Retina 2012 Performance Issues
Hi guys,
I run a Retina 2012 model w/ 16GB of ram + Win 7 Bootcamp. Switched thermal paste today and got rid of all dust in the fans. Slight improvement in heat (10-20c), but not really in performance.
The issue lies here: games (yes games... no pc vs mac debate, please. I use both. Tired of hearing about it).
I could run i.e Diablo 3 even with retina resolution previously, or far cry 3 almost maxed. Now I can barely play any games smoothly. Even path of exile on super low settings jerks and lag spikes.
I've zapped the PRAM and reset the SMC many times. Still the same. I changed thermal paste as its been 3 years since I got the mac. Still the same. I fixed all settings for NVIDIA towards performance, updated the drivers and turned off things in windows that hog resources. Still the same.
Is there something I'm missing? The performance should be better than it currently is :/ it was better... yeah the machine is soon 3 years old, but should the health of it decline so quickly?
Assuming that you have MacBook Pro (Retina, 15-inch, Mid 2012) - Technical Specifications, the GT650M has the following (and some more on the website).
You should consider the next version, after you find out what you currently have installed.
Similar Messages
-
Mac Book Pro Retina 2012 Battery Issue
guys i wanted to ask about the mac book pro retina 2012 battery issue
is it best to leave the laptop plug in charging all the time or let the laptop battery to have a full cycle all the time?
my usage is mainly autocad and photoshop.
i also have window 7 install on boot camp to play battlefield 3
my mac book aged 12 weeks adn the battery loadcycles is 78
Battery Capacity : 8259mAh
Design Capacity : 8460mAh
i also read on apple support saying it's advicable not to leave the laptop charge in. i ask on some forum some plug in all the time some perform full cycle.
so which is the best procedure ( plug in all the time / perform full cycle ) so that the battery can last for 5 years.Edmund CWH wrote:
so what you're saying is for heavy usage plug in the charger
for light usage like web browsing, listneing songs, check mail,etc use battery right?
You're right
what's the best ideal to drain the battery ( use the battery until how many percentage ) 5% or 20% then charge it.
in malaysia the reseller says 5%. but some says 20%
I recommend to charge it at 20% and use all the battery until your Mac shuts down at least once a month. With this, you'll have a healthy battery -
SQL Services 2012 Reporting Services Performance Issue - PowerView
Power view Reports are loading very slow while opening in SharePoint 2013, it is taking more than 15 secs. It is development environment, maximum 10 users , no traffic at all but still not sure why it is taking such long time.
We have 2 servers in SharePoint farm one is for SharePoint and other is for SQL. I have gone through the logs in reporting database, attached the same below. Can you please help me what we can say from the sheet attached ,whether it is slow or fast. Or where
we are having issue.
SQL server version is SQL 2012 SP2.
SharePoint 2013 is RTM.
Gone through the below blogs but no luck.
http://blogs.msdn.com/b/psssql/archive/2013/07/29/tracking-down-power-view-performance-problems.aspx
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ed01ff4-139a-4eb3-9e2e-df12a9c316ff/ssrs-2008-r2-and-sharepoint-2010-performance-problems
Thanks.
Thanks, Ram ChHi Ram Ch,
According to your description, your have performance issue when running your Power View report. Right?
In this scenario, based on your screenshot, it takes long time on data retrieval. How is the performance when executing the query in SQL Server Management Studio? Since you mention there's no traffic at all and 15 seconds will not cause query
time out, we suggest you optimize the query for retrieving data. Please refer to links below:
Troubleshooting Reports: Report Performance
Please share some detail information about the data query if possible. Thanks.
Best Regards,
Simon Hou -
Performance issue SCSM 2012 R2
Hellol
We have SCSM 2012 R2 (no RU), we have a performance issue, when we set implemener for Manual Activity and press OK, CPU utilization raises to 25-30% for 1,5 minutes and during this period console is not working. What can be a reason of it? On the SQL Servers
(CMDB) there are enough resources, servers are virtual (cluster mode). How can we investigate this issue? SCSM is not used in the production yet.
Disabled 4 subscriptions for manual activity, but did not help.In the UR2/UR3 of SCSM 2012 R2 is a console performance fix. You should consider to install the latest UR and give it a try again.
Andreas Baumgarten | H&D International Group
We installed UR3 today and problem is not solved, also we defined problem more clear, it happens when we specify user AD login without pressing check button even.... also same problem when we press "..."button to find AD users. So problem not when
we save MA, it is related to searching AD users. SQL servers have 8 cores each, cluster mode, enough free space. "Users" tab shows ~57 000 user accounts. -
Service Manager 2012 SP1 consoles hanging or slow performance issue in Virtual Environment
Hii,
We are facing SCSM SP1 console performance issue which is utilizing high CPU and working deadly.
For information, our SCSM is in Virtual environment via Hyper-V.
When running the console over an RDP session to a Hyper-V virtual machine, we have to be careful not to maximize the console so that it will remain fast. If we maximize on the VM, the console is so slow as for it to be unusable.
Can someone share his experience, please?
Regards, Syed Fahad AliHi Sayed,
This is a bug and hopefully Microsoft team will solve it soon. if you can to vote for this bug here
https://connect.microsoft.com/WindowsServer/feedback/details/810667/scsm-console-consumes-a-lot-of-cpu-when-opened-maximized-on-work-item-view-like-all-incidents
Mohamed Fawzi | http://fawzi.wordpress.com -
My screen flickers in Safari MacBook Pro Retina 2012
My screen flickers in a totally random fashion and only in Safari when I am on the internet. It happens more or less on certain web pages and not very often, but it is very annoying when it does happen. My machine is a Macbook Pro Retina 15" late 2012 release. I have seen other posts on this issue dating back to 2012, however, there were not solutions submitted leaving me to believe that there is no solution or I may have missed it. People with the same problem say they have taken in their laptops to have them replaced by Apple only to find out their problem still exists, leading many to believe it's likely to be a software issue. Anyone have any ideas or answers to this issue?
Hey dhaynes3818,
Thanks for the question. I understand that you are experiencing issues with Safari on your MacBook Pro. To troubleshoot these issues, lets follow the steps in this article:
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
http://support.apple.com/en-us/HT203353
Thanks,
Matt M. -
Performance Issues with Photoshop CS6 64-Bit
Hello -
Issue at hand: over the course of the last few weeks, I have noticed significant issues with performance since the last update to PS CS6 via the Adobe Application Manager, ranging from unexpected shut downs to bringing my workstation to a crawl (literally, my cursor seems to crawl across my displays). I'm curious as to if anyone else is experiencing these issues, or if there is a solution I have not yet tried. Here is a list of actions that result in these performance issues - there are likely more that I have either not experienced due to my frustration, or have not documented as occuring multiple times:
Opening files - results in hanging process, takes 3-10 seconds to resolve
Pasting from clipboard - results in hanging process, takes 3-10 seconds to resolve
Saving files - takes 3-10 seconds to open the dialog, another 3-10 seconds to return to normal window (saving a compressed PNG)
Eyedropper tool - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempting to navigate any menu - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempts I've taken to resolve this matter, which have failed:
Uninstalled all fonts that I have added since the last update (this was a pain in the ***, thank you Windows explorer for being glitchy)
Uninstall application and reinstall application
Use 32-bit edition
Changing process priority to Above Normal
Confirm process affinity to all available CPU cores
Change configuration of Photoshop performance options
61% of memory is available to Photoshop to use (8969 MB)
History states: 20; Cache levels: 6; Cache tile size: 1024K
Scratch disks: active on production SSD, ~10GB space available
Dedicated graphics processor is selected (2x nVidia cards in SLI)
System Information:
Intel i7 2600K @ 3.40GHz
16GB DDR3, Dual Channel RAM
2x nVidia GeForce GTS 450 cards, 1GB each
Windows 7 Professional 64-bit
Adobe Creative Cloud
This issue is costing me time I could be working every day, and I'm about ready to begin searching for alternatives and cancel my membership if I can't get this resolved.Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16350 MB
Free memory: 12070 MB
Memory available to Photoshop: 14688 MB
Memory used by Photoshop: 61 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 4.2.1
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 1024 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTS 450/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 3
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Video Card Number: 2
Video Card: LogMeIn Mirror Driver
Driver Version: 7.1.542.0
Driver Date: 20060522000000.000000-000
Video Card Driver:
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: LogMeIn Mirror Driver
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Serial number: 90970233273769828003
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\ANDREW~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.8G, 7.68G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.1
Camera Raw Filter 8.1
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Performance issue with pl/sql code
Hi Oracle Gurus,
I am in need of your recommendations for a performance issue that I am facing in production envrionment. There is a pl/sql procedure which executes with different elapsed time at different executions. Elapsed Times are 30minutes , 40 minutes, 65 minutes , 3 minutes ,3 seconds.
Expected elapsed time is maximum of 3 minutes. ( But some times it took 3 seconds too...! )
Output on all different executions are same that is deletion and insertion of 12K records into a table.
Here is the auto trace details of two different scenarios.
Slow execution - 33.65 minutes
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 1,712,343 1,712,342.6 41.4
CPU Time (ms) 1,679,689 1,679,688.6 44.7
Executions 1 N/A N/A
Buffer Gets ########## 167,257,973.0 86.9
Disk Reads 1,284 1,284.0 0.4
Parse Calls 1 1.0 0.0
User I/O Wait Time (ms) 4,264 N/A N/A
Cluster Wait Time (ms) 3,468 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 6 N/A N/A
Invalidations 0 N/A N/A
Version Count 4 N/A N/A
Sharable Mem(KB) 85 N/A N/A
-------------------------------------------------------------Fast Exection : 5 seconds
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 41,550 41,550.3 0.7
CPU Time (ms) 40,776 40,776.3 1.0
Executions 1 N/A N/A
Buffer Gets 2,995,677 2,995,677.0 4.2
Disk Reads 22 22.0 0.0
Parse Calls 1 1.0 0.0
User I/O Wait Time (ms) 162 N/A N/A
Cluster Wait Time (ms) 621 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 55 N/A N/A
Invalidations 0 N/A N/A
Version Count 4 N/A N/A
Sharable Mem(KB) 85 N/A N/A
-------------------------------------------------------------For security reasons, I cannot share the actual code. Its a report generating code that deletes and load the data into table using insert into select statement.
Delete from table ;
cursor X to get the master data ( 98 records )
For each X loop
insert into tableA select * from tables where a= X.a and b= X.b and c=X.c ..... ;
-- 12 K records inserted on average
insert into tableB select * from tables where a= X.a and b= X.b and c=X.c ..... ;
-- 12 K records inserted on average
end loop ;1. The select query is complex with bind variables ( explain plan varies for each values )
2. I have checked the tablespace of the tables involved, it is 82% used. DBA confirmed that it is not the reason.
3. Disk reads are high during long execution.
4. At long running times, I can see a db sequential read wait event on a index object. This index is on the table where data is inserted.
All I need to find is why this code is taking 3 seconds and 60 minutes on the same day and on the consecutive executions ?
Is there any other approach to find the root cause of this behaviour and to fix it ? Kindly adivse.
Thanks in advance your help.
Regards,
Hari
Edited by: BluShadow on 26-Sep-2012 08:24
edited to add {noformat}{noformat} tags. You've been a member long enough to know to do this yourself... so please do so in future. ({message:id=9360002})Hariharan ST wrote:
Hi Oracle Gurus,
I am in need of your recommendations for a performance issue that I am facing in production envrionment. There is a pl/sql procedure which executes with different elapsed time at different executions. Please reedit your post and add some code tags around the trace information. This would improve readability greatly and will help us to help you
example
{<b></b>code}
select * from dual;{<b></b>code}
Based upon your description I can imagine two things.
a) The execution plan for the select query does change frequently.
A typical reason can be not up to date statistics.
b) Some locking / wait conflict. For example upon a UK index.
Are there any other operations going on while it is slow? If anybody inserts a value, then your session will wait, if the same (PK/UK) value also is to be inserted.
Those wait events can be recognized using standard tools like oracle sql developer or enterprise manager while the query is slow.
Also go through the links that are in the FAQ. They tell you how to get better information for makeing a tuning request.
SQL and PL/SQL FAQ
Edited by: Sven W. on Sep 25, 2012 6:41 PM -
Performance issue with two unbanalnced hierarchies in a single report
Hi All
We are facing the performance issue with one of the report which houses two unbalanced hierarchies (having 18 levels) - skipped & ragged. Basically its a part of OBIAPPS financila analytics .
The query is below :
Could anyone let me know how to improve the performane. Any parameter that should be looked at while using unbalanced hierarchies.
WITH SAWITH0
AS ( SELECT SUM (T91707.OTHER_LOC_AMT) AS c1,
MAX (T314768.HIER2_CODE) AS c2,
MAX (T314768.HIER3_CODE) AS c3,
MAX (T314768.HIER4_CODE) AS c4,
MAX (T314768.HIER5_CODE) AS c5,
MAX (T314768.HIER6_CODE) AS c6,
MAX (T314768.HIER7_CODE) AS c7,
MAX (T314768.HIER8_CODE) AS c8,
MAX (T314768.HIER9_CODE) AS c9,
MAX (T314768.HIER10_CODE) AS c10,
MAX (T314768.HIER11_CODE) AS c11,
MAX (T314768.HIER12_CODE) AS c12,
MAX (T314768.HIER13_CODE) AS c13,
MAX (T314768.HIER14_CODE) AS c14,
MAX (T314768.HIER15_CODE) AS c15,
MAX (T314768.HIER16_CODE) AS c16,
MAX (T314768.HIER17_CODE) AS c17,
MAX (T314768.HIER18_CODE) AS c18,
MAX (T314768.HIER19_CODE) AS c19,
MAX (T314768.HIER20_CODE) AS c20,
T314768.HIER1_NAME AS c21,
T314768.HIER1_CODE AS c22,
T314914.HIER1_NAME AS c24,
T314914.HIER10_NAME AS c25,
T314914.HIER11_NAME AS c26,
T314914.HIER12_NAME AS c27,
T314914.HIER13_NAME AS c28,
T314914.HIER14_NAME AS c29,
T314914.HIER15_NAME AS c30,
T314914.HIER16_NAME AS c31,
T314914.HIER17_NAME AS c32,
T314914.HIER18_NAME AS c33,
T314914.HIER19_NAME AS c34,
T314914.HIER2_NAME AS c35,
T314914.HIER20_NAME AS c36,
T314914.HIER3_NAME AS c37,
T314914.HIER4_NAME AS c38,
T314914.HIER5_NAME AS c39,
T314914.HIER6_NAME AS c40,
T314914.HIER7_NAME AS c41,
T314914.HIER8_NAME AS c42,
T314914.HIER9_NAME AS c43,
T314914.HIER20_CODE AS c44,
T314914.HIER1_CODE AS c45,
T314914.HIER10_CODE AS c46,
T314914.HIER11_CODE AS c47,
T314914.HIER12_CODE AS c48,
T314914.HIER13_CODE AS c49,
T314914.HIER14_CODE AS c50,
T314914.HIER15_CODE AS c51,
T314914.HIER16_CODE AS c52,
T314914.HIER17_CODE AS c53,
T314914.HIER18_CODE AS c54,
T314914.HIER19_CODE AS c55,
T314914.HIER2_CODE AS c56,
T314914.HIER3_CODE AS c57,
T314914.HIER4_CODE AS c58,
T314914.HIER5_CODE AS c59,
T314914.HIER6_CODE AS c60,
T314914.HIER7_CODE AS c61,
T314914.HIER8_CODE AS c62,
T314914.HIER9_CODE AS c63
FROM W_HIERARCHY_D T314768 /* Dim_W_HIERARCHY_D_Segment11 */
W_GL_SEGMENT_D T315677 /* Dim_W_GL_SEGMENT_D_Segment11 */
W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
WHERE ( T91397.ROW_WID = T91707.GL_ACCOUNT_WID
AND T91397.ACCOUNT_SEG11_CODE = T315677.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG11_ATTRIB = T315677.SEGMENT_LOV_ID
AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
AND T314768.HIER_CODE = T315677.SEGMENT_LOV_ID
AND T314768.HIER_NAME = T315677.SEGMENT_LOV_NAME
AND T314768.HIERARCHY_ID = T315677.SEGMENT_VAL_CODE
AND T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
AND T315677.SEGMENT_LOV_NAME =
'Responsibility_Centre_Functional'
AND T315677.SEGMENT_LOV_ID = 1000163
AND T315731.SEGMENT_LOV_NAME = 'Account_Master'
AND T315731.SEGMENT_LOV_ID = 1000165
AND ( T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER11_CODE IS NULL)
AND (T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER12_CODE IS NULL)
AND ( T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER8_CODE IS NULL)
AND ( T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER9_CODE IS NULL)
AND ( T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER10_CODE IS NULL)
AND ( T314914.HIER1_CODE IN ('ALL_LI')
OR T314914.HIER2_CODE IN ('S000000001')
OR T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022'))
AND ( T314914.HIER2_CODE IN ('S000000001')
OR T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER2_CODE IS NULL)
AND ( T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER3_CODE IS NULL)
AND ( T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER4_CODE IS NULL)
AND ( T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER5_CODE IS NULL)
AND ( T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER6_CODE IS NULL)
AND ( T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER7_CODE IS NULL)
AND T314768.HIER1_CODE IS NOT NULL
AND T314914.HIER20_CODE IS NOT NULL
AND T314914.HIER13_CODE IS NULL
AND T314914.HIER14_CODE IS NULL
AND T314914.HIER15_CODE IS NULL
AND T314914.HIER16_CODE IS NULL
AND T314914.HIER17_CODE IS NULL
AND T314914.HIER18_CODE IS NULL
AND T314914.HIER19_CODE IS NULL)
GROUP BY T314768.HIER1_CODE,
T314768.HIER1_NAME,
T314914.HIER1_CODE,
T314914.HIER1_NAME,
T314914.HIER2_CODE,
T314914.HIER2_NAME,
T314914.HIER3_CODE,
T314914.HIER3_NAME,
T314914.HIER4_CODE,
T314914.HIER4_NAME,
T314914.HIER5_CODE,
T314914.HIER5_NAME,
T314914.HIER6_CODE,
T314914.HIER6_NAME,
T314914.HIER7_CODE,
T314914.HIER7_NAME,
T314914.HIER8_CODE,
T314914.HIER8_NAME,
T314914.HIER9_CODE,
T314914.HIER9_NAME,
T314914.HIER10_CODE,
T314914.HIER10_NAME,
T314914.HIER11_CODE,
T314914.HIER11_NAME,
T314914.HIER12_CODE,
T314914.HIER12_NAME,
T314914.HIER13_CODE,
T314914.HIER13_NAME,
T314914.HIER14_CODE,
T314914.HIER14_NAME,
T314914.HIER15_CODE,
T314914.HIER15_NAME,
T314914.HIER16_CODE,
T314914.HIER16_NAME,
T314914.HIER17_CODE,
T314914.HIER17_NAME,
T314914.HIER18_CODE,
T314914.HIER18_NAME,
T314914.HIER19_CODE,
T314914.HIER19_NAME,
T314914.HIER20_CODE,
T314914.HIER20_NAME),
SAWITH1
AS (SELECT SUM (D1.c1) OVER () AS c1,
MAX (D1.c2) OVER (PARTITION BY D1.c22) AS c2,
MAX (D1.c3) OVER (PARTITION BY D1.c22) AS c3,
MAX (D1.c4) OVER (PARTITION BY D1.c22) AS c4,
MAX (D1.c5) OVER (PARTITION BY D1.c22) AS c5,
MAX (D1.c6) OVER (PARTITION BY D1.c22) AS c6,
MAX (D1.c7) OVER (PARTITION BY D1.c22) AS c7,
MAX (D1.c8) OVER (PARTITION BY D1.c22) AS c8,
MAX (D1.c9) OVER (PARTITION BY D1.c22) AS c9,
MAX (D1.c10) OVER (PARTITION BY D1.c22) AS c10,
MAX (D1.c11) OVER (PARTITION BY D1.c22) AS c11,
MAX (D1.c12) OVER (PARTITION BY D1.c22) AS c12,
MAX (D1.c13) OVER (PARTITION BY D1.c22) AS c13,
MAX (D1.c14) OVER (PARTITION BY D1.c22) AS c14,
MAX (D1.c15) OVER (PARTITION BY D1.c22) AS c15,
MAX (D1.c16) OVER (PARTITION BY D1.c22) AS c16,
MAX (D1.c17) OVER (PARTITION BY D1.c22) AS c17,
MAX (D1.c18) OVER (PARTITION BY D1.c22) AS c18,
MAX (D1.c19) OVER (PARTITION BY D1.c22) AS c19,
MAX (D1.c20) OVER (PARTITION BY D1.c22) AS c20,
D1.c21 AS c21,
D1.c22 AS c22,
SUM (
D1.c1)
OVER (
PARTITION BY D1.c46,
D1.c47,
D1.c48,
D1.c49,
D1.c50,
D1.c51,
D1.c52,
D1.c53,
D1.c54,
D1.c55,
D1.c45,
D1.c44,
D1.c56,
D1.c57,
D1.c58,
D1.c59,
D1.c60,
D1.c61,
D1.c62,
D1.c63,
D1.c22)
AS c23,
D1.c24 AS c24,
D1.c25 AS c25,
D1.c26 AS c26,
D1.c27 AS c27,
D1.c28 AS c28,
D1.c29 AS c29,
D1.c30 AS c30,
D1.c31 AS c31,
D1.c32 AS c32,
D1.c33 AS c33,
D1.c34 AS c34,
D1.c35 AS c35,
D1.c36 AS c36,
D1.c37 AS c37,
D1.c38 AS c38,
D1.c39 AS c39,
D1.c40 AS c40,
D1.c41 AS c41,
D1.c42 AS c42,
D1.c43 AS c43,
D1.c44 AS c44,
D1.c45 AS c45,
D1.c46 AS c46,
D1.c47 AS c47,
D1.c48 AS c48,
D1.c49 AS c49,
D1.c50 AS c50,
D1.c51 AS c51,
D1.c52 AS c52,
D1.c53 AS c53,
D1.c54 AS c54,
D1.c55 AS c55,
D1.c56 AS c56,
D1.c57 AS c57,
D1.c58 AS c58,
D1.c59 AS c59,
D1.c60 AS c60,
D1.c61 AS c61,
D1.c62 AS c62,
D1.c63 AS c63
FROM SAWITH0 D1)
SELECT DISTINCT
38 AS c1,
D1.c24 AS c2,
D1.c25 AS c3,
D1.c26 AS c4,
D1.c27 AS c5,
D1.c28 AS c6,
D1.c29 AS c7,
D1.c30 AS c8,
D1.c31 AS c9,
D1.c32 AS c10,
D1.c33 AS c11,
D1.c34 AS c12,
D1.c35 AS c13,
D1.c36 AS c14,
D1.c37 AS c15,
D1.c38 AS c16,
D1.c39 AS c17,
D1.c40 AS c18,
D1.c41 AS c19,
D1.c42 AS c20,
D1.c43 AS c21,
D1.c21 AS c22,
NULL AS c23,
NULL AS c24,
NULL AS c25,
NULL AS c26,
NULL AS c27,
NULL AS c28,
NULL AS c29,
NULL AS c30,
NULL AS c31,
NULL AS c32,
NULL AS c33,
NULL AS c34,
NULL AS c35,
NULL AS c36,
NULL AS c37,
NULL AS c38,
NULL AS c39,
NULL AS c40,
NULL AS c41,
D1.c44 AS c42,
D1.c45 AS c43,
D1.c46 AS c44,
D1.c47 AS c45,
D1.c48 AS c46,
D1.c49 AS c47,
D1.c50 AS c48,
D1.c51 AS c49,
D1.c52 AS c50,
D1.c53 AS c51,
D1.c54 AS c52,
D1.c55 AS c53,
D1.c56 AS c54,
D1.c57 AS c55,
D1.c58 AS c56,
D1.c59 AS c57,
D1.c60 AS c58,
D1.c61 AS c59,
D1.c62 AS c60,
D1.c63 AS c61,
NULL AS c62,
D1.c22 AS c63,
NULL AS c64,
NULL AS c65,
NULL AS c66,
NULL AS c67,
NULL AS c68,
NULL AS c69,
NULL AS c70,
NULL AS c71,
NULL AS c72,
NULL AS c73,
NULL AS c74,
NULL AS c75,
NULL AS c76,
NULL AS c77,
NULL AS c78,
NULL AS c79,
NULL AS c80,
NULL AS c81,
D1.c23 AS c82,
CASE WHEN 1 = 1 THEN 1 ELSE 0 END AS c83,
CASE
WHEN D1.c2 IS NULL
AND D1.c3 IS NULL
AND D1.c4 IS NULL
AND D1.c5 IS NULL
AND D1.c6 IS NULL
AND D1.c7 IS NULL
AND D1.c8 IS NULL
AND D1.c9 IS NULL
AND D1.c10 IS NULL
AND D1.c11 IS NULL
AND D1.c12 IS NULL
AND D1.c13 IS NULL
AND D1.c14 IS NULL
AND D1.c15 IS NULL
AND D1.c16 IS NULL
AND D1.c17 IS NULL
AND D1.c18 IS NULL
AND D1.c19 IS NULL
AND D1.c20 IS NULL
THEN
1
ELSE
0
END
AS c84
FROM SAWITH1 D1
WHERE ( D1.c44 IS NOT NULL
AND D1.c50 IS NULL
AND D1.c49 IS NULL
AND D1.c22 IS NOT NULL
AND D1.c51 IS NULL
AND D1.c52 IS NULL
AND D1.c53 IS NULL
AND D1.c54 IS NULL
AND D1.c55 IS NULL)
/* Formatted on 12/17/2012 7:49:44 PM (QP5 v5.139.911.3011) */
WITH OBICOMMON0
AS (SELECT T156337.ROW_WID AS c2,
T156337.MCAL_PERIOD_WID AS c3,
ROW_NUMBER ()
OVER (PARTITION BY T156337.MCAL_PERIOD_WID
ORDER BY T156337.MCAL_PERIOD_WID DESC)
AS c4,
T156337.MCAL_PERIOD_NAME AS c5,
T156337.MCAL_PER_NAME_YEAR AS c6
FROM W_MCAL_DAY_D T156337 /* Dim_W_MCAL_DAY_D_Fiscal_Day */
WHERE (T156337.MCAL_CAL_NAME = 'Accounting')),
SAWITH0
AS (SELECT CASE
WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
IS NOT NULL
THEN
RANK ()
OVER (
ORDER BY
CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
END
AS c1,
D1.c2 AS c2,
D1.c3 AS c3
FROM OBICOMMON0 D1),
SAWITH1
AS (SELECT DISTINCT
MIN (D1.c1) OVER (PARTITION BY D1.c3) AS c1, D1.c2 AS c2
FROM SAWITH0 D1),
SAWITH2
AS (SELECT CASE
WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
IS NOT NULL
THEN
RANK ()
OVER (
ORDER BY
CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
END
AS c1,
D1.c3 AS c2,
D1.c5 AS c3,
D1.c6 AS c4
FROM OBICOMMON0 D1),
SAWITH3 AS (SELECT DISTINCT MIN (D1.c1) OVER (PARTITION BY D1.c2) AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4
FROM SAWITH2 D1),
SAWITH4
AS ( SELECT SUM (T91707.TD_OTHER_REP_AMT) AS c1,
T314914.HIER1_NAME AS c2,
D2.c3 AS c3,
T314914.HIER1_CODE AS c4,
D2.c2 AS c5
FROM W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
SAWITH1 D4,
SAWITH3 D2
WHERE ( T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
AND T91397.ROW_WID = T91707.GL_ACCOUNT_WID
AND T91707.ACCT_PERIOD_END_DT_WID = D4.c2
AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
AND T315731.SEGMENT_LOV_NAME =
'Account_Retail_Distribution'
AND T315731.SEGMENT_LOV_ID = 1000165
AND D2.c1 = D4.c1
AND (D2.c4 IN ('2011', '2012')))
GROUP BY T314914.HIER1_CODE,
T314914.HIER1_NAME,
D2.c2,
D2.c3)
SELECT D1.c1 AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4,
D1.c5 AS c5,
D1.c6 AS c6
FROM ( SELECT DISTINCT 0 AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4,
D1.c1 AS c5,
D1.c5 AS c6
FROM SAWITH4 D1
ORDER BY c2 NULLS FIRST, c4 NULLS FIRST, c3) D1
WHERE ROWNUM <= 65001Hello Gurus, Experts
Any help/tips here ... -
SQL Query with a little bit more complicated WHERE clause performance issue
Hello, I have some performance issue in this case:
Very simplified query:
SELECT COUNT(*) FROM Items
WHERE
ConditionA OR
ConditionB OR
ConditionC OR ...
Simply I have to determine how many Items the user has access through some complicated conditions.
When there is a large number of records (100,000+) in the Items table and say ~10 complicated conditions concatenated in WHERE clause, I get the result about 2 seconds in my case. The problem is when very few conditions are met, f.e. when I get only
10 Items from 100,000.
How can I improve the performace in this "Get my items" case?
Additional information:
the query is generated by EF 6.1
MS SQL 2012 Express
Here is the main part of the real SQL Execution Plan:Can you post table/index DDL? Query?
Sample query:
exec sp_executesql N'SELECT
[GroupBy1].[A1] AS [C1]
FROM ( SELECT
COUNT(1) AS [A1]
FROM [dbo].[Tickets] AS [Extent1]
LEFT OUTER JOIN [dbo].[Services] AS [Extent2] ON [Extent1].[ServiceId] = [Extent2].[Id]
WHERE (@p__linq__0 = 1) OR ([Extent1].[SubmitterKey] = @p__linq__1) OR ([Extent1].[OperatorKey] = @p__linq__2) OR (([Extent1].[OperatorKey] IS NULL) AND (@p__linq__2 IS NULL)) OR ([Extent1].[SolverKey] = @p__linq__3) OR (([Extent1].[SolverKey] IS NULL) AND (@p__linq__3 IS NULL)) OR ([Extent1].[Incident2ndLineSupportKey] = @p__linq__4) OR (([Extent1].[Incident2ndLineSupportKey] IS NULL) AND (@p__linq__4 IS NULL)) OR ((@p__linq__5 = 1) AND ((1 = CAST( [Extent1].[TicketType] AS int)) OR ((@p__linq__6 = 1) AND (((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[IncidentManager] = @p__linq__7) OR (([Extent2].[IncidentManager] IS NULL) AND (@p__linq__7 IS NULL)))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ServiceRequestManager] = @p__linq__8) OR (([Extent2].[ServiceRequestManager] IS NULL) AND (@p__linq__8 IS NULL)))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ProblemManager] = @p__linq__9) OR (([Extent2].[ProblemManager] IS NULL) AND (@p__linq__9 IS NULL)))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[ChangeManager] = @p__linq__10) OR (([Extent2].[ChangeManager] IS NULL) AND (@p__linq__10 IS NULL)))))) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceDeputyManagers] AS [Extent3]
WHERE ([Extent1].[ServiceId] = [Extent3].[ServiceId]) AND ( CAST( [Extent3].[TicketType] AS int) = CAST( [Extent1].[TicketType] AS int)) AND ([Extent3].[UserProviderKey] = @p__linq__11)
)))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsIncidents] = 1) OR ((201 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableIncidentTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[Incident1stLineSupportLimitedAccess] <> cast(1 as bit))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsServiceRequests] = 1) OR ((301 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableServiceRequestTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[ServiceRequestLimitedAccess] <> cast(1 as bit))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent2].[AllowAccessToOtherOperatorsProblems] = 1) AND ([Extent2].[ProblemLimitedAccess] <> cast(1 as bit))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsChanges] = 1) OR ((501 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableChangeTakeFromQueueAction] <> cast(1 as bit)))) AND ([Extent2].[ChangeLimitedAccess] <> cast(1 as bit))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsIncidents] = 1) OR ((201 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableIncidentTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent4]
WHERE ([Extent1].[ServiceId] = [Extent4].[ServiceId]) AND (2 = CAST( [Extent4].[TicketType] AS int)) AND ([Extent4].[UserProviderKey] = @p__linq__12) AND (1 = [Extent4].[SupportLine])
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent5]
WHERE ([Extent5].[UserProviderKey] = @p__linq__13) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent6]
WHERE ([Extent6].[ServiceId] = [Extent1].[ServiceId]) AND (2 = CAST( [Extent6].[TicketType] AS int)) AND (1 = [Extent6].[SupportLine]) AND ([Extent6].[OperatorGroupId] = [Extent5].[OperatorGroupId])
)))) OR ((2 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent1].[IncidentFunctionEscalatedTo2ndLineSupport] = 1) AND ([Extent1].[Incident2ndLineSupportKey] IS NULL) AND (([Extent2].[Incident2ndLineSupportLimitedAccess] <> cast(1 as bit)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent7]
WHERE ([Extent1].[ServiceId] = [Extent7].[ServiceId]) AND (2 = CAST( [Extent7].[TicketType] AS int)) AND ([Extent7].[UserProviderKey] = @p__linq__14) AND (2 = [Extent7].[SupportLine])
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent8]
WHERE ([Extent8].[UserProviderKey] = @p__linq__15) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent9]
WHERE ([Extent9].[ServiceId] = [Extent1].[ServiceId]) AND (2 = CAST( [Extent9].[TicketType] AS int)) AND (2 = [Extent9].[SupportLine]) AND ([Extent9].[OperatorGroupId] = [Extent8].[OperatorGroupId])
)))) OR ((3 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsServiceRequests] = 1) OR ((301 = CAST( [Extent1].[TicketState] AS int)) AND ([Extent2].[WfDisableServiceRequestTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent10]
WHERE ([Extent1].[ServiceId] = [Extent10].[ServiceId]) AND (3 = CAST( [Extent10].[TicketType] AS int)) AND ([Extent10].[UserProviderKey] = @p__linq__16)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent11]
WHERE ([Extent11].[UserProviderKey] = @p__linq__17) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent12]
WHERE ([Extent12].[ServiceId] = [Extent1].[ServiceId]) AND (3 = CAST( [Extent12].[TicketType] AS int)) AND ([Extent12].[OperatorGroupId] = [Extent11].[OperatorGroupId])
)))) OR ((4 = CAST( [Extent1].[TicketType] AS int)) AND ([Extent2].[AllowAccessToOtherOperatorsProblems] = 1) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent13]
WHERE ([Extent1].[ServiceId] = [Extent13].[ServiceId]) AND (4 = CAST( [Extent13].[TicketType] AS int)) AND ([Extent13].[UserProviderKey] = @p__linq__18)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent14]
WHERE ([Extent14].[UserProviderKey] = @p__linq__19) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent15]
WHERE ([Extent15].[ServiceId] = [Extent1].[ServiceId]) AND (4 = CAST( [Extent15].[TicketType] AS int)) AND ([Extent15].[OperatorGroupId] = [Extent14].[OperatorGroupId])
)))) OR ((5 = CAST( [Extent1].[TicketType] AS int)) AND (([Extent2].[AllowAccessToOtherOperatorsChanges] = 1) OR ((501 = [Extent1].[TicketStateValue]) AND ([Extent2].[WfDisableChangeTakeFromQueueAction] <> cast(1 as bit)))) AND (( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperators] AS [Extent16]
WHERE ([Extent1].[ServiceId] = [Extent16].[ServiceId]) AND (5 = CAST( [Extent16].[TicketType] AS int)) AND ([Extent16].[UserProviderKey] = @p__linq__20)
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[OperatorGroupUsers] AS [Extent17]
WHERE ([Extent17].[UserProviderKey] = @p__linq__21) AND ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[ServiceOperatorGroups] AS [Extent18]
WHERE ([Extent18].[ServiceId] = [Extent1].[ServiceId]) AND (5 = CAST( [Extent18].[TicketType] AS int)) AND ([Extent18].[OperatorGroupId] = [Extent17].[OperatorGroupId])
)))) OR ( EXISTS (SELECT
1 AS [C1]
FROM [dbo].[TicketInvitations] AS [Extent19]
WHERE ([Extent19].[TicketId] = [Extent1].[Id]) AND (([Extent19].[InvitedUserProviderKey] = @p__linq__22) OR (([Extent19].[InvitedUserProviderKey] IS NULL) AND (@p__linq__22 IS NULL)))
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM (SELECT
[Extent20].[CustomerId] AS [CustomerId]
FROM [dbo].[CustomerUsers] AS [Extent20]
WHERE ([Extent20].[UserProviderKey] = @p__linq__23) AND ([Extent20].[CanAccessOthersTickets] = 1)
INTERSECT
SELECT
[Extent21].[CustomerId] AS [CustomerId]
FROM [dbo].[CustomerUsers] AS [Extent21]
WHERE [Extent21].[UserProviderKey] = [Extent1].[SubmitterKey]) AS [Intersect1]
)) OR ( EXISTS (SELECT
1 AS [C1]
FROM (SELECT
[Extent22].[InternalGroupId] AS [InternalGroupId]
FROM [dbo].[InternalGroupUsers] AS [Extent22]
WHERE ([Extent22].[UserProviderKey] = @p__linq__24) AND ([Extent22].[CanAccessOthersTickets] = 1)
INTERSECT
SELECT
[Extent23].[InternalGroupId] AS [InternalGroupId]
FROM [dbo].[InternalGroupUsers] AS [Extent23]
WHERE [Extent23].[UserProviderKey] = [Extent1].[SubmitterKey]) AS [Intersect2]
) AS [GroupBy1]',N'@p__linq__0 bit,@p__linq__1 varchar(8000),@p__linq__2 varchar(8000),@p__linq__3 varchar(8000),@p__linq__4 varchar(8000),@p__linq__5 bit,@p__linq__6 bit,@p__linq__7 varchar(8000),@p__linq__8 varchar(8000),@p__linq__9 varchar(8000),@p__linq__10 varchar(8000),@p__linq__11 varchar(8000),@p__linq__12 varchar(8000),@p__linq__13 varchar(8000),@p__linq__14 varchar(8000),@p__linq__15 varchar(8000),@p__linq__16 varchar(8000),@p__linq__17 varchar(8000),@p__linq__18 varchar(8000),@p__linq__19 varchar(8000),@p__linq__20 varchar(8000),@p__linq__21 varchar(8000),@p__linq__22 varchar(8000),@p__linq__23 varchar(8000),@p__linq__24 varchar(8000)',@p__linq__0=0,@p__linq__1='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__2='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__3='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__4='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__5=1,@p__linq__6=0,@p__linq__7='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__8='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__9='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__10='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__11='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__12='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__13='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__14='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__15='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__16='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__17='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__18='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__19='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__20='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__21='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__22='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__23='31555851-b89d-4a15-bb05-5a6fd42f9552',@p__linq__24='31555851-b89d-4a15-bb05-5a6fd42f9552'
Generated DDL for related tables: (indexes are primary on PKs and FKs)
CREATE TABLE [dbo].[CustomerUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[CustomerId] [int] NOT NULL,
[CanAccessOthersTickets] [bit] NOT NULL,
CONSTRAINT [PK_dbo.CustomerUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[InternalGroupUsers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[InternalGroupUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[InternalGroupId] [int] NOT NULL,
[CanAccessOthersTickets] [bit] NOT NULL,
CONSTRAINT [PK_dbo.InternalGroupUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[InternalGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[OperatorGroupUsers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[OperatorGroupUsers](
[UserProviderKey] [varchar](184) NOT NULL,
[OperatorGroupId] [int] NOT NULL,
CONSTRAINT [PK_dbo.OperatorGroupUsers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[ServiceDeputyManagers] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ServiceDeputyManagers](
[UserProviderKey] [varchar](184) NOT NULL,
[ServiceId] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceDeputyManagers] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[ServiceId] ASC,
[TicketType] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[ServiceOperatorGroups] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ServiceOperatorGroups](
[ServiceId] [int] NOT NULL,
[OperatorGroupId] [int] NOT NULL,
[TicketTypeValue] [int] NOT NULL,
[SupportLine] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceOperatorGroups] PRIMARY KEY CLUSTERED
[ServiceId] ASC,
[OperatorGroupId] ASC,
[TicketTypeValue] ASC,
[SupportLine] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[ServiceOperators] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ServiceOperators](
[UserProviderKey] [varchar](184) NOT NULL,
[ServiceId] [int] NOT NULL,
[TicketTypeValue] [int] NOT NULL,
[SupportLine] [int] NOT NULL,
[TicketType] [int] NOT NULL,
CONSTRAINT [PK_dbo.ServiceOperators] PRIMARY KEY CLUSTERED
[UserProviderKey] ASC,
[ServiceId] ASC,
[TicketTypeValue] ASC,
[SupportLine] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[Services] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Services](
[Id] [int] IDENTITY(1,1) NOT NULL,
[ParentId] [int] NULL,
[Name] [nvarchar](256) NOT NULL,
[Description] [nvarchar](max) NULL,
[Disabled] [bit] NOT NULL,
[NewTicketLimitedAccess] [bit] NOT NULL,
[Incident1stLineSupportLimitedAccess] [bit] NOT NULL,
[Incident2ndLineSupportLimitedAccess] [bit] NOT NULL,
[ServiceRequestLimitedAccess] [bit] NOT NULL,
[ProblemLimitedAccess] [bit] NOT NULL,
[ServiceRequestManager] [varchar](184) NOT NULL,
[IncidentManager] [varchar](184) NOT NULL,
[ProblemManager] [varchar](184) NOT NULL,
[Deleted] [bit] NOT NULL,
[WfDisableIncidentAssignedState] [bit] NOT NULL,
[WfDisableIncidentConfirmedState] [bit] NOT NULL,
[WfDisableIncidentTakeFromQueueAction] [bit] NOT NULL,
[WfDisableIncidentFinishSolutionAction] [bit] NOT NULL,
[WfDisableServiceRequestAssignedState] [bit] NOT NULL,
[WfDisableServiceRequestConfirmedState] [bit] NOT NULL,
[WfDisableServiceRequestTakeFromQueueAction] [bit] NOT NULL,
[WfDisableServiceRequestFinishSolutionAction] [bit] NOT NULL,
[WfDisableServiceRequestPostponeAction] [bit] NOT NULL,
[ChangeLimitedAccess] [bit] NOT NULL,
[ChangeManager] [varchar](184) NOT NULL,
[WfDisableChangeTakeFromQueueAction] [bit] NOT NULL,
[WfDisableChangeAssignedState] [bit] NOT NULL,
[WfDisableChangeStartPreparationAction] [bit] NOT NULL,
[IsDepartment] [bit] NOT NULL,
[InheritsFromDepartment] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForIncidents] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForServiceRequests] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForProblems] [bit] NOT NULL,
[AllowSelectSolverBySubmitterForChanges] [bit] NOT NULL,
[AllowAccessToOtherOperatorsIncidents] [bit] NOT NULL,
[AllowAccessToOtherOperatorsServiceRequests] [bit] NOT NULL,
[AllowAccessToOtherOperatorsProblems] [bit] NOT NULL,
[AllowAccessToOtherOperatorsChanges] [bit] NOT NULL,
[AllowChangeDeadlineForIncidents] [bit] NOT NULL,
[AllowChangeDeadlineForServiceRequests] [bit] NOT NULL,
[AllowChangeDeadlineForProblems] [bit] NOT NULL,
[AllowChangeDeadlineForChanges] [bit] NOT NULL,
[AllowSelectPriorityForServiceRequests] [bit] NOT NULL,
[WfDisableIncidentCompletedState] [bit] NOT NULL,
[WfDoIncidentCompleteActionBySubmittersMessage] [bit] NOT NULL,
[WfDisableServiceRequestCompletedState] [bit] NOT NULL,
[WfDoServiceRequestCompleteActionBySubmittersMessage] [bit] NOT NULL,
CONSTRAINT [PK_dbo.Services] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[TicketInvitations] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TicketInvitations](
[Id] [int] IDENTITY(1,1) NOT NULL,
[TicketId] [int] NOT NULL,
[InitiatorUserProviderKey] [varchar](184) NULL,
[InitiatorFullName] [nvarchar](max) NULL,
[InvitedUserProviderKey] [varchar](184) NULL,
[InvitedFullName] [nvarchar](max) NULL,
[Type] [int] NOT NULL,
[CreatedUTC] [datetime] NOT NULL,
CONSTRAINT [PK_dbo.TicketInvitations] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[Tickets] Script Date: 7.5.2014 8:39:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Tickets](
[Id] [int] IDENTITY(1,1) NOT NULL,
[ParentId] [int] NULL,
[ServiceId] [int] NULL,
[ServiceMailboxId] [int] NULL,
[TicketTypeValue] [int] NOT NULL,
[TicketTypeIdREF] [int] NOT NULL,
[SubmitterKey] [varchar](184) NOT NULL,
[SubmitterFullName] [nvarchar](256) NULL,
[CustomerId] [int] NULL,
[SolverKey] [varchar](184) NULL,
[SolverFullName] [nvarchar](256) NULL,
[Subject] [nvarchar](max) NULL,
[CreatedUTC] [datetime] NOT NULL,
[Archived] [bit] NOT NULL,
[MarkedAsSolvedUTC] [datetime] NULL,
[ArchivedUTC] [datetime] NULL,
[TicketSourceValue] [int] NOT NULL,
[OperatorKey] [varchar](184) NULL,
[DeadlineUTC] [datetime] NULL,
[DeadlineLastNotificatedPercentage] [int] NULL,
[UrgencyValue] [int] NULL,
[ImpactValue] [int] NULL,
[PriorityValue] [int] NULL,
[TicketStateValue] [int] NOT NULL,
[IncidentFunctionEscalatedTo2ndLineSupport] [bit] NOT NULL,
[Incident2ndLineSupportKey] [varchar](184) NULL,
[Incident2ndLineSupportFullName] [nvarchar](max) NULL,
[TicketType] [int] NOT NULL,
[Source] [int] NOT NULL,
[TicketState] [int] NOT NULL,
[Urgency] [int] NULL,
[Impact] [int] NULL,
[TicketSummaryState] [int] NOT NULL,
[ResolutionText] [nvarchar](max) NULL,
[ResolutionModifiedUTC] [datetime] NULL,
[ResolutionEdited] [bit] NOT NULL,
[ResolutionUserProviderKey] [varchar](184) NULL,
[ResolutionFullName] [nvarchar](max) NULL,
[TicketSubType] [int] NULL,
[ChangeRiskProbabilityValue] [int] NULL,
[ChangeImpactValue] [int] NULL,
[ChangeRiskCategoryValue] [int] NULL,
[RfcText] [nvarchar](max) NULL,
[RfcModifiedUTC] [datetime] NULL,
[RfcEdited] [bit] NOT NULL,
[RfcUserProviderKey] [varchar](184) NULL,
[RfcFullName] [nvarchar](max) NULL,
[ManualDeadline] [bit] NOT NULL,
[ContactInformation] [nvarchar](256) NULL,
[Imported] [bit] NOT NULL,
[ForceClosed] [bit] NOT NULL,
CONSTRAINT [PK_dbo.Tickets] PRIMARY KEY CLUSTERED
[Id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Index [IX_CustomerId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_CustomerId] ON [dbo].[CustomerUsers]
[CustomerId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_InternalGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_InternalGroupId] ON [dbo].[InternalGroupUsers]
[InternalGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_OperatorGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_OperatorGroupId] ON [dbo].[OperatorGroupUsers]
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceDeputyManagers]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_OperatorGroupId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_OperatorGroupId] ON [dbo].[ServiceOperatorGroups]
[OperatorGroupId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceOperatorGroups]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[ServiceOperators]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ParentId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ParentId] ON [dbo].[Services]
[ParentId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_TicketId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_TicketId] ON [dbo].[TicketInvitations]
[TicketId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_TicketInvitations_InvitedUserProviderKey_TicketId] Script Date: 7.5.2014 8:39:38 ******/
CREATE UNIQUE NONCLUSTERED INDEX [IX_TicketInvitations_InvitedUserProviderKey_TicketId] ON [dbo].[TicketInvitations]
[InvitedUserProviderKey] ASC,
[TicketId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_CustomerId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_CustomerId] ON [dbo].[Tickets]
[CustomerId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ParentId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ParentId] ON [dbo].[Tickets]
[ParentId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceId] ON [dbo].[Tickets]
[ServiceId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_ServiceMailboxId] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_ServiceMailboxId] ON [dbo].[Tickets]
[ServiceMailboxId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SolverFullName] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SolverFullName] ON [dbo].[Tickets]
[SolverFullName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SolverKey] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SolverKey] ON [dbo].[Tickets]
[SolverKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SubmitterFullName] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SubmitterFullName] ON [dbo].[Tickets]
[SubmitterFullName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [IX_SubmitterKey] Script Date: 7.5.2014 8:39:38 ******/
CREATE NONCLUSTERED INDEX [IX_SubmitterKey] ON [dbo].[Tickets]
[SubmitterKey] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [IX_Tickets_TicketType_TicketTypeIdREF] Script Date: 7.5.2014 8:39:38 ******/
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tickets_TicketType_TicketTypeIdREF] ON [dbo].[Tickets]
[TicketType] ASC,
[TicketTypeIdREF] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
ALTER TABLE [dbo].[CustomerUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.CustomerUsers_dbo.Customers_CustomerId] FOREIGN KEY([CustomerId])
REFERENCES [dbo].[Customers] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[CustomerUsers] CHECK CONSTRAINT [FK_dbo.CustomerUsers_dbo.Customers_CustomerId]
GO
ALTER TABLE [dbo].[InternalGroupUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.InternalGroupUsers_dbo.InternalGroups_InternalGroupId] FOREIGN KEY([InternalGroupId])
REFERENCES [dbo].[InternalGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[InternalGroupUsers] CHECK CONSTRAINT [FK_dbo.InternalGroupUsers_dbo.InternalGroups_InternalGroupId]
GO
ALTER TABLE [dbo].[OperatorGroupUsers] WITH CHECK ADD CONSTRAINT [FK_dbo.OperatorGroupUsers_dbo.OperatorGroups_OperatorGroupId] FOREIGN KEY([OperatorGroupId])
REFERENCES [dbo].[OperatorGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[OperatorGroupUsers] CHECK CONSTRAINT [FK_dbo.OperatorGroupUsers_dbo.OperatorGroups_OperatorGroupId]
GO
ALTER TABLE [dbo].[ServiceDeputyManagers] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceDeputyManagers_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceDeputyManagers] CHECK CONSTRAINT [FK_dbo.ServiceDeputyManagers_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.OperatorGroups_OperatorGroupId] FOREIGN KEY([OperatorGroupId])
REFERENCES [dbo].[OperatorGroups] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] CHECK CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.OperatorGroups_OperatorGroupId]
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperatorGroups] CHECK CONSTRAINT [FK_dbo.ServiceOperatorGroups_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[ServiceOperators] WITH CHECK ADD CONSTRAINT [FK_dbo.ServiceOperators_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[ServiceOperators] CHECK CONSTRAINT [FK_dbo.ServiceOperators_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[Services] WITH CHECK ADD CONSTRAINT [FK_dbo.Services_dbo.Services_ParentId] FOREIGN KEY([ParentId])
REFERENCES [dbo].[Services] ([Id])
GO
ALTER TABLE [dbo].[Services] CHECK CONSTRAINT [FK_dbo.Services_dbo.Services_ParentId]
GO
ALTER TABLE [dbo].[TicketInvitations] WITH CHECK ADD CONSTRAINT [FK_dbo.TicketInvitations_dbo.Tickets_TicketId] FOREIGN KEY([TicketId])
REFERENCES [dbo].[Tickets] ([Id])
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[TicketInvitations] CHECK CONSTRAINT [FK_dbo.TicketInvitations_dbo.Tickets_TicketId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Customers_CustomerId] FOREIGN KEY([CustomerId])
REFERENCES [dbo].[Customers] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Customers_CustomerId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.ServiceMailboxes_ServiceMailboxId] FOREIGN KEY([ServiceMailboxId])
REFERENCES [dbo].[ServiceMailboxes] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.ServiceMailboxes_ServiceMailboxId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Services_ServiceId] FOREIGN KEY([ServiceId])
REFERENCES [dbo].[Services] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Services_ServiceId]
GO
ALTER TABLE [dbo].[Tickets] WITH CHECK ADD CONSTRAINT [FK_dbo.Tickets_dbo.Tickets_ParentId] FOREIGN KEY([ParentId])
REFERENCES [dbo].[Tickets] ([Id])
GO
ALTER TABLE [dbo].[Tickets] CHECK CONSTRAINT [FK_dbo.Tickets_dbo.Tickets_ParentId]
GO -
Experiencing strange performance issues after a hard drive failure - Help!
I bought my mid-2012 i5 Macbook Pro in December of 2012. I realized when shopping for computers that I wanted an SSD installed, but that it would be a lot cheaper if I bought the SSD and installed it rather than customizing it in the Apple Store. So I bought a nice Samsung 128GB SSD (820 or 840 - can't remember which) and did the installation. I went ahead and installed two 4GB sticks of RAM while I was at it. Everything was just dandy: my boot time was just under 9 seconds, and all of my data-heavy apps booted in no-time at all. Then all **** broke loose.
About two weeks ago, I opened my computer and I got the dreaded "? File Folder" notification with a gray screen. I immediately thought hard drive failure. No matter how many times I tried to boot, the computer just would not talk to the SSD anymore. I used Internet Recovery to get into my Disk Utility, and the entire partition was gone. I assumed the worst but wanted to be sure - I bought a hard drive enclosure and hooked the SSD up to an older Macbook, and lo and behold: it worked perfectly. I was not only able to recover data, but I could write data to the drive. Nothing appeared wrong with the drive when I plugged it into the old Macbook, but my newer Macbook still would not recognize it. Even my fiance's Windows 7 PC recognized the drive as "?" (since it was formatted for Mac, but hey - it recognized that it existed!).
I decided to re-install the original HDD that came with the 2012 Macbook Pro (the one I removed in favor of the SSD). I was able to re-install the OS and I can boot up at will, but everything is different. The performance issues are extremely noticeable. I can't have more than two programs running at one time without the spinning wheel of death appearing. My boot time went from 9 seconds to 2 minutes. I know that SSDs increase performance, so there is some slight performance downgrade to be expected since I am using a mechanical drive now -- but these are not normal issues. Sometimes I can't even type a web address into Safari without the wheel appearing. iTunes, and specifically the App Store, take minutes to open - and I have no media is on iTunes.
Here's the thing: I have tried just about anything to fix this problem that Google can pull up. I've verified the HDD, I've booted into Safe Mode, reset RAM and cache, run benchmarks and other performance tests, entered all sorts of weird language into Command Prompt, and studied Activity Monitor - I can't find a single red flag that would indicate anything being wrong. It appears to be a perfectly functioning, updated computer.
I'm thinking a piece of hardware failed that triggered the error with the SSD. I'm not really sure though since all of my performance tests indicate perfectly functioning hardware. I'm a little afraid to take it to the Apple store because I know they'll tell me it's my fault for opening the computer and replacing the hard drive in the first place.
Any ideas? At this point anything to salvage this computer would be helpful.Spin Cycle,
were those other computers which were able to recognize your SSD in its external enclosure also Macs? Do you know if your SSD has its most recent firmware revision installed? (If it doesn’t, its installer can be downloaded from the Samsung SSD firmware page for burning onto a bootable DVD.) I haven’t used the 830 myself, so I don’t know what its reputation is with Macs. I have an 840 PRO in my MacBook Pro, which has been trouble-free for me, but my understanding is that the 840 EVO has had trouble with Macs in its earlier firmware revisions — so I’m wondering if the 830 has a known track record with Macs, good or bad. -
I find that the 4.1 rc version is better than 4.0 but still not snappy like 3.6 was. Here are some things I have noticed that are slow:
• tagging images with flags, colors, labels, etc. - seems to be a two to three second delay when doing this before they register and show up with the files. I have write .xmp off.
• and in regards to writing to xmp off, if I select it, It seems to want to update my whole catalog (148,000 images) and if I try to quit, it promps me that it has not finished and do I want to quit and if I do it will resume upon restarting. At that point when I try to quit, it just hangs even if I tell it to quit writing xmp info. I let it go for a couple hours yesterday and it seems it still didn't finish and caused problems again trying to quit. I ended up having to force quit. I never remember this problem in the past and in the past, if you selected write to xmp or not, it used to do it or not do it from that point forward. Until this is fixed, I have it off and just manually save metadata using Cmd-S.
•When in library mode, moving between images is snappy, however once you go to the develop module, it slows to a snail's pace (3-5 second delay). I know develop module is not as fast in general for moving between images, but in ver. 3.6 there was only a slight delay (maybe 1 sec.). Now I'm bouncing back and forth wasting time switching modules, which brings me to my next performance issue:
* When switching from library to develop, it takes quite a few seconds to respond, then after that it loads the image with the loading... icon/message, and another few seconds are wasted. That used to be almost instantaneous in 3.6. Going to develop to library seems fine with only a slight delay.
• The adjustment brush is faster in 4.1 than 4.0 but not nearly as responsive as in 3.6 which is frustrating and very easy to overdo what you're trying to do by the time the brush catches up.
•Sliders still have a bit of jerkiness to them in develop module. Also sometimes when I grab a scrubby slider to move it, it highlights the field as if I want to enter a number. Wish this would not happen. If I want to enter the number, a single click should do it in the field. If I grab the scrubby slider, it should just activate the scrubby slider.
• Keyword suggestions take much longer to generate. In 3.6 as fast as I'd add keywords, the relevant suggestions would pop up right away.
• When zooming into 100%, it seems to be reasonably fast to render, but I've noticed sometimes it just shows the blurred semi-rendered version without actually rendering 1:1. Even unzooming and rezooming doesn't work. Only solution is to go to another image and then back to the original image and that seems to kick it into gear and re-initialize the rendering engine.
Overall I love the features and new process 2012, I'm just disappointed in the performance. Especially now that I'm trying to edit a large job. I really wish the program could be optimized to work as well as 3.6 did and I hope once the final version of 4.1 is released (hopefully soon) we will see an overall performance boost. I have removed ver 3.6 from my system so that's too much of a hassle to go back and not an option, plus I've gotten used to the new process and like it too much to go back.
From the posts I've read it seems others are experiencing this as well, as well as colleagues I've spoken to. It seems to be across platforms and regardless of computer specs (as long as someone's using a fairly updated and capable computer)
Thanks for working on a performance boost Adobe and getting ver. 4.1 dialed in and releasing a final version.Cannot reproduce on Win7 64Bit (LR4.1RC).
What OS
what external editor
what image format is the original
what image format is passed to the external editor
Beat -
Connecting 4k monitor to Macbook Pro retina 2012 mid
I tried to connect to Macbook Pro retina 2012 mid 15 inch 2.7GHZ model. Initially I connected using HDMI to 3840x2160 at 30 hz. I casually changed the resolution to 1080 p from scaled option. Now I no more get the option of scaling to 4k. I am unsure what is the issue over it. When I log into my windows. I am able to log in with my original 4k resolution in 30 HZ. Any guidance would be really great.
2) I read a few forums regarding 4k with 60hz external monitor connection for macbook pro retina 2012 mid. But I couldn't get a clear solution whether it is possible or not. Would be great if someone can show lights on this too.jcannizzo wrote:
1- does Apple ever do exchanges for newly released products? I bought my MacBook in jan they came out with new in mar.
If you purchased the product from Apple, not a third party, you have 14 days from the date of purchase to return it for a refund or exchange. You are well past that.
2- if and when Apple comes out with a 4k or 5k thunderbolt display, will it be backwards compatible with my MacBook sich that I can't get the resolutions and 60mhz?
I do not have an answer to that and the Terms of Use for these forums discourages from speculating what Apple may or may not do in the future. Having said that, from a practical business standpoint, backwards compatibility would be a sensible approach. It has been done so in many areas in the past.
Ciao. -
Performance issues - Log file parallel write
Hi there,
Since a few months I have big performance issues with my Oracle 11.2.0.1.0.
If I look in the Enterprise manager (in blocking sessions) I see al lot of "log file paralles writes" and a lot of "log file sync" .
We have configured an active data guard environment and are using ASM.
We are not stressing out the database with heavy queries or commits or something, but sometimes during the day this happens on non specific times...
We've investigated everything (performance to SAN / heavy queries / oracle problems etc etc) and we really don't know what to do anymore so i thought.. let's try a post on the Forum.....
Perhaps someone had similar things?
Thanks,
BR
Markmwevromans wrote:
See blow a tail of alertlog.
Tue Apr 24 15:12:17 2012
Thread 1 cannot allocate new log, sequence 194085
Checkpoint not complete
Current log# 1 seq# 194084 mem# 0: +DATA/kewillprd/onlinelog/group_1.262.712516155
Current log# 1 seq# 194084 mem# 1: +FRA/kewillprd/onlinelog/group_1.438.756466165
LGWR: Standby redo logfile selected to archive thread 1 sequence 194085
LGWR: Standby redo logfile selected for thread 1 sequence 194085 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 194085 (LGWR switch)
Current log# 2 seq# 194085 mem# 0: +DATA/kewillprd/onlinelog/group_2.264.712516155
Current log# 2 seq# 194085 mem# 1: +FRA/kewillprd/onlinelog/group_2.418.756466215
Tue Apr 24 15:12:21 2012
Archived Log entry 388061 added for thread 1 sequence 194084 ID 0x90d7aa62 dest 1:
Tue Apr 24 15:14:09 2012
Thread 1 cannot allocate new log, sequence 194086
Checkpoint not complete
Current log# 2 seq# 194085 mem# 0: +DATA/kewillprd/onlinelog/group_2.264.712516155
Current log# 2 seq# 194085 mem# 1: +FRA/kewillprd/onlinelog/group_2.418.756466215
LGWR: Standby redo logfile selected to archive thread 1 sequence 194086
LGWR: Standby redo logfile selected for thread 1 sequence 194086 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 194086 (LGWR switch)
Current log# 3 seq# 194086 mem# 0: +DATA/kewillprd/onlinelog/group_3.266.712516155
Current log# 3 seq# 194086 mem# 1: +FRA/kewillprd/onlinelog/group_3.435.756466241
Tue Apr 24 15:14:14 2012
Archived Log entry 388063 added for thread 1 sequence 194085 ID 0x90d7aa62 dest 1:
Tue Apr 24 15:16:46 2012
Thread 1 cannot allocate new log, sequence 194087
Checkpoint not complete
Current log# 3 seq# 194086 mem# 0: +DATA/kewillprd/onlinelog/group_3.266.712516155
Current log# 3 seq# 194086 mem# 1: +FRA/kewillprd/onlinelog/group_3.435.756466241
Thread 1 cannot allocate new log, sequence 194087
Private strand flush not complete
Current log# 3 seq# 194086 mem# 0: +DATA/kewillprd/onlinelog/group_3.266.712516155
Current log# 3 seq# 194086 mem# 1: +FRA/kewillprd/onlinelog/group_3.435.756466241
LGWR: Standby redo logfile selected to archive thread 1 sequence 194087
LGWR: Standby redo logfile selected for thread 1 sequence 194087 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 194087 (LGWR switch)
Current log# 1 seq# 194087 mem# 0: +DATA/kewillprd/onlinelog/group_1.262.712516155
Current log# 1 seq# 194087 mem# 1: +FRA/kewillprd/onlinelog/group_1.438.756466165
Tue Apr 24 15:16:54 2012
Archived Log entry 388065 added for thread 1 sequence 194086 ID 0x90d7aa62 dest 1:
Tue Apr 24 15:18:59 2012
Thread 1 cannot allocate new log, sequence 194088
Checkpoint not complete
Current log# 1 seq# 194087 mem# 0: +DATA/kewillprd/onlinelog/group_1.262.712516155
Current log# 1 seq# 194087 mem# 1: +FRA/kewillprd/onlinelog/group_1.438.756466165
Thread 1 cannot allocate new log, sequence 194088
Private strand flush not complete
Current log# 1 seq# 194087 mem# 0: +DATA/kewillprd/onlinelog/group_1.262.712516155
Current log# 1 seq# 194087 mem# 1: +FRA/kewillprd/onlinelog/group_1.438.756466165
LGWR: Standby redo logfile selected to archive thread 1 sequence 194088
LGWR: Standby redo logfile selected for thread 1 sequence 194088 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 194088 (LGWR switch)
Current log# 2 seq# 194088 mem# 0: +DATA/kewillprd/onlinelog/group_2.264.712516155
Current log# 2 seq# 194088 mem# 1: +FRA/kewillprd/onlinelog/group_2.418.756466215
Tue Apr 24 15:19:06 2012
Archived Log entry 388067 added for thread 1 sequence 194087 ID 0x90d7aa62 dest 1:
Tue Apr 24 15:22:00 2012
Thread 1 cannot allocate new log, sequence 194089
Checkpoint not complete
Current log# 2 seq# 194088 mem# 0: +DATA/kewillprd/onlinelog/group_2.264.712516155
Current log# 2 seq# 194088 mem# 1: +FRA/kewillprd/onlinelog/group_2.418.756466215
Thread 1 cannot allocate new log, sequence 194089
Private strand flush not complete
Current log# 2 seq# 194088 mem# 0: +DATA/kewillprd/onlinelog/group_2.264.712516155
Current log# 2 seq# 194088 mem# 1: +FRA/kewillprd/onlinelog/group_2.418.756466215
LGWR: Standby redo logfile selected to archive thread 1 sequence 194089
LGWR: Standby redo logfile selected for thread 1 sequence 194089 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 194089 (LGWR switch)
Current log# 3 seq# 194089 mem# 0: +DATA/kewillprd/onlinelog/group_3.266.712516155
Current log# 3 seq# 194089 mem# 1: +FRA/kewillprd/onlinelog/group_3.435.756466241
Tue Apr 24 15:19:06 2012
Archived Log entry 388069 added for thread 1 sequence 194088 ID 0x90d7aa62 dest 1:Hi
1st switch time ==> Tue Apr 24 15:18:59 2012
2nd switch time ==> Tue Apr 24 15:19:06 2012
3rd switch time ==> Tue Apr 24 15:19:06 2012
Redo log file switch has good impact on the performance of the database. Frequent log switches may lead to the slowness of the database . Oracle documents suggests to resize the redolog files so that log switches happen more like every 15-30 min (roughly depending on the architecture and recovery requirements).
AS i check the alertlog file and find that the log are switchinh very fequent which is one of the reason that you are getting checkpoint not complete message . i have face this issue many times and i generally increase the size of the logfile and set the archive_lag_time parameter as i have suggested above . If you further want to go root cause and more details then above guys will help you more because i don't have much experience in database tunning . If you looking for aworkarounf then you must go through it .
Good Luck
--neeraj -
Performance issues using multiple CC design programs?
Hey! I'm Gwidz, and I'm having some performance issues with my adobe programs. I primarily use Photoshop, InDesign and Illustrator for design work. I find that when I have any two of them open, I experience delays in clicking and dragging using my pen tablet, and laggy zooming in/scrolling. This issue disappears when I only have one program open.
I just bought this laptop to use these programs. Here's the specs:
Operating system: Windows 8 64 bit
Processor: 4th gen intel i7 4700HQ
Ram: 16gb DDR3
Graphics: NVIDIA GeForce GTX 770M 3GB GDDR5
Cost me 2000 bucks on amazon, and I'm pretty disappointed in how things are going right now. I definitely don't think it could be a hardware issue, could it?
I'm using an SSD as my scratch disc, and using the 64 bit versions of all programs that have it. Nothing else running in the background except these programs, and yet still I experience poor performance.
Admitedly, I'm new to windows 8, and I'm learning everything that I can about it in hopes of resolving this issue.
If anyone has any advice, any and all is greatly aprpeciated!I'm seeing this exact same choppiness and VERY slow response times with the same low use of CPU and memory... WITH JUST ONE APP OPEN! Illustrator.
Macbook Retina Pro, 15 inch.
I've tried with the GPU forced off, and forced on, and on autoswitching.
I've tried clean reinstalls. And reboots. Etc.
This is not hardware related. It's something utterly flawed with the way Illustrator (and InDesign) draw do things. They are just grotesquely inefficient.
The fact that the program/app makes no effort to use more CPU/GPU to speed up responsiveness to the user input is the real indicator of how poorly optimised this code is.
After Effects is better. But it's adaptive degradation STUTTERS grotesquely, and it's actually better to try to turn that off. Although I'm having a hard time trying to figure out how to turn that off at the moment.. forgotten where I previously found that switch.
Photoshop is also better.
I'm also talking about small files. Nothing in them. Just start drawing... Stutters... atrocious frame rates for the update of the screen and very poor response rates to input.
This is 64 bit optimised? I don't think so.
Maybe you are looking for
-
How can I display images in tables?
My images that I have put into tables in my iBook are visible in iBooks Author. However, when I preview it on my iPad, I cannot see the images in the tables. Any ideas anyone?
-
How can I change an Apple ID to an iCloud email?
I set up an apple ID years ago and have used it to buy a lot of stuff. I know you can't merge apple IDs, but it occurred to me that my current problem (having to do with getting family sharing set up) could be solved if I could CHANGE my old apple ID
-
Default values set for Tax data in material master
Hi Can anyone tell me how to set default values for TAx dat in sales view while creating material master. so that it automatically take values while creating material master. Regards Vijay Shukla
-
Checking User rights in CMC 3.2 : How to search for a user ?
Hello, We are in XI 3.2, and the rights applied on Public Folders are based on user groups, not individuals (hopefully). In the CMC, when we want, for support purpose, to check what is the results of these rights for a given user, the "Select" panel
-
Can LabVIEW read attachement file in an Email?
I know how to send an email with an attachment but is there a vi to read the attachement from Labview?