Retain Earing GL Balance Drill Down

Hi,
When we are displaying Retain Earling Account through FS10N, double click on balance which was posted through year ending closing procedure, Can we able to see next level i.e Line item level.
IF we want to display Retain Earning Account Balance at Line item level like norma GL, what is the procedure.
Regards,
Venkat

That is also my experience. SAP Note 176067 is unusually clear in explaining Retained Earnings and the lack of transactions for year end roll up.
You can see the balances that roll up into Retained Earnings at year end by running Balance Carry Forward again and selecting display retained earnings balance.  I used tcode FAGLGVTR.

Similar Messages

  • Business Partner Account Balance Drill Down

    I have a problem with a specific user a site not being able to Drill down into Account balance on the BP screen.  She has restarted her PC and is having the same issue on other PCs.  The drill down seems to working fine for all the other users.
    They are running 8.82 PL07  We've ran the restore item balances function, but the problem still exist.
    She can see the account balance and the drill down arrow, but SAP hangs as soon as she clicks the drill down buttton.  I doesn't cause any locks for any other users.
    Any ideas?
    Regards,
    Riana de Lange

    Hi,
    Please check these threads:
    http://scn.sap.com/thread/1870263
    http://scn.sap.com/thread/1502030
    http://scn.sap.com/thread/1609552
    http://scn.sap.com/thread/1976962
    http://scn.sap.com/thread/1337140
    Thanks & Regards,
    Nagarajan

  • Unable to populate the G/L account text ( description ) in drill down repor

    Hi
    We have developed the trial balance drill down report from FAGLFLEXT table under 0FL library for company code wise.
    The charecters are period,fiscal year  & Version and the key figures are HSL ( GLT0 table ).
    We are getting only the GL account number in the row ( actual requirement is we need to get the g/l account number and text beside of number ) . Please suggest.
    Regards
    Venkat

    Hi
    Thanks for the reply, this we have already tried. We are preparing the report for the trial balance which consists of the Balance sheet accounts & Profit and loss accounts. The total number of G/L accounts is more than 500. Here under the Charecteristic values we are giving the account number range . We dont want to manually enter the description for all the G/L accounts. The report should automatically populate the G/L account description ( text ) from the range of the G/L accounts such as 10000000-30000000 etc.
    Regards
    Venkat

  • Vendor wise drill down in Trial Balance or Balance sheet report

    Dear Experts,
    Is there any report for Trial Balance or P&L/ Balance Sheet report where vendor wise drill down of amounts is possible?
    Please suggest.
    Regards
    Komal

    Hi Dear ,
    You can use F.08 for Trail Balance  and Vendor details - S_ALR_87012082 - Vendor Balances in Local Currency
    You can get cumulative balance for the vendor.
    Regards
    Radha

  • Need Drill down in Customer Open Item Analysis by Balance of Overdue Items

    In SAP there is one standard report by the name of
    'Customer Open Item Analysis by Balance of Overdue Items'
    Can I change the report according to my need.. I want to add drill down and customer name to this report. I am using summarisation 6 as my criteria.
    Thanks
    Sajid Hakeem

    Dave!
    Thanks for the help man
    Just one last thing
    can you help us to add  drill down facility in the prescribed report. what code we should write to make it drill down to a line item report.
    Regards
    Sajid Hakeem

  • Retain value of Crystal Report variable during drill-down

    Dear expert,
    In CR, how to have a variable whose value is retained during drill-down? In other words, a variable whose value remains across drill-downs.
    I've tried both Global and Shared variables but their values are not retained when drilingl-down (the value is gone or removed).
    Thank you very much.
    Kind regards,
    aswin
    Edited by: Aswin Setyawan Margono on Jan 27, 2011 1:28 PM

    Not enough info to determine the result or what the cause may be.

  • S_ALR_87012169 R3 FCC 6.0 drill down help (AR account balance)

    Can anyone teach me how to display 87012169 Classic Drill Down Report?  I need check the history data from Oct. 2010 to Feb. 2012 AR transactions.   The Help > Application Help showed "No documentation available", I believe we did not install the help data.
    I tried to use ALR_87012173 for Customer Open Items (the partical payment did not deduct from original invoice) or 87012177 (did not setup the layout yet).
    Thanks,

    Hi PPIO:  I used FBL5N but all partial payment did not deduct from original invoice if you short of 0.01 cent, that is why I am trying other reports from SAP.  How you retrieve data and create your customized reports in R3?  We will implement BW in April 2012 but do we need any report tool to create our own reports? 
    Our internal SAP administrator told me the FBL5N can NOT display correct balance due that is can not do task.  I can not believe it, Can you teach me why we got incorrect balance due and what caused the problem?  Tks.

  • Trial Balance - Details with Drill Down

    Hello Experts,
    I know that SAP has a default Crystal Report for Balance Sheet , P&L which gives us a summary of accounts. Is there anyway i can drill down into the details for each account balance using this report. Is there a default report that i am requesting? How about creating Subreport using default report and link to the summary report? Please advise.

    Hi Praneeth.....
    Creating SubReport may create problem.
    I guess you have to make your own query.
    But Option for subreport is also not bad but it creates problem sometimes to execute the report.......
    Regards,
    Rahul

  • Balance Sheet , P&L Report Drill Down Reports

    Hello Experts,
    One of my client requires Balance Sheet, P&L Reports with drill down capability.
    Ex: In standard B1, When you run a balance sheet you will see summary of accounts. Client needs to look into the details from summary report by drill down capability. Have anyone worked with same reports before? Please help.

    Hi Praneeth,
    On the balance sheet, on the top right corner there is a field called - Level - on which you can select 1 to 5 levels. The level 5 gives the complete picture of each account. Same for other financial report like trial balance. Hope that solves your problem.
    Thanks,
    Kanu

  • FSI0 - Drill Down Reports for Account Balance Analysis

    Any orientation on this issue will be greatly appreciated.
    These are the steps I did to create a new Drill-Down Report for my customer.
    1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
    2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
    3. I select "Expand: Completely" to see all Account Balances
    3. All the totals match between the Original Standard Report and the new report I just created.
    4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
    ==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
    ==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
    Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
    Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • BP Negative Balance against Deliveries with out the Drill Down option...

    Hi Guys,
    There is a BP balance against Deliveries which is a negative balance. It does not give the option to drill down. when the entries were  checked, I can't find a same balance posted under a Return or a Delivery. Any thoughts. Thanks.
    Kind regards,
    Harsha.

    Hi Jitin,
    Thanks for the reply, how ever the issue arised after creating two Sales return documents(value £39.73), against one return a AR Credit memo was created which resulted in a balance in the Delivery as -38.21 and when tring to drill down an error was coming up (Internal error 6004 occured message131-183) and did not allow a drilling against the balance. But after cancelling the remaining Return the drilling option dissapeared leaving the negative balance of 38.21. No document can be identified agreeing to the same balance.
    Kind regards,
    Harsha

  • Drill Down Report FI, GL Balance Display

    Dear Expert,
      I am creating report with form using Drill Down Report GL Balance in FI using FIG1,2,3....
      I added formula column, in this formula column, I try to put variable inside the formula, but system always said:
         <<<Incorrect formula component = &1YF>>>
      I added the below:
         X001 / &1YF
    In which X001 is first column value, and &1YF is global variable for fiscal year.
    Please help me on what error is about so that I can fix.
    Many Thanks,
    KimC.
    Edited by: Kim, CheolYeon Lee on Jan 18, 2011 10:25 AM
    Edited by: Kim, CheolYeon Lee on Jan 18, 2011 10:26 AM

    Can you elaborate what are you trying to achieve exactly? as you may know there are cell level formulae and column level. Let us know.
    Regards
    Subodh

  • Drill-Down Report Printing Problem for Selection Parameters

    Dear Experts,
    Have tried to configure Drill-Down Report for Vendor Balances,
    Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
    User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
    Input Parameter Screen
    Report Output Screen
    Print Preview Screen (First Page - Selection Parameters)
    Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
    Thanks
    Regards
    P

    Hello Ms. Preeti,
    Thanks for your reply, Have designed the report through FKI0 (FKI*)
    Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
    Thanks for your help
    Kind Regards
    P

  • Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

    Hi
    I'm configuring cash management and have created all planning levels and groups needed.
    All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
    I've created all the groupings etc that I need.
    I'm running the reports FF7A and FF7B. I have two questions and problems.
    1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly  (E1-E9 and R1-R8). But when I try to drill into the cash management detail records  (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem  (using reports RFFDDL00 and RFFDKU00)
    When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
    2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000  (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
    Any help anyone can give me with these issues will be very much appreciated.
    Thanks.
    Wayne

    Hi
    I have the same trouble with Tcode FF7B.  There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK.  The message appears just witn Tcode FF7A.
    Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
    Can you help me??  can you solved this issue?
    Tanks for your Help

  • GL Account drill down crashing in 8.8

    Forum,
    In 8.8 PL17 when in the Chart of accounts screen, if any user tries to drill down into the account balance they get the following message:
    System Message
    (-100) Anything but a memory problem.
    This was not an issue on 2005 for this particular data set. Has anything changed with 8.8 due to the introduction of the archive function, or is it a computer resource issue?
    Regards,
    Juan

    Hi Juan,
    Gordon is right, there is some data integrity problem that is making the code go in loops. This can happen when users work directly on queries, or some bad data entered in user defined fields or perhaps power failure etc may have crash ms database problems, or it could even be sap b1 bug.
    Please contact your partner who in turn will contact sap and perhaps sap will dial in to fix the problem on work on your system directly.
    Hopefully you have recent database backup you can use, but then you may lose lot of production data. Hopefully it is not your production server.
    In anycase, go customer partner portal and open a medium severity defect or high if that is your postiion.
    Take it from there.
    Goodluck.

Maybe you are looking for

  • Please help, I think there's sth wrong with my Mac pro

    I just bought my Mac pro 2 months ago. And I just got it back from repairing 2 days ago :-<. This is how it happened, I shut it down after 2 weeks keep using and then put on sleep mode everynight when I was not using it. I shut it down before, and ev

  • URLConnection does not create file

    Hello, I have a server and I'm using URLConnection to create a file on the server and write some text into it. However, after I run my program, no exception is thrown, but also no file is created on the server!!! Here is the source code: URLConnectio

  • How to open another page on the same document in microsoft office 2008

    Hi, can you tell me how to open a page in microsoft office 2008, thanks

  • Weird duplicates situation in iTunes

    So a few hundred of my songs have duplicates. When I check the info, I find that the duplicates are "located" in other folders in my music folder. When I click "show in Windows Explorer" for the duplicate song, the correct folder opens (i.e. the fold

  • Image group load

    Hello, is there some open source lib proposing the loading of a group of images and watching the loading progress ? thanks you