Retail:Additional articles in IS-Retail
Hi experts,
I just want to know the complete IMG settings and easy access settings to work on "additionals".I just know the article type of additional it is VKHM and i created the article.i added it to another article of type HAWA.I HAWA artilce type i added this additional artilce in additoinal data tab at the top.I want to know the complete IMG settings and Easy access.
Hope foir clear answer from you,
Regards
Sandhya
Hi Sandhya,
Additional Articles never sold (Non Valuated) and always tied with another parent Article. For example, Cloth hangers, shelf talkers so on.
Free items not in the master (whether passed on to customer or not) have to be handled as additional.
Free Goods Receipts have multiplex scenarios. Vendor-initiated Free Goods can further be divided on three sub scenarios:
With Intimation
(1) Prior intimation: In this case it is already known that the vendor is going to provide free goods.
(2) No Intimation: In this case the free item is sent along with regular items without intimation.
Offer Type
(1) Trade Offer: In this kind of offer, the free goods are received from Vendor but are not transferred to Customer. Thus, there is no Parent item u2013 child Item relationship between the Ordered Articles and Free Article.
(2) Consumer Offer: In consumer offers the free goods are transferred to consumer. Thus, there is a Parent item- child item relationship between the ordered item and free item.
Codified
Codified Item: This means that the vendor sends the free goods, which are listed in the item list of store. The free item may be similar (1 Lux free with 1 Lux ) or different to the ordered item (1 Lux free with 1Liril).
Non - Codified Item: This means that the vendor sends the free goods, which are not listed in the item list of store. For incorporation of Non-Codified item in PO or amendment of PO, the free good item is first created as an additional and then incorporated in PO.
Bye,
Muralidhara
Similar Messages
-
Configurable article in sap retail?
Hello Experts,
Can we have configurable articles in sap retail?
Please tell me your opinions..
ThanksTake an example of computer where we have different model of computer lets say
xyz 7000 black
xyz 7000 blue
xyz 7000 white (three variants of xyz 7000 series laptop)
customer can build his laptop from the list of components by having picking different options of hardware such as processor, ram, cds hard drive etc.
Once customer selected the desired components and production order will get generated and the delivery happen to the customer..
the above scenario we want to do it thru article master..(mm41) not thru standard material master.
thanks
MG -
How to check the sales stock of an article in SAP Retail
Hi SAP Leaders,
I just want w how can i check the sales stock of an article in SAP retail.
I have to archive the sales stock of an article. IN WSE1 , it showed the article cannot b be archived as there are open sales stock. HOw can i check the sales stock of an article in SAP Retail and archive it finally.
Regards.
SSHi sumi,
pls check Material Stock ALM_ME_090_CUST_USER and * ACBAPI01 EXIT_SAPLACC4_001 Accounting: ... material master (Retail) * MGV00003 ... Enhancement for article master: IDoc ... Changes in the Workflow Parameters ... 41. PROACT Stock and sales data * ... EXIT_SAPLWPUE_105 Check.
Regards
Sridhar -
How to configure bulk breaking articles in SAP retail
hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg - A
leg pieces - 2.5kg - B
wings - 2.5kg - C
P - 7.5kg - D
Q - 10kg - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenarioPlease have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B -
Follow-Up and Replacement Articles in SAP Retail
Hi everybody,
Iu2019m using SAP Retail and I need to maintain Follow-Up and Replacement Articles.
Iu2019ve created the Follow-Up Categories in the customizing and Iu2019ve assigned replacement article to the original article in transaction WRFFUART.
Does anyone know how the subsequent process works? If I create a Purchase Order or a Sales Order to the original article, does the system automatically replace it by the replacement Article? Iu2019ve tested this but there was no substitution.
Thanks in advance,
SNHi Barbara,
I am analysing the functions for Follow-Up and Replacement Articles in SAP Retail ECC 6.0 Ehp. 3. I created Substitution profiles (SPRO: Logistics u2013 General -> Material Master -> Retail-Specific Settings -> Settings for Follow-Up/Replacement Material -> Maintain Follow-Up Categories) and assigned replacement article to the original article in transaction (WRFFUART). I also activated Substitution Processing and Start Replacement logic in Background (SPRO: Logistics u2013 General -> Substitution Processing -> Activate/Process Substitution Processing).
I tested the process steps you posted (ME21N, VL10B, WSUBST_WORKLIST). There was no automatically substitution after creating the outbound delivery. And the transaction WSUBST_WORKLIST just shows u201CNo data available for selectionu201D.
I analysed the application and found the table WSUBST_WORKLIST. It handles the entries for substitutions. It was empty. When I fill the table manually with data and run the WSUBST_WORKLIST the outbound delivery and the purchase order have a new position with the follow-up article but the original article is still there, unchanged.
Why did the substitution not start automatically in background and why is the original article still in the purchase order and outbound delivery?
It is also interesting, that the material quantity changed. The purchase order includes five units of the original article and the substituted article has a quantity of eight. I guess the reason is a rounding value for procurement.
The ERP 2005 documentation on help.sap.com ([Assigning Follow-Up and Replacement Articles ERP 2005|http://help.sap.com/erp2005_ehp_02/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) describes a conversation factor for the units of measure of the original article and substitution article for each assignment. In the ECC 6.0 documentation ([Assigning Follow-Up and Replacement Articles ECC 6.0|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) this is missing. In the system I also could not find any type of conversation factor for Follow-Up and Replacement Articles.
Is this option not available in ECC 6.0 or where can I find it? -
Unblok Article in IS retail for stores
Hey hi... Will any one help me to unblock an article in IS retail for sale in store
Hi
You can also see Note 378349 - Improvement with discontinuation & assortment list
Regards
Eduardo -
How to Create Merchandise Category Reference Article in IS-Retail system
Hi Experts,
Is there any separate Tcode to create Merchandise Category Reference articles in IS-RETAIL system.
Whether Merchandise Category reference article is created as normal article in MM41 only?
Whether we can assign any of the article that is created in that merchandise category as reference article in WG21 (or) is there any separate Tcode to create Reference articles.
During Retail Implementation projects, how Merchandise Category reference article are handled???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.MHi,
With Tcode WG21 u can create MC ref. article. It is a way to create MC ref article. No need to use MM41.
Regards,
Rahul -
Additional article for free goods- Exclusive Bonus buy
Dear All,
Additional article for free goods in bonus buy
In exclusive free goods, a material different from the orignal material can be specified as the free goods.
Example: A customer who buys 3 pieces of Trouser's, gets 2 pieces of shirt free.
So my question is , how can i add 2 pieces of shirt free if it has different variant (ex: i want to enter Red colour & Green colour article ) in bonus buy, As in Bonus buy we only can enter one line item.
Please help....
Regards
Saurabhin VBG1
1. enter the name of the Article grouping, e.g. Shirt1
2. at tab Article, enter article number(s) and quantity. in your case, enter the variants of the generic article (one for red shirt, one for green shirt, or whatever). enter quantity 1 for both variants.
3. save
when creating the bonus buy,
1. select radio button Article Grouping
2. enter the article Grouping you just created in "Article Grouping" <--- this is the bonus articles, not the preriquisite
please notice that the "FreeGoods" is 1 - inclusive; however, it doesn't matter here.
this is probably different from what you normally do when creating a normal free goods condition in SD. since the prerequisite article is already maintained in the area below. that means the article grouping you just maintained in step 2 is the bonus. as a result, the 2 articles in the article group are bonus articles. -
Handling of Hazardous Articles in SAP Retail
Hi SAP Retail Experts
Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.Dear Pratim
I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
1.) the term "Dangerous Goods" and Hazard substance" is not the same
2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special" mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
C.B: -
Sending Serial numbers of the article to IS RETAIL to POS system
we are doing implementation to an Electronic Retailer. For this retailer we have to maintain <b>serial number</b> in our inventory for each and every article for Goods Receit as well as Goods Issue. Here we are getting Serial Number option at the time of Receiving GRN through MIGO. But we need to send the same serial numbers to POS system through IDOC. After sales we receive the same serial number through inbound IDOC.
For this Process i need information how to send/receive IDOC for this serialised articles. Message Types. If possible T-code if it is having seperate t-code
Regards
Venkat
Ph : 9818362694Hi Venkat
IDOC WPUUMS how much segment you have used for data transfer
There is one enhancement type segment u can use that segment for serial number
segment that u can use E1WXX01
Thanks
Amit Shivhare -
How to manage empties Deposite Article in IS-Retail
Hi Experts,
I have a requirement as follows for deposit articles :
My client is starting a retail business in which he wants to maintain
deposit article like crates which are returnable to vendor.
At the time of buying main<full> article, vendor will provide it in deposit article.
vendor will charge for main as well as deposit article.
Main article will be sold to customer along with deposit article.
Customer will be charged for both. We are using IS-RETAIL with POS system.
Once that customer returns the deposite article, his deposit money will be returned to him.
Deposit article received from customer will be returned to vendor.
I am trying to use emties concept for the same. But as per my understanding empties are treated as free articles in PO.
Kindly help me to figure out the solution for the same.
An explanation with steps vise process to be followed is appreciated.
Thx.....Hi,
I activated empties managment in SPRO. PO is created sucessfully with main article as well as empties.
Goods receipt is also done. But inventory of empties is updated in tied empties location.
Now i am trying to cancel the goods receipt. but system is not allowing me to do so...
It is goving me following error for empties article :
"Combination of movement type 102 (note 306919) and function selected not possible"
I am not able to figure out the problem.....
Kindly help....
Edited by: sagar chorge on Mar 2, 2011 1:16 PM -
IDOC type for Article Master : IS Retail
Hi all,
I am new to ALE/ IDOC and working in a scenario to create article master in SAP from third party application. The client is using IS Retail system with ECC 6.0. Can you please suggest what IDOC type to be used. The IDOC will be sent to SAP system from the third-party application. The IDOC can then be processed to create article master. Is ARTMAS the right message type for it? Somebody also suggested using message type WP_PLU. Can someone please let me know what is the difference between them?
Thanks,
SonikaHello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish -
Discontinuationmof article in IS retail
Hi Sap gurus
Could you please let me how to discintinue a set article from use in IS Retail?
I am not able to discontinue a set article even after doing the following actions.
I have deleted the concerned set article inforecord
Ensured that no set article stock
ensured that all open POs and Sales documents have been closed.
Thanks and regards
Bhanubefore you should delete BOM
mm42 -> basic data -> menu <i>component assignment</i> -> delete BOM (or press BIN icon) -
Retail - Create Article heirarchy
Hi Experts ,
Can someone tell me that is there a bapi to create article heirarchy in IS retail .
The transaction is WMATGRP01 in retail. Please helphI, HOW CAN I CONTACT YOU
-
User exit; Article master SAP Retail for MVKE table?
Is there a user exit in SAP Retail for the MVKE table?
The articles is maintained in a third-party system and are transferred to SAP via Idoc. For sales sets, article category = 10, these requires a item category = ERLA in SAP (MVKE-MTPOS) so that the sales set "explodes" in the sales order.
The third-party system doesn't maintain sales org-spesific data for the articles, therefor we use one ref.article for all article groups. And because sales sets exits in many article groups, we found it difficult to have ref.articles for all of these article groups.
Also the article type is also "normal",so the only way to differentiate the sales sets, are via article category. But since SAP has no link between article category and item category in customizing (as far as I know), I wonder if there is a user-exit to set the item category based on the article category?Hello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish
Maybe you are looking for
-
Need to format month into three characters in SSRS Expression
I am using the following expression to place the month in the heading of a column. =MonthName(Month(DateAdd("M",-1,Now))) The expression above gives me the previous month, but I need to have it as "Jan", not "January". Can someone help me with an exp
-
Anyone know how to change user info in logic pro 9?
Want to know if it is possible to change the user information in logic pro 9...tried all the options in preferences and nothing...any ideas? Running on lion...
-
Error when compile package.
create or replace package body test_data is V_STARTDATE DATE; PROCEDURE CATEGORY_EXPORT aS cursor C1 is select expdate from local_Category_Data loc; end category_us_export; end test_data; gives error "encountered the symbol end when expecting the fol
-
Appropriate use of JProgressBar
/* Is this the correct way of using a JProgressBar, this is my first time using this class. Please give your comments and correct me. By the way, can you tell me when to use this method, addChangeListener(ChangeListener l). Is it possible for me to u
-
IWeb crashes when I try to upload since updates on 11/12/09
I get the following error message when trying to upload my web pages to MobileMe from iWeb: iWeb quit unexpectedly while using the SFWordProcessing plugin. When I go to More Details, I see: Exception Type: EXCBADACCESS (SIGSEGV) Exception Codes: KERN