Retake button gone after Reviewing Quiz

Scenario: You give a user the option to both Review Quiz and Retake Quiz. User chooses Review. When they get to the end of the Review the Retake button is gone. Is there a way to show the Retake button in this situation? Ideally a person could first Review and then Retake.

Unfortunately no. If you flunk the quiz on an attempt (by not achieving a passing score) you get the option to Retake Quiz, but the button doesn't appear if you pass.
If you click the Review Quiz option, you do not get the option to Retake Quiz once you get back to the Quiz Results slide.
I think the basic reasoning behind this is that for a quiz to be a true assessment of the learner's knowledge, they should not be able to just review the quiz, find out all the answers, and then just retake the quiz immediately to answer all the questions. That would be like just giving them the answers for free.
So if you review quiz, you need to relaunch the lesson before you can attempt the quiz again.

Similar Messages

Retake button disappears after Reviewing Quiz

Long time lurker, first time poster...
I have a quiz template that I'm trying to finalize for my department using Cp 5.5 and the retake quiz button disappears if the user reviews the quiz. Is this a settings issue or is it that a user cannot retake a quiz in Cp after reviewing the correct/incorrect answers?
I have the quiz preferences set as follows:
Reporting:
Enable reporting is checked
Standard (SCORM 2004)
Report Status:
Pass/Fail
Report to LMS as:
Score
Choose Report Data:
Quiz Results Only
Reporting Level:
Interactions and Score (although this probably should be changed looking at the settings above)
Settings:
Quiz
Name: Quiz Name
Required: Pass Required
Objective ID: (default)
Interaction ID Prefix: (nothing entered)
Settings:
Shuffle answers (unchecked)
Show Progress (checked)
Allow Backward Movement (checked)
Show Score at the End of the Quiz (checked)
Allow User to Review the Quiz (checked)
Pass or Fail:
Pass/Fail Options:
100% or more of total points to pass
If Passing Grade:
Continue
If Failing Grade:
Infinite Attempts (checked)
Show Retake Button (checked)

hi capSean
i have the same requirement (if learner fails and wants to review, learner should be able to review, then retake quiz) and here's my work-around: instruct learner that if he/she wants to review first, THEN retake, he/she must rewind the course to the beginning. this clears out the answers. on my (SumTotal) LMS settings, i have to allow infinite attempts.
best of luck,
theresa

After Reviewing Quiz 1 time the Retake Quz button disappears

Does anyone have a solution to make the Retake Quiz button appear after one quiz review?

If you Review Quiz you do not get the option to Retake Quiz. Captivate has taken the view (and I agree with it) that it would be cheating if a person could just Review a Quiz, find out all the right answers, and then Retake the Quiz to pass with those answers.
Once you Review Quiz, you need to relaunch the lesson to attempt the quiz again.

Flash buttons gone after active-update

Hi,
Just performed the active-contect update for flash and
dreamweaver.
After the flash update, nothing had changed. Still needed to
click to activate a button, made in flash (8).
Then I installed the dreamweaver update 8.0.2., also with
updates for active content.
After opening the pages in Dreamweaver 8 I got the promised
question what I wanted to do with the <object> items.
I choose to update them.
Now everything worked fine when I testet the page on my own
server (PC) but the oploaded files where NOT.
All flashbuttons where gone, they just didn't appear!
It took a while untill I found out what the problem was.
Since everything worked fine on my own server, It had to be
something with the uploaded files.
All pages where changed, uploading the swf files didn't bring
the solution, so it had to be something else.
My site has many folders, it's a big site.
When I checked the folders on my own servers I found a new
folder called: Scripts
Uploading this folder solved the problem.
Nowhere in the manual, help files or explanations is
mentioned there will be a new folder called Scripts.
When you have a small site with a few folders, you will
easily spot it, but when you have more then 50 folders.....
Regards,
Eric

"Eric72" <[email protected]> wrote in
message
news:ej1v80$9f$[email protected]..
> Hi,
> Just performed the active-contect update for flash and
dreamweaver.
> After the flash update, nothing had changed. Still
needed to click to
> activate
> a button, made in flash (8).
> Then I installed the dreamweaver update 8.0.2., also
with updates for
> active
> content.
> After opening the pages in Dreamweaver 8 I got the
promised question what
> I
> wanted to do with the <object> items.
> I choose to update them.
> Now everything worked fine when I testet the page on my
own server (PC)
> but
> the oploaded files where NOT.
> All flashbuttons where gone, they just didn't appear!
>
> It took a while untill I found out what the problem was.
> Since everything worked fine on my own server, It had to
be something with
> the
> uploaded files.
> All pages where changed, uploading the swf files didn't
bring the
> solution, so
> it had to be something else.
>
> My site has many folders, it's a big site.
> When I checked the folders on my own servers I found a
new folder called:
> Scripts
> Uploading this folder solved the problem.
>
> Nowhere in the manual, help files or explanations is
mentioned there will
> be a
> new folder called Scripts.
> When you have a small site with a few folders, you will
easily spot it,
> but
> when you have more then 50 folders.....
Good point, it should say so in the Help files - you might
want to let Adobe
know of that oversight.
Personally, I was pretty happy to have that problem solved so
quickly and
automatically by Dreamweaver - seemed like a big convenience
to me..
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Button gone after ios5 update

Where did the button that opened all safari pages go after iOS 5 update?

Safari now uses tabs to open new pages. That feature for the open windows no longer exists. Tap on the + sign at the right side of the toolbar to open a new tab and you can enter the web address in the url bar or use the seach field to find whatever you are looking for.

Speaker Button gone after downloading realtech driver

hi all new here been having issues with pc latley with internet explorer not responding and my photoshop elements 5 program not wanting to open so i downloaded all the updates for my drivers, since then my little sound Icon is gone from my tool bar and replaced with realtek HD Audio manager?? maybe this wasnt something i need to update? and how do i get the factory sound button back?? do i need to uninstall the update and if so how?
I have compaq presario, vista home premuim ,model # SR5310F
lost\
thank you
moonchaser0
Message Edited by moonchasser0 on 02-13-2009 11:52 AM
Message Edited by moonchasser0 on 02-13-2009 11:52 AM

There are two volume icons that can build to the notification portion of the system tray (next to the time).
The gray speaker icon comes with Vista and is for adjusting Windows volume levels and (as you noticed) the orange volume icon is for Realtek HD Audio manager.
They both essentially do the same thing, but Realtek gives you a fancy interface, more options, and hides the Windows icon (on some models - I think).
I believe you can uninstall through add/remove programs in Control panel. Then, you can reinstall through HP's Recovery Manager program.... read about it here.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Reset and retake quiz after reviewing - Captivate 8

Hi there,
I have seen that people have discussed this before but I didn't find a simple solution and was hoping Captivate 8 may have actually come up with something lovely (not holding my breath though!)
Is there any possible to let the user review the quiz AND THEN retake it? The 'Retake' button disappears after they review the quiz, so I was wondering there was a way I could manually reset the quiz and use my own Retake button. I have tried using the cpQuizInfoAttempts and taking the user back to the first question slide but it does not reset and looks just like the review.
Thanks in advance!

Booo
Thanks for responding as always Lilybiri!

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Review Quiz Not Working

I created an assessment and I've set the quiz preferences to
allow the user to review it. When I preview the project I get the
screen with the results and a button that says Review Quiz. When I
click that button it just replays the quiz again as if I were
taking it over. It does not display my answers or any
feedback.

quote:
Originally posted by:
jaden55
So I think you're saying because I didn't create a Question
Slide it can't be reviewed. I don't see an option for creating a
Question Slide with clickboxes.
Exactly, you can only use the 'review quiz' function to
review proper quiz question slides. There is not a click box
question slide available, but the nearest to it is the 'Hot Spot'
question slide.
You can include click boxes as part of your quiz, like you
have done, but you might as well de-activate the facility to review
quiz as it won't apply to those slides.
Webbo

Retake button does not appear after test review in Captivate 6

Hello All,
I can't figure this out and it is really causing problems.
I have a 20 question quiz randomly pulled from questions pools. I am publishing this as Scorm 2004 and delivering via I SPring scorm compliant LMS.
The requirement to pass is 100%.
On the results slide I have a review quiz button, retake quiz button, and a continue button.
If a user does not pass the first time they either retake the quiz or review the quiz first.
If they review the quiz, when they return to the results slide the Retake quiz button is no longer there, and I cannot seem to come up with a way to make it appear, or reset the quiz for a 2nd attempt.
I have Completed settings to 100% on Quiz.
Pass settings to 100% on quiz.
I am showing the retake button.
I have set it to "Unlimited attempts"
Any suggestions? It seems to lie in the link between reaching the results slide from the review path rather from an attempt path?
Thanks you.

Hello,
Bad news, because that is the way Quizzes are designed in Captivate. Reviewing will disable any future attempts, is meant only to be used after attempts are exhausted. For that reason personally I will hide the Review button by dragging it under the Retake button for quizzes.
Have a look at my blog post about question/score slides (hurry, Posterous will close down soon):
http://lilybiri.posterous.com/question-question-slides-in-captivate
Lilybiri

After selecting Review Quiz, user is not provided path to Retake Quiz.

Additionally the play bar must be used to move through review instead of a button. All settings seem correct. Advice anyone?

That is by design: if the user chooses to Review, the remaining attempts on quiz level are considered over. For that reason I will always drag the Review button under the Retake button, so that it will become visible only when all Quiz attempts are exhausted.
During Review you need the Next button (that doubles as Skip button during Quiz). To avoid confusion for the user between Submit and Next, I will drag the Next button under the Clear button. It is not possible to drag it under the Submit button.
More details: Question Question Slides in Captivate - Captivate blog

Quiz Retake Button - Only Show Question Slides

I currently have courses with quiz question slides at different places throughout.
Example:
Slide 1
Slide 2
Quiz Question 1
Slide 4
Slide 5
Slide 6
Slide 7
Quiz Question 2
Slide 8
Slide 9
Quiz Question 3
etc...
I have the Retake Quiz button on the results slide if a user fails the quiz. Is there any way to have the Retake Quiz button show ONLY the Quiz Questions slides, not the content slides in between? Currently, when the user clicks the Retake Quiz button, it directs them to the first quiz slide (Quiz Question 1), but after answering, the course continues to the content slides (Slide 4, Slide 5, etc...) before it reaches the next quiz question. Since the quiz slides are not directly consecutive, can the Review Quiz button be programmed to only show quiz question slides?

Hi there,
You can do this using advanced actions and user variables.
you can create your own variable and apply a default value of 0.
On exiting the normal slide assign that variable with the value of 1 or if you have a button on that slide then you can apply action on that button.
and on enter of the slide you can apply a conditional action.
to check the value of that variable if it is equal to 1 then go to next slide, else continue.
Please check the forum thread: http://forums.adobe.com/message/5156629
Thanks.

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

I deleted my review quiz button!

I deleted my review quiz button on accident...and now i can't get it back. It is not giving me an option to undue. I want the learners to be able to review their incorrect answers after taking the quiz. How can I get it back? Can i add my own?

Check Quiz Preferences, Settings, and check 'Allow users to Review Quiz'. It is an embedded object with a very specific functionality, you will never be able to add a custom button that does the same.

Getting back the review quiz-button

Hello,
Somehow I deleted the review quiz-button that is shown in the Quiz result-slide. How would I get it back? It happened a while back so Ctrl+Z is long gone .
As I can't add any new buttons in a question slide, I can't work it out that way either.
Any ideas?
Kind regards,
Patrik

Check if the option is enabled in Quiz settings:

Retake button gone after Reviewing Quiz

Similar Messages

Maybe you are looking for