Retract Action Menu Selection for EQ - Does this require configuration?

We are currently on version 6.1.0.1 - under the eQ action menu of a sent eQ is the "Retract" action. When I select this action for an "InProgress eQ", nothing happens and the eQ status does not change.
When I searched the configuration, navigation, administrator, and eQ documentation, I did not find any information on the RETRACT action until release 6.1.1.x
I would like to figure out how to configure this action in my current version. Is there any information that is not in the 6.1.0 documentation that I can use to make this action menu seletion work as expected?

Hi Beckie,
This is a Known issue, 'Retract' function is not supported in 6.1.0.x version. Sorry to bring any confusion. We will remove this button in later release of 6.1.0.x.
However, this function is fully supported in 6.1.1.x version. so please try on 6.1.1.x server.
Thanks,
Jessie
Edited by: Jessie C on Mar 5, 2013 2:59 AM

Similar Messages

"Orphan Timeline" & "End Action Not Set." What does this mean????

I am setting up a Blu-Ray DVD in Encore. I have a project on a Premiere Pro CS 5.5 Timeline, which is 2 and a half hours long with 24 Encore chapters in it. I have not yet Encoded it in Media Encoder as of yet.
I am setting up all my menus and buttons in Encore so all I have to do is link the buttons to them main project when I do encode it and then I can just Check it and Burn it.
I did check my project just now though and all buttons came up with 2 Errors:
1) Orphan Timeline
2) End action not set.
1) "Orphan Timeline", I assume that means that the button is not linked to any timeline as of yet, correct? (This would be true because there is no main project timeline in there yet.)
2) "End action not set." What does this mean? Will this go away once I add my whole project into Encore and I link up all of the buttons to the timeline?
Thanks in advance
Premiere Pro CS 5.5
Encore 5.5
Media Encoder 5

1) Orphan Timeline
2) End action not set.
Both of these suggest that you created a timeline in the Encore project, perhaps with no "asset" in it.
Yes, ignore both messages for now. But I prefer creating the timeline after, or along with, importing the asset into the Encore project.
If you believe you have not created a timeline, post a screenshot of your "flowchart."

Menu selection for" orginze bookmarks" is missing? firefox 4.7

In Firefox 4.7 on bookmark menu selection for "Organize bookmarks" is missing.

Organize Bookmarks = '''Show All Bookmarks''' - starting with b7

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

SELECT FOR UPDATE - does it write to REDO?

Greetings folks,
we have some strange performance issues with a recent application update. This is custom in-house application. Every morning since the deploy we get a spike in load, especially to log sync / redo archive. We capture activity surrounding the load, and found many "select for update" statements.
Im digging through metalink and docs looking to confirm "write or no write" to the redo log files. comments appreciated.

sb92075 wrote:
SELECT does not generate REDO
DML generates REDO.It is possible for a SELECT to generate redo due to the effects of delayed block cleanout. A small test case:
Session 1:
CREATE TABLE T10 AS
SELECT
ROWNUM RN
FROM
DUAL
CONNECT BY
LEVEL<=1000;
UPDATE
T10
SET
RN=RN;
UPDATE
T10
SET
RN=RN;
UPDATE
T10
SET
RN=RN;
Session 2:
ALTER SYSTEM FLUSH BUFFER_CACHE;
ALTER SYSTEM FLUSH BUFFER_CACHE;
Session 1:
COMMIT;
Session 2:
SET AUTOTRACE ON STATISTICS
SELECT
FROM
T10;
1000 rows selected.
Statistics
          0 recursive calls
          0 db block gets
         73 consistent gets
          3 physical reads
        188 redo size
      11104 bytes sent via SQL*Net to client
       1060 bytes received via SQL*Net from client
         68 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
       1000 rows processedNote that the above may be performed in a single session rather than using two sessions. Essentially, the flush of the buffer cache causes the dirty blocks (containing uncommitted changes) to be written to disk, and the blocks are "cleaned up" during the next SELECT which accesses the blocks.
A much better explanation:
http://jonathanlewis.wordpress.com/2009/06/16/clean-it-up/
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

"Optimising Photos for iPod" Does this affect photos in iPhoto Library?

Hi,
I have a question regarding syncing pictures which are stored in my iPhoto library with my iPod touch.
I notice when I sync photos I get a message that iTunes is "optimising photos for iPod"
1) Does this mean that 'quality' of the photos is reduced/compressed?
If so, does this mean that any picture downloaded onto my iPod, it's quality is reduced within iPhoto app.
or
2) The original quality of the photo is unchanged within iPhoto and it's only the synced photo which is 'optimised' for the sync process?
I hope this makes sense!
Thanks...........

Hi Dave,
Don't worry, iTunes only mangles, er I mean "optimises" the photos on your Touch.
The originals will stay intact on your computer, if you look in the photo file you sync with there should be another file called "iPod Photo Cache" where the marmalised ones are stored.
Dud.
ps. any photo, regardless of size gets butchered to a max of 640x480 and file size approx 650kb.
Message was edited by: Duddo

Newbie Web Programmer. Does this require Flash or less?

Hey Guys!
This is my first post and I am hoping you are not a bunch of sharks that are after my bleeding appendages. I need some guidance with a current web design project that I am doing.
The site itself is a fixed framing of about 800 x 600 pixels.
At the bottom of the site there are six navigation buttons.
The 6 buttons trigger a SMALLER inset frame in the middle of the site design.
How can I achieve the following?
When the user highlights one of these navigation buttons, the following happens:
The navigation button font changes colors and plays a sound signifying hover, and a sub-menu extends above revealing sub-catgeories for the user to pick.
ONCE A sub category is SELECTED,
The following happens:
Information in the little INSET window CHANGES
AND
The background of the "HOST" site, carrying the frame with changing content, FADES SMOOTHLY into a different set image. (The portions of the website that are BEHIND the text information frame.)
Id like to avoid using flash if possible, so if having a sound means flash id rather do without.
Does this make sense?
If anyone can help Id be so thankful!
have a happy day!
sam

Hey Sam!
If you are looking to avoid a Flash solution, you should post this in a non-Flash forum. Try the Dreamweaver forum: http://forums.adobe.com/community/dreamweaver/dreamweaver_general... there's plenty of folks there that don't care for Flash that should hopefully be able to offer a non-Flash solution.... though what you described sounds like a complete Flash design may be appropriate, not just the sound aspect.

Does this Macbook configuration meet my needs (school/gaming)?

Hello,
I am considering making the change from PC to Mac just to try out something new and I could use some help deciding if this Macbook configuration would meet my needs.
I am a working student, so I spend most of my time commuting either to and from campus or to and from work. Because of this, I need something that is fairly portable and good for both reading and writing.
I also have an interest in gaming. While I'm by no means a "pro gamer" with an interest in playing only the most demanding games on max settings, I would like to have the flexibility to play some older games I like (Team Fortress 2, Civilization 5, League of Legends) as well as some newer games (Dark Souls 2, Elder Scrolls Online, etc.) without sacrificing too much in terms of performance.
My current configuration looks like this -
13-inch MacBook Pro with Retina Display
2.8 GHz Dual-core Intel Core i7 (boost up to 3.3 GHz)
4GB RAM
128 GB flash storage
whatever GPU comes with the MacBook
While I'm by no means computer illiterate, I only have an amateur understanding of computers and the performance of various hardware.
If this configuration won't meet my needs, can I get any suggestions on what could? I know Macs aren't optimal for gaming. However, I've never owned a Mac and I would like to see how it works out for me.
Thanks

You're right in saying that MacBook Pros are the best when it comes to gaming. But I don't think, based on your specs, that you're going to have enough RAM to even play some games. And you have to look down the road - while 4GB might work today, it might be a minimum requirement in the years to come. Since you can't replace RAM in a Retina mode, I would order at least 8GB.
And I'm assuming that you'll be using a portable external USB 3.0 drive to augment the 128GB flash storage? That's not a lot of storage space - you'd be best to install the system and application on the 128GB drive and get a larger drive to keep your user files.
My 2¢... upgrade the RAM to 8GB and purchase a USB 3.0 external drive of 1 terabyte or more to store your user files.
Clinton

With Firefox 11 I have a new item on the right click menu called Volcano. Does this mean I have been hacked or this a feature I can't find and info on?

With Firefox 11 it looks like I have been hacked but I can't tell for sure. With a right click in the browser menu there is a Volcano option at the top. I can't find and help information of this menu option. I don't dare click on it.
Is this something new that was added?

No feature I have heard of?
Does the item still appear if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Sync Icon on Menu Bar? What does this mean? How can I get more info on it?

I just noticed for the first time, a SYNC icon on the Macbook Pro/Lion menu bar and it is going strong - twirling its little heart out. Im not sure what this is or what it is doing. Im having a feeling something got set up (I dont really know what Im doing ) that had to do with maybe syncing a calendar with Google? for an Android phone? Is t here a way I can check out what this is and what its doing - It just keeps twirling around so Im not sure what its doing or how long it will take and I dont know that I want it doing wh atever its doing. Maybe it has something to do with contacts? The only option I can find when I click on the icon, it says 'cancel sync.' Is there a way to "get info" - and find out what its doing. I dont want it twirlling forever as I assume thats going to eat up the battery...I dont have anything set up to sync consistently so I dont know whats its doing or whether I should stop it. Its been going on for like over 5 minutes and that doesnt seem right to me

If it's a one-time "glitch," you can try restarting your computer with the iPod still connected. Try ejecting again after the restart.
If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage. When connected, the iPod's "disk" is like other mounted volumes. This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk.

Trained for ADSL2+, does this look about right

I got migrated from ADSLmax over to ADSL2+ about 10 days ago, and since then the line has been training. Please could someone look at the stats below and tell me if this looks about right?
I changed from a HH1.5 to HH2.0. I was hoping to get about 19MBit/s, based on the fairly low attenuation, but it appears to have settled on 14.5MBit/s. I have left the router switched on without interruption for about 1 week now. It drops and reconnects about once per day, which I assume is normal during training. The noise margin seems to have settled on about 6dB, which I believe is fairly normal as well.
Any thoughts?
I suspect that this is probably as good as it gets for me, but would appreciate someone knowledgeable checking for me, thanks
ADSL line status
Connection information
Line state
Connected
Connection time
1 day, 16:36:51
Downstream
14,378 Kbps
Upstream
1,217 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
8.8 dB / 5.5 dB
Line attenuation (Down/Up)
21.0 dB / 8.1 dB
Output power (Down/Up)
0.0 dBm / 13.1 dBm
Loss of Framing (Local)
84
Loss of Signal (Local)
171
Loss of Power (Local)
0
FEC Errors (Down/Up)
102242 / 4294967264
CRC Errors (Down/Up)
705 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
1288

I would expect the noise margin to fall to 6db or maybe less on a good line and increase conenction speed to about 19mb again assuming good line with no noise problems - just leave it conencted and it should reduce given a bit more time
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

On my ATV home screen the menu tabs for Movies does not show nor does Netflix under the Internet tab, I have tried reset etc but nothing works

I think I have a 1st gen ATV. The other evening I got the ubiquitous "Error-HDCP content etc, try again" message. When I logged back in later, the Movies tab was gone from the menu screen as was Netflix under the Internet tab. I have tried reset, restore, unplugging etc and nothing works, any thoughts?

Welcome to the Apple Community.
If you had/have Netflix, you have the Apple TV 2.
Check your iTunes Store location is set to the correct location.

I have a Comcast Modem which is connected to a Netgear Router for my home network. I just bought the Apple Time Capsule. Do I simply take the Netgear Router offline and substitute the Time Capsule. If so does this require a new Network name and security?

The router and modem are connected t oa PC but all the other computers on the network are Apple.

You should be able to substitute the TC for the netgear.. although you might find the wireless range is somewhat less.
Power down both the netgear and the cable modem.. plus all the clients.. leave the modem off for 5min at least.. maybe 15min..
Put the TC in place of the Netgear.. you do not need to change the name, although PC will work better if you keep everything SMB compatible.. that means both TC name and wireless names, short, no spaces.. pure alphanumeric.
Power up the modem.. wait 2min then power up the TC, then the rest of the clients.. check in airport utility to make sure the TC got public iP on the wan interface.

After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!

Why does this NAT configuration not work ?

interface FastEthernet0/0
description To Cable Modem
ip address dhcp
ip nat outside
interface FastEthernet0/1
description To LAN
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip nat pool ovrld 72.186.194.72 72.186.194.72 netmask 255.255.192.0
ip nat inside source list NATOUT pool ovrld overload
ip access-list standard NATOUT
permit 192.168.1.0 0.0.0.255 log
Show ip nat translations shows no translations.
The Stats
Dynamic mappings:
-- Inside Source
[Id: 3] access-list NATOUT pool ovrld refcount 0
pool ovrld: netmask 255.255.192.0
        start 72.186.194.72 end 72.186.194.72
        type generic, total addresses 1, allocated 0 (0%), misses 0
Queued Packets: 0
I can get one device to translate with a static but the dynamic does not work.

Hey Rolf. I used the commands like you said but it will not translate anything unless the entry is static.
ip nat inside source static 192.168.1.2 72.186.*.72      is what im using to get my main node translated while i figure out this problem. The configuration worked fine until I upgraded IOS from 12.3 to 12.4. Thats when it quit translating. My config follows. Keep in ming that when i tried your commands I removed the static entry for 192.168.1.2
Building configuration...
[OK]
HEADEND(config)#do sh run
Building configuration...
Current configuration : 3267 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname HEADEND
boot-start-marker
boot-end-marker
enable secret 5 $1$vk5M$eGiHBbhKZrvPdNz0aXhve1
no aaa new-model
memory-size iomem 15
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.100
ip dhcp excluded-address 192.168.1.254
ip dhcp excluded-address 192.168.1.250 192.168.1.254
ip dhcp pool DEESPOOL
   network 192.168.1.0 255.255.255.0
   dns-server 65.32.5.111 65.32.5.112
   domain-name dbtech.netpros.com
   default-router 192.168.1.254
crypto pki trustpoint TP-self-signed-3843280569
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3843280569
revocation-check none
rsakeypair TP-self-signed-3843280569
crypto pki certificate chain TP-self-signed-3843280569
certificate self-signed 01
3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33383433 32383035 3639301E 170D3032 30333031 30333331
30305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 38343332
38303536 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BD0F 1F06509B 67D1C1F4 C9AEFA31 89A8C059 4B17CDE8 95F23275 CFB9AC41
D784F703 C25B630D A0461FB1 114B3608 B3387518 8F552DD7 41796488 F0C79FC0
103A2C3F FFE388FE 7970D921 C5F754D1 68A15518 F30F91CC 26884284 5C8C3275
B06A584D 96D2D5CB 92068B40 C05C8A4E 80E9CCE0 2DE5883F 9EF405BB 89252921
B03D0203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
551D1104 1B301982 17484541 44454E44 2E74616D 70616261 792E7272 2E636F6D
301F0603 551D2304 18301680 14E92E8B 5F671437 6F383CCD 42AD6AE8 4CC47730
F9301D06 03551D0E 04160414 E92E8B5F 6714376F 383CCD42 AD6AE84C C47730F9
300D0609 2A864886 F70D0101 04050003 81810055 7BE1410C C73F83F3 26B30B9A
569ED607 9FDCB6CD 46125795 0A8137EF 930C195B 19E79813 B6DF9B2D 6809F4A2
A5F0BDB0 03DF87D2 81643EC7 5D619E65 132B1C12 61FB212B DAEB02A2 56E63559
D931DF1F A3817AAF F21D8EE0 D0741B96 DBF52051 78964876 5AB7E319 5A051455
4EA9186D 1E9ABC81 00573284 564D6BE7 486681
quit
username derek privilege 15 secret 5 $1$rBZD$NqY/hkTEpcZV4rYqwtKAD.
interface FastEthernet0/0
description To Cable Modem
ip address dhcp
ip nat outside
duplex auto
speed auto
interface FastEthernet0/1
description To LAN
ip address 192.168.1.254 255.255.255.0
ip nat inside
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0 dhcp
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list NATOUT interface FastEthernet0/0 overload
ip access-list standard NATOUT
permit 192.168.1.0 0.0.0.255 log
control-plane
line con 0
line aux 0
This is very odd it is like dynamic NAT is just broken.

Retract Action Menu Selection for EQ - Does this require configuration?

Similar Messages

Maybe you are looking for