Retraction of PS from BPC/EPM to ECC

Hi All !
Have you work on retraction for PS system from EPM to ECC? Please advise. Thanks.
With Regards
Rekha

It depends on what sort of data you are going to retract. The easiest process is find the required BAPI which is going to load the data to ECC system through a RFC connection.
Once you know the BAPI, you just have to call it inside the BPC BADI ( like UJD_RETRACT or UJ_CUSTOM_LOGIC).
Thanks,
Bishwajit

Similar Messages

Best practice for retraction of data from BPC 10.0 to General Ledger

Hi All,
I have the requirement to retract data from BPC 10.0 to General Ledger.
What is the best practice for doing this?
I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
What is your opinion on this?
Best regards,
JA

Hi Rich,
In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
For this retraction we are following below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
as it is Z class, i am unable to create in my system.
could you please help me.

Retraction cost center plan data from BPC to ECC

HI Experts,
We are integrating BW-BPC.
The client wants to Retract the data from BPC to ECC System for reporting purposes.
u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
What is the options to support this Business Process of getting data from BPC to SAP ECC.
Regards
venu
Edited by: venu WAD on Aug 19, 2011 7:19 AM
Edited by: venu WAD on Aug 19, 2011 10:17 AM

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

How to retract data from BPC Netwaver to SAP R/3

Hi all,
I have three questions concerning the retraction of data from BPC to R/3:
1)Can someone explain me how i can send data from BPC to R/3 (via SAPBI)??
2)What's a better choice => Can i do this from an infocube or a DSO?
3)And what is the role of the BAPI's "BAPI_0050_CREATION" and "BAPI_TRANSACTION_COMMIT"
Or are those not important?

hi,
The push principle shows a workaround to start an extractor from the source system.... for this you can try APDs (esp for CRM system)and open hub destinations(OH).
or
kindly refer to below document which describes about the COPA retraction as an example for the same
http://tleterme.developpez.com/bw/how/HowTo_COPA_Retraction.pdf
also below thread explain that in detail about retractionand has diff links that might be helpful to you
Retractors to SAP ECC from SAP BI
regards
laksh

Retract data from BPC 10.0 to ECC

Hi All,
We are attempting to retract data from netweaver BPC 10.0 to ECC. We have followed the how to guide (How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting,) which details steps for version 7.5.
We have attempted to implement the transport in the appendix of this guide which implements class ZCL_BPC_RTRCT_SUPERCLASS. This transport fails as it is missing method GET_APPL_DATA. Has anyone had any experience with this class in 10.0, or even 7.5? Alternatively, does anyone have guidliness for implementing retractionto ECC in BPC 10.0?
Many thanks,
James

Hi Rich,
In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
For this retraction we are following below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
as it is Z class, i am unable to create in my system.
could you please help me.

Available Retraction from BPC to ECC

Hi Friends !
I would like to know how many available retractors are possible from BPC to ECC:
1) Fund Management - BPC to BI & then Standard Tcode in ECC
2) PCA - Only possible for flat file upload
Is there any more retractors? any presentation available?
With Regards
Rekha

I assume you're posting budget to ECC-FM.
Set your BPC config so that the InfoCubes and InfoObjects don't change every time you optimize
Build a BEx query on the cube containing your data
Use the standard retractor on the ECC side (there are three parts: field assignment, budget derivation strategy, actually running the FM_CYCOPIBW program)

Data Retractors from BPC 7.5 to ECC 6.0

We are looking for customers who can share infomation that have successfully built automated data retractors from BPC 7.5 to ECC 6.0.
There is one whitepaper titled "How to... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I" posted back in July of 2010?
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73
This document is a template that has some assumptions built into it for it to work. I know customers will have different requirements, but I would like any comments from anyone who is "Live" with this. How long it took to develop and any issues that you encountered? How often do you run the retractor?
We are also looking at moving parts of the budget in BPC back into Cost Based PA. Can anyone share their experience in creating this retractor (interface) as well?
Thanks in advance,
Steve Boening

Hi
Go through eh below link for Best Practices
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
[Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
[Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
[Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
Regards
Pavan

Retraction of Budget from BW to ECC

Hello,
We have a request from the FI/CO folks to retract Budget Information from BW into ECC in order for them to create reports of Budget vs Actuals.
1. Does anyone have an opinion on if this is the best practice?
2. Would it make more sense to create a realtime extractor into BW and join the data there with Budget info? Then expose this information to Business Objects via Bex Query for the users to create reports with?
3. Has anyone done this retraction before and have a link to some good information on what it will take to accomplish this task?
Regards,
Carl

Dear All,
If you have any ideas please let me know to resolve this issue
Thanks in advance

Error while retracting the data from BW system

Dear all,
while retracting the data from BW we are getting the below dump
"Inconsistent entry in table TKA07 (Plan Version Maintenance)",Request you to please help to solve the issue
Thanks,
Jyoti

Jyoti,
Could you please explain in detail, were you using any standard retractor or custom?
is it erroring out in ECC system or BI?

Remove 0 records when Exporting TXN data from BPC

BPC Experts,
I m trying to export transaction data from BPC from one MODEL , While exporting i wanted to ignore the records whose aggregated value is zero for the dimension member combination.
Where i can restrict or set , EXPORT only for SIGNED DATA <> 0.

Hi,
Performance point of view optimization is required. As i mentioned in previous post lite optimization Closes the open request, compresses without Zero-Elimination and indexes the cube, and updates database statistics for the BW Info-Cube.
As per my understanding there are no such prerequisite , but for safer side you can process all dimension of model.
Also go through the links that are shared. If you required more details you can search on forum. There are lot of threads on lite optimization.
Problem removing zeros in a model - BPC 10 NW
http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2014/02/07/lite-optimize--a-little-guide-to-the-big-things-you-should-know
Full Optimization and Light Optimization In Detail.
BPC Light Optimize Configuration
Lite Optimize - A little guide to the big things you should know
BPC optimization performance
Light optimize in BPC 10

Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed

Hello,
Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
Have you experienced something similar in other installations?
Thank you very much, and kind regards,

In relation to the previous post , we have to emphasize that we have installed in ours PC's:
MS Office 2010 14.0.7116.5000 32 bit,
EPM add-on version 10.0 SP20 (10.0.0.8993).
and our customer have installed in theirs PC's:
MS Office 2013 15.0.4675.1001 32-bit.
EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
Thank you very much

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Narahari,
Yes, we have tables for SAP BPC EPM comments and it is stored in backend BW.
Please follow the below steps to see it -
1. Go to RSA1 and find the infoprovider name for the application/cube that contains the comments For example, the infoprovider name is /CPMB/VZIKG4O
2. Then Go to SE16 and enter the comment table name. The comment tables are generated tables. You can determine there name by using the following rules:
a. The table name always starts with '/1CPMB/'
b. The rest of the name is derived from the infoprovider name - it is the first two characters after the second '/' + the fourth, fifth and sixth characters + CMT (for comments) or CMTA (for archived comments). In my case the comments table name would be "/1CPMB/VZKG4CMT" and the archived comments table would be "/1CPMB/VZKG4CMTA".
3. Hit 'F7' or click the table contents button.
4. Enter the criteria for the comments you wish to export.
Hope this helps.

Error while deploying a PAR file from NWDS into an ECC.

Hi all,
I am getting this error while deploying a PAR file from NWDS into an ECC.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
My server is running properly
1 - Where is sap-plugin.log file? I don´t find it.
2 - Could there be another file with another name with information about the error?
3 - Is there another way to deploy the file directly from the ECC?
Regards,

Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards,

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

How to get a parameter from BPC and use it in ABAP program

Hello gurus!
I got a problem...
SAP BPC will send parameters such as year, division, category, company code and so on via script logic to SAP BW.
I need to get these parameters from BPC and use them in a ABAP program as a filter.
This ABAP program will do several routines and return new values to BPC. It must be made on ABAP and I need to filter data to avoid performance issues.
Does anybody knows how to do it? or have a example of it?
Thank you in advance.
Regards,
Rubens Kumori

Hello, I'm looking for a suggest.
I need to pass two parameters (users can input them in a data manager package in bpc) to a BAdI.
In this BAdI I write a code that store those parameters in a InfoObject.
The problem is:
- one parameter is for CATEGORY value. CATEGORY is a dimension of the application and I read the value with a code like this:
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = 'C_CATEGORY'.
- other parameter is a generic DATE. this parameter is not a dimension of the application and I don't know how I can retrieve this value in BAdI.
      READ TABLE it_cv INTO l_s_it_cv
           WITH TABLE KEY dim_upper_case = '.....'.
The data manager dynamic script is:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%")
PROMPT(TEXT,%SELECTED_DAY%,"Write the date (format YYYYMMDD)",)
I also have a dynamic constant that assign the name %CATEGORY_DIM% to "C_CATEGORY" value.
Can anyone help me?
thanks a lot
Edited by: Luca Novali on Feb 13, 2012 3:49 PM

Retraction of PS from BPC/EPM to ECC

Similar Messages

Maybe you are looking for