Retaining information in a Package

I've completed 3 forms in LiveCycle Designer 8. I have combined these forms in a Package in Acrobat Professonal and placed a clickable link to open those forms on a web page. I'm noticing that if the person filling out one of the forms goes to another form in the Package and then returns to the original form all of the information is gone. How do I retain all information until the person exits the Packaged pdfs?
I'm also noticing that while there are 5 pdf pages within this pacakge - of which 3 are forms - there is no option to print the entire package online (through the viewers Acrobat Reader 8 and above). How can they print the entire Package - all 5 pages?

Is this the right Forum to ask this question? Are there other/better places to ask this?

Similar Messages

  • It appears that iPad does not retain information from prior years - appointments, etc.  Valuable info is lost unless there is an archive feature that I cannot find.

    It appears that the iPad, and also the iPhone do not retain information for prior years, such as appointments, etc.  Unless there is an archive feature, which I have not found, valuable information is lost.  Any help would be appreciated.

    Thank you so much to JimHdk.   A really simple solution, but I guess I am not totally familiar with my iPad.  I have a high learning curve with my iPhone also.

  • Information about updated packages

    Often when I update my system I want to know what changes have been made to a specific package. Does arch have this information somewhere? On other distros there are places you can look up what the new changes are to a package. It would be good to know if the updated package is just a new build from upstream, a change in the configuration, or a patch to fix some security flaw. For certain things like kernel updates or binutils I can get paranoid upgrading and would just like to read some change log.
    It seems like the most logical places for this in my mind would be a flag to pacman when doing -Suy or perhaps information about the update on the RSS feed for new packages.

    f4hy wrote:The -Qc option is great for the limited packages that have changelogs, but at that point it is a bit too late. It would be nice to know what will be changed BEFORE upgrading the package. A flag to pacman to give the equivalent of -Qc but for --sync would be nice, unfortunately -c is already used :-\
    You can query packages before they are installed, you just have to point it to a file with -Qcp.
    The file must be local, which means downloading it first.
    [fp@oscar ~]$ pacman -Qcp `sudo pacman -Sup|grep -e ^http`
    error: package "http://mirrors.gigenet.com/archlinux/core/os/i686/dhcpcd-4.0.10-1-i686.pkg.tar.gz" not found

  • Need information about Enhancement packages

    Hi all,
    We are planning to implement Enhancement Packages in our Solution Manager server. The primary purpose will be to generate reports for the BI and APO systems configured in the Solman 7.0 system-System status and health check reports.
    Can anyone help me with some information and how beneficial EHP will be for reporting and any other better ways to utilize that?
    Thanks,
    Anupama

    Hi Anupama,
    Hope this is regarding EHP1 for solman?.
    1) For Health Checks, you already have EWA- this forms the primary Report for your analysis of the system and by default you can get EWA for ABAP-(little configurations needed). But for getting EWA-Java you need to configure Diagnostics. Diagnostics will also help in root cause analysis,in case of any issue - EHP1 has the guided procedure for the same. Also Live cache- workload analysis is also possible.
    2) System Status - Once the sytem monitoring and Alerting mechanism is configured, you can get the status of the system, Errors,
    job failures etc. Its an enhancement of CCMS.
    feel free to revert for queries.
    Thanks,
    Jagan

  • Information regrading Business Packages

    hi all
    I want to know more about the business packages for EP which are delivered by both SAP and Third Party.Can anyone send me link or note where i can find all the information related to these packages.

    Hi Gautam,
    You may find this link a useful overview of EP business packages:
    [https://www.sdn.sap.com/irj/sdn/contentportfolio|https://www.sdn.sap.com/irj/sdn/contentportfolio]
    Regards,
    Andre

  • Required detailed information on "Business Package for Buyer"

    Hi All,
    Can anyone provide more detailed information on <b>"Business Package for Buyer"</b> . I am basically looking for some <u>demo</u>, sales <u>presentation</u>, more on what the package is providing with screen shots to see the look and feel.
    Regards,
    Vishal

    Hi
    It's basically an E-Portal solution, which covers majority of enhanced features. (E-procurement, etc)..
    <u>Some Related links -></u>
    http://www.sap.com/solutions/business-suite/srm/pdf/BWP_SupplierEnablement.pdf
    http://www.sap.com/services/pdf/BWP_SAP_Best_Practices_for_Baseline_Package.pdf
    http://www.sap.com/platform/netweaver/pdf/BWP_Portal_Content.pdf
    http://download.sap.com/download.epd?context=642A6604589217F513EAAF63FC1EC17B4A0BCA320C09F96DDDBCD0C0AD46BCDE878D0DA7ED26956FC637FB082E4DD6D3D3D8890CECA87ABA
    http://www.sap.com/solutions/business-suite/srm/pdf/yorkshirewater.pdf
    http://www.sap.com/platform/netweaver/pdf/BWP_Security.pdf
    http://www.sap.com/industries/professionalservices/pdf/CS_ESPRIT.pdf
    http://www.sap.com/industries/millproducts/pdf/CS_CERATIZIT.pdf
    http://www.sap.com/industries/professionalservices/pdf/SAP_Project_Res_and_Fin_Mgt.pdf
    http://www.sap.com/solutions/pdf/Image.pdf
    <i>Note -></i> Best place to search in it for more details using SAP Official website - <u>www.sap.com</u>
    Regards
    - Atul

  • Object COntent information for deleted packages still visible in content status

    Hi,
          I have a situation in our prod. SCCM site where deleted packages still have their object content information visible in Content status in SCCM. Has anyone faced the same issue?

    Hi,
    Check distmgr.log
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Help and Information with Wine Package Arch64

    Hello,
    Sorry if i put this in the wrong area or anything like, i'm new on Arch and on this forum and sorry about my poor english, i'm from Brazil,english it's not my native language
    I'm using Arch for 2 days, i was a Debian user, actually, i'm still have Debian on my master hard drive, but, i'm planning to change for arch because i really like the distro.
    I was giving a shot with Arch and i really liked alot the system, it's really simple, really fast, really stable and the most important to me: REALLY UPDATED!
    Well, i need more like an information, and i cant find-it. I'm maintainer of some apps at WineHQ and i prefer to use Wine Development release instead of the Stable Release,
    The wine now is in Stable with no development release (Wine 1.6), and i really don't know if the Arch Packages maintain the Stable (most likely) or when there's a Development release they jump to the next Development release (i think will be 1.7.0).
    If the wine will continue on stable release, i want to know how to compile a package to Wine Development (and in the future, i may create a AUR package to help the Arch Community, something like wine-dev).
    Well, i've tryed the basic (classic) steps (configure,make,make install), but, on debian i have the apt-get build-dep to get all wine compilation dependencies and on arch i can't find then.
    On the configure i get the following dependencies missing:
    configure: libOSMesa 32-bit development files not found (or too old), OpenGL rendering in bitmaps won't be supported.
    configure: OpenCL 32-bit development files not found, OpenCL won't be supported.
    configure: libhal 32-bit development files not found, no legacy dynamic device support.
    configure: lib(n)curses 32-bit development files not found, curses won't be supported.
    configure: libsane 32-bit development files not found, scanners won't be supported.
    configure: libgphoto2 32-bit development files not found, digital cameras won't be supported.
    configure: libgphoto2_port 32-bit development files not found, digital cameras won't be auto-detected.
    configure: liblcms 32-bit development files not found, Color Management won't be supported.
    configure: gstreamer-0.10 base plugins 32-bit development files not found, gstreamer support disabled
    configure: libcapi20 32-bit development files not found, ISDN won't be supported.
    configure: libgsm 32-bit development files not found, gsm 06.10 codec won't be supported.
    I'm trying to install lib32-* packages via pacman but, even then, i can't solve this dependencies to compile.
    I'm also instaled the base-devel package
    I'm searched on both Arch Official Packages and AUR but i can't find a wine-dev package/pkgbuild.
    Sorry if i said something stupid or wrong, i'm new on the arch system, i'm still learning how everything work rsrs.

    the pkgbuild and other files needed to build wine are here : https://projects.archlinux.org/svntogit … kages/wine
    the logs of previous versions are here : https://projects.archlinux.org/svntogit … kages/wine
    For building wine you'll need to install the multilib-devel group .
    Also read up on ABS and makepkg in the wiki.
    Last edited by Lone_Wolf (2013-07-18 22:36:48)

  • Need somne information about some packages.

    Hi I am trying to understand a script where some packages are used.
    dbms_sql.open_cursor
    dbms_sql.parse
    dbms_sql.define_column
    Can someone explain me what theses packages do?
    FOR cur_source_rec IN cur_source LOOP
    lv_version_cursor_num := DBMS_SQL.OPEN_CURSOR;
    lv_dml_statement_txt := 'SELECT ' || cur_source_rec.name ||
    '.what_version FROM DUAL';
    BMS_SQL.PARSE(lv_version_cursor_num, lv_dml_statement_txt,
    DBMS_SQL.NATIVE);
    DBMS_SQL.DEFINE_COLUMN(lv_version_cursor_num, 1,
    lv_package_version_txt, 100);
    Well I d like to know what theses special functions do.
    Where can I find a complete definition of these packages?

    The documenation is always a good place to start.
    Cheers, APC

  • Does not retain information on pages in NNEREN MLS, "back" button goes to a message saying Mozilla does not retain information. Makes MLS almost unusable.

    We realtors use MLS constantly. In our community the address is www.nnerenmls.com I can search for properties, but as soon as I select one to gather more information, and then go back to the search results, I get a message saying that Mozilla does not save information, which means that I have to run the search criteria all over again. Sometimes I have to do this a dozen times just for one project. Not acceptable. This is a recent problem, and it means that I have to use a different software for MLS. Is there a way to tell mozilla that I want it to save the data it retrieves so that I can go back to the results after looking at the details? Thanks.

    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    You may be in Private Browsing mode.
    Type '''about:preferences#privacy'''<enter> in the address bar.
    The button next to '''History,''' select '''Use Custom Settings'''.
    Turn off '''Always use private browsing mode'''

  • Information needed for packaging Shorewall

    OK, I searched the forums, browsed the mailing list archives, asked in chat and no luck... time to post! ;-)
    I am packaging Shorewall, an excellent high-level tool for configuring Netfilter.
    AFAIK, no one is doing this, I need it so I thought "hey guy, go and do it yourself so you can contribute to Arch!".
    Just a quick question, in order to correctly adjust the relevant entry in shorewall.conf: does Arch use locks in init scripts?
    It seems to me of no - aka: grep lock /etc/rc.d/* returned nothing - but I'd like to be sure.
    Thanks a lot for any replies, as soon as it's ready I'll post the package and all the needed stuff to build it with ABS in /incoming.

    Hi Christine,
    You can iview related properties like types details here
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb51610e6a11d7b84900047582c9f7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb51610e6a11d7b84900047582c9f7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/1232a8ef574332ba83406f4f5343a3/frameset.htm
    Hope it helps,
    Swathi

  • HT1529 i created an Itunes on my laptop time ago, my laptop has since died on me.  I was able to retain information such as sound i had manually downloaded ie cd´s i had at home... i am now a proud owner of an iphone and i want to recoop that music how do

    i am now a new owner of an iphone 4 and i use to have a laptop which had all my music of cd´s i had i want to retrieve that information how can i do that? serial number is c8*******png all caps my number is 62*****6
    <Edited by Host>

    What you need to do is open iTunes and import the CDs using iTunes.  Then you can transfer them to your iPhone.  Without knowing more about what operating system your Mac is using we can't tell you how practical it will be.  Without knowing where your music was stored by the prior computer and with what operating system, it will be hard to know how to recover it.

  • Information from opensparc package, don't reply,thanks.

    [don't reply,thanks]
    verification:
    i find sims script use tools\src\sims\sims,1.262 script and one of the two config file (core1 and chip8) to realize the simulation.
    Differences between core1.config and chip8.config are:
    1. the switch "-config_rtl". In core1.config,there is one RTL_SPARC instance while eight in chip8.config.
    2.the switch "-config_rtl".In chip8.config, there is oneRTL_IOBDG instance.
    3.the switch"-sas_run_args=-DSP".In core1.config, there is one while 8 in chip8.config.
    4. the switch "-sim_run_args=+BW_BFM".In core1.config,there are 7 bfm which none in chip8.config.
    5. other differences.
    synthesis
    1.tools\perlmod\rsyn,1.0 is the true script;
    2.design\sys\synopsys\script\target_lib.scr should be changed to use your own asic library;
    3.design\sys\synopsys\block.list is don't touch module list. OpenSPARCT1_DVGuide.pdf would make a mistake about block.list

    Due to some reason, I can't continue doing verification.I am now trying to read HDL code and to understand the structure.
    Now modules under analog directory will be analyzed first.
    Under this directory there are the funcional view of the analog blocks in Osparc T1.
    1.under dir-"analog\bw_clk",there are the modules which gives the description of clocks.there are jbus_clk,ddr_clk,cmp_gclk.
    The module"bw_clk_cclk_hdr_48x" is unuseful.
    The module "bw_clk_cclk_scanlasr_2x" defines the scan data out(so).
    The module "bw_clk_cclk_sync"defines the synchronization of the jbus data transferring(tx and rx) and dram data transferring by cmp_clk.
    The module "bw_clk_gl" defines the global clocks and buffers.
    The module "bw_clk_gl_rstce_rtl" defines the global clock buffers and repeaters.
    2.under dir-"bw_ctu_pad_cluster",there is only one file.One signal is jclk(J_CLK) and will be enable when define the RTL_PAD_CTU(RTL_CTU) state.Another signal is tsr_testio(TSR_TESTIO[1:0]) which is from tempsensor.
    Also 1.5v digital vdd and 1.8v analog vdd are defined.
    3.under dir-"bw_iodll", there are three files.
    One is bw_iodll.v, which is master delay-locked loop.the signal lpf_out will be bypass_data if io_dll_bypass_l equals to zero.
    The second is bw_ioslave_dl.v, which is slave delay line module.The signal dqs_out will ouput after the input has delayed 1/4 cycle.
    The third is bw_iodll_code_adjust.v.Because I have no idea about PLL. So i don't understand about it.
    These three files are not used by the top module IOP,which sounds strange.
    4. under dir-"bw_pll",there is only one file- bw_pll.v,which describe the functional view of PLL.It seems PLL uses 200MHZ clock input. I don't understand about it.
    5.under dir-"bw_rng",there is one file. this is the random number generator module.the random number is generated per 0.5 us.the rng_clk is 1us period.
    6.under dir-"bw_temp_diode",there is one file,which is temperature senser diode module with three pins.(I don't know how does it work)
    7.under dir-"bw_tsr",there is one file,which is temperature sensor register.dout is the weighted value of temperature.
    p.s. I will post my idea about opensparc T1 in following days.Because I am now a student and busy for my lessons , I would make many mistakes .Hope everybody give me wise advices in new posts.
    Thanks.

  • Is there any field on waste packaging information in MM03

    Please help me in finding any field on waste packaging information in MM03. If it is there please let me know in which view we can find it, if not let me know where else i can find information on Waste packaging.

    Hi Vinod,
    If i got you right,  you need the information on Packing material in material master, if this is the case then go to
    Material Master - Basic data1- Packaging Material Data here you get to see
    1) )Material group packing material -  here grouping of materials which require same kind of packing is done.
    2)  Reference material for material packing - here material number is given which is to be packed with the similar packing and there should be a material master record for the reference material.
    3) Product composition - if you check ithis tab then composition gets  printed on packing      
    For example - say you have two material X(glass bottles) and y( glass jars) since these two are one of a kind they require same kind of packing.
    hope this will help you
    Thanks
    Abdul

  • Package Run Prompts For Connection Information

    I've just loaded up Version 1.5.0.53 (my first version of 1.5), and I observed that when I try to run or debug a package, I'm prompted for connection information. The package works fine when I fill in the credentials. Is this expected behavior?
    I believe that it is different than previous versions, where it seems like the open connection was shared. I can't find a setting in Preferences that seems appropriate for this.

    No, I don't like to save my password...
    But even as I type this, I realize what my problem is. The behavior is working as designed, it's just that for earlier connections to my development environment, I did have passwords saved. I mistook the change in behavior as a change in the tool, when it also coincided with a change in my focus towards my QA environment.
    Thanks for help getting me past PEBKAC.

Maybe you are looking for