Retake Button Navigation

Hello,
1) is there a way, that Retake Button only shows wrong answered questions again for retaking?
2) I have a couple of questions after different chapters, like "Content" -> "Questions" -> "Content" -> "Questions" .... when I hit the Retake Button it starts from first question slide and shows also my content slides again. Is there a way to show only the question slides again for retaking? (like quiz review button).
Thanks for help!

Retake is the only way to have all questions cleared, and no way to have only incorrect answers cleared. You should log a feature request.
As for your second question, that could be done with advanced actions. You'll have to build a conditional action to execute On Enter for each content slide. You'd have to check the system variable cpQuizInfoAttempts. That variable is incremented whenever a new attempt on Quiz level is started. If that variable is greater than 1, that means that you are in the second of later attempt, and then you'll want to skip the content slide. If not, it is the first attempt and you want the user to see the content slide. Hope this makes sense, because I don't know if you already used advanced actions?
The action will be the same for all content slides, which makes it easy. You could also have a jump to the next bunch of question slides on the first content slide, but that means that you'll need a conditional action that will be different for each first content slide. It is up to you.
Lilybiri

Similar Messages

Retake button disappears after Reviewing Quiz

Long time lurker, first time poster...
I have a quiz template that I'm trying to finalize for my department using Cp 5.5 and the retake quiz button disappears if the user reviews the quiz. Is this a settings issue or is it that a user cannot retake a quiz in Cp after reviewing the correct/incorrect answers?
I have the quiz preferences set as follows:
Reporting:
Enable reporting is checked
Standard (SCORM 2004)
Report Status:
Pass/Fail
Report to LMS as:
Score
Choose Report Data:
Quiz Results Only
Reporting Level:
Interactions and Score (although this probably should be changed looking at the settings above)
Settings:
Quiz
Name: Quiz Name
Required: Pass Required
Objective ID: (default)
Interaction ID Prefix: (nothing entered)
Settings:
Shuffle answers (unchecked)
Show Progress (checked)
Allow Backward Movement (checked)
Show Score at the End of the Quiz (checked)
Allow User to Review the Quiz (checked)
Pass or Fail:
Pass/Fail Options:
100% or more of total points to pass
If Passing Grade:
Continue
If Failing Grade:
Infinite Attempts (checked)
Show Retake Button (checked)

hi capSean
i have the same requirement (if learner fails and wants to review, learner should be able to review, then retake quiz) and here's my work-around: instruct learner that if he/she wants to review first, THEN retake, he/she must rewind the course to the beginning. this clears out the answers. on my (SumTotal) LMS settings, i have to allow infinite attempts.
best of luck,
theresa

Retake button does not appear after test review in Captivate 6

Hello All,
I can't figure this out and it is really causing problems.
I have a 20 question quiz randomly pulled from questions pools. I am publishing this as Scorm 2004 and delivering via I SPring scorm compliant LMS.
The requirement to pass is 100%.
On the results slide I have a review quiz button, retake quiz button, and a continue button.
If a user does not pass the first time they either retake the quiz or review the quiz first.
If they review the quiz, when they return to the results slide the Retake quiz button is no longer there, and I cannot seem to come up with a way to make it appear, or reset the quiz for a 2nd attempt.
I have Completed settings to 100% on Quiz.
Pass settings to 100% on quiz.
I am showing the retake button.
I have set it to "Unlimited attempts"
Any suggestions? It seems to lie in the link between reaching the results slide from the review path rather from an attempt path?
Thanks you.

Hello,
Bad news, because that is the way Quizzes are designed in Captivate. Reviewing will disable any future attempts, is meant only to be used after attempts are exhausted. For that reason personally I will hide the Review button by dragging it under the Retake button for quizzes.
Have a look at my blog post about question/score slides (hurry, Posterous will close down soon):
http://lilybiri.posterous.com/question-question-slides-in-captivate
Lilybiri

Retake button gone after Reviewing Quiz

Scenario: You give a user the option to both Review Quiz and Retake Quiz. User chooses Review. When they get to the end of the Review the Retake button is gone. Is there a way to show the Retake button in this situation? Ideally a person could first Review and then Retake.

Unfortunately no. If you flunk the quiz on an attempt (by not achieving a passing score) you get the option to Retake Quiz, but the button doesn't appear if you pass.
If you click the Review Quiz option, you do not get the option to Retake Quiz once you get back to the Quiz Results slide.
I think the basic reasoning behind this is that for a quiz to be a true assessment of the learner's knowledge, they should not be able to just review the quiz, find out all the answers, and then just retake the quiz immediately to answer all the questions. That would be like just giving them the answers for free.
So if you review quiz, you need to relaunch the lesson before you can attempt the quiz again.

No shuffle answers after use the retake button

If I run my project in captivate 5 (using F12 button) and I fail my quiz, the result slide with the retake button appears. By using this button, exactly the same Questions are generated.
( i.e. 3 Random Question Slides linked to a Pool contains 7 Questions, allowed are three attemps). Adobe is not generating new question by using retake button.
Is there any possibility that adobe captivate 5 is generating three new random questions out of the excisting pool by pushing the retake button?
thanks for your support

Hi stefaN,
Here’s the sreenshot. Execute Adncenced action on entering quiz results slide.
First part checks if the user passed the quiz (cpQuizInfoPassFail = 1). Depending on the result one of text messages is shown and Retake button is shown/hidden.

Customise the Retake button in Quiz

How can I make the learners to retake only the questions they have answered incorrectly after they select the retake button from the quiz result slide?

Since the Retake button clears all slides, this is not possible with the default quiz slides and their normal behavior. It is the only way to clear answers, but you cannot filter on correct/incorrect. With custom question slides it is possible, but that is a lot more work.
Lilybiri

New ARB Issue: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
 
 
 
A new ARB issue has been posted to the flex open source site: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
 > contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

ARB Issue Committed: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C62B9EEA.82F3%[email protected]>
Thread-Topic: ARB Issue Committed: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uACeTE1U
In-Reply-To: <C6277898.7F37%[email protected]>
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324878165_1545235"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324878165_1545235
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
the ARB issue at:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+declara
tive+states
has been updated with a decision (in short, keep the status quo).
Ely.
--B_3324878165_1545235
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>ARB Issue Committed: Button navigation and Declarative States<=
/TITLE>
</HEAD>
<BODY>
 
 
 
<BLOCKQUOTE><=
SPAN STYLE=3D'font-size:11pt'>the ARB issue at: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
has been updated with a decision (in short, keep the status quo).
Ely.
B_3324878165_1545235

graf_ix_guru wrote:
>
> Hey everyone I am new, and really could use some help.
> I have created button symbols in Fireworks with Pop-Up
Menus. As of right now
> I have 4 states. The up, over, down and over while down.
Everything is working
> great except when the user clicks on the navigation
button they get taken to
> the top of the page.
On click should open a new page, yes? So it won't matter.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Yet another - Retake Button Missing - WITH PICS!

I read a bunch of threads on the retake button, but still can't solve this one. I included pics to help everyone out. Thanks so much in advance!!
PROBLEM:
Retake button is not displaying.
SCTRUCTURE:
SCORM Course
No points are reported to LMS until the final congrats screen.
PICTURES:
CBT - Quiz Review slide with missing Retake Button (ignore overlapping text. i use a script to determine which phrase to display).
A)   At the end of the quiz, it sends them to 1 of 3 slides, based on my Score variable value:
B) 143 - You are a CHAMPION! slide. On this slide, they click a clickbox that sends 2 points to LMS, marking them passed with perfect score. CBT ends, marking them passed in LMS.
C)   112 - 128 - You are a MASTER! slide. On this slide they click a clickbox that sends 1 point to LMS, marking them passed. User has choice to advance to Quiz Results Slide, if they want to retake the quiz to try to earn a CHAMPION score. If not CBT ends, marking them passed in LMS.
(Notice how results are only reported to the LMS at the end of the MASTER or CHAMPION branching.)
D)   0 - 111 Quiz Results Slide, where they should see a retake button.
E) Retake button Quiz Results Slide in slideshow
F) Retake button is enabled in settings, with infinite chances.
G) Quiz set to optional.
H) This is an example of the You are a MASTER! slide. They have to click the click box to see their Master score. Clicking the click box sends 1 pt to the LMS, marking them as passed.
I) If someone does not score high enough (using our custom Score variable), they skip the MASTER and CHAMPION slides that have the click box that reports to the LMS. They go straight to the View Quiz Results Slide with the Retake button.

Making progress...
I had to change the points for all the Question Slides to 0. Even though they are set to NOT report to the LMS, they were counting towards the quiz score. Once the quiz score got above 1 (which is the passing score), the retake quiz button did not show. I changed all the questions slides from 10 points to 0.
REMAINING PROBLEM:
Now, I still can't think of a way to let the user retake the quiz when they achieve MASTER status. MASTER status marks them as passed, but I want them to click the Retake Quiz button to start over and try to earn the perfect CHAMPION status.

Simple button navigation script

This question is so simple-I can't really find the answer
anywhere, but as a complete NooB I have no idea how to make this
work. I have a nested movie 1 layer down from main stage that has
several navigation buttons that move to different main stage
labeled frames. I get an 1120 error because I am somehow not
calling them out on the script. I have named the instances..so
that's not the problem. I think I just need to somehow direct the
script to the nested location. If I move the buttons to the main
stage I get no errors and it all works perfectly. Please help.
Here's a sample script for the button:

ok..not to mix things up but here's the instance name of
button I'm currently working on: "buttonbio".
It's located in a mc called "movFilmbackground". I'm trying
to get the playhead to go to the frame label "bio" on the main
stage.
If I put the first code in...on the main stage at the
beginning of the timeline, nothing happens when I try the button...
If I put the second code in.. I get 1120 error.."access of
undefined property buttonbio" & 1180 error "call to possibly
undefined method movFilmbackgound"
CODE

I've got a new computer with windows 7 & i downloaded firefox yesterdayerday. there are no menu buttons/navigation buttons showing up.

i downloaded firefox yesterday. it is only showing maps4pc and googlechrome. there are no navigations tabs. i don't want the above two features. i only want plain simple firefox with navigation tool bar. everything i tried to fix the issue following instrurctions on the support pages didn't solve the problems. thanks

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

LOV button navigation in multi row block

We have two fields in a multirow block, Role Type and Parent Role Type(which is a LOV button). When the current row selector is on a Role Type row all Parent Role Type LOV buttons for all the rows change only the current selected row. With Designer we set Keyboard/Mouse navigable properties to Yes(in the OLB) which fixed it but with Headstart these properties do not fix this problem. Any info and suggestions would be appreciated. Thanks.

Ok, now I understand.
Unfortunately, you have run into some standard forms behavior that doesn't work the way you want it to. The LOV button is not navigable, because your cursor needs to be sitting in the data item when the call to the LOV is made. Since this button is not navigable, the cursor will not move to the current record when you press the button. (Actually, the button is identical on each record.)
Possible solutions:
1 - use only 1 button in an overflow below. (Create your own action item instead of using the LOV button preference.)
2 - don't use a button at all. (Headstart provides the LOV toolbar button.
3 - Try generating the lov as a poplist. (See Oracle Designer online help).
4 - Use the new Oracle Look and Feel (available only on the web) to create a button in the field ('...').
Regards,
Lauri

Buttons navigation

I'm just getting started using Flash Builder and need some help. Is there a way for me to make a button that will send a user to a different screen randomly. I'm a teacher and trying to create a math app for my students, where after there answer a question correctly, it sends them to the next question at random. Here is the code I have thus far, but it will only send them to the next question. Thanks for any help!
<s:Button x="324" y="273" label="Next Question"
 click="navigator.pushView(question2)" styleName="back" />

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
 <![CDATA[
 var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
 function buttonClickHandler(event:MouseEvent){
 var randomProblem:int = Math.floor(Math.random()*(questionsArray.length)); //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
 navigator.pushView(questionsArray[randomProblem]);
 ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Button Navigation Problems

Hi, I'm having a frustrating problem when copying/pasting buttons. Its probably a bit unusual but here goes. I'm a composer and I'm creating a showreel for my music and soundtracks, so I needed the dvd to have a page with numerous audio tracks that the viewer could click and listen to. The only way I could find to achieve this was to have duplicate pages linked to each other that each had a different background track. For example, you see a menu with tracks 1 through 10, when you click track 1, nothing appears to happen but you actually go to an identical menu that plays track 1 in the background. My problem is that when i copy and paste the identical buttons from one page to the next, the navigations (up, down, left, right) don't copy. I update these tracks fairly often so its a lot of tedious work every time. Suggestions greatly appreciated.

If you select the items in the menu, then Command C, go to the other menu (make sure to click on it) then Command V it should carry through.
What I would so is set the first menu with proper navigation and color schemes for the menu.
Then duplicate the menu 20 times
On the 19 copies delete all the buttons, then set links in the buttons for the first menu, then copy and paste buttons as above, it saves the navigation
Download this file
Buttons Zip File
I made menu 1, duplicated it 3 times, set the links in menu 1 buttons, removed the other buttons, copied from menu 1 then pasted.
It actually took more time to write that last section than do it so it is pretty quick.
Note that UP/LEFT press takes you backwards and RIGHT/DOWN goes forward (numerically) then cycles from 4 to 1 or 1 to 4 when the end is reached

Button navigation musical chairs

I am running into a nightmare trying to set the navigation direction within a title that include 5 chapter menus. I will go through each of the buttons and set the direction, but once I am done, and double-check the buttons, the navigation is nothing like I set. Occasionally, some of the setting stick, but most often, I am going back through the setting again to re-set.
I'm not sure if this makes any sense, as I feel like I am not describing the problem very well. I am hoping it's a common issue, or a simple operator error.
I would be most appreciative of any insight into what I might be doing wrong. Please post any further questions if the issue I'm having isn't described very well.
Thanks!
Van Grafton

Have a look in the 'Settings' drop down box and make sure the 'Auto Assign Buttons' is not checked. If it is then every time you move a button or make a change it will force DVDSP to reassign the navigation, overwriting your changes. If it's checked, just click on it again to remove the check and try to assign your navigation manually again.
Another 'feature' of this setting is that on complex menus with lots of buttons it causes the app to run like treacle on a cold day any time you make a small adjustment to the position of a button. I tend to turn it off except for simple projects, and use the 'Assign Now' option instead.

Retake Button Navigation

Similar Messages

Maybe you are looking for