Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

Similar Messages

Authorization check on technical name for statistical key figures

Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
René

Try something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas

Program for uploading Statistical Key Figure KK01 Stattistical Values KB31

Hi ,
I need a Program through which we can upload statistical kay figure and statistical key figure values data
any one who worked on this specific requirement please send the coding
Moderator message: this is not your code factory, please do some own research first.
Edited by: Thomas Zloch on Mar 2, 2012

Read [BAPI_ACC_STAT_KEY_FIG_POST|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_acc_stat_key_fig_post] documentation. For a list of such BAPI look at [BAPIs for manual actual posting in Controlling|http://help.sap.com/saphelp_46b/helpdata/pt/34/60afcfae724effe10000009b38f91f/frameset.htm] (or more recent ones) as well as transaction BAPI. Another solution is the [sdn search tool|http://www.sdn.sap.com/irj/scn/advancedsearch?query=kb31+bapi].
[Get back if you have more precise queries|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Regards,
Raymond

Statistical key figures

what is the t-code for statistical key figures.in what tables the data will get updated ?plz reply to me.

Will tell you how to maintain SKF in SAP
1) Create new SKF
2) Map Hierarchy to SKF
3) Add new SKF to Assessement Cycle..
1 ) KK01 is
2) Map Hierarchy to SKF
means you need to plan your Cost center with SKF in T-code KP46
3) Add new SKF to Assessment Cycle..
Whenever you are creating Plan Assortment cycle in T-code KSU7, under
receiver tracing factor box, you need to select these options... Rule will
be Variable portions and Variable portion type will be plan
Stati.Keyfigure...etc
Under Receiver Tracing factor tab, you need to select your new SKF.
Regards
Satish

Fixed value Statistical key Figures based on Profit Centers - 9KE5

Hi all,
We have a Statistical Key Figure that is of Fixed Value category, based on Profit Centers. We are manually entering it in 9KE5.
Since it is of fixed value category, am I right to say that: once we enter in one period, it will automatically be updated in subsequent periods? But the current situation is, it does not update in subsequent periods, only the period which we enter.
Does anyone know how to correct this? So that once it is updated in 1 period, it will be automatically be updated in subsequent periods.
Thanks in advance!

Hi,
Yes, I saw the field and chose 1- Equal distribution.
I then select period 1, enter the quantities and save. Go back to 9KE5 and choose period 2, I expect the quantities entered in period 1 to be reflected in period 2. But this is not the case- there is no value for period 2.
I also managed to change the selection screen to have Period as select-options. If I choose Periods 1 to 12, the quantity I entered in 1 period is divided into 12, and it will only show that divided quantity. However, if I choose another Period, Period 3 for example, no value is shown.
Is this the correct behaviour? I am expecting the quantity entered in period 1 will also be shown in any other period.
Thanks!

Planning book values for certain key figures show doubled up numbers

currently on SCM 7.0, we are facing a strange intermittent issue of doubled up values in planning book for certain key figures when compared to the underlying Infocube.
This happens when the Input process step happens, some times when the process step fails in chain and is run again.
After its run then we load data to the planning book , then when the key figures show up for the current week bucket they show Doubled up values
We tried to run a consistency check /SAPAPO/OM17 (DP time series option) but no result.
Can anyone mention what could be the reason ?

Hi,
Please check the data in the cube for the codes . There could be double request for the same keyfigure. When you copy from cube whatever value avilable in the cube gets into Planning book.
Transaction : LISTCUBE
Solution : Delete the old request and check the value agina in cube. Execute the TSCUBE.
Thanks,
Jeysraj

LIS - Statistical Key figure

Hi Experts,
I am trying to create a statistical key figure with LIS. I have selected info set - Net Sales Value as key figure. system throwing the message
"No currency key figures can be processed at present
Message no. KS306
Diagnosis
You selected a key figure from the LIS describing a currency.
System response
No currency key figures can be processed using the present release.
Procedure
Select a key figure from the LIS that refers to a quantity".
Pl.Help
rajeswari

Hi Rajeswari,
while Link to LIS what are steps you followed
1) Click the Link to LIS, than one pop-up box will appear
2) Select Search by Info Stcture, than Enter
3) Select Related Item for Example 02 Purchasing than Enter
4) Select 012 Purchasing Enter
5) Select EMNG Invoice quantity
Depending the above Sequence you have to Select, Amount will not take the above sequence...

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Disaggregation of Key figure not in proportion at monthly bucket

Dear Expert,
Please find the below case.
Here Key figure 2 is disaggregated based on Key figure 1 (Calculation Type P) also we maintained Time based disaggregation K.
The issue is - if you check total, it is 13 for both key figures as shown in below screen shot.
But region wise (Detail level) if you checked, it is not in 1:1 proportion and it is causing problem for us.
For example Region 2 having value in KF1 as 2 for Week 11.2015 but after disaggregation it got nothing on KF2.
(The reason is Key figure 2 is having value in week 12 and week 13 and nothing in Week 11)
We tried 2 different approach to get 1:1 proportion in Monthly bucket, but it could solve our problem.
Approach 1-After Key figure2 calculated in Weekly bucket, Reset Key figure 2 at total level in Monthly data View and enter the Total of Key figure 2 at Total level in Monthly bucket.Check the result at detailed level.
But in this case it is calculated for week 10, 11, 12 and 13 as 0, 9, 3, 1. (We want Key figure2 as per original calculation i.e it should be 12 and 1 in week 12 and 13 respectively)
Approach2 -
Approach 2 - Add another New Key figure as Key figure 1 Total- which sum the Key figure1 at detailed unit at Month level and then disaggregation of Key figure2 based on this new KF.
Its working for this scenario but different scenario is not working.
For example- here region 3 and 4 affected.
If disaggregation at Month level is corrected, our issue will be resolve.
Waiting for your feed back.
Thank you
Sachin

Hi,
In Planning Area u2013 Key Figure settings, did you try to use u2018N - No disaggregation in timeu2019 for KF2 key figure ?
This will mean that copying will occur in technical periods of the storage bucket profile and not the way it happens now.
Other option:
Now, you storage bucket profile and also the planning bucket proifile are in Days/Weeks/ .Months
Is it necessary for your user to view data in daily buckets ? Can the user view the data in weekly buckets only (and not in daily buckets) ?
Your planning bucket profile can be in Weeks/..Months .
This way your displayed data will be in weekly buckets.
Regards
Datta

How to find key figures not created in a Structure.

After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.

Thanks for such a quick response.
I am assuming the following about the table :
-     Column u201CCALDAYu201D contains a date value for each day the Index is active.
-     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
-     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
-     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
-     Column u201CBIA_TECHINAu201D ????????
-     Column u201CBIA_INAu201D ???????
-     Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

ABAP-Coding for EVERY Key figure in infocube 0RT_C02

Hello gurus;
      Does anybody know which is the reason for Abap-coding for every key figure in infocube 0rt_c02 from InfoSource 2lis_13_vditm?
Thanks in advanced!
Csr

Hi,
this is done like this in the business content because the extractor is providing the data with a process key; this process key is then translated into meaningfull business objects (key figures);
fro instance ProcessKey 202 in application SD is reflecting Credit memos:
* Credit Memo
IF COMM_STRUCTURE-PROCESSKEY = '202'
    AND COMM_STRUCTURE-BWAPPLNM EQ 'SD'.
* currency convert
    IF COMM_STRUCTURE-COST <> 0.       "Value in document UNIT
      PERFORM LOC_CURR_CONVERT
        USING    COMM_STRUCTURE-COST   "Value in doc UNIT
                 COMM_STRUCTURE-TRANS_DATE     "Date for exchange
                 COMM_STRUCTURE-DOC_CURRCY     "Document Currency
                 COMM_STRUCTURE-LOC_CURRCY     "Local currency
*                COMM_STRUCTURE-EXCHG_RATE     "Exchanging rate
                 COMM_STRUCTURE-/BIC/ZEXRATEAC "Exchanging rate Acctn
        CHANGING RESULT.
* the KPI's must be turned to positive because the SD-extractors
* allways deliver them neg. if it's a process back (e.g. return order)
      RESULT = RESULT * ( -1 ).
      UNIT = COMM_STRUCTURE-LOC_CURRCY.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    ELSE.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 4.
    ENDIF.
ELSE.
* if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
the above routine is quite self explaining the code.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Property u201Czero allowedu201D must be identical for all Key Figures.

I am having the following error message when trying to run a Statistical Forecast in the Background. The job cancels out and I receive the error message: Property u201Czero allowedu201D must be identical for all Key Figures.
When I look in RSA1 under Key Figures Details "zero allowed" appears to be checked for all Key Figures. Can anyone point me in the correct direction I've already tried searching and did not find the answer.
Thanks.

HI,
The setting is not in RSA1 but is in /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network Planning
choose the relevant Planning area right button click on the Planning area choose change key figure settings. From here you can check the flag Zero allowed for the key figure that Stat. FCST is generated.
Best Regards,
Ivo Stoyanov

Exception aggregation for calculated key figure

Is it possible to have exception aggregation for calculated key figure in BW 3.5? As per Note 1151857, it is possible, however this note applies to BI 7.0.
As per note 152638, it is possible in older version only simple ckfs like 'CKF = Base key figure'.
Is there any workaround to define exception aggregation for complex CKFs in BW 3.5?
My requirement is like this -
CKF = (sales quantity - forecast) %share (sales quantity).
Aggregation for CKF over time should be sum whereas, for all other characteristics calculation of CKF should be done after aggregation(normal scenario).
So, defining exception aggregation of CKF as 'Summation' over time should fulfil my requirement.
I can not use calculate result as 'summation' setting for CKF because of following design of report.
Report contains structure(characteristic)
Elements of structure are -
Last 3 months(April - June)
Last 3 months - 1 (Mar - May)
Last 3 months - 2 (Feb - Apr)
and so on...
When data is aggregated for each element of structure, base KFs will be aggregated and calculations will be done on that.
Changes in the backend are also not possible because, normal aggregation of CKF-alike in backend will be summation for all characteristics.
Is there any way in BW 3.5 to model such a scenario?
Thanks and Regards,
Anup Kulkarni

Sum of individual values of CKFs is not same as the Calculation on 'sum of basic key figures(result of basic key figures)'. - Yes, you are right.
I need to aggregate CKF over time as SUM. However, calculation for result of all other characteristics should be based on results of basic key figures and not the 'Sum of individual values of CKF'. -
What i understood is that whenever the time char is in row, then result should be simple on the sum what ur getting but when other char are there then it should go for calculation based on the sum of key figure.
If im not wrong in getting ur point.
How can two differenct activites be perofrmed on same key figure depending on the characteristic .....!. For this u have to think some other possibility or let somebody else update the thread.

No split for particular key figure while "Time Distribution in Update Rule"

Hi experts,
I wanted to have data in the infocube at day level. Currently it has only week level data. So I used "Time Distribution in Update Rule". Due to this am able to split 0Calweek data at 0calday.
But while using "Time Distribution in Update Rule" all key figures are getting split by same way. For e.g. key fig1 has week level data as 100. so after getting split in calday, it is apperaring as (100/7) 14.285 . for every day.
But i dont want to happen this split for every key figure. For some key figures value "100" should be as it for every field in calday. for e.g. 100 should not get divided by 7 and posted as 100 only for all seven days.
How can i achieve this? Is it possible if i write formula or routine for particular key figure so that split should not take place for that particular kay figure? Or is there any other to keep exception?
Please help.
Thanks

Hi,
This is one of the limitation of Time Distribution that you can not have it by individual key figure. Check the below article for more information,
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e1096a-e058-2c10-06b7-c66f9a82a9c8?QuickLink=index&overridelayout=true]
I think in this case you will have to write individual routine for each key figure instead of Time Distribution approach.
Regards,
Durgesh.

Retractor for Statistical Key Figures Not Sending Values

Similar Messages

Maybe you are looking for