Resurrect: Can I use the Key Board Shortcuts to use Commands like "Save"(Ctrl+S), "Refresh"(F5) etc?

Many months ago Simon Jones asked if it was possible to capture screen level key events and redirect them to perform functions in our screens. There was some discussion about having to get into the detail Silverlight events and a statement of the high
level of difficulty.  I would like to resurrect the question and see if anyone in the community has developed a solution to this that could be applied to all screens in a solution.
Regards
Cliff

Simon Jones asked if it was possible to capture screen level key events and redirect them to perform functions in our screens.
I searched relevant thread you mentioned above, but I didn't find sample available. If this feature is important to you, you could submit this feature request:
https://visualstudio.uservoice.com/forums/121579-visual-studio/category/52241-lightswitch
The Visual Studio product team will give positive response about this.
Thanks for your support to Lightswitch Forums.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • When I go into any app that requires me to use the key board I instantly go back to the home page and can't access anything (not even settings)

    When ever I go into an application that requires me to use the key board the app just closes down and takes me back to the home page.  I can't even get into settings.  Also if I bring up the key pad it just sticks after I press a couple of keys?  Help?  I can't get into fb/pages anything!

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How can I drop the key board from my calendar. The normal lower right key stopped working

    How can I drop the key board from my calendar? The normal lower right key stopped working.

    You can install this extension to make it easier to edit userChrome.css:
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    The file needs to have this code:
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
    You can reach the profile folder this way:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

  • I am having trouble.I can't even set my Touch back up. I can type on the key board. I try to touch one key and a bunch go. I don't even have to touch the screen.

    I am having trouble.I can't even set my Touch back up. I can type on the key board. I try to touch one key and a bunch go. I don't even have to touch the screen.

    First make sure the screen is clean,
    The try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (if you can)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem
    Apple Retail Store - Genius Bar

  • Can we filter the Key figure ( by not using Bex Conditions)

    Hello Friends,
    I have a requirement in which I am passing the result of one query "A" to another query "B" ( using replacement path). Also there is a requirement to filter the keyfigure of the query "A"
    Problems I face:
    1) If I use Conditions, it does'nt filter the actual rows from the info cube, but just the query result
    2) Hence when I pass the query result of "A" to query "B", it sends more records which I dont need.
    Question:
    Hence is it possible to filter the keyfigure values at the database level?
    Thanks... Hope some one will guide me.....................

    Hi,
    I've had a similar problem in the past, not specifically for a replacement path but because the number of rows returned by the query was too great to use conditions. In the end what I did was create a characteristic char version of the key figure that was loaded from the same source as the key figure. You then effectively have a key figure that can be filtered in the same way as a normal characteristic.
    Hope this helps.
    Gareth

  • Can I resize the key board while in landscape?

    I know I can rotate the tablet to portrait to make the keyboard smaller but then "everything" is smaller. It would be good to be able to have a smaller text input area and move it.

    Unfortunately no, it's not possible with the stock keyboard. Might be possible with some 3rd party keyboard. Check google play for options.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Is it possible to lock out  the Key Board commands in Keynote?

    Is it possible to lock out your key board actions  in Keynote? This happened all of a sudden. My keyboard has no effect on my trying to change text colors or enter characters. By using the mouse to add text the text box appears but I cannot change the character color.I can change it with the mouse and the new color is displayed but when I type nothing appears as the default color is white and the background is white. I did a copy and paste from a previous slide and I can enter the line to start editing but nothing appears. Nor can I delete anything with the Key board. This is only happening in Keynote. If I use the Key Board to send an email everything works fine. Can type and use the delete button so it seems that the Key Board is fine with other Apps, this is just happening in Keynote. It seems like the Key Board actions are not taking place, it is as if the Key Board is locked out of the Keynote functions.
    Thanks in advance for any help
    Rodger

    Try resetting Keynote as follows:
    remove Keynote version 6.5, you must use an application removal tool for this procedure to work:    Appcleaner is free, I use Appzapper
    empty the trash
    Shut Down the Mac (Apple menu > Shut Down)
    wait 10 seconds, then press the power button
    Immediately after you hear the startup tone, hold down the Shift key, release the Shift key when you see the grey Apple screen
    start up will take a few minutes longer than usual as the Mac is performing a repair routine
    restart the Mac normally, (don’t hold down any keys during startup)
    install Keynote from the Mac App Store

  • TS1702 When using safari as soon as I enter the cursor in the google search box the key board drops down and re-appears and is then usable?

    When using google with Safari as soon as I enter the cursor in the text box the key board drops down, when re-entered it is fine and useable?

    Post a screenshot please. Are those regular Short Answer Question slides or custom quesiton slides? To which master slide did you add the shortcut, because I don't even know which one is used for Short Answer, it is not mentioned in the master slide titles. There is a master slide for Hot Spot, one for Matching, one for Likert and one for MCQ/TF/FIB/Sequence. I suppose the last one is also used for Short Answer but never checked it. Reason is that for short answer I never use the default question slide, because it is so limited for validation: you cannot use 'contain' to check the answer.
    I don't know of any way to have the focus immediately in the Answer Area, sorry
    Lilybiri

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

  • My husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    my husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    Hi...
    Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
    he cant use his key board
    You'll need to use a wired (USB) keyboard.

  • My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??

    My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??

    1. Press the F2 key couple of times.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

    i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

    why can't you use the keyboard the way it is printed?

  • Can i use the key figure total delivery time in days in rows and how is can

    Dear all,
              Can i use the key figure total delivery time in days in rows and how is can.but all the key figures r used in rows but i cannot use in column.i want bothin rows and in column  at a time ,can this is possible,and how.

    Hi,
      yes you can.You will have to use structure in the row.
    Right click on the row and create a new structure.
    In this structure you can add key figure.
    Maximum number of structure a query can have is two
    Please assign points if it helped you.
    Regards,
    Senoy

  • Im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this

    im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this?

    Go to the game's option settings and change the settings to something more to your liking. 

Maybe you are looking for