Retail PO (ME21N) - Make the season category and year visible

There is a tab called "Retail" in the PO transaction ME21N. When I go in the screen designer for this subscreen (SAPLMEGUI - 1322). I see that there are the season fields that I wanted to be displayed.
Unfortunately they are hidden and I don't know how to bring them visible. When I go in the screen layout definition of the PO in SPRO and that I check the field selection NBF (the one that is assigned to our document type) I don't even see the "Retail" tab so I could not change the configuration ? do you know why ???
Thanks

I think Season Category and Season year both are related to Retail and they fall under po item detail Retail tab.
I assume if you make Season field required in spro-mm-purchasing-purchase order-define screen layout at document level foe field selection key NBF (under adminstrative data, item) then your purpose will be solved.

Similar Messages

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I cannot add an e-mail account (Cox) on my iPhone 5S that is in the "Other" category and is a POP account. The phone seems to automatically create the account as IMAP. How to I create a POP account?

I cannot add an e-mail account (Cox communications) on my iPhone 5S that is in the "Other" category and is a POP account. Yhje phone automatically creares the account as IMAP. How do I create a POP account?

This indicates corrupt files.
A restore should resolve.

HT1386 What is "other" in the storage category and how do you reduce that amount?

What is "other" in the storage category and how do you reduce that amount?

A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414

Is there a way to make the tolbars, tabs and icons bigger in Firefox 4?

Is there a way to make the tolbars, tabs and icons bigger in Firefox 4?

Yes right click on a toolbar, the customize option allows ordinary or small icons.
Other options are to look at Operating System settings, or to adjust some of the Firefox preferences, and I also note mention of an add-on https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer
Additionally there are add-ons that change content size.
See also [https://support.mozilla.com/en-US/questions/772884#answer-126017 thread] '' " I would like to make the font sizes on my menu bars, tool bars, and tabs larger. How can I change those font sizes only? " ''
If anyone does change the ''layout.css.devPixelsPerPx'' in Firefox 4 I would be interested in what happens, there is a possible bug as mentioned in [https://support.mozilla.com/en-US/questions/791213 4.0RC1 - Bookmark hover fault]

I want to accumulate rain for the day, month and year; What formula can I use?

I want to accumulate rain for the day, month and year; What formula or expression can I use.
I am using a Rain Wise product that converts pulses to an analog value. The Rain Wise device can be
set to measure up to 1", 5", or 10". I will be setting the unit to 10 inches in increments of 0.01 inches.
What I would like to do is everytime the signal increments I would like to count it as 0.01 then after reaching
a period of time whether it be a day or a month reset back to zero.
Need some advise on this problem.
Solved!
Go to Solution.

Hello Ryan,
Lookout gets a Modbus over Ethernet signal which originates as a 4-20mA input to a Moxa Ethernet I/O Module (E1240) in the field. In Lookout I created a ModbusEthernet Driver and a tag which scales 0 - 65534 RAW to 0-10 Eng. [0 - 10 is inches of rain] Also, another piece of information is that after the rain gauge maxes out at 10 inches it will zero out and start over.
I though the accumulator was time based and took a sample over a specific time period, for instance, one sample every 30 seconds then accumulate. If this is so then if I have 5 inches of rain and then it stopped raining, then 30 seconds latter it would sample, it would see 5 inches and add that to be 10 inches when actually it had only rained 5 inches.
I really need some help with this process,
David Lopez
City of Corpus Christi

DRQ: Isolate the Daily, Monthly and Yearly CheckBoxes in Selection Criteria

Module: Financials => Financial Reports => Accounting => General Ledger
Request to Isolate the Daily, Monthly and Yearly Check Boxes in the General Ledger - Selection Criteria screen, instead of an option in the report window.
Problem: If there is BP/General Ledger having long transaction list, then once user un-check any of the check boxes system takes long time to remove/hide those rows which contains Totals. Which is effecting the performance of the report also. Also those checkboxes appeared with check marked by default.
If user has an option in the selection criteria screen, then they can choose which Total they want before previewing the report and mark accordingly.
Thanks & Regards
Anjan Bhowmick

Being reached to 10 open question, I am forced to close this thread

How can I make the text crisper and less blurry on my MacBook Pro?

I just purchased my first MacBook Pro, and I absolutely love it, save for one potential deal breaker: The text displays blurry. Instead of stark, black on white text, there is a slight halo of grey (or whatever color the font is in) around every character. It makes the text look nice, but much harder to read. The characters are deliberately out of focus. Apparently this is normal, according to this article: http://seattletimes.nwsource.com/html/businesstechnology/2015823073_ptmrsh06.htm l
Is there a way to fix (or work around) this? As a writer, I cannot type for eight hours a day on a computer that "softens" the text. I have tried adjusting my screen resolution (it's at the highest possible) and turning off "font-smoothing" (it's off). Nothing works. I called Apple support and they couldn't help me either. I can't believe there's not an easy fix for this.

Humor me.
Let's revisit the things you did, because they -should- have fixed the problems.
!) to set screen resolution, you MUST use:
System Preferences > Displays ...
Use of the MenuBar item simply shows the last three chosen, not all available.
And what is the screen resolution you are using now? 13" 15" or 17" display? Do you have the default glossy screen or the enhanced matte display?
2) font smoothing.
System Preferences > Appearance.
I see no OFF. I see a checkbox to default to LCD smoothing, and I see "turn off font smoothing for characters smaller than nn point", where nn is 4 to 12.
How do you have these set?

In Firefox 31.0 a bug makes the browser freeze, and then I can't close tabs anymore, what may solve this?

Good afternoon. With the newest update of Firefox for PC (31.0), I have a problem that occurs almost every time I use the browser.
When trying to close a tab, it sometimes cause the browser to freeze during one minute.
Then a dialog-box appears on the screen. It says that the script "chrome://browser/content/tabbrowser.xml:2004" may be busy.
I can choose between two buttons in this dialog-box.
"Continue" which keeps the script running, in theory; though it just closes the dialog-box, makes the browser freeze again, and then the same dialog-box shows up.
"Stop the script" which ends the freeze; but then I'm unable to close tabs (I can still close the browser).
I also noticed that, when the freeze occurs, the content of the tab I tried to close changes to "New Tab".
When I restart the browser, I am able to close tab again, until the freeze shows up again.
The problem started to appear only when I updated Firefox to the 31.0 version (and I didn't add any browser extension in the meanwhile).
Does anyone have an idea of what I could do to avoid the problem? Thank you very much and have a good day!

In the immediate future you can try noscript or flashblock addons to block that script.
However upon more research in searching the current Firefox codebase: [http://dxr.mozilla.org/mozilla-central/search?q=tabbrowser.xml&case=false] it seems to be referenced in there, but I do not see a reference to the port associated. The port is usually used for media. I would not know how to start to troubleshoot this, but are there any consistent steps/webpages that cause this to start?
Does this happen in Safe Mode, please see [[Troubleshoot Firefox issues using Safe Mode]]? And does it happen in a fresh install?

How to make the Page UP and down work on a table control screen?

Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
Vj

Take this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
    WHEN 'P--'.
      CLEAR ok_code.
      PERFORM paging USING 'P--'.
    WHEN 'P-'.
      CLEAR ok_code.
      PERFORM paging USING 'P-'.
    WHEN 'P+'.
      CLEAR ok_code.
      PERFORM paging USING 'P+'.
    WHEN 'P++'.
      CLEAR ok_code.
      PERFORM paging USING 'P++'.
*&      Form PAGING
*       Form to do scrolling for screen XXXX
*      -->CODE   OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
        j TYPE i.
CASE code.
    WHEN 'P--'. <table control name>-top_line = 1.
    WHEN 'P-'.
      <table control name>-top_line =
              <table control name>-top_line - line_count.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
    WHEN 'P+'.
      i = <table control name>-top_line + line_count.
      j = <table control name>-lines - line_count + 1.
      IF j LE 0. j = 1. ENDIF.
      IF i LE j.
        <table control name>-top_line = i.
      ELSE.
        <table control name>-top_line = j.
      ENDIF.
    WHEN 'P++'.
      <table control name>-top_line =
             <table control name>-lines - line_count + 1.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
ENDCASE.
ENDFORM.                               " PAGING
Regards,
Ravi

When I click it makes the sound twice and is weak

Whenever I click essentially it sounds ike one hard click and one weak click, my trackpad when i tap makes a click sound also, when usually it doesnt make a sound.

It will make it easier to help you w/ your problem to know the exact model, size, year built, RAM installed.
If it's an older machine the track pad might be misadjusted. There is an adjustment screw.

How do I make the header, content, and footer transparent in Dreamweaver CS6?

I try setting background color to transparent but it just turns white instead. I want to be able to just see my background image and color and have all content "floating" on my web page.
Also on backgrounds, what is the coding for making sure the background is contained within whatever monitor size it is viewed within or will it automatically scale up/down?
Thanks,
Jennifer

I'm just using a basic Dreamweaver page that has some CSS already in the head (haven't done much work on it yet, just trying to get those things transparent first):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title></title>



<style type="text/css">

</style></head>
<body>
<div class="container">
<div class="header"><a href="#"><img src="" alt="Insert Logo Here" name="Insert_logo" width="180" height="90" id="Insert_logo" style="background-color: #C6D580; display:block;" /></a>
    </div>
<div class="content">
    <h1>Instructions</h1>
    <p>Be aware that the CSS for these layouts is heavily commented. If you do most of your work in Design view, have a peek at the code to get tips on working with the CSS for the fixed layouts. You can remove these comments before you launch your site. To learn more about the techniques used in these CSS Layouts, read this article at Adobe's Developer Center - <a href="http://www.adobe.com/go/adc_css_layouts">http://www.adobe.com/go/adc_css_layouts</a>.</p>
    <h2>Layout</h2>
    <p>Since this is a one-column layout, the .content is not floated. </p>
    <h3>Logo Replacement</h3>
    <p>An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
    <p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
    <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
</div>
<div class="footer">
    <p>© Moving Harmonies - Site Design by <a href="....">JRH Creative</a></p>
    </div>
</div>
</body>
</html>

Is it possible to make the TOC expand and collapse icons larger?

OR to have the TOC expanding and collapsing by usage of a self made buttons?

You can use graphics that are slightly taller, but not wider.
If you go to this page and take a look at the example named Supply Chain Management, you will see that I have used a different TOC expand image that is slightly taller:
http://www.infosemantics.com.au/portfolio
I had originally tried to use a larger image but it appears that Captivate limits the width.
You can use the On Success action of a button to assign the value of the cpCmndTOCVisible system variable to 1 or 0 to open or close the TOC. You can create a toggle action using a Standard or Conditional action to make the same button alternately open or close the TOC each time it is clicked.

HT4623 My phone is not ringing or sms's don't sound yet all the functions are turned on to make the phone ring and the SMS indicate when they are received.

My iphone just won't make a sound when phone calls or SMS's or e-mails are received. The do not distrurb is turned off - what else do i needto do to make it make sounds!!

Use the side controls and make sure your phone is on ringer, up.

How to make the web part and web part zone smaller?

Hello Community
    On WS2012 running SharePoint 2013 Server when you edit a page
the web part zone is big and when you add the web part the web part
is big also.
    So the question is how to you make web parts and web part zone
smaller?
    Thank you
    Shabeaut

Hi,
According to your description, my understanding is that you want to make the web part zone and web part smaller.
When you edit a page, you could change the height and width of the web part in Edit Web Part -> Appearance by typing in the Height and Width field. The size of the web part zone changes with the web part.
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Retail PO (ME21N) - Make the season category and year visible

Similar Messages

Maybe you are looking for