Retail Box: Correct Number of Discs?

Greetings. My CS5 Design Premium (UPGRADE FROM CS4) for Mac arrived a short while ago. It seems to only have 3 total discs; Creative suite disc, Acrobat 9 installer Disc (is this disc 2?) and then the content disc. Is this correct or is there one missing?
Thank you.
Edit: Just to elaborate, I was under the impression there was 2 separate discs for the creative suite itself (and the installer directions mention multi disc set but i don't know if that refers to the acrobat disc as well), and i just wanted to be sure before i begin an install and have it stuck waiting for a disc 2 that I don't have.
Thanks again in advance for any help.

Adobe should never be referring you to this forum for simple installation questions. You should call back and if you don't get a satisfactory answer, ask for a supervisor. This forum is not Adobe Technical Support and there is no official Adobe monitoring of it.
But FWIW, the disk "Web Premium" is probably what should be used in lieu of "Application Disk 1." The leaflet was unfortunately likely copied and pasted from the one for the Master Collection which indeed does have two application disks.
          - Dov

Similar Messages

  • My mom threw away my box with my install discs my retail snow leopard disc doesn't support mac mini 2010 ethernet.  can apple help me ?

    my mom threw away my box with my install discs my retail snow leopard disc doesn't support mac mini 2010 ethernet.  can apple help me ?  less than 1 month old. 

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

  • I find that I am unable to receive updates.  When I try to re-install, the serial number is not recognized.  I have a retail, boxed, full-version of PS6.

    I find that I am unable to receive updates.  When I try to re-install, the serial number is not recognized.  I have a retail, boxed, full-version of PS6

    Call Apple or an Apple Store in your city and ask them.  Or do a Google search.

  • Hard Drive Replacement - SATA Retail Boxes Marked For PC Not Mac

    I accidentally posted this question in the " Questions about USB/FireWire devices and RAM" so I'm re-posting it here.
    I've checked this forum for messages regarding the upgrade of an iMac G5 hard drive from an 80 GB to a higher capacity drive and the vast majority of the comments say to just purchase ANY SATA drive and pop it in.
    So I visited CompUSA and I noticed that the retail boxes are marked with system requirements that are either PC or PC & Mac. Most of the SATA hard drives indicated specific system requirements of a PC but not a Mac.
    Here's where you guys might be able to help me. I'm looking at purchasing this specific drive
    http://tinyurl.com/jh924
    The drive is a:
    Western Digital Caviar
    SE16
    250 GB
    7200 RPM
    Internal
    SATA-300
    16 MB Cache
    Model # WD2500KSRTL
    The requirements on the box indicate a PC not a Mac.
    One sales person said that a Mac takes any SATA Drive.
    One sales person said SATA drives are different for Macs and PC's.
    Yet another sales person said that the PC requirements are based on loading the software that comes with the SATA drive which is PC based.
    The last sales person said that you need to get a SATA drive that indicates a Mac platform requirement because there are two types of SATA drives.
    And some bystander threw in his two cents worth and said that I should buy any ATA indicated drive.
    So I'm tossing this issue over to you Mac pro's out there.
    Is it true what everyone has been posting that ANY SATA drive would do even though the box indicates a PC platform is required?
    Thanks for the input...

    Thank you Eric and Duane...
    The new drive should be arriving on Thursday and will be complimenting my Lacie Porsche (whatever) 250 GB firewire back up drive.
    Eric was correct regarding the included software for partitioning, migrating data and other disk utility programs. I stopped by another pooter store today and noticed that the majority of the retail drive boxes that indicated a PC platform included various drive utilities geared for a PC.
    I don't understand why the drive manufacturers don't just mark all of the SATA drives as Mac compatible. They can at least increase their market share and revenue by selling SATA's to the 5% of Mac owners out there and with the new dual core chips they'll increase it even more.
    Now if I could only figure out why my Mac won't sleep but shuts off instead...

  • Mac won't let me install retail box version of iWorks09

    Hi
    I was using the 30 day trial period option on iWorks 09. I liked it so bought it (in a retail box from UK Amazon) and intended to install it once my 30 day period had ended.
    That was today - I installed iWorks using the disc and _every time_ I open up any of the applications (Pages, Numbers etc.)I keep getting asked to buy a licence now that my 30 day period has ended. When I open up an Excel sheet, it will not let me make any changes and save it for the same reason.
    How can I persuade the iMac to understand *that I have now purchased the software* and I need to use it?
    I have tried installing it about 6 times now and no luck - it is driving me crazy!

    Welcome to the Apple forums
    It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.

  • I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

    I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

    are you using a window's system?  if yes, which version?
    and, attach a screenshot of your disc's contents.

  • Differences between Download vs Retail Box

    I took the plunge and bought the download version yesterday. The Adobe Store says the CS4 Production Premium download was 19GB on the order page but after purchase, the size of the various files amounts to roughly 8GB. So my question is what does the retail box offer other than install discs and manuals that download doesnt? I know for CS3 we got a video workshop disc compromised of Lynda tutorials but Adobe has not provided an updated site with CS4 videos similar to what was offered in CS3.
    Anyone have any idea?

    No, not the same. The Workshop was an Adobe hosted video portal for the various tutorials for CS3 Products that shipped as a disc as well. It doesnt make any sense why the store says its a 19GB download and what is actually downloaded is only 8GB. There must be some missing content somewhere.

  • Retail Boxed Version of Aperture Question

    Does the retail boxed version of aperture come with printed copies of all the pdf's included electronically (full manula, getting started, image adjustments)? I like having hard copy reference materials and this will factor in on my decision to order an electronic serial number or just get the retail box.

    It does come with a thick instruction manual, some instructional DVD's and a cool printed keyboard shortcut guide on cardstock.
    Can't beat a good 'ole boxed version of software. Reinstallation and digging for serial numbers is much easier with a physical copy. I am done doing online serial #'s and purchases. I'll take the boxed version thank you.

  • If I already own the retail box version of a program can i get it in the app store without paying

    If I already own the retail box version of a program can i get it in the app store without paying extra. for instance if I have Civ V can i utilize the mac app store to download extra content or redownload the game if i lose the disc?

    To swtch to the MAS for an app, wait for the next paid upgrade and if it is available in the MAS, buy it.

  • HP Paviliion dv6-6159tx loss the one recovery disc number 3rd disc

    hello... m using dv6-6159tx recently i loss the one recovery disc number 3rd disc. now how i will get the 3rd recovery disc. I cant purchase the new one. Kindly solve my problem

    Hello LossrecoverCD. I understand that you've misplaced one of your recovery discs and need to get or make some more. Is this correct?
    If these discs came with your notebook and were not created by you you're able to make another copy for yourself. Just follow these instructions. However, you can only create one set of recovery discs. So if you lost one that you created you'll have to speak with HP to get more.
    If you're in the US/Canada call them at 1-800-474-6836. If you're outside of this area use this site to get your region's contact information.
    I hope this is helpful!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Can't open Illustrator file - "does not have the correct number of operands..."

    Right off the bat - Mac, 10.6.8, Illustrator CS4. I've seen different variations of this "...correct number of operands..." error on these boards, with fonts and other things as the culprit, but I haven't come across this specific issue yet. If someone has seen something along these lines please let me know.
    I work for a small design agency that uses Illustrator CS4 on a consistent basis. We have had an ongoing issue where random files that had been working fine will sporadically become corrupt, causing us to have to use the Document Recovery Mode and then edit the file in a text editor to fix the problem which does work for this issue flawlessly, other than the headache of having to do this repeatedly.
    Our workflow is such that we use a local area storage RAID which everyone uses to access the same client files. These client files are all in a series of nested folders we employ to keep all our separate client's work separate. The error arises when certain images are placed into a document, then the document is saved and closed. Upon trying to reopen the file we get an error message like this:
    Where the string "/CR0050_ret.psd" is the filename of the offending image. Basically what has happened is that in the actual code for the document, there is a string that starts as "%%IncludeFile....." which specifies the file's pathway on the local area storage we use. The last segment of that string is the image's filename, which has gotten returned to the next line down, and now the program cannot interpret that line in the code, so it cannot properly open the file. The file will open but only the content that is above the offending IncludeFile string is visible.
    (client information blurred out)
    This does not happen to all the "%%IncludeFile" strings in the document, and does not happen for all images on our local area storage. We know how to fix the problem through the Document Recovery mode and then editing the text. Once we return the filename portion of the code back up to the proper line, and save the file in the text editor, the file will open in Illustrator and show all the information contained within properly. However, if you save the file out again without making any changes, the same errors will propagate throughout the file's code again, and become unreadable prompting another document recovery. Insert endless cycle here.
    What we would like to try and find out is why is this happening, so we can prevent it from happening in the future. Is the image nested too far down in the hierarchy of folders? Are there too many characters in the file pathway string? What can we do to keep this from happening moving forward?
    I know that an easy answer is to copy the files over locally to our hard drives, and work from there, but this is not a very efficient way to work, as we are all collectively working on different files, utilizing common image resources. We like to keep one set of images so there is no duplication that may lead to the wrong image being sent out - "Oh you sent John's version? You should have sent Molly's version of the image for that file"
    We also downloaded the trial version of Illustrator CS6 to see if an upgrade would work wonders, but it does not, the problem persists when saving a recovered file in CS6.
    Any thoughts? Thanks in advance.
    ABK

    In Illustrator it is generally not a good idea to read and write directly to and from a server: http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
    If you really think you need to do it, then check your network thoroughly.

  • Macromedia Dreamweaver activation phone number is no longer active.  What is the correct number?

    Macromedia Dreamweaver activation phone number is no longer active.  What is the correct number?

    Try http://helpx.adobe.com/x-productkb/policy-pricing/activation-help-legacy-macromedia-produc ts.html

  • Alerts not retrieving the correct number of records

    Hi,
    I have created alerts to run plans. These plans are getting records from DB and populating the ADC. The alerts are getting executed but are not retrieving the correct number of records.
    I have created 5 alerts to run 5 plans all in the same time. The error at the "Data Flow service status" window is :
    CACHED RESULT
         REQUEST ID: {4EB6B955-96B3-4AF2-B836-6C9F417D47A6}
         EXECPLAN ID: {11372B4D-9ACE-4CFB-831F-11028FF996D5}
         EXECPLAN NAME: xxxx
         FIX COUNT: 0
         START TIME: 6/8/2006 12:00:01 PM
         EXECUTION TIME: 0:00:00
         Sink Records Blocks Disk Blocks Fix Count Hit Count Execution Status
         0: 0 0 0 0 0
    Complete - ERROR Error while processing the data for the step 'SQL Query'
    This error is seen for 2-3 plans .......
    But if i execute the plan manually from design studio there is no error.
    So
    1. Do i need to change anything in the config files to increase the MAx memory block?
    2. Is there any way, the plans can be run one at a time i.e. configure alerts in such a way that if one plan finishes the other one starts automatically? Currently i have scheduled the plans to run at the same time using Alerts..
    Please help...
    Thanks

    Here is one 'culprit' you can verify. Open DesignStudio. You should "--not--" see any grids or icons on (near) the botton status row. If you see them - right click and delete them. These are plans with same_names put in 'locked' state. After you do this. close your design studio.
    Note- if you ever open a plan in designstudio, always "save" it and close it (exit). Donot click on window [x] mark to close the appl.
    After above verifrication -- restart EnterpriseLink and restart PlanMonitor, verify if everything runs fine.
    --sanjeev                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Filr 1.1 LDAP Preview Not Returning Correct Number of Result

    I'm finishing set up of Filr 1.1 in our environment but noticed today that the LDAP preview does not return the correct number of results. The query:
    (&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
    has been tried against multiple AD domain controllers and has so far returned 3 different user counts - 2895, 2800, and 2700. Mostly it always returns 2800. The correct count using powershell with the exact same ldap filter is over 5000.
    I would prefer not to try a sync until I have some confidence that it will complete successfully. Any suggestions?

    On Wed, 22 Apr 2015 17:26:03 GMT, jameswatson3
    <[email protected]> wrote:
    >
    > I'm finishing set up of Filr 1.1 in our environment but noticed today
    > that the LDAP preview does not return the correct number of results. The
    > query:
    >
    > (&(objectClass=Person)(|(employeeType=E)(employeeT ype=Y)(employeeType=Z)))
    >
    > has been tried against multiple AD domain controllers and has so far
    > returned 3 different user counts - 2895, 2800, and 2700. Mostly it
    > always returns 2800. The correct count using powershell with the exact
    > same ldap filter is over 5000.
    >
    > I would prefer not to try a sync until I have some confidence that it
    > will complete successfully. Any suggestions?
    Could you try it with filr 1.2?
    https://download.novell.com/Download...d=q-mgVFDsOKQ~

  • Query not returning correct number of records

    Hi Guys,
    Can someone please tell me why this query is not retrieving the correct number of records.
    I have a table with six users
    FIRST_NAME          LAST_NAME
    David               Robert
    Martin               Fisher
    Henry               Robert King
    Edmund               Tomkinson
    Williams          Hayes Robert
    Tina               Belkins
    When I run a query, SELECT * FROM USERS WHERE LAST_NAME LIKE 'Robert';
    I only get 1 record back (David Robert). Is the space between the last name
    causing this? If yes, How can I rewite the query?

    show a copy-paste example of your query...
    you need to use a wild card with LIKE, as in
    SQL> create table test
      2  (first_name varchar2(50)
      3  ,last_name varchar2(50)
      4  );
    Table created.
    SQL>
    SQL> insert into test values ('David' , 'Robert'           );
    1 row created.
    SQL> insert into test values ('Martin', 'Fisher'           );
    1 row created.
    SQL> insert into test values ('Henry' , 'Robert King'      );
    1 row created.
    SQL> insert into test values ('Edmund', 'Tomkinson'        );
    1 row created.
    SQL> insert into test values ('Williams',  'Hayes Robert');
    1 row created.
    SQL> insert into test values ('Tina',  'Belkins');
    1 row created.
    SQL>
    SQL> SELECT * FROM test WHERE LAST_NAME LIKE 'Robert';
    FIRST_NAME
    LAST_NAME
    David
    Robert
    SQL>
    SQL> SELECT * FROM test WHERE LAST_NAME LIKE '%Robert%';
    FIRST_NAME
    LAST_NAME
    David
    Robert
    Henry
    Robert King
    Williams
    Hayes Robert

Maybe you are looking for