Resuming after an Error in Retail Analytics

Hi,
In RDW, we had options of Bookmarking in every steps of ETL so that if some errors occured, we could resume from the point of error with the help of bookmark.
In RA, C_LOAD_DATES table keeps the record of whether the scenario has already executed or not. But if there are four interfaces in a package and if we got error in the third interface, can we resume from the third interface in RA? If yes, what takes care of this?

hi there
sounds like the dll stores its error status in some kind of static variable. you have to reload the dll to reset this variable. this can only be done by closing all VIs with a call library function node to this dll. if you wrote this dll i'd add a function to reset the internal error state, if it's a third party dll try to find such a function inside the dll or search the manual of the dll if you got one for information about how to reset the error state.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Similar Messages

Loading Old RMS data into Retail Analytics

Hi,
We are implementing Oracle Retail Analytics much after implementation of RMS.
Can some one please tell me that how we can load all the old fact data like sales, inventory, promotion, pricing, on-order etc.
Regards,
Aniket

Hi Anoop,
You can run a Repair full request on the cube.Give the selection condition and do a repair full loading.
Thanks,
Ravi

Slideshow not resuming after certain buttons are used?

Hello,
I have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
I've attached the file and if anyone has any advice at all or can help in any way I would REALLY appreciate it!
Thank you,
William

In looking at the post I just made just now, I notice my attachment didn't come through. I'm not sure why this happened, but here is the code I'm using for the buttons:
btn1.addEventListener(MouseEvent.CLICK, btn1ClickHandler);
function btn1ClickHandler(event:MouseEvent):void
    gotoAndStop(10);
play();
btn2.addEventListener(MouseEvent.CLICK, btn2ClickHandler);
function btn2ClickHandler(event:MouseEvent):void
    gotoAndStop(55);
play();
btn3.addEventListener(MouseEvent.CLICK, btn3ClickHandler);
function btn3ClickHandler(event:MouseEvent):void
    gotoAndStop(105);
play();
btn4.addEventListener(MouseEvent.CLICK, btn4ClickHandler);
function btn4ClickHandler(event:MouseEvent):void
    gotoAndStop(150);
play();
btn5.addEventListener(MouseEvent.CLICK, btn5ClickHandler);
function btn5ClickHandler(event:MouseEvent):void
    gotoAndStop(210);
play();
btn6.addEventListener(MouseEvent.CLICK, btn6ClickHandler);
function btn6ClickHandler(event:MouseEvent):void
    gotoAndStop(259);
play();
And here is the code I'm using for slide images:
link_1.addEventListener(MouseEvent.CLICK, link_1ClickHandler);
function link_1ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=gifts%20worth%20givin g%20can&pricing=cad"));
link_2.addEventListener(MouseEvent.CLICK, link_2ClickHandler);
function link_2ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CU7323&pricing=CAD"));
link_3.addEventListener(MouseEvent.CLICK, link_3ClickHandler);
function link_3ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7292&pricing=CAD"));
link_4.addEventListener(MouseEvent.CLICK, link_4ClickHandler);
function link_4ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.apple.com"));
link_5.addEventListener(MouseEvent.CLICK, link_5ClickHandler);
function link_5ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7306&pricing=CAD"));
link_6.addEventListener(MouseEvent.CLICK, link_6ClickHandler);
function link_6ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=shocking%20deals%20-% 20cl&pricing=cad"));

After Effects error: opening movie - you do not have permission to open this file (-54)

Hi all,
I'm new to after effects. I have just started receiving the following error every time I try to render my movie:
"After Effects error: opening movie - you do not have permission to open this file (-54)".
Yesterday morning, I was able to render movies, however, after I did Apple's latest update I've started receiving the following error. What is happening is that I'm trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I've tried to repair the permissions with disk utility, but that doesn't seem to have helped.
I've searched Google and the Adobe support forums with no luck. Please help.
Thanks in advance for you help,
William

Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
http://discussions.apple.com/thread...347251&tstart=0
Download the right version here:
http://www.apple.com/support/downloads/
Panther: http://www.apple.com/support/downlo...forpanther.html
Tiger: http://www.apple.com/support/downlo...31fortiger.html
Leopard: http://www.apple.com/support/downlo...forleopard.html
Install with Pacifist
http://www.charlessoft.com/
Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store... which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

Unable to restart propagation after archiver error

I am unable to restart oracle streams propagation after archiver error.
05:45:26 [ga016qad10] strmadmin@PMDBQ > select capture_name, state from v$streams_capture;
CAPTURE_NAME STATE
PEGA_CAPTURE PAUSED FOR
FLOW CONT
ROL
I followed the support note 746247.1 but still could not get the propagation started.

SQL> col LOGMINER_ID head 'Log|ID' for 999
SQL> select LOGMINER_ID, CAPTURE_USER, start_scn ncs, to_char(STATUS_CHANGE_TIME,'DD-MM HH24:MI:SS') change_time
2 ,CAPTURE_TYPE,RULE_SET_NAME, negative_rule_set_name , status from dba_capture
3 order by logminer_id
4 /
Log Captured Capture
ID Capture user Start scn CHANGE_TIME Type
Rule set Name Neg rule set Status
61 STRMADMIN 2960358515 21-12 11:50:13 LOCAL
RULESET$_41 ENABLED
81 STRMADMIN 2961530984 21-12 11:50:30 LOCAL
RULESET$_44 ENABLED
SQL> set lines 190
SQL> col rsname format a22 head 'Rule set name'
SQL> col delay_scn head 'Delay|Scanned' justify c
SQL> col delay2 head 'Delay|Enq-Applied' justify c
SQL> col state format a24
SQL> col process_name format a8 head 'Process|Name' justify c
SQL> col LATENCY_SECONDS head 'Lat(s)'
col total_messages_captured head 'total msg|Captured'
SQL> SQL> col total_messages_enqueued head 'total msg|Enqueue'
SQL> col ENQUEUE_MESG_TIME format a17 head 'Row creation|initial time'
SQL> col CAPTURE_TIME head 'Capture at'
SQL> select a.logminer_id , a.CAPTURE_NAME cap, queue_name , AVAILABLE_MESSAGE_NUMBER, CAPTURE_MESSAGE_NUMBER lcs,
2 AVAILABLE_MESSAGE_NUMBER-CAPTURE_MESSAGE_NUMBER delay_scn,
3 last_enqueued_scn , applied_scn las , last_enqueued_scn-applied_scn delay2
4 from dba_capture a, v$streams_capture b where a.capture_name = b.capture_name (+)
5 order by logminer_id
6 ;
SELECT c.logminer_id,
SUBSTR(s.program,INSTR(s.program,'(')+1,4) PROCESS_NAME,
c.sid,
c.serial#,
c.state,
Log Delay Delay
ID CAP QUEUE_NAME AVAILABLE_MESSAGE_NUMBER LCS Scanned LAST_ENQUEUED_SCN LAS Enq-Applied
61 PEGA_CAPTURE QNAMESRC_PEGA 2963657326 2960423611 3233715 2960423611 2960423611 0
81 SACRPT_CAPTURE QNAMESRC_SACRPT 2963657326 2963657325 1 2963650283 2963653132 -2849
SQL> 2 3 4 5 6 to_char(c.capture_time, 'HH24:MI:SS MM/DD/YY') CAPTURE_TIME,
7 to_char(c.enqueue_message_create_time,'HH24:MI:SS MM/DD/YY') ENQUEUE_MESG_TIME ,
8 (SYSDATE-c.capture_message_create_time)*86400 LATENCY_SECONDS,
c.total_messages_captured,
9 10 c.total_messages_enqueued
11 FROM V$STREAMS_CAPTURE c, V$SESSION s
12 WHERE c.SID = s.SID
13 AND c.SERIAL# = s.SERIAL#
14 order by logminer_id ;
-- Archive numbers
Log Process Row creation total msg total msg
ID Name SID SERIAL# STATE Capture at initial time Lat(s) Captured Enqueue
61 C001 173 17930 PAUSED FOR FLOW CONTROL 11:51:12 12/21/10 01:51:54 12/21/10 52037 6000 1
81 C002 159 14604 CAPTURING CHANGES 16:19:08 12/21/10 16:18:45 12/21/10 3 720279 904
SQL> SQL> SQL> SQL>
set linesize 150 pagesize 0 heading on embedded on
SQL> SQL> col name form A55 head 'Name' justify l
SQL> col st form A14 head 'Start' justify l
SQL> col end form A14 head 'End' justify l
SQL> col NEXT_CHANGE# form 9999999999999 head 'Next Change' justify c
SQL> col FIRST_CHANGE# form 9999999999999 head 'First Change' justify c
SQL> col SEQUENCE# form 999999 head 'Logseq' justify c
SQL>
SQL> select thread#, SEQUENCE# , to_char(FIRST_TIME,'MM-DD HH24:MI:SS') st,
2 to_char(next_time,'MM-DD HH24:MI:SS') End,FIRST_CHANGE#,
3 NEXT_CHANGE#, NAME name
4 from ( select thread#, SEQUENCE# , FIRST_TIME, next_time,FIRST_CHANGE#,
5 NEXT_CHANGE#, NAME name
6 from v$archived_log order by first_time desc )
7 where rownum <= 30
8 /
THREAD# Logseq Start End First Change Next Change Name
2 18404 12-21 15:51:07 12-21 16:08:29 2963375604 2963539359 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18404.2
819.738346109
2 18403 12-21 15:35:25 12-21 15:51:07 2963209412 2963375604 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18403.2
815.738345067
1 20546 12-21 15:23:38 12-21 16:08:32 2963082548 2963539801 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20546.4
40.738346113
2 18402 12-21 15:19:26 12-21 15:35:25 2962838112 2963209412 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18402.1
514.738344127
1 20545 12-21 10:23:47 12-21 15:23:38 2962403587 2963082548 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20545.3
180.738343419
2 18401 12-21 06:17:47 12-21 15:19:26 2961823746 2962838112 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18401.3
918.738343167
1 20544 12-21 06:12:01 12-21 10:23:47 2961768331 2962403587 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20544.2
965.738325427
2 18400 12-21 05:27:27 12-21 06:11:59 2961662087 2961763840 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18400.3
68.738310319
2 18399 12-21 04:13:39 12-21 05:27:27 2961296357 2961662087 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18399.2
493.738307647
1 20543 12-21 04:13:39 12-21 06:12:01 2961296354 2961768331 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20543.2
694.738310323
1 20542 12-21 02:38:56 12-21 04:13:39 2960459567 2961296354 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20542.2
409.738303219
2 18398 12-21 02:38:56 12-21 04:13:39 2960459570 2961296357 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18398.1
651.738303219
2 18397 12-21 01:15:15 12-21 02:38:56 2960397220 2960459570 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18397.1
768.738297537
1 20541 12-21 01:15:14 12-21 02:38:56 2960397217 2960459567 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20541.2
690.738297537
2 18396 12-21 01:15:06 12-21 01:15:15 2960397203 2960397220 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18396.9
25.738292515
1 20540 12-21 01:15:05 12-21 01:15:14 2960397201 2960397217 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20540.3
361.738292515
1 20539 12-21 00:41:56 12-21 01:15:05 2960360122 2960397201 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20539.2
245.738292507
2 18395 12-21 00:41:56 12-21 01:15:06 2960360124 2960397203 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18395.2
929.738292507
1 20538 12-21 00:41:47 12-21 00:41:56 2960358572 2960360122 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20538.2
278.738290517
2 18394 12-21 00:41:46 12-21 00:41:56 2960358515 2960360124 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18394.3
474.738290517
2 18393 12-21 00:41:38 12-21 00:41:46 2960358469 2960358515 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18393.3
321.738290507
1 20537 12-21 00:41:38 12-21 00:41:47 2960358458 2960358572 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20537.3
431.738290507
1 20536 12-21 00:12:34 12-21 00:41:38 2960320320 2960358458 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20536.3
128.738290499
2 18392 12-21 00:12:33 12-21 00:41:38 2960319489 2960358469 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18392.3
399.738290499
2 18391 12-20 20:35:05 12-21 00:12:33 2960063680 2960319489 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18391.2
032.738288753
2 18390 12-20 19:04:44 12-20 20:35:05 2959951288 2960063680 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18390.1
771.738275705
1 20535 12-20 15:22:24 12-21 00:12:34 2959770318 2960320320 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20535.3
217.738288755
1 20534 12-20 13:45:57 12-20 15:22:24 2959246604 2959770318 +FLASH/pmdbq/archivelog/2010_12_20/thread_1_seq_20534.3
562.738256945
2 18389 12-20 13:45:54 12-20 19:04:44 2959246478 2959951288 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18389.1
783.738270285
2 18388 12-20 13:42:02 12-20 13:45:54 2959174146 2959246478 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18388.3
249.738251155
30 rows selected.

After Downloading, Error while opening PDF : PDF has no pages

After Downloading, Error while opening PDF : PDF has no pages
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = L_SPOOLNO
      NO_DIALOG                = SPACE
      DST_DEVICE               = MSTR_PRINT_PARMS-PDEST
    IMPORTING
      PDF_BYTECOUNT            = MI_BYTECOUNT
    TABLES
      PDF                      = MTAB_PDF
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 9
Thanks in advance
Monika
      ERR_BTCJOB_SUBMIT_FAILED = 10
      ERR_BTCJOB_CLOSE_FAILED = 11
      OTHERS                   = 12.
Transfer the 132-long strings to 255-long strings
LOOP AT MTAB_PDF.
TRANSLATE MTAB_PDF USING '~'.
CONCATENATE WA_BUFFER MTAB_PDF INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
it_attach = WA_BUFFER.
APPEND it_attach.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
****GET THE FILE NAME TO STORE....................
v_path = 'C:\PD Form\' .
CONCATENATE v_path p_pernr-low '.pdf' into v_name.
    create object v_guiobj.
    call method v_guiobj->file_save_dialog
      EXPORTING
        default_extension = 'pdf'
        default_file_name = v_name
        file_filter       = v_filter
      CHANGING
        filename          = v_name
        path              = v_path
        fullpath          = v_fullpath
        user_action       = v_uact.
    if v_uact = v_guiobj->action_cancel.
      leave to current transaction.
    endif.
..................................DOWNLOAD AS FILE....................
    move v_fullpath to v_filename.
    call function 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = MI_BYTECOUNT
        filename                = v_filename
        filetype                = 'BIN'
      TABLES
        data_tab                = it_ATTACH
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        others                  = 22.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.

My Generated Spool request is PDF Spool. It contains Adobe Forms data. To Download Adobe form
             Spool (PDF Spool) into PDF format,
First,
A)     Read PDF Spool data by using u2018FPCOMP_CREATE_PDF_FROM_SPOOLu2019 Function module.
B)     Assign the Output Data to XSTRING format
C)     Convert that XSTRING data to Binary Format using 'SCMS_XSTRING_TO_BINARY' Function module.
D)     Save File on Application server using OPEN DATASET , TRANSFER , CLOSE DATASET.You can see your
                      downloaded file in Transaction AL11 in specified directory.
You can save your file on Presentation server also using GUI_DOWNLOAD.
First three steps are necessary if your spool is PDF Spool.
Basically we need this when we are downloading Adodbe forms ( which is not a SAPScript or smartforms)
Example :
DATA :
e_pdf1 TYPE fpcontent,
e_renderpagecount1 TYPE i.
CALL FUNCTION 'FPCOMP_CREATE_PDF_FROM_SPOOL'
    EXPORTING
      i_spoolid               = l_spoolno
      i_partnum               = '1'
   IMPORTING
     e_pdf                   = e_pdf1
     e_renderpagecount       = e_renderpagecount1
*   E_PDF_FILE              = E_PDF_FILE1
* EXCEPTIONS
*   ADS_ERROR               = 1
*   USAGE_ERROR             = 2
*   SYSTEM_ERROR            = 3
*   INTERNAL_ERROR          = 4
*   OTHERS                  = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA : buffer TYPE xstring,
append_to_table TYPE c.
DATA : output_length TYPE i.
TYPES : BEGIN OF ty_binary,
            binary_field(1000) TYPE c,
          END OF ty_binary.
DATA : lt_binary TYPE TABLE OF ty_binary WITH HEADER LINE.
DATA : lv_xstring TYPE xstring.
lv_xstring = e_pdf1.
* Convert xstring to binary.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer                = lv_xstring
     append_to_table       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      binary_tab            = lt_binary.
DATA : wa_binary LIKE lt_binary.
DATA: BEGIN OF itab OCCURS 0,
field(256),
END OF itab.
DATA: dsn(50000) VALUE '/usr/sap/tmp/',
length LIKE sy-tabix,
lengthn LIKE sy-tabix.
CONCATENATE '/usr/sap/tmp/' lv_pernr '.pdf' INTO dsn.
******* Save file on Application server
OPEN DATASET dsn FOR OUTPUT IN BINARY MODE.
LOOP AT lt_binary.
    TRANSFER lt_binary-binary_field TO dsn.
ENDLOOP.
CLOSE DATASET dsn.
CLEAR lt_binary.
REFRESH lt_binary.
cheers

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

HT1926 After getting error 7, i un-installed all apple sw and installed iTunes, but when I try to open it, I get the message that the Library cnnt be read because it was created by a newer version of iTunes. What do I do?

After getting error message 7, I un-installed all apple sw and installed iTunes, but it would not open. Received the message that iTunes Library cannot be read as it was created by a newer version of iTunes. What do I do now?

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

After Effects error: crash occurred while invoking effect plug-in "Looks" URGENT!

My name is Tyler and i'm a Mult-Media Editor in training. Just recently meaning just this project i've been getting this error "After Effects error: crash occurred while invoking effect plug-in “Looks”." every time i try to render. If i try to remove the clip where it messes up and replace it with another it will just mess up in another spot.
Screen Shot Here:http://gyazo.com/794429fd1091973c8a296a27d2af6fab.png
Information:
AE: After Effects CS5 (64-bit)
OS: Windows Home Premium (64-bit)
RAM: 8gb
Processor: 1st Gen. i7 Quad-Core
Graphics Card: NVIDIA GeForce GT 320
Updates: Installed All Updated For Adobe Products
Source Footage: Call Of Duty: Modern Warfare 2 @ 60fps using UT Video Codec YUV 420
Worked Before? Yes
Open GL: My open gl is not enabled
I've read other forums and watched tutorials. I've already done the following. (Not in order used)
1. Downgrade Magic Bullet Looks from 1.4.3 to 1.4.2 (Didn't Work)
2. Upgrade Magic Bullet Looks to MBL 2.0 from Magic Bullet Suite 11 (Didn't Work)
3. Uninstall my gfx card and re-install it with the newer version (Didn't Work)
4. Reset AE preferences by pressing alt+shift+ctrl on the shortcut (Didn't Work)
5. Change render settings from H.264 -> .AVI (Didn't Work)
6. I've deleted "AE_OpenGL" from my After Effects folder (Didn't Work)
My Composition:
http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.png
http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.png
The look file is not that complex but i don't know if it'll help but there it is.
Look File Settings:
http://gyazo.com/25346bb318edadc54e09273977964c7d.png
I've never had this problem before and hope that someone has a solution to this problem... if so please post an answer. I don't know if its because i put the plug in on all of my clips and then made an adjustment layer with another Magic Bullet Looks or if it's my clips fault but i just dont know what to do.
-Tyler

It sounds like Looks is only crashing on this project. If that is so then it's most likely a problem with one of your video clips. Either there's a corrupted frame or some other codec glitch that's throwing the errors. I'd suggest replacing footage items with temporary footage. You could even use solids. Replace one at a time, then undo, until you find the footage that's causing the crash. Then either re-compress that footage to another codec or replace it.
If Looks is crashing on every type of footage then you need to pursue other options that are more system related.

After each Error Message,the follwing messages are in Scheduled in ECC SMQ2

Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
Prashanth

Hello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth

Error in Siebel Analytics ReportUI portlet Authentication error.

Hi Everyone
I am trying to Integrate Between Weblogic Portal and OBIEE.
Weblogic Portal Version: 10.3
OBIEE : 11g
Integration Using: Report UI Portlet
1.
While creating OBIEE environment "weblogic" user was setup as "Administrator" account.
Following is list of users that i see from weblogic console for OBIEE.
     User          |     Group
     weblogic     |     Administrator
     BISystemUser|     Administrators
     OracleSystemUser|     OracleSystemGroup
2.
From Portal environment, i have added "sawjsr168portlets.war" as shared library.
Changed portlet.xml and web.xml with following.
     -changes in portlet.xml
          1. oracle.bi.presentation.sawserver.URL
               http://localhost:9704/analytics/saw.dll
          2.     oracle.bi.presentation.portlets.jsr168.reportui.AdminUserName
               weblogic
          3.     oracle.bi.presentation.portlets.jsr168.reportui.AdminPwd
               xxxxxx
          4.     oracle.bi.presentation.report.Path
               /Shared Folders/Sample Lite/Published Reporting/Reports/Brand Revenue Details
     -changes in web.xml
          1.     com.siebel.analytics.web.SAWServer.Host
               localhost
          2.     com.siebel.analytics.web.SAWServer.Port
               9704
3. On Portal Desktop, I am authenticating with "weblogic" user ("weblogic" user which is configured in Portal Domain).
While doing so, I see following exception on Portal Domain.
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:sawsoap="com.siebel.analytics.web/soap/v6"> <soap:Body> <soap:Fault><faultcode>soap:Server</faultcode>
<faultstring>Authentication error. Details: An invalid User Name or Password was entered. </faultstring>
<detail><sawsoape:Error xmlns:sawsoape="com.siebel.analytics.web/soap/error/v1">
<sawsoape:Code>IAI2Z2JJ</sawsoape:Code>
<sawsoape:Message>Authentication error. Details: An invalid User Name or Password was entered. </sawsoape:Message>
<sawsoape:File>main/project/websubsystems/soapservicesimpl.cpp</sawsoape:File>
<sawsoape:Line>183</sawsoape:Line>
<sawsoape:LogSources>
     <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
     <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
     <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>IHVF6OM7</sawsoape:Code>
<sawsoape:Message>Authentication Failure.</sawsoape:Message>
<sawsoape:File>main/project/webconnect/connection.cpp</sawsoape:File>
<sawsoape:Line>387</sawsoape:Line>
<sawsoape:LogSources>
     <sawsoape:LogSource>saw.connectionPool.getConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.securitysubsystem.checkauthentication.runimpl</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
     <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
     <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>OPR4ONWY</sawsoape:Code>
<sawsoape:Message>Odbc driver returned an error (SQLDriverConnectW).</sawsoape:Message>
<sawsoape:File>main/project/webodbcaccess/odbcconnectionimpl.cpp</sawsoape:File>
<sawsoape:Line>356</sawsoape:Line>
<sawsoape:Error>
<sawsoape:Code>U9IM8TAC</sawsoape:Code>
<sawsoape:Message>State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13038] The user does not have impersonation privilege. (08004)</sawsoape:Message>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</detail>
</soap:Fault></soap:Body> </soap:Envelope>>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(exit00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <Exit: HTTPDispatchHandler::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SimpleChain> <BEA-000000> <Exit: SimpleChain::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(semanticCheck00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.handlers.soap.MustUnderstandChecker> <BEA-000000> <Doing SOAP semantic checks...>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.client.AxisClient> <BEA-000000> <Exit: AxisClient::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(toAxisFault00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.enterprise> <BEA-000000> <Mapping Exception to AxisFault
Authentication error. Details: An invalid User Name or Password was entered.
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
<Jan 3, 2011 11:05:05 AM EST> <Error> <ServletContext-/research-portal> <BEA-000000> <Error in Siebel Analytics ReportUI portlet
Authentication error. Details: An invalid User Name or Password was entered.
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers
Kindly let me know your thoughts on following.
1. Am i missing any steps?
2. Is it possible that Portal 10.3 and OBIEE 11g is not compatible?
3. Admin Username and password that i specified in Report UI portlet's preferences, is it wrong user (or user from wrong group maybe)? Do i need to specify user who is from another group?
4. I changed "SAWServer" url and port in web.xml. Is that okay?
5. Is there any way, i can get more detailed information from OBIEE Server by enabling certain kind of debug?
Let me know if any input is needed from my side. Any input is highly appreciated.
Thanks

Hi Now I am facing bellow error.
Can anybody suggest me what to do?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65PState: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 13017] User or group has not been granted the Direct Database Access privilege to access the database 'sh'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000)

I tray to reinstall i tunes in my pc after having error 7, but wyle in the instalation this mesage appear said service apple mobile device failed to star. verefy that you have suficient privileges to star system services.

i tray to reinstall i tunes in my pc after having error 7, but wyle in the instalation this mesage appear said service apple mobile device failed to star. verefy that you have suficient privileges to star system services.

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Resuming after an Error in Retail Analytics

Similar Messages

Maybe you are looking for