Retiming moves my audio clips

I am trying to make a movie to demonstrate some software at work.
So, I ran the software features I wanted to show using screen capture. Now I've got my video. Then I wrote a script and used the Record Audio tool to create a series of audio clips in sequence. These clips are often "attached" to various video clips in my timeline by some mysterious rule I haven't figured out.
What I want to do is use retiming to pause the video in various places while I wax eloquent in the audio. The problem is that as soon as I add another Hold section (Shift H), all of the previous audio clips move seemingly at random. They are all over the place. I can understand the audio clips that fall later in the timeline moving maybe, but not the ones earlier in the sequence that were all just fine.
I would like to detach the audio clips from the video clips so that whatever I do to the video, the audio just lays there not stretched, not moved, not anything.
How do I do this?

While it took me a while to read up on secondary storylines, this is just what the doctor ordered. This has really taken the sport out of the whole thing.
I'm in your debt forever!
Thank you.
For those that don't know, to create a secondary storyline, you just select a number of clips (video or audio), then right click and choose "Create Storyline". Now both clips are embedded into a gray box. And all of the relative positions within this storyline stay fixed no matter what happens outside.

Similar Messages

FCP 6 - Exporting Quicktime MOV distorts audio (clipping), plays fine in FC

I've just finished a project and have exported my finished video to a Quicktime file, using the same settings as my original capture (HDV 1080i50). However, when I do so, the audio in the exported file is clipped quite horribly, and makes it hard to make sense of what is going on because of it.
I have several sound files that have been amplified +9dB in the project, and was originally worried about clipping, but they play back absolutely fine in Final Cut, with no distortion at all.
Any ideas on how to remove this clipping on export? If I have to reduce the sound level on my clips, is there a way to do it via batch? I've got heaps of keyframes controlling volume, it would be an absolute pain to do manually.

Keep your audio peaks between -12 and -6 inside FCP. Never, ever clip the audio. Use of some compression and/or limiting - if done correctly - will help you control your levels: Putting a lid on loud stuff and bringing up the level of low stuff. And does a better job of level control than manually riding-gain with a fader or inserting audio level keyframes.
Compressors will help you.
Search the web for tutorials on how to use 'em and you'll never look back.
John

Firefox 5.01 will play QuickTime movie and audio clips once, but then will not be able to repeat the movie or audio clip again after it initially plays. This did not happen in earlier versions of Firefox before 5. Is there a fix?

I am on a Mac using system 10.6.

Thanks for your response. While this may work with audio and video originating from your own computer it doesn't seem to effect audio and video viewed from the Firefox 5.01 browser which uses a QuickTime plugin. Audio and Video viewed from Safari and Firefox 3.6.19 work fine which leads me to believe the QT plugin and Firefox 5 browser are not working correctly.

Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
So, what happens is this:
1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
Mandatory system info:
Windows 7 Professional SP1 (64-Bit)
Intel i7-3820
32GB RAM
Nvidia GTX 980 (350.12)
Premiere Pro CC 2014.2

Update:
I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
Pretty bizarre.
The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

How do you move the point where an audio clip attaches to a video clip?

I'm talking about the little carrot that sticks from one clip to another to indicate the point where the cips are syncronized. How do you move their position? Thank you!
Eric

The manual says ...
Adjust the connection point of a connected clip
By default, connected clips and storylines are connected to the primary storyline at their first frame, but you can move the“connection point” of a connected clip or storyline. This is useful when you want to connect a specific frame or audiosample in the connected clip or storyline with a specific frame or audio sample in the primary storyline.
Hold down the Command and Option keys, and click the connected clip (or the gray border of the storyline) at thepoint where you want to position the connection point.
The connection point is moved to the point where you clicked.
For other things ... If you want to move the audio clip in relation to the video clip just click on it and drag it to the left or right. This is when your audio clip is a separate clip from your video clip. If you want to move the audio that is part of a video clip, you first have to select that clip then choose Clip/Break Apart Clip Items then do one of the things listed above. Best wishes.

Moving Audio Clip less then 1 frame in Premiere

Is it possible to move an audio clip less then one frame in premiere CS4. I recorded and then remixed in Audition 3. Live concert was also recorded in HDV on a Canon hv30. I want to use the remixed audio with the video footage in place of the camera audio. It was recorded hdv 30P so one frame is a significant amount of time from the audios point of view. The audio and video are about half a frame apart. The only thing I can think of is take the audio back into audition and shorten the lead in by the required amount. I was hoping for a easier way.
Any thoughts would be greatly appreciated.
Ken

Ken,
Glad that it did work for you. Now, there are still some frame-specific things that can and cannot be done, as PrPro is frame-based, but for your need, it sounded like a good solution.
Thanks for reporting success,
Hunt
PS so you can mark your question as having been answered, right?

Can no longer select or move audio clips on Narration track - what happened??

I began my first Adobe Premiere Elements 11 project this morning, a short video (5 mins) I intend to upload to YouTube. It's a comedy sketch involving inanimate objects that "talk", so it requires a lot of dialogue to be added to, in this case, the Narration track.
I am not new to Premiere Elements. In fact, I've done quite a bit of fairly complex editing on previous versions of the software (I upgraded to 11.0 from 8.0). I've never had this problem before.
After editing this project for well over 2 hours with no problem, I can suddently no longer move or even select any audio clip on my Narration track. They are just frozen and stuck there. Everything else works normally. I can select and move all other clips on all other tracks. Further, all audio clips will play, even the ones on the Narration track. However, I can no longer move, select, or even add any clip to the Narration track.
I opened a new project to see if the problem persisted, but it didn't - I could add, select, move audio clips on the Narration track just fine.
I'm stuck and bewildered. The project I've already invested 2-3 hours into seems permanently broken. The audio clips on my Narration track will play, but I can't select, move, or otherwise do anything to them.
My fear is not just that I'll have to start this project over again, but I'll never know when it will break again, and I'll lose all my work again.
Help!
Seriously, does anyone know what's happened?

sleinbach
Thanks for the details. As I suggested this idea that I had after reading this thread may be just nonesense, but I thought it would be interesting to try.
This is recommended done with a copy of the project that you have now.
For now, let us assume that the missing track names are part of the locked Narration Track syndrome. I am not sure if your narration clip was generated in Premiere Elements narration feature or created elsewhere and brought into the program. That would be interesting information to have. But, nonetheless, moving forward with this idea.
Given you cannot move, delete, change, etc what is on this Narration Track. Whatever is on that Narration Track traces back to an original on the hard drive and probably is shown in Media Cache's (Adobe Folder) as conformed audio cfa and pek set.
a. Find the narration hard drive hard location and move it to a new location (special folder on hard drive). When you go back to the copy of the problem project, you should be greeted with one of those "Where is....?" messages. Cancel out of that. Do not do anything within that message dialog.
b. Right click the thumbnail for your narration in Project Media and select Replace Footage. Then browse to and select the original that you had moved to the computer desktop and the special folder there.. Click OK. That should restore the file (including whatever effects were made to the file) to the project.
c. Has any of that had any effect on unlocking the Narration Track?
Other maneuvers to try
a. Trying to locate and delete any cfa or pek files associated with the problem audio.
b. Switching to an Aero Theme for Windows if you do not have one set so far.
Thanks for giving all of that a look at.
ATR

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

When I move video clip, my audio clips (unlinked) split ??

I have separate video and audio clips on the timeline (they are not linked). When I try to move a video clip (or multiple clips at one time), before I let go of the mouse, the audio clip(s) below the video split, so that they are before and after the moved video clip. They are not linked together. How do I move a video clip without affecting anything else?
Thanks.

This might be helpful from some of my old notes. The ripple behavior can be overcome by the use of the CTRL
button. However it depends on whether you press CTRL before or after you start moving the clip. When moving clips
around in the timeline there are 4 basic types of movement Lift, Extract, Insert and Overlay:
The first two, Lift and Extract have to do with how the clip is moved OUT of it's current position. To see what I
mean, hover your mouse over a clip in the timeline, then press and release the CTRL key while watching the status
text string in the lower left of the application window, you'll see that holding CTRL before clicking and dragging
triggers the extract behavior (which tells the timeline that there is a gap being created that should be closed)
but clicking and dragging with no CTRL modifier allows the Lift behavior (which tells the TL to ignore the gap)
The second two, Insert and Overlay have to do with how the clip is placed IN to it's new position, that is,
whether it is Overlaid over exisitng footage without any ripple movement or Inserted within the existing footage,
causing any following media (including that on other tracks) to be rippled forward.
Since there is no way to lock down tracks in PE, you must always be mindful of what this default rippling behavior
is doing to overlapping media on other tracks.

Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?, Facebook has challenged the copyright of a movie using iMovie audio

Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?

Just curious as to why it's coming up as a copyright violation?
Hard to say. I think FaceBook errs on the side of abundance caution when they detect anything that sounds like music.
It's also possible to that people use samples of various pieces of iLife audio contest to create a piece of work that they then copyright.
Matt

I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

Hello everyone,
This is Karie Garnier in British Columbia, Canada.
I'm new to FCPX.
I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
How can I select this invisible audio clip and delete it?

I think you could be right, that it's an old render file that's got stuck.
By the time I finished this movie my 500 GB hard drive was 99.9% full and
FCP started acting wierd, so I suspect you are right.
I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
glitch remains.
Can you please tell me:
a) How can I fix the old render file so that it is no longer stuck? ... and
b) How do I take a screen shot of the timeline?

Can one cut and paste an audio clip within a movie to use in another place?

can one copy and paste an audio clip within a movie to use in another place? Any help would be appreciated. Thanks

If you are wanting to use the audio from clip A into clip B then try......
First check that Advanced tools are enabled: iMovie>Preferences>General>Show Advanced Tools.
Drag clip A from the Event UPON clip B in the Project. When you release the mouse you will get a pop up menue.
Select Audio Only. Note the other options for another day!!!!
You will get a green bar as Karsten mentions above ( move it , shorten it etc, etc.)
Show Audio Waveform by selecting Blue Waveform Box ,bottom right of Project Window.
You can adjust audio level from clip A and clip B to your requirements.You can set either to zero volume if you require.
This may not be what you meant by "to use in another place "
If you want just the audio to use outside of iMovie, try;
With the required clip/clips only in the project> Share> Export Using Quicktime and in Export Select "Sound To AIFF. Save to desktop in the first instance so you can easily find it.

Cant move audio clips around in the timeline? Help?

When my clips are in the timeline in iMovie 11, after a few times of moving them around, it suddenly stops allowing me to move the clips around anymore. Any Ideas?

Well basically, I will import a .mp4 video file into the timeline and then I will import an audio file in from itunes. After a couple of trys to sync the imported audio file and the video up correctly, it just decides to not let me move the imported audio clip around anymore in the timeline. Any ideas? and thanks for the responce.

Can't Move Audio Clip

I need to shift and audio clip and I can't move it. There is a gray line a the top of the clip that does not appear on other clips, but I don't know what this means. I can shorten or lengthen the clip, but I can't move it. At the far right top is a button that indicates that I can speed up or slow down the clip and this button doesn't appear on the other clips. Occasionally a box pops up to let me say if this is a custom or a present and it currently is custom at 100 percent. The clip is highlighted in yellow, which would seem to indicate I can move it, but I can't. I'd appreciate help on how to fix this.
Thanks.

hmmm... It seems to be a new big problem, I'm having the same issue...
But with iMovie HD 6
I'm using Mavericks and I import a movie file into iMovie HD, then an audio file (I've tried mp3 and aiff) and both play, video and audio. Then I have to edit the audio file to sync with the video, and then is when iMovie HD freezes.
I've deleted the preferences (now iMovie opens only the menu, but the project doesn't appear at all, only that colourful loading icon forever ) I've repaired the permissions restarted every single time and still nothing...
IS THERE ANYONE TO help us out, please?
Rubia

Audio clips in a director movie

I have several small quicktime audio clips that I created and exported out as .mov and mp4 files to use in a dir movie. I was hoping to create a button and set a behavior so that when I clicked on the button it would trigger the audio clip to play. Simple, so I thought. It doesnt work. I have been scouring through the manuals and books that I have to find a procedure/solution to make this work. Can someone help me?
The concept / idea is a text question appears on the stage and you click a button under the question labeled "answer" and the audio clip plays the answer, and so on down the list of questions.
I am new to Director and trying to learn as I go. Is it the audio format? I brought the quicktime audio files in and they are only 508kb which is great. I recorded the same audio in Director using the insert > audio feature and the same file was 15mb, not great, to big.
If it matters, Im using Director 11 on an intel macbook pro.
Any help would be appreciated.
Joe

The easiest way to play sound would really be to use sound files instead of quicktime or mp4 video files which are setup with aurio and no video (which is what I think you are doing). Generally, an audio file would be .mp3 or .wav. There are many many free programs to convert quicktime files to mp3, and that is the approach I would recommend. To play an audio file where the member name is "mySound", would take this line of code:
puppetSound mySound
Alternately you can use the sound.play() command (look it up in the docs for syntax). If you insist on using Quicktime members, then you must realize that the target computer that will be playing your projector must have quicktime installed. So, if you are targetting PCs, you will need to make sure that everyone who uses your program installs Quicktime.
It is more complex to play the QT file as well, since you will need to put the member on the stage in order to address it.
So, your best bet is to use audio files, not video files, if you plan on just playing audio.

Retiming moves my audio clips

Similar Messages

Maybe you are looking for