Retaining Chapter markers from iMovie thru compressor

Hello folks. I want to thank anyone for their responses to this post. I have figured out that exporting an iMovie 6 project as a DV clip to compressor is the best way to bring a project into DVD Studio Pro 4. However, I make chapter markers in all my movie projects and I cannot figure out how to retain that information through export from iMovie - to m2v file from compressor and into DVD Studio Pro 4.
What gives? Any Help?

Hi:
After serching a little in iMovie forum I found this thread that could be helpful:
http://discussions.apple.com/thread.jspa?messageID=1703446&#1703446
Hope it helps and remember, Search is our friend !
Alberto

Similar Messages

Exporting Chapter Markers From FCP7 to Compressor for DVD Studio Pro

I put several chapter markers in a Final Cut Pro 7 sequence by hitting the "M" key a few times on the timeline.
I tried exporting the video with Compressor, both by using "Share" and "Send To Compressor."
When I load the post-Compressor video files into DVD Studio Pro, make a track, and look at the track timeline, the chapter markers are not there.
How do I send the video files from FCP7 to Compressor to DVDSP and have the chapter markers survive the journey?
(NOTE: I am not using Final Cut Pro X, where, I understand, that the problems with chapter markers are a whole different ballgame.)

When you hit m twice and get the marker window:
1. Make sure the marker is created on the timeline, not the clip;
2. you have to specify that it's a chapter marker. There's a pulldown or something to select it. It's NOT automatic.

Exporting "Selected Clips" and iDVD Chapter Markers from iMovie

I've tried exporting "selected clips" from iMovie . The iDVD Chapter Markers do not appear as a menu option on the initial iDVD menu screen when "selected clips" is checked in the iMovie Share option. The chapter markers are limited to the clips I'm exporting. The "Share" dialog box seems to indicate that Chapter Markers should export but they don't. // I'm trying to break up a movie that's too long for a DVD (but I will later share to video from iMovie). I'd prefer not to make two iMovie projects out of this. Thanks!
iMac FP 17 Mac OS X (10.4.6)
iMac FP 17 Mac OS X (10.3.6)

Hello, John,
Welcome to the discussions.
You can either do your 'share to video from iMovie' before or after creating your iDVDs. But, you will need to create a second iMovie if yours is too long for one DVD and you are wanting to make 2 DVDs from the one long movie.
To make the second one before sharing the entire movie:
Select the clips you want in the second movie, then go to 'Edit' and 'Copy'.
Then, select 'New' iMovie. When it opens, give it a name like "Part2" and then 'Paste' your selected clips. Save the movie, then go back to the first one. Delete the clips you just copied.
Close iMovie. Open your DVD project. Find the 'Media' tab, go to 'Movies' and drag and drop your first movie into iDVD. Finish the iDVD project. Save and close.
Then, create the second iDVD project for your second movie in the same way.
Do 'save as disk image' for each iDVD project. That way your project is intact for each one, and you will not lose anything when you change the iMovies. You can burn your DVDs from the disk images.
Now, go back to your second iMovie. Select the clips and copy. Close that movie and open the first one. Paste the second set of clips. Now you have your original movie back and can do your share to video from it. Delete the second movie.

Reimporting chapter markers from iMovie to iDvd

Hello all,
I have a project in which the scence selections highlight (cursor) order is messed up. I was wondering how i can re-import the chapter marker data into the iDvd project to sort of refresh it or start from scratch. Thank you so much.
PS: i am using the "reflections" theme in white.

order is messed up.
I made a project with the Refections Black theme and the highlights work oddly because of the position of the chapters. Use only the left or right button on your remote and see if it doesn't cycle "logically" through the chapters. Mine does. But it doesn't go from chapter 1 to chapter 2, and so forth.

How to set chapter markers in imovie 10

I am looking to set chapter markers at fixed intervals in imovie 10 as well as set custom chapter markers in family videos that I am converting from 8 mm tape. Does anyone know how to do this in imovie version 10.0.6. Thanks

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

Removing unwanted chapter markers from m2v files

I inadvertantly left some unwanted chapter markers in FC sequences which I then exported as m2v files. Is there any way to remove the chapter markers from the m2v files so I don't have to re-render to m2v? I have lots of files!

The original files were edited in FCP, then edited in Motion to add graphic overlays. From there, they were rendered as m2v using Compressor.
The chapter markers are all visible in both FCP and Motion, but both of those options require re-rendering from the source file type back to m2v. This is a time consuming step that I'm hoping to avoid by, somehow, removing the chapter markers from the m2v file itself.
I just need to know if there is any way to remove a chapter marker from an m2v file.

Keep chapter markers from fcp 7 to dvd studio 4

might've posted this before...
ive used iDVD for a while and know the preference for the chapter markers from FCP 7 to iDVD. finally using Studio pro trying to firgure out about automatic chapter markers. I edited it in FCP X and exported it to make the chapters in FCP 7
I have a few different format files
from FCP 7
8.03 gig DVD studio chapter marked
8.03 gig compression marked
then in compression
best quality 90 min DVD
A dolby Digital Pro 2 says "the destiation does not have read/write access"
or the mpeg 2 6.2mbps 2 pass """"""
then I tried using individual clips from fcp 7 in/out export feature, but that seems to to be to large
how should i fix this annoying issue

I'm talking about Compressor.
Compressor wants a destination to which to send an output file. Unless otherwise specifiedm the default destination is Source. That means it will be written to wherever (drive>folders path) the source file was stored.
Russ

Exporting Chapter Markers from FCPX

In FCP7 I can export my master file with it's chapter markers to a new movie file ready for DVDStudioPro.
How do you export chapter markers from FCPX?
Also, FCP7 allows you to export without making a self contained movie file that DVDStudioPro can use to burn the DVD.
Is it possible to export from FCPX without making a self contained movie file?
If so, how?
Thank you for your help.

If you're going to DVD Studio Pro, it will need to transcode to mpeg-2 at some point. If you exported a referenced QT movie from FCP7 previously, then DVD Studio Pro was doing the transcoding for you.
In FCPX, I suggest exporting using Compressor 4. Apply the DVD preset (mpeg2 video and dolby digital audio) and you can also apply chapter markers within Compressor.
Import the 2 resulting files into DVD Studio Pro and no further transcoding (other than menus) will need to be performed when you burn the disc.
~D

How do I insert chapter markers in iMovie '11?

In my various Google searches, I keep reading references to inserting chapter markers in iMovie, usually earlier versions. How can I manually insert chapter markers using iMovie '11? I really don't want to use iDVD, which apparently only lets you select how many minutes are between each chapter.

enable "show advanced tools" in iMovie preferences then you will see the little balloon indicated by the arrow.
drag it where you want to have your chapter in the project, give it a name, you're done.
when you'll export your movie and have it in idvd you'll automatically have the movie split in the chapters you've made.
Cheers,
Diego

How to use chapter markers in imovie

When I make a movie in i-movie with "chapter markers" and then transfer it over to i-tunes to play on my i-pod touch. The titles can be seen on my i-tunes but not on my i-pod touch ver 2, I can see the chapter markers but then are all "Chapter 1, Chapter 2 etc...not what I named them. They can be seen on my original i-pod touch. So what am i doing wrong with how i am making the movie or how I am playing/transfering them.

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

Will iDVD 08 recognize chapter markers from FCE 3.5 HD?

Will iDVD 08 recognize chapter markers from FCE 3.5 HD?
Thanks, Ed

A qualified "yes". Meaning it should work as stated but in practice there are some issues. There are fewer issues with FCE => iDvd6 than there currently are with iLife'08. I don't have a good explanation for this.
Btw, this is strictly an observation on my part from reading this forum. Keep in mind I do not own / work with FCE but rather with FCP => DVDSP as well as with apple's i-Apps.
Message was edited by: SDMacuser

Will Compressor 4 recognize chapter markers from FCPX?

With the latest updates to FCPX, I am now considering giving it a try. There is one more function that is critical for my work, and I can't find and answer for it. If I make chapter markers on the timeline in FCPX, then use Compressor 4 to compress it to .m2v files for DVD, do the chapter markers carry through, like they do with FCP7 and Compressor 3.5?

Currently, markers don't get transfered from FCPX to Compressor. Hopefully that will get fixed in a future update.
While we're waiting for that to happen, you can use this app to convert markers from a FCPX xml file to a .txt file that you can import into compressor. It's not the easiest solution, but it works.
https://github.com/rockwood/fcpx-Marker-Converter

Chapter Markers from Compressor to Studio Pro

I am tearing my hair out trying to figure out how to get the chapter Markers imported to Studio Pro when I compress my work in Compressor. I realize that they can be added after the fact in the Sudio Pro Timeline but it is a cumbersome process. My prefernce is to stay away from Qiucktime for Exporting as I have had better succes with Compressor. Any experts with Ideas?
Thanks, Bkent
IMac Mac OS X (10.4.7)

Bkent:
Any experts with Ideas?
Some ideas from a no-expert.
Did you exported your movie from FCP with Chapter Markers? File > Export > QuickTime Movie and select Markers > DVD Studio Pro Markers
If you did, you'll see the markers in Compressor preview. Those Markers must be in your final MPEG2 encoded video and DVDSP must see them.
Post your workflow if that don't that way for you.

Exporting chapter markers from FCP

I'm trying to export markers from my FCP (Final Cut Studio 2) timeline which I can then use as chapter points in DSP. I have exported the timeline with DSP markers but when I import the .mov into DSP no markers are apparent. Any suggestions.
Thanks in advance. x

Hello!
There is a few options here.
Personally I would suggest you send your timeline to compressor to encode to mpeg2 for DVDSP.
If you have placed those markers and made sure they are a <CHAPTER> in the comments section in your marker window, you can click add chapter marker in that window too, then the mpeg 2 will include those in DVDSP project when you import them.
(the marker window to make sure its a <Chapter> hit the M key when your play head is on the same frame as the marker.)
Bringing a quicktime into DVDSP has to encode the QT anyway... might as well do it right in compressor.
if thats not an option you can....
There is a way to import a "Marker List" but I dont remember how I did it. I just tried making a text edit document which I thought I did but that didnt work.
I will do some research and post back but I would suggest you encode your Project with chapter markers.
You can export using quicktime and include chapter makers too.. its a setting in your export options

Importing chapter markers from Final Cut Pro

I usually set up my chapter markers and screen shots in FCP.
If I share this to QuickTime or iTunes library, the chapter markers are present and work well.
This was not always the case but since the latest update of FCP it works like a charm.
However if I export it to COMPRESSOR (because it works faster) the markers are lost.
I have successfully set channel markers in COMPRESSOR and that works, but my work flow seems to make more sense to set up the channels in FCP. (this is mostly because I often decide to do an edit change when I think about the marker...)
COMPRESSOR gives me the option to load markers, but I don't know how to get them out of FCP.
So...
What do I need to do to export markers from FCP so they can be imported to COMPRESSOR.
(before you ask, both FCP and COMPRESSOR are the latest post-Christmas, vastly improved versions.
Thanks.
Barry

bholtzkener wrote:
What do I need to do to export markers from FCP so they can be imported to COMPRESSOR.
Barry, You shouldn't have to do anything. What settings are you compressing to?
Russ

Retaining Chapter markers from iMovie thru compressor

Similar Messages

Maybe you are looking for