Retail sending articlehirarchy via IDOC - WMATGRP (WMATGRP01) / MATGRP

We would like to send the SAP Retail articel-hiearchy via IDOC WMATGRP from one SAP ERP System to another SAP ERP System.
The problem: We did not found any information about the IDoc inbound proceccing. There is only a document about the "BAPI_WRF_MATGRP_CREATE".
Is it possible to send the SAP Retail article-hiearchy from one to another ERP System via IDoc?
Edited by: Christoph Manschewski on Mar 3, 2008 2:48 PM

Hi Ravi,
Do you mean Merchandise categories of article?
We have another idoc for sending the Merchandise categories and merchandise category hierarchy.
Let me know.
Regards,
Amit

Similar Messages

Error message mes when trying to send PO via IDOCS to another system?

Hi Abap expert,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby

Hi,
Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
Hope this is the error you are getting.
Thanks
Manju

ME23N Error when trying to send PO via IDOCS to another system?

Hello Experts,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>

I just got the same problem. Everything worked fine when i was using message type ORDERS01, but when i changed it to ORDERS05 this problem started happening.
This might solve your problem. If you have it solved out can you tell us the solution you found??
regards,
Diogo

IORD for sending Order via Idocs

Hi SAP Experts,
Does anybody know how to use T-Code IORD for sending Idocs, every time I run this T-Code not a single Idoc gets created.
Also I would like to know what does 'Status Profile/User status to be set' mean on the selection-screen, I think its happening due to this only.
I've done lots of Idoc Integration using HR Idocs but this is a first Idoc Integration for me in PM module so not sure what should be the best way of sending Order via Idocs to 3rd Party system.
Any help would be appreciated.
Thanks,
Sunny Thakur

Hi Pete,
We are trying to send SAP PM Work Order for production equipment changes , I came to know that IORD generates Idocs for Order but somehow whenever we try to run this T-Code all the orders are getting rejected. Also I've noticed Idoc Type IORDER cannot be used for sending Delta changes , is it true? I can't find any entry for this message type in BD60 so makes me think SAP did not design this Idoc type for delta changes, even though I know we could customize it
Do you know what should be the best way of sending SAP PM Work Order to external system , should we create one custom Idoc type?
Let me know in case you could help me out.
Thanks,
Sunny Thakur

T-code ME23N message when trying to send PO via IDOCS to another system?

Hello MM Experts,
I am not sure if my question is more for ABAP guys , but since it is MM related I decided to share it with MM experts as well.
I am getting wired message what I am trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>

Hi Boby ,
TRY going thru this link and check for the details given in it wether they are in place or not specially in the message controls, viz: application EF ,message type NEU and process code ME10
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
regards
kp

FI Invoices correction to send via IDoc vs OSS Note 114814

Hi All,
I would like to send Financial Invoice Corrections via IDoc and I am looking for some guidelines and technical explanation on how I should proceed.
I found some explanations in OSS Note 114814 and on other forum threads but I am kind of confused on what I need to do exactly.
I understood that FM EXIT_SAPLF050_008 is involved in the process and also IDoc type FIDCCP01 and FIDCCP02 but I do not know what need to be enhanced in the FM? Does someone have any coding example?
Where exactly is FM EXIT_SAPLF050_008 being called (TCode)? Is it in FB60? I cannot find the enhancement point in this case.
Do I only have to create a project in CMOD and activate it and that's it? I do not know what I need to do in the function module.
Thank you in advance for your guidance. I am a bit lost here to be honest.
Best regards,
Sylvain

first of all u have to find out the user exit.and then if u need to add fields ,then u can write the code here. and then determine the outbound partner profle using tcode WE20. AND then u can u can assign those things in bd64 bussiness model.and if need filters u can set there.
Regards,
Jampani.

Send Stock & Sales Idoc to Vendors

Hi There,
I need to send an Idoc to Vendor in order to report Stock and Sales, I have found the following transaction:
transaction WVM2 - Transfer Stock and Sales Data
This transaction generates Idoc per plant (PROACT01), the problem that I have is the creation of the partner profile, apparently there is not (Application/Message Type/ Process code) for this process. I would like to know how can I create the partner profile for this process outbound.
Thanks in advance
Regards

hi Alexis,
have a look at this page:
http://help.sap.com/saphelp_45b/helpdata/en/86/37e61cf09b11d18ca1080009d10d9a/content.htm
I used this IDOC 3 years ago and as far as I remember there was nothing special involved
you just need to maintain:
Materials Management -> Purchasing -> Messages -> EDI -> Profile for sending
Stock/Sales Data
and we20
and send it via: RWVMIPAD
you can also have a look at this doc:
http://help.sap.com/bp_retailv1470/Documentation/EN/VMI_EN_CUST_V147.doc
it shows message type and IDOC basis type for outbound proact
is this what you need?
Regards,
michal

Unable to convert sender service for IDoc to SOAP Scenario

Hi,
I tried to find the solution my way and by using the search function but without any success. I have the folowing scenario:
SYS(my sap system) => IDoc => PI (Process Integration) => SOAP => XML
When i send the IDoc to the PI System and open SXI_Moni the folowing error is shown:
"Unable to convert the sender service receiver_service to an ALE logical system"
I read about Adapter Specific Identifies so i go to ID->Service without partner->Business System->MyBusinessSystem(SYS) then in Menü on Services and checked Adapter Specific Identifies. They are like maintained in SLD.
Next is a Cache refresh i tried a full one but no impact
Then i tried a header mapping in receiver agreement. I mapped there the receiver party to the definied receiver party and the receiver_service to the service.
I have no idea
Thanks for help, be sure that helpful answers will be awarded
regards
Matthias
P.S. What causes this error ? For my opinion ALE has already done all neccesary things (The Idoc is in PI System and the data is available in mesaage payload) so why didn't the pi map it and send it via Soap?

Hi Matthias
>>I dont know if its helpful but in SLD are only the system of our landscape so i have no entry for the external Party.
Party information is generally not required to be maintained in SLD
>>Adapter Specific Identifies
What is the value you have given for sender Business system->adapter specific identifier. Is it the same as the partner profile name in sender SAPECC. if not try making them same.
Regards
Suraj

Pls send material for idocs in ECC 6.0

Pls send material for idocs in ECC6.0

Hi sitaram s ,
IDoc
- IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Archiving Processed IDocs
IDoc archiving is a two-step process:
1. Archive the IDoc.
2. After that another job will be generated. You can see in your SARA for your trigger to delete those archived IDocs.
Have a look at transaction WE47, set "Archiving - Possible" for all statuses to be archived. Use transaction SARA with object IDoc to archive. If the above is set then all IDocs are archived the same way.
Transaction SARA works in the following way:
On the main screen enter IDoc as the object. Click on Customising -> Technical settings. This shows the logical filename (configured via transaction FILE & SF01) that will be used to get a filename when writing the archive files. It also shows the document type (that links to an archive via transaction 0AC0) or the archive, depending on SAP version. You can also set the size of the archive files and whether the deletion and storage jobs should execute automatically or not.
On the main screen there are, amongst others, buttons for ARCHIVE, DELETE and MANAGEMENT. When you click on ARCHIVE you will go to a screen where you can create variants, and set the parameters for the archiving job. The EXECUTE button will schedule this job. If the "start automatic" tic for the deletion program was not set in customising, you will need to go to the DELETE button on the main screen to schedule the deletion jobs, after the archive job has finished. This schedules a job per archive file. In MANAGEMENT you will be able to see the statuses of each archive run.
SAP Integration Using ALE(Application Linking and Enabling)
- IDOCS -
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Updating IDoc data in segments,Changing a control record of an IDoc,Getting IDocs linked to Application documents,
Displaying and IDoc in a report,Read IDoc from Database,Creating and sending an IDoc,Update IDoc status on the database
ALE Inbound Pre-Processing
http://www.erpgenie.com/sapedi/idoc_abap.htm
cheers!
gyanaraj
reward points if u find this helpful

Set PO item rejection indicator via IDoc ORDRSP?

Dear experts,
is it possible to set the rejection indicator in the purchase order item (EKPO-ABSKZ) via processing an order confirmation IDoc ORDRSP?
I found nothing but SAP note 890812 where SAP proposes a workaround with manual setting of the rejection indicator.
Our scenario is that the vendor sends an ORDRSP Idoc with action code 001 in segment E1EDP01-ACTION and a sales blocking reason in fields E1EDP01-ABGRU and E1EDP01-ABGRT. We already found a way to ignore segments containing these fields and process all other IDoc items, but it would be nice to set the rejection indicator automatically for these rejected items.
We are on ECC 6.0 SP06.
Any help is appreciated.
Kind regards,
Karsten

do you really want your vendor to decide if you have a request or not?
dont you need this reopened requisition to procure that material at the vendors competitor?
by the way,
The corrosponding purchase requisition is opened again and new PO's are created by MRP.
MRP never creates POs. MRP can create requisitions. But why should MRP do this in case your PR is reopened instead of deleted?
You should rethink about this statement.
MRP will probaby recreate the requisition if you would close the requisition with the Order response from your vendor, so why not reusing this PR instead of deleting and crating a new one?

Output via idoc/ale

Hello Guru's
creating output for billing docs via idoc.
Just one more question, I am doing this output via medium 6 and date 4 (send immediately) now since my output is founf in the billing doc and it is saving properly what is my next job to create the programme?
If you can tell me what would be the next process to see and maintain.
I have maintained port, partner profile, distribution model also.
Thanks
Aman

Hi,
Goto the T.Code NACE.
Select your appropriate output type.
Click on Details.
Goto Processing routines.
Maintain the medium as "6(EDI)" and program as "RSNASTED" and Form routine as "EDI_PROCESSING".
Please check with your ABAPer to trigger the IDOC.
Regards,
Krishna.

Validation rule cost element via Idoc

Hi all,
i am sitting on the following Problem:
we are creating master data via an external tool, called MDM. It is an Access based tool as far as i know.
These data's are send via Idoc into our SAP R/3 system. It works fine.
The only issue we have:
If you create cost elements, you have normally a validation with gives you a warning that e.g. this cost element already exist. Via our Idoc its just overwriting this already existing cost elements, also the history, all data's are nearly lost.
Do we have to customize special validation rules? Is it because of Idoc? why is the existing validation not be activated via Idoc?
I hope i have written down enough information, so that somebody can help me. Thanks
Michael

Hi Christian,
I have set a breakpoint in validation rule. The step from Financial Accounting is processed.
Prerequisite
BKPF-BUKRS = 'FAI' AND BKPF-BLART = 'WA' AND
BKPF-AWTYP = 'MKPF' AND BSEG-HKONT IN TESTE_CL
Check
BSEG-AUFNR IN TESTE_OP
The validation rule check only the first item from accounting document. So, all postings on account 1103010008 are blocked.
Itm   PK   Account           Account short text              Order            Amount
1   99   1103010008     STOCKS OF AUXILIARY                            63,15-
2   81   5102040001     Maintenance and Repa        101541          63,15
I need to check the second item from accouting document.
Do you have any suggestion to solve my problem?
Thanks.
Osmar.

Send out failed IDOCS as XML files or as email from production client

Hello Gurus,
We run SAP R/3 in a Retail environment and use MS BizTalk as the interface tool to our POS system.
We have a requirement to be able to send out failed IDOCs to developers / interface team for verification. This is not a regular task, but needs to be done once in a while.
Please advice how this can be achieved in a production region, where the IDOCS can be converted into XML format or emailed out for verification. How are such situations handled at other sites?
All help provided will be useful and rewarded well.
Many Thanks,
Regards,
Nisch

Hi Nisch,
I hate to write custom program,as i did lot of R&D On this ,there is no sap standard transaction,you can monitor by using WE02 or WE05 ,see each you can able to see one idoc completely by using WE02 or WE05 ,you can not send the data .
Thanks
Seshu

Cannot send email via Hotmail through port 587 with Secure Connection (SSL) set

Something is blocking my attempts to send email (with Outlook Express) via my hotmail.com account. The error I receive is as follows:
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'Hotmail', Server: 'smtp.live.com', Protocol: SMTP, Port: 587, Secure(SSL): Yes, Error Number: 0x800CCC0F
When Hotmail.com first changed over to a POP3 server (Sept 2009), I could send emails through them using port 587, which they require. But then something happened, with no changes on my part, to disable my ability to send.
I have checked and rechecked my Outlook Express account settings. I can send email through another third-party mail account (at 1&1 Internet.com) using port 587, which does not require setting SSL to yes. I can also ping the Hotmail SMTP server via port 587 and receive a response from it.
I connect to Verizon DSL via a Westell 327W modem/router. Clearly it is not blocking port 587 without SSL. Does it have the capability to block SSL traffic? Or is the Verizon server the culprit, not allowing emails to be sent via Hotmail.com?
Two different computers on my LAN have the same problem sending emails via Hotmail.com. I have tried everything the Hotmail people have suggested; at this point they think it is an ISP problem, hence this post. This problem doesn't make sense to me and is driving me crazy. Can anyone help me with this?
Thanks.

You can still have your reply address set to your hotmail address. And you don't have to really remember to do anything. Configure your client for the HOTMAIL account with Verizon's outgoing server. It will automatically send via Verizon. You don't reveal your verizon.net address, you are just using their server to transmit.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

HELP! HELP! Please.... Cannot send email via SMTP....

Hi,
Not posted here before but this really is a last ditch attempt to get my email working. I'm at my wits end with this.
I reported a problem that I could not send mail via SMTP (with Outlook) last December (2014). I kept getting a message from the mail server stating "421 Too many messages". They guys on live chat tried for an hour to get it working, finally gave up and told me to use WebMail instead. Ok, that worked but... in January that went off completely and I found that BT had removed my mailbox from the system!
It's now 19th March 2015. Today, (yes 3 months later) my mailbox finally came back online. At last I could catch up on all my lost messages, lost business and everything else that was important (yep all my old messages were THERE!).
BT support have been useless, in fact, more than useless. I'm abroad working at the moment and I've had to make many international calls to the UK to bitterly complain about this. They won't call me - they will only call a UK number so all the cost, plus the lost business and everything else is at my cost. So, webmail is working. I went to set up my Ouitlook client and guess what...? I have the SAME error message. The client is connecting but error is the same.
421 is a SERVER message which is telling me that the BT Mail server is not configured for enough connections. Either that or it's severely overloaded. This is BT's problem - not mine but all BT have done is fob me off with excuses for 3 months and now I'm back to square one. the support guys have no idea what this message means.
Today I was told that if I wanted it sorted I had to pay for BT Expert help.
What??? I don't need an "expert". I just want them to configure their server properly!
Can ANYONE - anyone from BT please, please help me to get this sorted. I'm tearing my hair out and as you may have guessed by now I'm also very angry about this.
I've tried making an online official complaint but that came to nothing as they told me as it was Outlook they couldn't help. Maybe it was set up wrong. It's not set up wrong - I'm a Network Engineer!! I've set up hundreds of Outlook accounts! The SERVER error message is like a big flashing sign stating that it's a BT issue. Why will no-one listen to me??? Why will they do nothing at all? This problem has been posted many times. Why is it not sorted?
Anyone???
Solved!
Go to Solution.

Yes of course I've contacted the Premium Mail help number. I've called them many, many times without any success at all and since I've been calling from abroad it's cost me a fortune to get nowhere.
These forums are for the BT Community. I'm part of the community since I still have BT services. This isn't a Broadband forum. As I've indicated though, I've been with BT for over 35 years so I think that entitles me to some sort of service - even from here if possible.
There is no issue with my account according to the BT staff. This has been checked and all is fine. The issue is that they are refusing to acknowledge that there is a problem although there clearly is one.
However.... your statement:
It also possible that you are being stopped from using BTs SMTP server, because you are not actually connected to BT Broadband. You would therfore be restriced to using webmail only.
... is new to me. No-one has told me that.
One has to then beg the question: "If you can only use so-called Premium Mail via the web then why are BT not telling people that?" No-one seems to know - even you Keith, say that "it is also possible...."
If this actually IS the reason then I could have been told that from the beginning.
Unfortunately, error 421 is one of the more "unspecific" codes generated by mail servers. This error can mean many things. It can show misconfiguration but it doesn't show up as a security lockdown - even though it could be. What I can't understand is why no-one actually knows. No-one can explain absolutely and that's what is really annoying here.
No-one will take responsibility and no-one is willing to even try to help me out here - that's what is really bad.
Keith, you've come up with something which makes sense that may well explain the issue - but the question is really: "What can I do about it?".
Nothing? I just have to put up with it? Great customer care....

Retail sending articlehirarchy via IDOC - WMATGRP (WMATGRP01) / *MATGRP*

Similar Messages

Maybe you are looking for

Retail sending articlehirarchy via IDOC - WMATGRP (WMATGRP01) / MATGRP