]: No hostname configured.
    [ 1.980609] systemd[1]: Set hostname to <localhost>.
    [ 1.980655] systemd[1]: Initializing machine ID from random generator.
    [ 1.996373] systemd[1]: Populated /etc with preset unit settings.
    [ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
    [ 2.003390] systemd[1]: Created slice -.slice.
    [ 2.003412] systemd[1]: Starting -.slice.
    [ 2.005054] systemd[1]: Listening on Journal Audit Socket.
    [ 2.005188] systemd[1]: Created slice system.slice.
    [ 2.005200] systemd[1]: Starting system.slice.
    [ 2.005218] systemd[1]: Reached target Swap.
    [ 2.005226] systemd[1]: Starting Swap.
    [ 2.005288] systemd[1]: Listening on udev Control Socket.
    [ 2.005296] systemd[1]: Starting udev Control Socket.
    [ 2.005312] systemd[1]: Reached target Slices.
    [ 2.005320] systemd[1]: Starting Slices.
    [ 2.005335] systemd[1]: Reached target Local File Systems.
    [ 2.005342] systemd[1]: Starting Local File Systems.
    [ 2.005358] systemd[1]: Reached target Timers.
    [ 2.005366] systemd[1]: Starting Timers.
    [ 2.005398] systemd[1]: Listening on udev Kernel Socket.
    [ 2.005409] systemd[1]: Starting udev Kernel Socket.
    [ 2.005430] systemd[1]: Reached target Paths.
    [ 2.005441] systemd[1]: Starting Paths.
    [ 2.005497] systemd[1]: Listening on Journal Socket.
    [ 2.005510] systemd[1]: Starting Journal Socket.
    [ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
    [ 2.007428] systemd[1]: Starting Journal Service...
    [ 2.007472] systemd[1]: Reached target Sockets.
    [ 2.007494] systemd[1]: Starting Sockets.
    [ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
    [ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.021212] systemd[1]: Started udev Kernel Device Manager.
    [ 2.024169] systemd[1]: Started udev Coldplug all Devices.
    [ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.041719] SCSI subsystem initialized
    [ 2.042505] ACPI: bus type USB registered
    [ 2.042538] usbcore: registered new interface driver usbfs
    [ 2.042552] usbcore: registered new interface driver hub
    [ 2.042588] usbcore: registered new device driver usb
    [ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.045154] systemd[1]: Started Journal Service.
    [ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.045840] ohci-pci: OHCI PCI platform driver
    [ 2.045993] QUIRK: Enable AMD PLL fix
    [ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
    [ 2.046697] ehci-pci: EHCI PCI platform driver
    [ 2.047833] libata version 3.00 loaded.
    [ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.102273] hub 1-0:1.0: USB hub found
    [ 2.102287] hub 1-0:1.0: 5 ports detected
    [ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
    [ 2.159071] hub 2-0:1.0: USB hub found
    [ 2.159085] hub 2-0:1.0: 5 ports detected
    [ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
    [ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
    [ 2.215699] hub 3-0:1.0: USB hub found
    [ 2.215713] hub 3-0:1.0: 4 ports detected
    [ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
    [ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.271523] ehci-pci 0000:00:12.2: debug port 1
    [ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
    [ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.281694] hub 4-0:1.0: USB hub found
    [ 2.281705] hub 4-0:1.0: 5 ports detected
    [ 2.338086] hub 1-0:1.0: USB hub found
    [ 2.338100] hub 1-0:1.0: 5 ports detected
    [ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
    [ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.338596] ehci-pci 0000:00:13.2: debug port 1
    [ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
    [ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.348396] hub 5-0:1.0: USB hub found
    [ 2.348414] hub 5-0:1.0: 5 ports detected
    [ 2.404806] hub 2-0:1.0: USB hub found
    [ 2.404820] hub 2-0:1.0: 5 ports detected
    [ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
    [ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.461571] ehci-pci 0000:00:16.2: debug port 1
    [ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
    [ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.471768] hub 6-0:1.0: USB hub found
    [ 2.471780] hub 6-0:1.0: 4 ports detected
    [ 2.528139] hub 3-0:1.0: USB hub found
    [ 2.528154] hub 3-0:1.0: 4 ports detected
    [ 2.528415] ahci 0000:00:11.0: version 3.0
    [ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 2.529180] scsi host0: ahci
    [ 2.529664] scsi host1: ahci
    [ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
    [ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
    [ 2.530551] scsi host2: pata_atiixp
    [ 2.530815] scsi host3: pata_atiixp
    [ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
    [ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
    [ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
    [ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
    [ 3.017307] ata1.00: configured for UDMA/133
    [ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
    [ 3.019278] ata2.00: configured for UDMA/100
    [ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
    [ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.084075] sda: sda1 sda2 sda3
    [ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 3.528901] XFS (sda1): Mounting V4 Filesystem
    [ 3.710527] XFS (sda1): Ending clean mount
    [ 3.935255] Switched to clocksource tsc
    [ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
    [ 4.799287] random: nonblocking pool is initialized
    [ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
    [ 7.417234] ACPI: acpi_idle registered with cpuidle
    [ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.544509] wmi: Mapper loaded
    [ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 7.626522] acpi device:2b: registered as cooling_device4
    [ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    [ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
    [ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
    [ 7.746486] ACPI: Lid Switch [LID]
    [ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 7.746725] ACPI: Power Button [SLPB]
    [ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.746880] ACPI: Power Button [PWRF]
    [ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.749951] ACPI: AC Adapter [AC0] (on-line)
    [ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 8.061752] [drm] Initialized drm 1.1.0 20060810
    [ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
    [ 8.363138] kvm: Nested Virtualization enabled
    [ 8.363151] kvm: Nested Paging enabled
    [ 8.704039] [drm] radeon kernel modesetting enabled.
    [ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 8.832364] AMD IOMMUv2 functionality not available on this system
    [ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    [ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
    [ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
    [ 9.031523] media: Linux media interface: v0.10
    [ 9.102014] CRAT table not found
    [ 9.102024] Finished initializing topology ret=0
    [ 9.102177] kfd kfd: Initialized module
    [ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
    [ 9.102951] fb: switching to radeondrmfb from VESA VGA
    [ 9.103002] Console: switching to colour dummy device 80x25
    [ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
    [ 9.104059] [drm] register mmio base: 0xFEB00000
    [ 9.104063] [drm] register mmio size: 262144
    [ 9.104144] ATOM BIOS: Toshiba
    [ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.104235] [drm] RAM width 32bits DDR
    [ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
    [ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 9.104394] [TTM] Initializing pool allocator
    [ 9.104407] [TTM] Initializing DMA pool allocator
    [ 9.104455] [drm] radeon: 512M of VRAM memory ready
    [ 9.104459] [drm] radeon: 1024M of GTT memory ready.
    [ 9.104497] [drm] Loading SUMO Microcode
    [ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
    [ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
    [ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 9.170455] Linux video capture interface: v2.00
    [ 9.179293] mousedev: PS/2 mouse device common for all mice
    [ 9.223473] [drm] Internal thermal controller without fan control
    [ 9.223622] [drm] Found smc ucode version: 0x00011200
    [ 9.223730] [drm] radeon: dpm initialized
    [ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 9.282345] radeon 0000:00:01.0: WB enabled
    [ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
    [ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
    [ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 9.283082] [drm] Driver supports precise vblank timestamp query.
    [ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
    [ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
    [ 9.283145] [drm] radeon: irq initialized.
    [ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.298931] rtlwifi: rtlwifi: wireless switch is on
    [ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
    [ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
    [ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
    [ 9.307058] sound hdaudioC0D2: inputs:
    [ 9.307061] sound hdaudioC0D2: Mic=0x18
    [ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
    [ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
    [ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
    [ 9.369840] [drm] UVD initialized successfully.
    [ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
    [ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
    [ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
    [ 9.789309] usbcore: registered new interface driver uvcvideo
    [ 9.789319] USB Video Class driver (1.1.1)
    [ 9.871399] cfg80211: World regulatory domain updated:
    [ 9.871412] cfg80211: DFS Master region: unset
    [ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 9.890507] [drm] ib test on ring 5 succeeded
    [ 9.911771] [drm] radeon atom DIG backlight initialized
    [ 9.911776] [drm] Radeon Display Connectors
    [ 9.911777] [drm] Connector 0:
    [ 9.911779] [drm] VGA-1
    [ 9.911780] [drm] HPD2
    [ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 9.911783] [drm] Encoders:
    [ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
    [ 9.911786] [drm] CRT1: NUTMEG
    [ 9.911787] [drm] Connector 1:
    [ 9.911788] [drm] LVDS-1
    [ 9.911789] [drm] HPD1
    [ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 9.911791] [drm] Encoders:
    [ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
    [ 9.911793] [drm] LCD1: TRAVIS
    [ 9.911794] [drm] Connector 2:
    [ 9.911795] [drm] HDMI-A-1
    [ 9.911796] [drm] HPD5
    [ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 9.911799] [drm] Encoders:
    [ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
    [ 10.016569] [drm] fb mappable at 0xC0478000
    [ 10.016576] [drm] vram apper at 0xC0000000
    [ 10.016578] [drm] size 5787648
    [ 10.016580] [drm] fb depth is 24
    [ 10.016582] [drm] pitch is 6400
    [ 10.016970] fbcon: radeondrmfb (fb0) is primary device
    [ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
    [ 10.143532] Console: switching to colour frame buffer device 200x56
    [ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [ 10.150312] radeon 0000:00:01.0: registered panic notifier
    [ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
    [ 10.194853] cfg80211: Calling CRDA for country: US
    [ 10.231380] cfg80211: Regulatory domain changed to country: US
    [ 10.231393] cfg80211: DFS Master region: FCC
    [ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 10.422003] XFS (sda3): Mounting V5 Filesystem
    [ 10.837256] XFS (sda3): Ending clean mount
    [ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
    [ 11.195453] microcode: CPU0: new patch_level=0x03000027
    [ 11.195496] microcode: CPU1: new patch_level=0x03000027
    [ 11.195601] microcode: CPU2: new patch_level=0x03000027
    [ 11.195693] microcode: CPU3: new patch_level=0x03000027
    [ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
    [ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
    [ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.753012] wlp4s0: authenticated
    [ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
    [ 13.758283] wlp4s0: associated
    [ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
    [ 23.961417] PM: Syncing filesystems ... done.
    [ 24.305227] PM: Preparing system for mem sleep
    [ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 24.311542] PM: Entering mem sleep
    [ 24.311898] Suspending console(s) (use no_console_suspend to debug)
    [ 24.320753] wlp4s0: deauthenticating f

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

  • Did you know when you type in your email in google your behance pdf resume shows up? This is a security breach!

    I typed my email address in Google and my Behance pdf resume shows up with all my information. Did you all know this? This is a security breach in my opinion.
    Message was edited by: Carol Smith

    HI Carol,
    Thanks for writing. It looks like you had selected your work experience to be visible to the public, so this is why it was visible online. Now I see that you have your work experience listed as private (other than what you have on your profile), so this should no longer be the case. Let me know if you're still seeing this searh result and what exact google term you searched for it to come up.
    Thanks, talk to you soon!

  • Update to 10.6.8 - system hang (mouse issue) after resume from sleep

    I am on older
    MacBook Pro3.1
    Intel Core 2 Duo
    2.6GHz
    Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

    Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

  • Downloads resume from zero, not where they left off

    I know this is a tired question, but it STILL HAS NOT BEEN ADDRESSED BY APPLE. Why do interrupted downloads start back at zero instead of picking up where they left off? Is this too difficult of a bug for the iTunes engineers to deal with? Being overseas in a country with very slow internet connections, this is the most irritating issue I've ever dealt with. It's almost impossible to download podcasts because they always get interrupted somehow, then I have to start from scratch every time. Thinking it's time to consider ditching Mac + iTunes for something more reliable....
    Will someone from Apple please explain why downloads do not resume correctly?

    I am having the same problems, and this is driving to distraction, if the internet line for a second runs to zero MB per sec, I get kicked off the download and have to start from the beginning. There must be a way to start where the download stopped.

  • Resume does not work after app close or quit

    My apps do not open where I left off after either closing them or quitting them. The checkbox on System Preferences>General>Close windows when quitting an application is not checked. After reading several articles I have tried toggling it on/off, with and without restarts inbetween, and have checked that none of the ~/Library/Saved Application State are locked. It is as if the apps (e.g. safari, chrome, textedit) are not able to save their state. Strangely if I leave the apps open and shutdown/reboot my computer the open apps carry on as they should do.
    I am new to the Apple world using a week old Mac Mini running a clean install of OS X 10.8.3. I have been using PCs since the DOS days so having used Microsoft for 25 years I am usually fairly savvy at trying to track down help... but all I can find are answers for people trying to turn off Resume - not turn it on. Is there a way to "repair" the resume either via the GUI or terminal.
    Thanks for your patience.
    Nathan.

    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    There's a search box in the toolbar of the window that opens. Enter "talagent" (without the quotes) in that box. Does a process with that name show in the list below?

  • USB ports don't work after resuming from standby with Windows 8 on X230 tablet

    I have just done a clean install of Windows 8 on my X230 tablet.  Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50).  After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files.  I've also installed all the latest Windows 8 updates.
    Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work.  My computer has two USB 3.0 ports and one USB 2.0 ports.  All exhibit the same behavior.  After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized.  After restarting Windows, the USB ports work again... until I resume from standby mode again.
    I hope there is a solution to this issue.  It is very frustrating.

    Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature.  I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager.  Unfortunately, the same symptoms of my problem persisted.
    I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site.  At the bottom of the file it gives a "Summary of Changes".  Under version 2.03 of the BIOS (the version just before version 2.50), it says:
    - (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
    This indicates that Lenovo support was already aware of such issues.  The problem was intended to be fixed in version 2.03 of the BIOS.  However, the issue persists on my machine, even with the latest BIOS.
    Hopefully someone from Lenovo can comment here.

  • Resume not working correctly with MSDN downloads

    Hi
    Windows 8.1 on Surface Pro 2, IE 11.
    I have been trying for days to download an ISO, just over 4GB, from MSDN. My internet connection is iffy and I have been obliged many times (including once when I had reached 99%) to resume the download. Every time I resume, the start percentage drops
    by a considerable margin, though not (which might be more explicable) to 0.
    I am still trying, and have wasted at least 50GB of my broadband allocation.
    This happens both when I press Pause myself and when the internet connection drops.
    Any idea why this is happening? It is absolutely infuriating.
    I have loads of free disk space.
    Thanks
    Mandy

    Hi, via the Download button within MSDN Subscriptions (is there any other way?)
    I did install FTM but it did not activate. I guess it is not supported by IE11. I tried tweaking the agent to IE9 as suggested in another post, FTM still did not activate.
    Direct Download and ordinary download gave identical results.
    The download I want (SQL Server 2008 R2 Standard) doesn't seem to have Akamai download support.
    I've also tried from Firefox, with no better luck.
    I will try consulting MSDN, as you suggest.
    Many thanks
    Mandy

  • How can I grant users the ability to pause/resume printing without a "print operators group" password.

    Greetings,
    We are running 10.8.5 on 30 machines in an active directory environment (graphics lab). The clients are experiencing a persistant error when pausing or resuming print jobs. Each time something is paused, it requires an administrator password to resume the job. Administrators are not always present so designers are locked out of all of the printers until we come in (or remote in) to authenticate.
    I spoke with Apple today and they said they would not support active directory accounts and that the account must be edited by the department that created the account because the restrictions come from the Active Directory account preferences.
    On the other hand, I ALSO read that I can edit this in the CUPS interface or modify it with the terminal command below, locally.
    dseditgroup -o edit -u admin_name -p -a user_name -t user _lpadmin
    "dseditgroup" adds the user_name to a group (in this case, _lpadmin).
    And admin_name is the name of your administrator's account.
    a) Must this be modified on the Active directory account or CAN I modify this on the local machine via CUPS or terminal?
    b) If so, how would I grant users the ability to resume printing without an admin password?
    c) If not, exactly what must be modified in the active Directory account to allow pause/resume without an admin password.
    I have seen a terminal command that adds users to the print operatiors group (Ipadmin) and I have seen some info on editing the CUPS interface, If i must edit the CUPS interface to allow this, can anyone point to detailed instructions on how to make this change.
    I also saw info on editing the CUPS interface but the suggestion lacked details as to how and how to return to default if it does not work.
    I also saw a post with these suggestions below but without detail as to how one would carry this out.
    /etc/cups/cupsd.conf
    # All administration operations require an administrator to authenticate...
    <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    *#Require user @SYSTEM*
    *Require valid-user*
    Order deny,allow
    </Limit>
    # All printer operations require a printer operator to authenticate...
    <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    *#Require user @AUTHKEY(system.print.operator) @admin @lpadmin*
    *Require valid-user*
    Order deny,allow
    </Limit>
    /etc/authorization
    +The system.print.operator key is new to Snow Leopard and seems to control resuming and pausing a printer queue among other things.+
    <key>system.print.admin</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    <key>system.print.operator</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    I have read all posts on this subject and I still am not clear on how to proceed, please assist.
    Thanks in advance,
    V

    Hello again.  For AD environments you can run the following command on each workstation:
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -p -a "Domain Users" -t group _lpadmin
    This command assumes you are typing this interactively on the machine.  Obviously change localadmin to the Mac's local admin's name.  When running you will be prompted for password twice.  Once to elevate permissions (sudo) and once to validate you are localadmin.
    If you are using Apple Remote Desktop (or JAMF or other management suite), you can push this command out while embedding the localadmin's password. 
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -P yourpass -a "Domain Users" -t group _lpadmin
    Please note, if your password uses special characters (/-\) this may fail over ARD.
    In Mavericks, AD groups are cached once they are referenced.  If you are dealing with a lot mobile users (laptops) you might want to replace Domain Users with everyone
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • Touchpad not working after suspend/resume on Asus R409LD

    Hello,
    I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
    However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
    Here is the output of xinput before suspending :
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ USB Camera id=10 [slave keyboard (3)]
    ↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    I tried deactivating and reactivating psmouse but it doesn't work.
    Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
    Here is a full dmseg with suspend/resume if it may help :
    [ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
    [ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
    [ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
    [ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
    [ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
    [ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
    [ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
    [ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
    [ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
    [ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
    [ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
    [ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
    [ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
    [ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
    [ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
    [ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
    [ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
    [ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
    [ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
    [ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
    [ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
    [ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
    [ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
    [ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
    [ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
    [ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
    [ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
    [ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
    [ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
    [ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
    [ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
    [ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
    [ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
    [ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
    [ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
    [ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
    [ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
    [ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
    [ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
    [ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
    [ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
    [ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
    [ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
    [ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
    [ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
    [ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
    [ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
    [ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
    [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
    [ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
    [ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
    [ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
    [ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    [ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
    [ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
    [ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
    [ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
    [ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
    [ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
    [ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
    [ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
    [ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
    [ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
    [ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
    [ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
    [ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
    [ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
    [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
    [ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
    [ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
    [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
    [ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
    [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
    [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
    [ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
    [ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
    [ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
    [ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
    [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
    [ 0.000000] On node 0 totalpages: 1542928
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12838 pages used for memmap
    [ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
    [ 0.000000] Normal zone: 11208 pages used for memmap
    [ 0.000000] Normal zone: 717312 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
    [ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
    [ 0.000000] ACPI: _OSI method disabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] tsc: Detected 2394.353 MHz processor
    [ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
    [ 0.000044] pid_max: default: 32768 minimum: 301
    [ 0.000050] ACPI: Core revision 20150204
    [ 0.034560] ACPI: All ACPI Tables successfully acquired
    [ 0.036629] Security Framework initialized
    [ 0.036636] Yama: becoming mindful.
    [ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.040670] Initializing cgroup subsys blkio
    [ 0.040674] Initializing cgroup subsys memory
    [ 0.040681] Initializing cgroup subsys devices
    [ 0.040684] Initializing cgroup subsys freezer
    [ 0.040686] Initializing cgroup subsys net_cls
    [ 0.040715] CPU: Physical Processor ID: 0
    [ 0.040716] CPU: Processor Core ID: 0
    [ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.041941] mce: CPU supports 7 MCE banks
    [ 0.041957] CPU0: Thermal monitoring enabled (TM1)
    [ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
    [ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.044495] ftrace: allocating 21346 entries in 84 pages
    [ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.089782] TSC deadline timer enabled
    [ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
    [ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.089843] ... version: 3
    [ 0.089844] ... bit width: 48
    [ 0.089845] ... generic registers: 4
    [ 0.089847] ... value mask: 0000ffffffffffff
    [ 0.089848] ... max period: 0000ffffffffffff
    [ 0.089849] ... fixed-purpose events: 3
    [ 0.089850] ... event mask: 000000070000000f
    [ 0.109937] x86: Booting SMP configuration:
    [ 0.109940] .... node #0, CPUs: #1
    [ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
    [ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.129984] #2 #3
    [ 0.165939] x86: Booted up 1 node, 4 CPUs
    [ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
    [ 0.170937] devtmpfs: initialized
    [ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
    [ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
    [ 0.174282] pinctrl core: initialized pinctrl subsystem
    [ 0.174328] RTC time: 14:49:34, date: 03/14/15
    [ 0.174468] NET: Registered protocol family 16
    [ 0.187440] cpuidle: using governor ladder
    [ 0.200788] cpuidle: using governor menu
    [ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.200841] ACPI: bus type PCI registered
    [ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.201048] PCI: Using configuration type 1 for base access
    [ 0.214532] ACPI: Added _OSI(Module Device)
    [ 0.214535] ACPI: Added _OSI(Processor Device)
    [ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.234176] ACPI: Dynamic OEM Table Load:
    [ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.235459] ACPI: Dynamic OEM Table Load:
    [ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.236797] ACPI: Dynamic OEM Table Load:
    [ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.238841] ACPI: Interpreter enabled
    [ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
    [ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
    [ 0.238892] ACPI: (supports S0 S3 S4 S5)
    [ 0.238894] ACPI: Using IOAPIC for interrupt routing
    [ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.240682] ACPI: Power Resource [PC05] (on)
    [ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
    [ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
    [ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.258130] PCI host bridge to bus 0000:00
    [ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
    [ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
    [ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
    [ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
    [ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
    [ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
    [ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
    [ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
    [ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
    [ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
    [ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
    [ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
    [ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
    [ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
    [ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
    [ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
    [ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
    [ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
    [ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.260996] acpiphp: Slot [1] registered
    [ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
    [ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
    [ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
    [ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
    [ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
    [ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
    [ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
    [ 0.271464] pci 0000:03:00.1: supports D1
    [ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
    [ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
    [ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
    [ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
    [ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
    [ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
    [ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.286764] vgaarb: loaded
    [ 0.286765] vgaarb: bridge control possible 0000:00:02.0
    [ 0.286917] PCI: Using ACPI for IRQ routing
    [ 0.288384] PCI: pci_cache_line_size set to 64 bytes
    [ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
    [ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
    [ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
    [ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
    [ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
    [ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
    [ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
    [ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
    [ 0.288579] NetLabel: Initializing
    [ 0.288580] NetLabel: domain hash size = 128
    [ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.288596] NetLabel: unlabeled traffic allowed by default
    [ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.290662] Switched to clocksource hpet
    [ 0.296419] pnp: PnP ACPI init
    [ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.296848] system 00:01: [io 0xffff] has been reserved
    [ 0.296850] system 00:01: [io 0xffff] has been reserved
    [ 0.296852] system 00:01: [io 0xffff] has been reserved
    [ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
    [ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
    [ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
    [ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
    [ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
    [ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
    [ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
    [ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
    [ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
    [ 0.298320] pnp: PnP ACPI: found 10 devices
    [ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
    [ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
    [ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
    [ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
    [ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
    [ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
    [ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
    [ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
    [ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
    [ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
    [ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.305092] NET: Registered protocol family 2
    [ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.305671] TCP: reno registered
    [ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.305779] NET: Registered protocol family 1
    [ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.306077] PCI: CLS 64 bytes, default 64
    [ 0.306126] Unpacking initramfs...
    [ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
    [ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
    [ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.389343] Scanning for low memory corruption every 60 seconds
    [ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.389637] Initialise system trusted keyring
    [ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.391638] zpool: loaded
    [ 0.391641] zbud: loaded
    [ 0.391847] VFS: Disk quotas dquot_6.5.2
    [ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.392076] Key type big_key registered
    [ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.392313] io scheduler noop registered
    [ 0.392316] io scheduler deadline registered
    [ 0.392350] io scheduler cfq registered (default)
    [ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
    [ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.393205] efifb: probing for efifb
    [ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
    [ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 0.393229] efifb: scrolling: redraw
    [ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.396869] Console: switching to colour frame buffer device 170x48
    [ 0.400357] fb0: EFI VGA frame buffer device
    [ 0.400367] intel_idle: MWAIT substates: 0x11142120
    [ 0.400369] intel_idle: v0.4 model 0x45
    [ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.400674] GHES: HEST is not enabled!
    [ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.401281] Linux agpgart interface v0.103
    [ 0.401345] rtc_cmos 00:02: RTC can wake from S4
    [ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.401526] Intel P-state driver initializing.
    [ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.402207] TCP: cubic registered
    [ 0.402436] NET: Registered protocol family 10
    [ 0.402861] NET: Registered protocol family 17
    [ 0.403549] Loading compiled-in X.509 certificates
    [ 0.403578] registered taskstats version 1
    [ 0.404855] Magic number: 7:305:839
    [ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
    [ 0.405254] PM: Hibernation image not present or could not be loaded.
    [ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
    [ 0.405869] Write protecting the kernel read-only data: 8192k
    [ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
    [ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
    [ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.428621] sdhci: Secure Digital Host Controller Interface driver
    [ 0.428624] sdhci: Copyright(c) Pierre Ossman
    [ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.438789] ACPI: bus type USB registered
    [ 0.438822] usbcore: registered new interface driver usbfs
    [ 0.438836] usbcore: registered new interface driver hub
    [ 0.438866] usbcore: registered new device driver usb
    [ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.439732] ehci-pci: EHCI PCI platform driver
    [ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.440689] SCSI subsystem initialized
    [ 0.441807] libata version 3.00 loaded.
    [ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
    [ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.457612] hub 1-0:1.0: USB hub found
    [ 0.457623] hub 1-0:1.0: 2 ports detected
    [ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
    [ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.458152] hub 2-0:1.0: USB hub found
    [ 0.458161] hub 2-0:1.0: 9 ports detected
    [ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.460507] hub 3-0:1.0: USB hub found
    [ 0.460513] hub 3-0:1.0: 4 ports detected
    [ 0.461400] ahci 0000:00:1f.2: version 3.0
    [ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
    [ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
    [ 0.474875] scsi host0: ahci
    [ 0.475020] scsi host1: ahci
    [ 0.475159] scsi host2: ahci
    [ 0.475279] scsi host3: ahci
    [ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
    [ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
    [ 0.475339] ata3: DUMMY
    [ 0.475340] ata4: DUMMY
    [ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
    [ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
    [ 0.797611] ata1.00: configured for UDMA/133
    [ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
    [ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
    [ 0.888974] hub 1-1:1.0: USB hub found
    [ 0.889039] hub 1-1:1.0: 8 ports detected
    [ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
    [ 1.126383] ata2.00: configured for UDMA/100
    [ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
    [ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.149453] sda: sda1 sda2 sda3
    [ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.333146] systemd[1]: Detected architecture 'x86-64'.
    [ 1.333579] systemd[1]: Set hostname to <hal>.
    [ 1.390731] systemd[1]: Starting Login Prompts.
    [ 1.390866] systemd[1]: Reached target Login Prompts.
    [ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.391068] systemd[1]: Expecting device dev-sda1.device...
    [ 1.391131] systemd[1]: Starting Swap.
    [ 1.391189] systemd[1]: Reached target Swap.
    [ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.391251] systemd[1]: Starting Root Slice.
    [ 1.391516] systemd[1]: Created slice Root Slice.
    [ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
    [ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.391676] systemd[1]: Starting Journal Socket.
    [ 1.391774] systemd[1]: Listening on Journal Socket.
    [ 1.391804] systemd[1]: Starting User and Session Slice.
    [ 1.391891] systemd[1]: Created slice User and Session Slice.
    [ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.404539] systemd[1]: Listening on Journal Audit Socket.
    [ 1.404567] systemd[1]: Starting System Slice.
    [ 1.404753] systemd[1]: Created slice System Slice.
    [ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.405256] systemd[1]: Mounting Debug File System...
    [ 1.405704] systemd[1]: Starting Setup Virtual Console...
    [ 1.406206] systemd[1]: Starting Journal Service...
    [ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.407431] systemd[1]: Starting system-getty.slice.
    [ 1.407583] systemd[1]: Created slice system-getty.slice.
    [ 1.407652] systemd[1]: Mounting Huge Pages File System...
    [ 1.408243] systemd[1]: Started File System Check on Root Device.
    [ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 1.408802] systemd[1]: Starting Encrypted Volumes.
    [ 1.408843] systemd[1]: Reached target Encrypted Volumes.
    [ 1.408860] systemd[1]: Starting udev Control Socket.
    [ 1.408920] systemd[1]: Listening on udev Control Socket.
    [ 1.409625] systemd[1]: Mounting Temporary Directory...
    [ 1.410189] systemd[1]: Starting udev Kernel Socket.
    [ 1.410267] systemd[1]: Listening on udev Kernel Socket.
    [ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.411636] systemd[1]: Started Load Kernel Modules.
    [ 1.411663] systemd[1]: Mounted FUSE Control File System.
    [ 1.411711] systemd[1]: Mounting Configuration File System...
    [ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.412517] systemd[1]: Starting Remote File Systems.
    [ 1.412594] systemd[1]: Reached target Remote File Systems.
    [ 1.412633] systemd[1]: Starting Apply Kernel Variables...
    [ 1.413108] systemd[1]: Expecting device dev-sda3.device...
    [ 1.413180] systemd[1]: Starting Slices.
    [ 1.413242] systemd[1]: Reached target Slices.
    [ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.413348] systemd[1]: Starting Paths.
    [ 1.413415] systemd[1]: Reached target Paths.
    [ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.415449] systemd[1]: Started Setup Virtual Console.
    [ 1.417502] systemd[1]: Mounted Configuration File System.
    [ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
    [ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.420243] systemd[1]: Mounted Debug File System.
    [ 1.420980] systemd[1]: Mounted Huge Pages File System.
    [ 1.421670] systemd[1]: Mounted Temporary Directory.
    [ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.431714] systemd[1]: Started Apply Kernel Variables.
    [ 1.432536] systemd[1]: Started udev Coldplug all Devices.
    [ 1.437198] systemd[1]: Starting Load/Save Random Seed...
    [ 1.438791] systemd[1]: Started Rebuild Hardware Database.
    [ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.438844] systemd[1]: Started First Boot Wizard.
    [ 1.438860] systemd[1]: Started Create System Users.
    [ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.443195] systemd[1]: Started Load/Save Random Seed.
    [ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.461282] systemd[1]: Starting Local File Systems (Pre).
    [ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.531924] systemd[1]: Started udev Kernel Device Manager.
    [ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [ 1.561234] ACPI: Lid Switch [LID]
    [ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 1.561324] ACPI: Sleep Button [SLPB]
    [ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.561396] ACPI: Power Button [PWRF]
    [ 1.580408] ACPI: AC Adapter [AC0] (on-line)
    [ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.610817] [drm] Initialized drm 1.1.0 20060810
    [ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.647475] wmi: Mapper loaded
    [ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
    [ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
    [ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
    [ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
    [ 1.677433] sound hdaudioC1D0: inputs:
    [ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
    [ 1.677439] sound hdaudioC1D0: Mic=0x19
    [ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
    [ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
    [ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
    [ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
    [ 1.681093] [drm] Memory usable by graphics device = 2048M
    [ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
    [ 1.681099] fb: switching to inteldrmfb from EFI VGA
    [ 1.681124] Console: switching to colour dummy device 80x25
    [ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 1.681232] [drm] Replacing VGA console driver
    [ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
    [ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
    [ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.701878] [drm] Driver supports precise vblank timestamp query.
    [ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
    [ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
    [ 1.710484] systemd[1]: Mounting /boot...
    [ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
    [ 1.717424] iTCO_vendor_support: vendor-support=0
    [ 1.717576] AVX2 version of gcm_enc/dec engaged.
    [ 1.717578] AES CTR mode by8 optimization enabled
    [ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.718376] media: Linux media interface: v0.10
    [ 1.727078] systemd[1]: Starting Sound Card.
    [ 1.727130] systemd[1]: Reached target Sound Card.
    [ 1.729262] asus_wmi: ASUS WMI generic driver loaded
    [ 1.729427] Linux video capture interface: v2.00
    [ 1.730834] asus_wmi: Initialization: 0x1
    [ 1.730877] asus_wmi: BIOS WMI version: 7.9
    [ 1.730930] asus_wmi: SFUN value: 0x4a0877
    [ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
    [ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
    [ 1.748309] fbcon: inteldrmfb (fb0) is primary device
    [ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
    [ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
    [ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
    [ 1.798396] intel_rapl: Found RAPL domain package
    [ 1.798398] intel_rapl: Found RAPL domain core
    [

    Still no ideas ?

  • Why is it that whenever I download a song from Itunes that a small grey round button appears next to the song (apparently this is the download progress button), but when I press on it to resume, the song disappears. This wasn't happening before.

    Why is it that whenever I download a song from itunes that a small grey button appears next to the song (apparently this is the download progress) but whenever I hit it to resume, the song disappears. I am getting annoyed with having to copy the songs manually onto my phone. Thanks for anyones help. Cheers

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Problem with Office 2013 documents after PC resumes from sleep

    Have a number of PCs in a work environment that exhibit the following error messages when they are woken from a sleep state and the user was working on a Word or PowerPoint document via a network share.
    PowerPoint error: The file you were working with was modified during suspend mode, and the original version is no longer available. <file path and name.ppt> must be re-saved.
    Word error: Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes.
    Having searched the error message I can see that hot fixes were created to fix the issue in Word 2007 and 2010, but nothing seems to relate to Office 2013.
    All the PCs have the latest OS and Office updates.
    I tried the NetworkAvailableTimeInSeconds reg fix from this link - http://support.microsoft.com/kb/2626998/en-gb , and obviously applied it to the Office 2013 key, but to no avail. The additional steps talk about applying the available hot fix, but this
    is not applicable to Office 2013.
    Information:
    All PCs Windows 8.1 Enterprise and Office Professional Plus 2013
    Any help would be appreciated.
    Thank you.

    I have the same issue with 8.1 and Office 2013, and yes, Office is at SP1 (15.0.4631.1002). I've likewise done the Reg fixes suggested for 2007/2010, but still have the issue. Any insight would be appreciated.
    Thanks,
    John

Maybe you are looking for

  • New phone doesn't show all contacts in address book.

    Hi, I just acquired a Blackberry Curve 8310, previous phone is a Razr. I put the sim card into the blackberry, then went to "import contacts from sim card." Upon doing this, some of my contacts showed up, not all of them. Is there a step I missed, am

  • Website reports it does not support FF "beta" ver 4

    ADP Labor Manager online timekeeping tool reports that it does not support FF 4 'beta' -- Error message: You are attempting to access ezLaborManager with the following unsupported browser: Firefox Mozilla/5.0 (Windows NT 6.1; rv:2.0) Gecko/20100101 F

  • Executing a report in background,without selection scr  with a variant

    Dear All, Please let me know whether I can execute a report which doesn't has a selection-screen, in background, <b>using a variant</b> ? Alok.

  • Really urgent LiveCycle/spreadsheet question!

    Really would love to know the answer to this one! I have a new form to create that should be somewhat like a spreadsheet-in fact, the original form it's based off of is laid out like a spreadsheet. Can I just create the new form in LiveCycle Designer

  • The self-installation kit was not delivered!

    I had switch my High speed internet to high speed internet enhanced on May 2nd. They said that the modem would be included. They had activated it on May 5th. They also said that the modem would be at my home 1-2 days before the activation. Today is M