Retail CS6 install on iMac without optical drive.

Just bought a new iMac and of course it has no optical drive. I also purchased a retail copy of CS6, but it hasn't arrived yet. Can I download CS6 and then just use the product key that comes in the retail box to activate it...or will I have to install the software via an optical drive (which I will also have to purchase)? Thanks.

Lotekschmotek please see http://forums.adobe.com/thread/981369 for information on how to download the software.  Also you can copy the files to a USB drive on a computer which does have an optical drive.  You can then use the USB drive to install the software on the new computer.  You may also want to consider getting an external optical drive in case you have a need to install other software or read other optical media in the future.

Similar Messages

  • Install Windows 7 without optical drive

    Can someone assist please?
    The hard drive went in my x100e however I've received a replacement under warranty.
    I now need to install windows 7 onto it using supplied recovery media (DVD).
    I have an external optical drive however the x100e doesn't recognise it at boot (BIOS is setup correctly and the optical drive works otherwise)..
    I therefore need some other way to install windows 7 onto my new drive. Any suggestions please?
    My other PC only has XP on it so I can't go the diskpart route (that only works with Vista or 7).
    I have an external USB drive - however that contains backups of all my data on it so I can't use that.
    I have a 4Gb USB pendrive however can't find any way to make that bootable with Windows 7 recovery on it.
    Help!
    Thanks,
    Jeddy

    Hello,
    A reply to your question has been posted in the Do any external DVD drives work for boot purposes? message thread.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Installing from discs without optical drive

    I have a new MacBook Pro with no optical drive.  How do I install Photoshop which I purchased elsewhere (and has 5 DVDs)?

    Download the trials from
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Ensure that you follow the Very Important Instructions on that page first otherwise the links will not work.
    When you launch the trials, enter your serial number when prompted to convert them to the licensed version.

  • How can I install Adobe inDesign without optical drive?

    I have Word and a few other programs that are on CD's how can I put them on my MacBook Pro w/ retina display? Do I have to go to the apple store? Or buy that external DVD/CD Drive?

    download the trial version if you can and punch in your serial number when it asks for it....
    did it with my photoshop in my Retina...
    do the same for Ms Office

  • IMac G5 education without optical drive, what can I do?

    I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead. It is very easy to open.
    What was my surprise to see that there was no optical drive...In fact, it could receive one : the slot is there, the IDE cable too, the sloat-loading hole too, but...it is impossible to introduce any CD or DVD because there is a plastic and metallic band all around that makes it impossible....
    As I didn't understand, I made a research on the web anf found out the answer....Incerdible! I didn't know that Apple had made an iMac G5 model for education, without optical drive : from outside, impossible to distinguish it, but when you try to introduce a CD or DVD in the slot, you can't!
    So the only solution is to buy an external firewire drive?
    I tried to see if it was possible to put out the metallic band to free the access for one CD, but it seems impossible! The metallic piece is riveted, or something like that....
    Does anyone has tried something?
    Thanks, I apologize if my english is not very good

    I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead.
    I assume you managed to fix that "motherboard dead" problem, since there would be no point in installing an optical drive in a Mac that does not work.
    If you can't get the slot open because it is intentionally closed, maybe you can get an external optical drive and stick something else into that internal space. For example, will it fit a 2.5-inch (laptop size) IDE hard drive for additional internal storage? Or you can get an IDE-to-compact-flash adapter card and give your iMac a solid state flash drive (like MacBook Air); CF cards are getting pretty cheap, even at the 16GB size, and you can get even larger ones for a higher price. Maybe you can even boot from it.
    Just some ideas...

  • Can I install Windows without optical Driver

    Hi!
    I have a Macbook pro Early 2008 - MB134LL/A but its optical driver cannot read any disc. Now I want to install Windows via BootCamp but it cannot. Anybody know how can I install Windows without optical Driver? I tried to boot by USBflash, USB DVD Driver but it cannot boot.
    I think that does external optical drivers via firewire work?
    Thanks alot!

    Thank you for your reply, and the information.  This is what I came up with:
    I added the strings as instructed, however when I went to sign the script in terminal, I was told:
    /Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
    /Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
    In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
    Also, here are screen captures of the lines that I added.  Mine are the top string entries:
    Thank you for your help, thus far!

  • Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? B

    Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? Buy an external CD drive? Is the answer really "too bad"?

    Acrobat 9 for Mac can be downloaded from
    Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools
    Follow the Very Important Instructions on that page first BEFORE you click the download link.

  • Installation of Master Collection CS3 (disc version for Windows)  on a laptop without optical drive

    Installation of Master Collection CS3 (disc version for Windows) -  is there any possibility of installing my legitimately purchased MC-CS3 on a new laptop without optical drive? Perhaps through a download link or will tranfering all Adobe files from my old to my new computer do the trick as well? Or do I necessarily have to buy an external optical drive? Thank you for answering.

    No need to buy an optical drive and don't try transferring, it rarely works.
    Download the installer from Download CS3 products
    Install then enter your serial number to license it.

  • What external dvd drive is compatible with IMAC with optical drive

    what external drive is compatiblee with IMAC with optical driv

    As far as my experience goes I have had all external dvd drives work throu USB, the USB stands for Universal Seriel Bus and that means the drives are already in the device, so you can probably just go to best buy or to new egg and order a cheap one.
    If you have usb 3.0 I would go with that since its one of the faster ones and you will save money on using a thunder bolt device, and trust me a $17 dvd player works just as good as a $120 dvd player.

  • Install windows on iMac Late 2009 without Optical drive

    Hi, i have an iMac 27 i5 11.1 where i want to install windows 7 (or 8). I already did it 2 years ago without problems, but in the mean time i formatted the drive and my optical drive stopped working so i replaced it with an ssd.
    I'm trying to install windows but i don't know how without a superdrive. I tried with an external usb dvd drive and it didn't work (you can't install windows from a non apple dvd drive, it is a known problem) but it don't work, so i tried to create an usb installation key of windows with microsoft official tool and also with boot camp tool, both doesn't work (when i select them on the boot i get an apple alternated with a prohibition mark and a folder with a question mark, exactly as with the dvd drive). So i thought that maybe if i can install windows on an external drive and boot it from there i will be able to launch the install directly from windows skipping the problem, but you can't install windows on an external drive..
    I'm running out of ideas, someone can help me installing windows on my imac? thanks in advance

    emanuelefromrescaldina wrote:
    Csound1 wrote:
    You can't install Windows on your machine as it stands.
    There is your answer, now stop stressing and move on without it.
    Sure, good answers.
    Apple doesn't want to = You can't
    Apple doesn't let you = You shouldn't
    Too bad i made it. So it is possible, even if you and apple said it's not.
    I installed virtualbox, created a virtual machine with the full disk access, started installing windows, when the copy of the files ended and the vm was rebooting i simply closed it and rebooted my imac and finished the installation directly on the imac, everything went well...
    Luckily i didn't take apple's word as a written law and i use my own brain..
    If you had posted in a Virtual Machine forum, or asked if you could install Windows using other than Bootcamp Assistant then someone would have advised you to use a Virtual Machine like Parallels, Fusion, or VirtualBox. But you posted in the Bootcamp forum so we assumed you wanted to create and use a Bootcamp partition.
    So the answers provided you, based on your questions in this Bootcamp forum were spot on and appropriate.

  • How do I activate previously store bought CS6 Student version on a new computer without optical drive?

    I have a store bought student version of CS6, which I have had on my old computer for the last 2 years. I now bought a new computer without an optical drive and I tried downloading the software from Adobe. When I entered the previously assigned serial number it said "The serial number you entered is invalid. Please try again.  If the problem persists, contact Customer Support"  well....there is no real customer support that I can find, so any help would be appreciated.

    Error "The serial number is not valid for this product" | Creative Suite
    if you can't solve the problem using the above, contact adobe support -
    https://helpx.adobe.com/contact.html

  • How to install OS/reset password without optical drive?

    I was given a white G3 recently, 900 MHz 1 GB of RAM, pretty decent for as old as it is, only problem is that it doesn't have an optical drive. All of the user accounts have passwords and I can't use a disc to do a clean install or reset passwords. Any clue on how to do do anything without a disc? The closest thing I have to an external optical drive is an IDE drive with an IDE to USB adapter, but it doesn't recognize that on boot. I have an external hard drive if I can somehow mount an image on that. Any help would be appreciated. Thanks.

    How to share cd/dvd:
    http://reviews.cnet.com/8301-13727_7-10427176-263.html
    & on the computer with the cd/dvd:
    http://support.apple.com/kb/HT1777?viewlocale=en_US
    Change Password
    Mac OS X:
    Changing or resetting an account password via GUI:
    Resetting a user's password
    Resetting the original administrator account password
    http://docs.info.apple.com/article.html?artnum=106156
    You do not have a CD/DVD
    Changing password from single user mode:
    You can also change the administrator's password from single user mode or create a new administrator account.
    You need to get into single use mode for steps one and two that are listed below.
    This page will tell you how to get into single user mode.
    http://support.apple.com/kb/HT1492
    Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
    1) You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
    # Type the follow two instructions to access the startup disk in read/write:
    /sbin/fsck -fy
    /sbin/mount -uw /
    # Start up some utility processes that are needed.
    sh /etc/rc
    # You will probably need to press the return key once the system stops typing.
    # To find out the users on the system type, use the list command. The l is a lower case L:
    ls /Users
    # One of these accounts will be the administrator.
    # Pick one of the users which I'll call a-user-name and type it in this command:
    passwd a-user-name
    # and enter the new user password. You need six characters.
    # You will need to enter your password twice. Your typing will not show up on the screen just
    # press enter when you complete the typing.
    # For cryptic information on these commands try:
    man ls
    man passwd
    The root account isn't enabled by default. I am not sure if changing the password on root will enable it.
    2) Get the Mac to set up an additional administrative account. You can then change the password on your old account.
    Start with your computer power off. Hold down command-s. Power on your computer.
    Type in the following:
    The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
    # Type the follow two instructions to access the startup disk in read/write. Press return after each command.
    /sbin/fsck -fy
    /sbin/mount -uw /
    cd /var/db
    pwd
    #List all files. The l is a lower case L.
    ls -a
    #The move command acts as a rename command in this format.
    mv -i .applesetupdone .applesetupdone.old
    reboot
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    Limnos adds detailed explainations:
    http://discussions.apple.com/message.jspa?messageID=8441597#8441597
    The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
    http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html
    You will need to scroll down to see this post. Search for applesetupdone
    Once you have a new administrative account, you can change the password of your old administrative account
    blue apple > System Preferences > Accounts
    • You can see that it is easy to change your administrator password. You can set a firmware password that you enter before your machine will boot.
    http://support.apple.com/kb/HT1352
    • For the best data security, you should use FileVault. Create a good logon password. Define and use a good backup plan. I do not recommend using FileVault unless you really need the security because it is much harder to recover your data should you have a hard drive problem and you do not have your data backed up.

  • How do I Install OS 9.2.2 on iMac G3, Optical Drive Not Working

    Okay, this is the issue I have...
    I have an iMac G3 that has a complete blank hard drive in it. How, I formatted it.
    I also have Intel iMac with Snow Leopard and ofcourse, I have OS 9.2.2 CD.
    Trouble is, the optical drive in G3 doesn't work now. Is there a way I can install OS 9.2.2 using my Intel iMac to G3's Harddrive. I don't mind opening the G3 to remove the hard drive.
    I really need help over here and appreciate the suggestions.
    Thanks,

    Help? Here's the situation. I've got a iMac G3 with OS 9.2.2. While trying to reinstall my speech software (blind user) in the system folder, I think I accidentally moved the finder to the trash. Basically the OS ate itself. Panicked, I restarted and it all went to pieces.
    When I tried booting the system, it gives me the start screen like it's loading, and then once loaded, gives me a blank background and blank menu bar atop. A few times the message: Error 10 "Finder" has come up and I'm stuck.
    To make things more interesting, my internal disk drive is no longer there, so I'm using a firewire external drive (Dell, does that matter?) and trying to reinstall the system from the disk.
    While in this process, I've reset the PRAM, I've booted holding down C, nothing changed. I booted holding down Option and got the choice to boot from the firewire drive, but when selected, I got a nice little floppy disk icon with a flashing question mark. The computer then resorted to booting from the half-deleted system, and I'm back to square one.
    Lastly, I booted holding down T, and now I have a blue screen with a big yellow firewire icon bouncing around like a screen saver and I am stumped.
    Please help. My next attempt to reboot will be dropping it from a 10-story building. Thanks in advance!

  • Install without optical drive

    How can I install software without having an optical drive on my MacBook Air?

    If you're talking about the current version, you can download the trial and enter your serial number into that. For older versions, one way would be to copy the contents of your discs to something like a thumb drive and use that instead. If you're near an apple store they'll sometimes let you do this there, using an external disc drive.

  • How to install logic 9 on mbp without optical drive

    I do have Logic installed on my iMac.
    Now I want to install it on MBP that does not have optical drive.
    What are my options?
    Thanks,
    IB

    Four options.. in reverse order of my personal preference/recommendations
    1) Buy an external USB DVD drive from somwhere like Amazon (Their basic range one costs $30)
    2) Borrow an external USB DVD Drive from someone
    3) Use the Remote Disk feature in OS X and install using the DVD drive in your iMac
    See the following link for more info..
    http://support.apple.com/kb/ht5287
    4) Make Disk Images of your DVDs using your iMac and Disk Utility... store them on an ext HD and then install from there onto your MBP
    Personally I'd use #4 because eventually those DVD drives fail (and the DVDs themselves can get scratched etc) so now is the time to make DMGs of your Boxed set for safe keeping in case anything weird happens in the future...

Maybe you are looking for