Retraction of MM and SD data for planning use in R/3

Hello
Is it possible to retract Material management data and sales and distribution data to R/3  ?
Do we have any slandered method to retract the data ?
I do not have any experience in retraction , so please help me with steps , how to create custom retractor if std is not available to support above retraction .
Regards

Hi Jain,
A retractor is an SAP NetWeaver BI process to extract data and load it into SAP ERP (and R/3). Standard retractors are available for Profitability Analysis (CO-PA), Budget Control System (BCS), Cost Center Accounting (CCA), and Project Planning and Investment Management (PS/IM).
In the development of planning solutions, you often need to send planned or calculated data to SAP ERP. The target for this data may be SAP standard tables or custom tables. SAP provides some standard retractors, but does not provide a framework to retract data outside of these areas to your SAP ERP or R/3 system.
As of now SAP dosent have standard retractors in BI for SD and MM data.
As said you can use the Open Hub Destination for the same.
Cheers,
Tanish.

Similar Messages

  • Balance Sheet and Income Statement for Plan data

    Hi Everyone,
    in our Company  we maintain Plan in COPA for next year that is for 2009 , we have finished all the Planing activities and now (users asked me), they want to have Balance Sheet and Income Statement for the data we have in Plan version , I am not sure what they are Talking about, please help me ,
    where can I set up that requirement ?  and what is actually Balance Sheet and Income Statement for Plan data?
    Thx
    Niki

    Is the issue resolved?
    What did you do?
    Thanks
    Naveen

  • DIM and ODI adaptors for Planning

    Hi,
    I wish to know that DIM adaptor for Planning and ODI adaptor for planning can work with only Classic planning applications ? Are they not able to work with EPM Planning application ?
    Thanks
    Edited by: user641864 on Mar 30, 2009 12:01 AM

    ODI can extract data from essbase with a knowledge module and I believe DIM lets you create report scripts to extract data.
    These are both using the essbase adaptors and not the planning adaptor.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Creation and Modification dates for android file system

    Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
                    var file:File=File.applicationDirectory.resolvePath("amf.js");
                    var modDate:Date;
                    var createDate:Date;
                     if(file.exists)
                            try
                                       modDate=file.modificationDate;
                                       credDate=file.creationDate;
                                       trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
                             catch(e:Error)
                                      trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
    Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
    Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
    Any form of tip will be much appreciated.
    Thanks.

    I run into the same problem while working on some sort of file synching task.
    Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
    I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
    Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
    Maybe the File.applicationDirectory has different rights?
    Does anybody have a solution or workaround for this?

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

    Hi All,
    I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
    Thank you Very much.
    Regards,
    Ramesh J.

    Hi,
    Refer the below wiki link it may help you.
    Product catlog configuration for ECC - CRM - SCN Wiki

  • Start and End dates for users in Enterprise portal

    Hi Expert,
    I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

    Hello
    Please check below URL for User Import Format:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
    Regards,
    Tapan Goyal

  • How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    Hi,
    Sorry, we do not support a matrix-question field.   Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
    Thanks,
    Lucia

  • Where can I find Appraisal and IPF data for Employee for particular Year.

    Hello,
    I want to see appraisal data and IPF data for a particular employee for a particluar year.
    Please suggest Tables, Infotypes, T-Codes that I may use.
    Thanks & Regards,
    Labanya.

    Hi Labanya
    You should be able to see appraisal data through SE38 --> RHHAP_DISPLAY_DB or PHAP_SEARCH_PA.
    Hope this helps
    Best Regards
    Reddy

  • MIN and MAX date for each range

    Hi folks,
    I´ve got the following problem:
    Given a table
    create table t as select 'AT' OM_LANDTEXT, '12345' OM,
                             to_date('01-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('02-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('03-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('05-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('06-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('01-FEB-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('02-FEB-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('03-FEB-2004', 'DD-MON-YYYY') datum from dual;
    SQL> select * from t;
    OM OM    DATUM
    AT 12345 01-JAN-04
    AT 12345 02-JAN-04
    AT 12345 03-JAN-04
    AT 12345 05-JAN-04
    AT 12345 06-JAN-04
    AT 12345 01-FEB-04
    AT 12345 02-FEB-04
    AT 12345 03-FEB-04
    8 rows selected.I need to have the first and last date for om and om_landtext for each date range (where "date range" means a set of consecutive dates with no gaps).
    So the ouput should be
    OM OM_LANDTEXT DATVON DATBIS
    AT 12345     01-JAN-04 03-JAN-04
    AT 12345     05-JAN-04 06-JAN-04
    AT 12345     01-FEB-04 03-FEB-04Any ideas...?
    Thanks for your help!
    Best regards,
    Gerd
    Message was edited by: Gerd
    Sorry, I forgot to mention this should be done in pure SQL if possible.
    [email protected]

    This is the plodding, methodical approach I've always taken, which leaves me somewhat in awe of Rod West's solution.
    SELECT om_landtext,
           om,
           MIN(datum) AS min_datum,
           MAX(datum) AS max_datum
      FROM (
    SELECT om_landtext,
           om,
           datum,
           prev_datum,
           COUNT(
             CASE
               WHEN prev_datum IS NULL THEN 'x'
               WHEN prev_datum != datum-1 THEN 'x'
               ELSE NULL
             END
           ) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS grp
      FROM (
    SELECT om_landtext,
           om,
           datum,
           LAG(datum) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS prev_datum
      FROM t
    GROUP BY
           om_landtext,
           om,
           grp;null

  • Idoc type and message type for Planned Independent Requirement (PIR)

    Hi
    Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
    And also the prerequisites to use them.
    Regards,
    Lohitha
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on May 23, 2011 10:45 AM

    Hi,
    You can use IDoc type WMMBID02 with message type WMMBXY.
    Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
    Regards,
    Ferry Lianto

  • How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

    How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
    When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it.  I just need to move it out of the way to modify other portions of the document.
    thanks,
    C

    Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
    Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

  • Please help me with my electrical engineering homework : temperature control and watering system for greenhouse using labview and arduino

    temperature control and watering system for greenhouse using labview and arduino
    spesification :
    1. max temp : 28 celcius (when temperature is more than 28 celcius, fan ON)
    2. min temp : 20 celcius (when temperature is under 20 celcius, heater ON)
    3. watering system : aquaponic (grow plant and fish in separate tank but connect each other). Plant roots help filter water for fish. Fish poop for plants fertilizer. So I need a pump to distribute water.
    Please help me create VI file simulation.. I'm sorry I'm not fluent in English. May God bless you all
    Attachments:
    YOOOSHH.vi ‏88 KB

    Duplicate thread.   Please keep the discussion in that thread where you already have a response. It is also the more appropriate thread for your question.
    Lynn

  • How can we share and transfer data at Labview using the internet

    How can we share and transfer data at Labview using the internet
    Dr. Eugene Berman, Moran Kamilyan and Ravit Bar

    [email protected] wrote:
    How can we share and transfer data at Labview using the internet
    Check these links:
    Basic TCP/IP Communication in LabVIEW
    Data Sockets
    Integrating the Internet into Your Measurement System

  • Effective start and end dates for a compensation workbench plan

    Hi all,
    We are having a requirement where we want to get the data respective to current plan for reporting purposes. What i have noticed is there is no such thing as effective_start_date and effective_end_date directly in all the cwb tables.
    The different dates we are looking at to capture the data are
    enrt_perd_start_dt and enrt_perd_end_dt
    upd_strt_dt and upd_end_dt
    within_yr_strt_dt and within_yr_end_dt
    But we have same plan with different enrollment period and start dates. We are planning to use max(data_freeze_date or lf_evt_occrd_dt) to get
    the records.
    select max(nvl(bcpdx.data_freeze_date, bcpdx.lf_evt_ocrd_dt))
    from ben_cwb_pl_dsgn bcpdx
    where bcpdx.pl_id = p_pl_id)
    Catch with this is, We have 62 business groups off which only 50 might run the plan next year and ohters might not. in that case it will also return data for all the BG's including the 12 BG's where plan has not been run for that year.
    Any suggestions or help will greatly be appreciated.
    Thanks
    Hari

    Hi Ankush,
    I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
    Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
    Thanks,
    Srinivas

Maybe you are looking for