Retaining deleted messages - problem with preference settings (?)

I have set up my Mailbox Behaviours to
1) automatically "move deleted message to the Trash mailbox" (this option is selected)
and
2) Store deleted messages on the server (IMAP)
and
3) Permenantly erase deleted messages when "One month old"
BUT... for some reason Mail keeps deleting my messages after approx on week. I have tried changing the settings various ways, but can't seem to overcome this problem. There do not appear
to be any restrictions or rules on my IMAP server side that would be over-riding the MAIL prefs.
ANYONE have a suggestion or know what my problem is?

I believe it’s the server, not Mail, who is permanently deleting those messages. Try turning OFF Store deleted messages on the server, so that deleted messages are stored locally instead, or create a new mailbox on the server and do Mailbox > Use This Mailbox For > Trash on it. Manually move messages to the mailbox that was previously being used to store deleted messages on the server (which should appear now with a generic folder icon in the mailbox list) and see whether the messages are still being deleted from there after one week like before, even though as far as Mail goes it’s now a mailbox like any other.

Similar Messages

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

We've detected problems with your settings- cant get past this initial error message so Im forced to use explorer

seems to be about cookies and cache clearing etc.
my compyter has been infested a few times so am reluctant to disarm the anti virus as im not 100% sure what im doing there
explorer works fine

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Message "problem with photo with the filename '(null).

I get the following message "There is a problem with the photo with the filename '(Null).' The full resolution version of this photo either cannot be located or is corrupt. Please replace the photo or delete it from your book." This message appears after place the order and it starts to submit the pages of the book. I get as far as page 9 of 60. I have open the pictures using photoshop and have renamed them and saved them as a tif format. Any suggestions?

annefromtallahassee wrote:
I get the following message "There is a problem with the photo with the filename '(Null).' The full resolution version of this photo either cannot be located or is corrupt. Please replace the photo or delete it from your book." This message appears after place the order and it starts to submit the pages of the book. I get as far as page 9 of 60. I have open the pictures using photoshop and have renamed them and saved them as a tif format. Any suggestions?
I believe that you have gone into the iPhoto library and made changes using photoshop - is that correct
If so then you have trashed your iPhoto library and must put it back exactly as it was - loading a backup is the easiest (probably the only) way
NEVER make any changes to the content or structure of the iPhoto library using the finder or any program that is not fully iPhoto aware
LN

Messages problem with ios 6

Hi
I have problem with messages related to bank or groups or unviersity . I can see the preview of last message but when I enter for example Bank I can't see any Previous messages . Some messages contain imp information . Can u fix this problem soon as possaible please .

I'm having the same problem with texts showing as unread. I click on the conversation and then click on back to go to the conversations and after about a second the texts go back to unread. It shows as 2 unread texts from my wife. I deleted 5 messages from the conversations, and the dot went away for a second and came right back and said two unread texts again! I had her send me a text and it went to 3 unread texts. Clicked into the conversation then back out and it went back down to 2 and the stupid blue dot came back! I've rebooted the phone and that doesn't help either.

Sent messages problem with 6021

I have brand new 6021 - the memory of the phone is by default half empty.
In the settings I have enabled the option of save sent messages.
However, this does not happen. Simply, sent messages are not saved. Up to only one message is saved - on the sim card. After that, the phone simply does not register sent messages.
With the inbox, everything works fine.
I tried reset to factory settings, and other options, but unfortunately nothing is working.
ANy idea how can I activate this function?? And what might be the cause of the problem?
Thanks in advance,

Those message usually indicates, that your in an area with a weak wifi or cellular data signal. I speak from experience as this is the only I see that message pop up on my phone.

Messaging problems with Nokia 6760

Hi,
I purchased my Nokia 6760 about 4 months ago, and everything was working perfectly until a week ago when it just stopped sending messages. All the messages sit in the outbox.
I have not made any changes to the Messaging Settings, this loss of messaging ability happened spontaneously.
Im sure there is no problem with the network, as when I put the SIM in other phones, messages do send.
Please help me fix this problem. Thanks.

I have just encountered this exact same problem as you! I have had the Nokia 6760 slide for approx 5 months and all of a sudden the sms messages are not being sent. Everything else works fine, and like you, when I put my sim card in other phones I can send sms messages normally.
Has your problem been fixed?? Any help/tips would be much appreciated! Thanks!!!

This is a tough one! Problem with sequence settings....

OK...where to begin!
Here is some background (I have posted many questions about these issues and have resolved most of them, except this project)
1.Recently upgraded to 6.0.1
2. 'lost' my scratch disc (ok, I accidently deleted it)
3. All projects are OK to do without, except this one!
4. The footage for this project was from 2 cameras: one is DV and one is HD. The HD footage was downgraded to DV during capture from camera for the original project. Now, with 6.0.1, I bring it in HD and mix the footage on the same timeline with the DV (which is so cool and so much easier for me!) But I wanted to make sure and do the same thing I did for the original clips on this project, so when I just batch captured all the clips, I brought the HD in as DV. Both were shot wide screen.
This one sequence is 6 minutes long and I COULD recreate it, but it is very detailed and has a lot of filters, edits, etc. Here is the problem:
I did a batch capture on all the clips and successfully got all the clips back and the timeline plays, but the two different "cameras" footage looks different in the canvas: (the sequence settings are frame size: ntsc dv 3:2, pixel aspect ratio ntsc-ccir601/dv and anormorphic is checked)
The HD footage, downgraded to DV, looks fine
The DV footage is stretched, and has a bar on the top and bottom.
I have played around with the sequence settings and these are the best results i can get.
Now I made a new sequence with same settings as above and i dragged a couple different clips from the browser into the timeline and they are fine... (these clips are the same ones in the problem sequence that look stretched)
Any ideas??
Thanks in advance!!

I understood that the sequence looked at the first stuff dropped into it for behavior. If you dropped the problem material from the first sequence into the second sequence you created prior to dropping any thing else in then it will behave as you would expect. if you dropped footage that wasn't formatted the same as your sequence settings you get the "...would you like to ..." and the sequence settings get changed. I avoid this because some of the changes applied don't allow my Kona to playout.

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

Boot message: problem with hard drive detected. Slow loading of windows 7

Good Day
I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
the messsage says hard drive failure imminent you should back up you data etc.
My specs are:
Intel core 2 duo e8400 3.0 ghz
4 gig ddr3 transcend
1 tb seagate 7200.12
giga byte nvidia 9800 gt 1 gig ddr3
Please help lots of data.

Another option:
Take your hard drive out and slave it into another KNOWN WORKING PC.
Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
MCSE: 6771498

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Problem with memory settings

Hello,
i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios v3.9).
I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
Has anybody an idea why this happen and how i can fix it ?
Thanks,
Fab

Hi there,
For some reason the BIOS settings have a rather confusion relation.
This is what my experiences have been, please try them and report your findings:
- MAT is enabled (and overrules SPD or manual memory timings) if:
Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
To get a stable system, I'd advice the following:
- Go back to default BIOS settings.
- Disable D.O.T.
- Disable Spread Spectrum
- Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
- Choose SPD timings for your memory (or set them below SPD timing manually).
- Start with performance settings to SLOW.
Check memory timing settings (chipset) with AIDA or CPU-z.
Check stability with Prime95 & torture test on maximum RAM.
Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
Once you got it stable, continue from here.
Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
If anyone has techdoc on these matters, I'd appreciate an URL.
Bios 2.3 on 865PE neo2-LS
Twin Kingston ValueRam Cl2.5 (winbond)

Retaining deleted messages - problem with preference settings (?)

Similar Messages

Maybe you are looking for