Retraction SAP BI to SAP R/3 (ECC)

hello,
has anyone experience with SAP BW retraction into SAP ECC ?
Has anyone some possible solutions?
thanks
regards,
andreas

Hi,
Take a look at these.
BPS Retraction for Cost Center Accounting - I
BPS Retraction for Cost Center Accounting - II (Primary Cost & Qty)
BPS Retraction for Cost Center Accounting - III (Activities & Prices)
How to Retract BPS data back to R/3 when there is no standard retractor
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
Regards.

Similar Messages

SAP R/3 4.7 and ECC 5.0

Hello MM gurus!
i would like to know differences between SAP r/3 4.7 and ECC 5.0, and what makes the client to opt of the 4.7 or ECC 5.0.
Thanks in Advance gurus.
Regards,
Pieadad.

I am sorry for posting the question without searching properly. i got the answer for my question.
Regards,
Pieadad.

Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

Hi All,
My client is upgrading from SAP R/3 4.6C to ECC 6.0
We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
Thank You,
Ashok

My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns. ELM (External List Management), IDOC are some of the tools.
You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system. It also comes with batch tools to cleanse/dedup the entire systems name/address information. See Data Quality Management for SAP for further details.

Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Hi,
I am going to work Upgrade Sap R/3 4.6b to ECC 6.0
My role only Unicode enabling syntax check.
Can any one explain what are the work involved in
Custom Reports, Custom Transaction and Screens, BDC, Enhancements and Exits(BTE), Script ,Custom DDIC
Particularly need information Sapscript forms
Regards,
Ram

Hi Ram,
For Unicode, transaction UCCHECK is your best friend. It will even tell you how to fix the error.
All programs Most of the time you will just go and set the Unicode Checks Active program attribute, save, activate.
- If there are Unicode errors, fix them.
http://iorboaz.blogspot.com/2008/03/sap-abap-solution-instructions-for.html
SAPScript - Not sure if it even needs Unicode-enabling. We are still in the middle of an upgrade. Will add more later.
Custom DDIC In our case, the BASIS team handled the Unicode conversion of the DDIC objects.I think they ran a consistency check first, then run SPUMG or something.
Search the web for a Combined Upgrade and Unicode Conversion Guide.
Hope this helps.

Differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0

Hello SAP Gurus,
Could someone please let me explain, what are the main differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0.
Thanks
Sha

Hi,
Check in this link
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english

Technical differences between SAP Enterprise and SAP ECC 6.0

Hi,
Can anyone plz tell me what will change technically after the upgrade from SAP Enterprise to SAP ECC 6.0, in respect to reports, module pool programming and other technical logics?
Thx,
KK

Difference b/t ABAP4.7 and ECC6.0.
Difference between R/3 4.7, ECC5 & ECC6 anyone?
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
See this weblog:
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://service.sap.com/erp
http://www.stonewayinc.com/clients/sap/bestoftour/presentations/SAP_BOT_2_Furlan_IBM.ppt
From the ABAP perspective, few differences are.
The WS_* function modules used in 4.6c has become obsolete from 4.7C. All the WS_* FMs have been replaced by GUI_* FMs.
(ii) Concept of Unicode is introduced.
(iii) Few tables have been modified in ECC6.0.
Tables TVARV & TTREX have been replaced by TVARVC & TTREXN respectively.
(iv) we have enhancement points and enhancement sections along with enhancemnts and BADI'S . and we can write the part of code in those points.
For functional differences please check out the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Reward points for useful Answers
Thanks
Murali Poli

ABAP differences of SAP R/3 4.6 and ECC 6.0

What are the ABAP differences of SAP R/3 4.6 and ECC 6.0?

Hi
Difference between version on functionalities you can find on the following link.
Give the source version (i.e. 4.6 C) and select the target version (i.e. ECC 6.0)
http://solutionbrowser.erp.sap.fmpmedia.com/
Please check this Release notes :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/content.htm
Check if this is helpfull
Short Difference between R/3 4.7, ECC5 & ECC6 !!!!!
1. SAP NetWeaver is SAP's technology platform. It has all of SAP's
technology in it. It is used to build and run SAP Applications and customer
applications (Application server, data warehouse, portal, coding, messaging,
etc). You can find more information on the SAP NetWeaver page on the SAP
Service Marketplace (http://service.sap.com/netweaver). Of course they is
also in on the SAP NetWeaver page in SDN.
2. ABAP is part of SAP NetWeaver. BW is part of SAP NetWeaver (as of
the 3.5release).
3. Prior to SAP NetWeaver, BW was a seperate product. It is shipped as part
of SAP NetWeaver since the SAP NetWeaver '04 release (SAP NetWeaver BI 3.5).
4. SAP ECC is part of the SAP ERP application (actually it is the minimal
installation of SAP ERP). SAP ERP runs on SAP NetWeaver. So when you get SAP
ERP you get SAP NetWeaver.
- SAP ECC 5.0 is part of SAP ERP 2004 [which runs on SAP NetWeaver '04]
- SAP ECC 6.0 is part of SAP ERP 6.0 (2005) [which runs on SAP
NetWeaver 7.0(2004s)]
5. SAP NetWeaver is delivered with SAP ERP so ABAP and the functional
modules are include in SAP ERP.
6. With SAP ERP (SAP ECC) you have a choice of activating BI within the SAP
ERP system or deploying in a seperate system. This is information is in the
SAP ERP master guides which can be found at
http://service.sap.com/instguides.
For SAP ERP 6.0 (ECC 6.0) it will the SAP NetWeaver 7.0 version of BI.
Also check
/thread/170347 [original link is broken]
The only difference between ECC5 and ECC6 is that additional components like mySAPCRM, mySAPPLM, mySAPSCM, mySAPSRM are added in ECC6.0. HR was already a part of ECC5.0.
http://abdurohman.wordpress.com/2007/06/29/whats-new-in-ecc5-and-ecc6-ecc7/
Reward if usefull

SAP MDM == PI== SAP ECC, IDOC posting

Hi,
We are integrating SAP ECC 6.0 with SAp MDM 7.1 SP04 using PI 7.1 as a interface. Scenario is SAP MDM ==>PI==> SAp ECC. I would be creating record in ECC and will be posted in SAp ECC through PI. We will be creating Basic Data (MARA), Plant level data (MARC), Sales Level data (MVKE), and Valuation level Data (MBEW) in MDM. IDOC used is MATMAS05.
Plant level data (MARC) will activate various views in Material master like Purchasing, Sales plant general data, MRP views and accounting views...right
I donu2019t want to activate MRP view but need plant level data i.e. Plant and profit center to populate in MARC table. Means same Material Type but some Materials donu2019t have MRP view activated and some may have alongwith other plant related views.
I tried creating record without passing MRP related fields but still IDOC failed saying MRP type is mandatory. (Which means it is activating MRP view)
Do we have separate IDOC for MDM integration?? Do I need to enhance IDOC??
Warm regards,
Rc
NOTE - This is possible while manual creation as will as through BAPI.

Hi,
Have you checked MDM71_Material_Content.pdf page no 20.
3.3.2 Business Scenario: MDM710_Outbound.
You also need MDM PI content to install and run this Scenario..
Hope it helps if you go through MDM71_Material_Content.pdf
As you said, I tried creating record without passing MRP related fields but still IDOC failed saying MRP type is mandatory
Try passing any constant through PI Message Mapping to inbound IDOC (Receiving System, ECC)
Thanks and Regards,
Mandeep Saini

SAP Upgrade from 4.7 to ECC 6.0 connected to BW 7.0 Best Practices

We are upgrading SAP R/3 4.7 to ECC 6.0. We have been running live in a BW 7.0 environment. We have done some enhancements for 2LIS_11_VAITM - Sales Document Item Data and 2LIS_13_VDITM - Billing Document Item Data datasources. We currently have a test instance that has been upgraded to ECC6.0.
What are the best business practices for testing BW to insure data transfer and enhancements are working correctly?
Eg. Should we connect the ECC6 instance to BWD and test there OR upgrade R/3 TST that is connected BWD and test there OR Upgrade QAS and test in BWQ.
Thanks in advance . . .
Edited by: RWC on May 4, 2011 6:26 PM

Hi RWC,
the plug-in will change slightly, you may notice differences in the screens of RSA2 and others after the upgrade.
Regarding best practices: In a recent upgrade our project team decided to create a parallel landscape with a new, additional Dev and QA on the R/3 side.
We connected these new systems to a BW Sandbox and the BW QA.
We identified all datasources, transfer rules and infopackages in use in production and recorded them with related objects onto transports in BW Dev. Before the import into BW Sandbox and BW QA we adjusted the system name conversion table to convert from old R/3 Dev to new R/3 Dev in order set up all the required connections for testing with the upgraded R/3 systems.
After the go LIVE of the upgrade we renamed the old R/3 Dev system in BW Dev and ran BDLS to convert everything (speak to your Basis team). That way we made sure not to lose any Development and we got rid of the old R/3 Dev system.
Take a look at this post for issues we encountered during this project and test everything you load in production.
Re: Impact on BI 7.0 due to ECC 5.0 to ECC 6.0 Upgrade
Best,
Ralf

Best Practices for converting SAP HR data (4.7 to ECC)

Hello Experts ...
We are going from 4.6 to ECC ... no upgrade ..it will be a new implementation ...
I am looking for best practices to convert SAP HR data from one sap instance(4.6) to another(ECC) ...
I am not sure if direct input or LSMW or any other method/tool is the best way ...
Will really appreciate and award point if I can get good advise or documentation ...
Let me know if my question is not clear enough.
Thanks,

Hi
You can check SAP Marketplace and there follow the download link. You will require a SAP Marketplace login to download the Best Practices. Fortunately Best practices for ECC 5.00 and 6.00 are available there but they are country specific versions. I know HCM for US is available there.
Reward points, if helpful.
Regards
Waz

SAP AFS and SAP ECC

Hi,
As I understand AFS offers additional functionalities required for Apparel industry but does it take away or restricts standard ECC functionalities.
What If an organization is into 2 businesses i.e. Garments and FMCG, can they still go ahead and use SAP AFS for both businesses? Is there an impact on Master data, logistics related processes, Financial reporting etc?
Business processes and dynamics in terms of planning, transactions and reporting are quite different for Apparel and FMCG businesses. I am new to AFS and would request experts to guide me on such a solution proposal.
Please share your views.
Thank You
Manish

Hello Vishal,
Thanks for the information.
What about version management of ECC and AFS? I mean with release on a new enhancement pack of ECC, certain new business functionalities are offered...but with AFS being active, will it not mean that the customer has to wait till the add-on of AFS is also made compatible?
Just the way you mentioned about PP-PI issue... are there any other business functionalities that get impacted? I did come across a message posted where it is stated that free goods functionality is not available with AFS being activated.
Is there any official document from SAP on how AFS activation restricts ECC functionalities...like the one of PP-PI you mentioned?
Thanks
Manish

SAP Lumira 1.17 Connectivity with ECC 6 giving error

Hi Expert,
We're on SAP Lumira 1.17 and I'm getting attached error when I'm connecting with EC 6 via Query with SQL. I've attached the error log. Can you someone please look into this , how can I resolve this error to connect with ECC.
I'm trying

Hi Antoine,
Thanks for response.
Are you able to connect to this ECC system using either:
- a SAP tool like SAP logon
Yes, I can.
- a BI tool like information design tool (if you have access to it)
Yes, I can access. I can also connect UNX universe which is built on ECC with Webi as well. It's only in Lumira which is not working.
-Can you try from SAP Lumira changing the language used?
Yes, I tried to change different language (US and UK both) but not working.
-As the base error from your log file raised from ECC is
This error log is generated from Lumira only.
Thanks,
Pawan

Difference between SAP R/3,SAP NETWEAVER, MYSAP ERP,SAP ECC

HI,
I was really confused about the key difference between
SAP R/3,SAP NETWEAVER, MYSAP ERP,SAP ECC.
Could anyone tell me how do they differ from one another.
Regards,
sasi_s

Hi Sasi,
mySAP ERP includes function available in SAP R/3 Enterprise and additional functionalities and entire functional areas: Analytics, Strategic Enterprise Management (SEM), Financial Supply Chain Management, etc.
mySAP ERP also contains the complete SAP NetWeaver platform; SAP R/3 Enterprise includes a subset of SAP NetWeaver, the SAP Web Application Server
From this link you can get even more info on this topic :: http://www.sap.com/cis/pdf/8508.pdf
<< Moderator message - Point begging removed >>
Thanks,
Rohit
Edited by: Rob Burbank on Jan 21, 2011 5:23 PM

Routing and BOM from SAP ME to SAP ECC. Is it possible?

Hi,
Is it possible to send the routings from SAP ME to SAP ECC the way we send from SAP ECC to SAP ME.
Kind Regards
Suhas

Hello,
No it's not possible. Only ERP->ME direction is available as ERP is the source of masterdata usually.
regards,
Konstantin

HTML Page not appearing after SAP Upgrade from 4.6c to ECC 6.0

Dear All,
I am novice in ITS and IAC configuration stuff....
Issue: We have a HTML page which shows a tree structure of Functional location and Equipments. A Z transaction is built to cater the requirement. User logs on to the HTML page navigates thru the Tree structure of Functional locations and equipments and the logs the workrequest or Break down details. In 4.6C every thing is working fine. But after Upgrade in Testing Server (We are not go live yet) we are facing a problem where the HTML page with tree structure is skipped off and directly the Z transaction is appearing on the web page.
Did any one faced such issue? Any thoughts is highly appreciable?
Thanks,
Sanjay.

Thanks Frank and Dhurairaj....and sorry for the delay in responding..
I have checked my service in SICF and it is active. I also tried to create a new Service and now I am now getting "500 Connection timed out" error.
Our Z transaction is ZW03 and Service name is ZW03_2.
We are on Netweaver 7 (2004s)
Steps I followed:
1. Created a Service ZW03_2 in SICF (New Sub element) and then Activated.
default host -> SAP -> bc -> gui -> sap -> its
2. Created a folder ZW03_2 under SAP->Public->ITS (Transaction SE80, MIME Repository) and imported all MIME objects into that folder.
3. Created a Internet Service ZW03_2 in SE80. Once I created a Service already there is blank folder Topic 99. Then I created two folders Mime Objects and HTML Templates. Imported all Mime objects into folder "Mime Objects" and Created templates in "HTML Templates" folder. Then I published ..
After doing all the above setting then I tried to test the service and I am getting 500 Connection time out.
Please let me know if I missed any step or if I have done any setting incorrectly.
Thanks,
Sanjay.

Fundamental Q: SAP Business Suite -- SAP ECC u000B6.0

Hello All,
I am a newbie in the field of SAP. I am posting here a question which could be fundamentals for you guys. But beleive me it ate lot of my time on internet. Could you guys please explain me the relation between "SAP SCM & "SAP ERP Central Component 6.0 SR1, SP 14" though both are derived from SAP ERP and SAP Business Suite.
Thanks in advance.
Srcbie.
Edited by: srcbie on Apr 5, 2009 11:50 PM

Hi,
Please go through the below links.....
[SCM|http://www.sap.com/solutions/business-suite/scm/featuresfunctions/index.epx]
[business-suite|http://www.sap.com/solutions/business-suite/index.epx]
[ERP|http://www.sap.com/solutions/business-suite/erp/featuresfunctions/index.epx]
With Regards,
Krishna.

Retraction SAP BI to SAP R/3 (ECC)

Similar Messages

Maybe you are looking for