Retract data from BPC 10.0 to ECC

Hi All,
We are attempting to retract data from netweaver BPC 10.0 to ECC.  We have followed the how to guide (How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting,)  which details steps for version 7.5. 
We have attempted to implement the transport in the appendix of this guide which implements class ZCL_BPC_RTRCT_SUPERCLASS.  This transport fails as it is missing method GET_APPL_DATA.  Has anyone had any experience with this class in 10.0, or even 7.5?  Alternatively, does anyone have guidliness for implementing retractionto ECC in BPC 10.0?
Many thanks,
James

Hi Rich,
In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
For this retraction we are following below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
as it is Z class, i am unable to create in my system.
could you please help me.

Similar Messages

  • How to retract data from BPC Netwaver to SAP R/3

    Hi all,
    I have three questions concerning the retraction of data from BPC to R/3:
    1)Can someone explain me how i can send data from BPC to R/3 (via SAPBI)??
    2)What's a better choice => Can i do this from an infocube or a DSO?
    3)And what is the role of the BAPI's "BAPI_0050_CREATION" and "BAPI_TRANSACTION_COMMIT"
    Or are those not important?

    hi,
    The push principle shows a workaround to start an extractor from the source system.... for this you can try APDs (esp for CRM system)and open hub destinations(OH).
    or
      kindly refer to below document which describes about the COPA retraction as an example for the same
    http://tleterme.developpez.com/bw/how/HowTo_COPA_Retraction.pdf
    also below thread explain that in detail about retractionand has diff links that might be helpful to you
    Retractors to SAP ECC from SAP BI
    regards
    laksh

  • RFC Call - Retracting data from BI/BPS/SEM to ECC

    Hello Gurus,
    Since there is no standard retarctors available for SKF and New GL in BPS-SEM we developed a custom retractor.
    We call a standard BAPI to post SKF and a BDC to post New G/L.
    When we call the RFC function it asks for the user id and password to login into ECC system.
    How to handle the SAP log on screen in the program.
    Do we pass the userid and password through the ABAp program ?
    Please let me know how to handle the logon screen in the foreground and also in the background.
    Again this program will be executed in the background .
    Thanks for your help guys

    This is a duplicate post. Please close the other one.
    You should be able to set up a RFC connection in SM59 with a generic userid and password embedded. Give the userid the authorizations to process this and not much else.
    Rob

  • Data Retractors from BPC 7.5 to ECC 6.0

    We are looking for customers who can share infomation that have successfully built automated data retractors from BPC 7.5  to ECC  6.0.
    There is one whitepaper titled "How to... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I" posted back in July of 2010?
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73
    This document is a template that has some assumptions built into it for it to work.   I know customers will have different requirements, but I would like any comments from anyone who is "Live" with this.  How long it took to develop and any issues that you encountered?   How often do you run the retractor?
    We are also looking at moving parts of the budget in BPC back into Cost Based PA.  Can anyone share their experience in creating this retractor (interface) as well?
    Thanks in advance,
    Steve Boening

    Hi
    Go through eh below link for Best Practices
    http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
    [Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
    [Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
    [Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
    Regards
    Pavan

  • Best practice for retraction of data from BPC 10.0 to General Ledger

    Hi All,
    I have the requirement to retract data from BPC 10.0 to General Ledger.
    What is the best practice for doing this?
    I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
    What is your opinion on this?
    Best regards,
    JA

    Hi Rich,
    In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
    For this retraction we are following below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
    In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
    as it is Z class, i am unable to create in my system.
    could you please help me.

  • Retraction cost center plan data from BPC to ECC

    HI Experts,
    We are integrating BW-BPC.
    The client wants to Retract the data from BPC to ECC System for reporting purposes.
    u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
    The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
    A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
    If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
    What is the options to support this Business Process of getting data from BPC to SAP ECC.
    Regards
    venu
    Edited by: venu WAD on Aug 19, 2011 7:19 AM
    Edited by: venu WAD on Aug 19, 2011 10:17 AM

    Hi Keyrun:
    Please refer to slide 7 of document below.
    "SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
    >Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
    >See SAP Note 525543 for additional documentation on field mapping.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

  • How to extract data from BPC InfoCube via ABAP program?

    Hi experts!!
    I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
    I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
    Is there any difference between extracting data from BPC and standard InfoCubes?
    Thank you all!

    Moderator message - Welcome to SCN.
    But please do not cross and duplicate post.
    Thread locked.
    Rob

  • How to retract data from SRM 5.0 to BPS 7.1

    Hi eveybody,
    I need to retract the changed data from BPS (BW 7.1) to SRM 5.0.
    I am novice to BW-BPS.
    If there is no standard retractor, what is the solution?
    Can anyone send me documentation , links or steps by steps guide to explain how to do the link please?
    Thanks in advance for your help.
    I'll surely assign points if one can help me.
    My mail is [email protected]
    Nevil

    sorry, i made a mistake in the subject.It shall be :
    How to retract data from BPS 7.1 to SRM 5.0

  • Push data from sap business one to ECC with XI

    Hi,gurus:
    Have you ever configured the scenario?We wanna push data from sap business one to ECC with XI,and vice versa.
    We know that b1i have this funtion,but in our scenario,we need to create some addon table both in b1 and ecc,so does it mean that I can't use b1i in my special scenario?
    We wanna utilize XI to solve our issue,then the scenario may be abapproxy to soap,or soap to abapproxy.But the problem is, how to program in the b1 side both in sender and receiver.Do you have any information about that?

    Xinjiang,
    The method to connect SAP Business One and ECC 6 using XI would be B1iSN2007.  You could of course develop something your self using ABAP, IDoc and the Business One SDK, but B1i does this today and has 6 built in Business Scenarios.  You can of course customize the existing scenarios and/or create your own much easier and faster than creating the whole thing from scratch.
    If you are specifically interested in not using B1i ... you would want to post your question in the XI forum here on SDN.
    Hope that helps,
    Eddy

  • Remove 0 records when Exporting TXN data from BPC

    BPC Experts,
    I m trying to export transaction data from BPC from one MODEL , While exporting i wanted to ignore the records whose aggregated value is zero for the dimension member combination.
    Where i can restrict or set , EXPORT only for SIGNED DATA <> 0.

    Hi,
    Performance point of view optimization is required. As i mentioned in previous post lite optimization Closes the open request, compresses without Zero-Elimination and indexes the cube, and updates database statistics for the BW Info-Cube.
    As per my understanding there are no such prerequisite , but for safer side you can process all dimension of model.
    Also go through the links that are shared. If you required more details you can search on forum. There are lot of threads on lite optimization.
    Problem removing zeros in a model - BPC 10 NW
    http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2014/02/07/lite-optimize--a-little-guide-to-the-big-things-you-should-know
    Full Optimization and Light Optimization In Detail.
    BPC Light Optimize Configuration
    Lite Optimize - A little guide to the big things you should know
    BPC optimization performance
    Light optimize in BPC 10

  • Badi: move data from bpc cube to bw cube

    Hi friends,
    I would like to move data from bpc application(i.e bpc cube) to bw cube.  Bpc cube having infoobjects starting with /cpmb/* and bw cube having infoobjects starting with y* .
    I want to write badi code to move data from bpc cube to bw cube? is it possible to move data via badi in our case?
    I know through APD its possible to move.  Any suggestions pls. we are on bpc 75 nw sp04
    Thanks,
    naresh

    Hi Naresh!!!
    I am doing the same stuff...... and got the data read inside the BAdI and converted the comma seperated into a properly structured table... but i dont know how to send this field symbol structure to a normal table. can you help me!!!!??? can you give me your contact details.... please
    Regards,
    Surya Tamada.

  • Export Master Data from BPC to BW

    I am about embark on creating a solution to export master data from BPC to BW (NW7SP6) and I was wondering if anyone out there has covered this ground previously and has any information on this process that they wish to share?

    As of now, you could export the dimension memebr data and upload to BW info object; you may be able to do it with data manager / process chain.
    Ravi Thotahdri

  • Send Data from BPC to BW

    Hi All,
    We have a requirement to send the data from BPC->BW for reporting in BW. I am using the APD technique to do the same. My question is will this method be affected if the corresponding application in BPC on which the export query is built be full optimized?. Please explain me the pros and cons of this methodology.
    Thanks in advance,
    Vinod.

    Hi,
    In your case, there is nothing to worry about.
    When you have more than 13 dimensions (BW characteristics), the system tries to combine these characteristics into BW dimensions (different from BPC dimensions). There might be few characteristics (BPC dimensions) clubbed together into a single BW dimension. And in this case, the cube is re-designed and the technical name changes.
    However, since you have 13 dimensions, there is nothing to worry.
    Hope this helps.

  • Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

    Hi Experts,
    I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction).
    This kind of virtualcube is auto generated by BPC.
    When I do some kind of selection I obtain this error: MESSAGE_TYPE_X
    Short text of error message:
    System error in program SAPLRRK0 and form CHECK_KHANDLE (see long text)
    Technical information about the message:
    Message class....... "BRAIN"
    Number.............. 299
    Variable 1.......... "SAPLRRK0"
    Variable 2.......... "CHECK_KHANDLE"
    I have another BPC vitualprovider and this doesnu2019t happen.
    I would use this cube inside a multiprovider, that has a BI cube too, and get the data through a BEx query. But the query throws the error and stopped.
    I know that there could be problems with BPC structures (i.e. changes in tech name when transporting it), but at the moment I donu2019t see other solution to compare BI to BPC data.
    I went through other posts in sdn forum for this issue, but I am not able to get the exact solution,
    please help
    Thanks,
    Marco
    System version:
    BW:     701 level 0007
    BPC:     750 level 0005

    Hi Lokesh,
    I read the note you have indicated.
    For the first note 1479393: I donu2019t have hierarchies and the error appears in a different program to what is indicated in the note. This is where terminated:
    Termination occurred in the ABAP program "SAPLRRK0" - in "CHECK_KHANDLE".
    The main program was "GP4LQ7N6RS4RUB6HA69UREYGPKB ".
    In the source code you have the termination point in line 34
    of the (Include) program "LRRK0F05".
    Furthermore, there are no calculated measures nor members in the MDX statement, because I just try to display the data from the virtualcube.
    For the second 1448691: yes, it could be a performance related problem. Indeed, when I apply stronger filters, the error doesnu2019t occur and I got the data. But the system is already patched to SAPKW70107.
    So, do you have any other ideas?
    Thanks,
    Marco

  • Transfer class and characteristics data from 3.1i system to ECC 6.0 system

    I have to develop a program to transfer all the classes and characteristics( tcode cl01 and ct04)  in a 3.1i system to an ECC 6.0 system.
    I initially planned to use FMs BAPI_CLASS_GETDETAIL to read from 3.1i and BAPI_CLASS_CREATE to load in ECC 6.0.
    But then I realized that BAPI_CLASS_GETDETAIL does not exist in 3.1i system.
    Could anyone please tell me how to transfer the class and characteristics data from 3.1i to ECC 6.0. What approach and FMs are to be used.
    Thanks,
    Karthik

    Thanks for the reply Madhu.
    We are trying the ALE way, using BD91 and BD92. This way seems to be easier as there is no need to extract data to files.
    IDoc is successfuly sent from the 3.1i system but we are not able to see it in ECC 6.0 system.
    We are checking up the settings.
    Would be very useful if you can provide some more details about the settings to be done.
    Thanks,
    Karthik

Maybe you are looking for