Retractor

Hi all,
I want to pass data of infocube in BW-BPS to R/3.
Could anybody help me?
Thanks.

Kae,
What is the application area who are working on?, like cost center , sales, etc.
For a couple of areas SAP delivered retractors. One such case os cost center planning.
For the application areas that do not have retractors, you have to work around.
Let me know which application area and I can give you some inputs.
Thanks
Ravi Thothadri
[email protected]

Similar Messages

  • Data Retractors from BPC 7.5 to ECC 6.0

    We are looking for customers who can share infomation that have successfully built automated data retractors from BPC 7.5  to ECC  6.0.
    There is one whitepaper titled "How to... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I" posted back in July of 2010?
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73
    This document is a template that has some assumptions built into it for it to work.   I know customers will have different requirements, but I would like any comments from anyone who is "Live" with this.  How long it took to develop and any issues that you encountered?   How often do you run the retractor?
    We are also looking at moving parts of the budget in BPC back into Cost Based PA.  Can anyone share their experience in creating this retractor (interface) as well?
    Thanks in advance,
    Steve Boening

    Hi
    Go through eh below link for Best Practices
    http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
    [Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
    [Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
    [Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
    Regards
    Pavan

  • Retractor for Statistical Key Figures Not Sending Values

    I have configured the standard retractor for primary costs and stat key figures based on all the documentation.  Primary costs retract perfectly.  Stat Key Figures do not send over the values.
    I have configured UPBR_RETRACT with UPB_RET_STKEYFIG.  In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY.  I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube.  In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
    From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56".  All of this tells me things are running fine.  My parameter group is setup as follows:
    Retr. R/3 Comp.          6
    Retractor Control          3
    Delta Update          0
    Destination          DE1CLNT209
    Test mode Is Active          0
    I go over to ECC and look at KP46.  The stat key figures by cost center have been transferred but the planned values all show 0.  When I go to table COSR, I see 0 in the planned fields. 
    Has anyone had this issue and do they know how to solve it?
    Thanks,
    Cherie

    Dear Chrie,
    Can u explain,  what are the keyfigures that are not getting retracted to R/3?
    If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
    If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
    Regards,
    Srinivas Kamireddy.

  • BPS CCA Retractor setup

    Hi All,
    I am new to BPS and and am trying to set up the functionality for Retraction of data from SEM to R/3.
    But when I go to the transaction (as mentioned in SAP Help)
    Business Analytics -> Financial Analytics -> Cost Center Planning -> Cost Center Planning Administration,
    I am not able to find the same.
    I am working on SEM-BW 4.0 and BI_CONT 3.5, is the same transaction replaced with the one mentioned below here
    Business Analytics -> Financial Analytics -> Cost Center Planning -> Customizing -> Settings in the Planning Environment
    Moreover if I try to go to Settings in the Planning Environment, it gives me the error message as below:
    Planning profile 4EXPPL01 does not exist
    Message no. UPC_FW050
    Can anybody suggest what am I missing. Thanks for your help in advance
    Anurag

    Hi,
    I could activate the Content using the option that you had suggested, but am still stuck up with the Retractor setup.
    I have done the steps as mentioned in SAP Help, but have not been able to retract data into R/3.
    Below are the steps that I did and the problem :
    1. Select one of the existing planning levels the selection of which contains data that you want to transfer back into the operational system, or create a suitable planning level.
    2. Create a planning function of the type “exit” in the context of the planning level you selected.
    3. Enter the names of the function modules in the fields intended for this:
    Function module = UPR_COST_PLAN_EXEC
    FM initialization = UPR_COST_PLAN_INIT
    4.  Make the assignments of parameters to data elements under Parameter Exit Functions:
    5. In the list of fields to be changed, selected the following characteristics:
    Cost center (0COSTCENTER)
    Cost element (0COSTELMNT)
    6. Create a parameter group for the planning function.
    7. In the parameter group, entered the parameters created in the context of the function.
    8. To start the retraction, select a package of the planning level and then execute the function with the parameter group.
    Once I execute the package I get the following message
    27 data records were read, 0 of them were changed, 0 generated
    Message no. UPC224
    Having done the above, I am not clear
    what are the steps to be executed subsequent to this, and if I need to create the sender structure where and how I could create the same.
    Moreover once the data is retracted into R/3 is it visible in transaction directly in KP06/KP07 or do I need to view the same in some other transaction/table or is there some processing step involved there also.
    Looking forward to your suggestions
    Regards
    Anurag

  • Any idea on How to work SAP retractors for CCA,PS, PCA

    Hi guys...
    I need to work on the SAP retractors .. Do any one have documentation or methods?.
    Thanks in advance
    regards
    AK

    Hi Diogo,
    Thanks for the answers. I am bit confident to work on. Will try to find more from forums also..
    If anything will post again with my findings and issues.
    Thanks again...
    Regards
    AK

  • Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

    hello
    are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

    You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

  • Implementation of Custom Retractor in Cost Center Planning

    Hi All,
    I am facing a problem regarding Implementation of Custom Retractor.
    In our Project TM1 Server which is presently existing is to be replaced by BI server for Cost Center Planning.
    The value needs to be retracted back to the R/3 server for poplutaing the  Source Table fields.
    Now our Business requirement is best suited by implementing a Custom Retractor which would fetch the data from
    BI back to R/3 Server.I have some queries regarding this implementation.
    1> The Data load Function Module & Post Data Load Function Module which is implemented for Data loadinf into R/3 server
    is written in which server (BI / R3)? If its written in R3 as the case seems them how the BI table type needs to be declared in the
    function module?
    2> What the  Function Module is returning ..is it directly updating the DB table or returning a structure?
    Our project is still in the Realisation Phase....So no development has began yet....
    Eagerly waiting for your response.
    Thanks a lot..

    Hi Uryikin,
    Thanks for your response.
    Standard Retractor does not satisfy the Business requirement in full.
    The RFC connection you have suggested is what we are implementing through RSPLAN function Type creation.
    In the RSPLAN we are implementing a Class which will fetch the Data from the Infoobject.
    This infoobject will be fed from the target Infocube. After this Class getting populated Mapping will be done b/w BI source fields and the R/3 source fields.
    Now the problem arise when a Function Module needs to be created that will actually bring the data to R/3 side.
    The server where  Data Load function Module is to written is still unknown to me..
    The Function Module Return type is also unknown...
    As this is totally customised we have to identify the return type for submission of Blueprint...
    Kindly refer to this link we are implementing this same steps only on different scenario...
    http://www.docstoc.com/docs/25252336/MDX-The-Basis-for-SAP-NetWeaver-BI-Third-Party-Interfaces/
    Please Reply...

  • SEM BPS Retractor post wrong decimals in R/3

    Hi All, we are implementing SEM-BPS for Sales planning and retracts back to COPA. The currency we are using now is KRW and it has been set as 0 decimals in TCURX table in both BW and R/3.
    The BW and SEM layout displayes the correct figures. However, when retracted to R/3, COPA displayed the figure multiplied by 100. We are really puzzled why so... but when we do debug in the KELR tansaction, seems that they are passing the DB values to R/3 and then multiplied by 100 before posting into the DB in R/3... probably due to the 0 decimals set as well in R/3 KRW currency.
    Anyone has any idea?
    thanks

    Hello,
    We are doing something similar except that we are retracting from BW back to ECCS via transaction CX7B3.  We are experiencing the same type of problem when sending data to R/3 for amounts whose currency exists in the TCURX exception table.
    Would anyone know of an OSS Note to fix this retractor similar to the note Marc Bernard found (or more likely coded himself) for the COPA retractor?
    Any help would be appreciated!
    Thanks.

  • Retractor to R/3 FM module

    Hi,
    I would like to know if there are any standard retractors available to retract the BPS Budget data into R/3 FM module ?? and what are the steps to retract data to R/3 FM ??
    Thanks

    Shalini
    Check this link if it helps
    http://help.sap.com/saphelp_nw04/helpdata/en/ce/9e71403017587ee10000000a155106/frameset.htm
    Thnaks
    sat

  • Retracting acitvity input using CCA retractor

    We are using the upr_cost_plan_exec retractor FM to retract hours to R/3. The parameter group setting are as follows:
    Retr R/3 Comp - 9 (PS)
    Retractor control - 2 (Activity input)
    In the sender structure I have mapped the hours to 0QUANTITY in upb_snd_cops.
    The function executes without error in BPS, but we are not able to see the data in R/3.
    Has anyone successfully retracted a quantity using this retractor FM? What could be going wrong?
    Is there an error in the FM causing this?
    In the LUPREF02 include of the FM I found the following commented out, is this the reason why quantity is not being retracted.
    quantity not used in primary costs
    assign component gf_quantity of structure <ls_kyfs> to <l_chavl>.
    g_quant = <l_chavl>.
    Is there an OSS note out for version 31B? I found an OSS # 889634 but for higher versions.

    Hi,
    In the program LUPREF01, the BAPI BAPI_COSTACTPLN_CHECKPRIMCOST fm is being called. break before going into this FM and get the structure of data being passed. Simulate/Test the same FM in R3 with the same structure of the data.
    Pls. check the object number (for the WBS elements), it has a CONV exit. Test/check with different representation of the object number, that should guide you, what's wrong in BPS side.
    HTH.
    Regards,
    Nataraj.

  • Error in CCA Retractor

    Hi there,
    This time I had strange messages while implementing CCA retractor and found following -
    Error - You have no authorisation to change planning of Cost center DE1010511.
    When I debugged found that below function module was throwing errors.
    BAPI_COSTACTPLN_CHECKPRIMCOST
    Does this mean that I dont have access to this cost center or its the ALEREMOTE user?
    Anybody has an idea on this.?
    regards
    GRai
    Edited by: G Rai on Jul 2, 2008 10:20 AM

    Hi Rai,
    Your RFC connection user Id does not have the authorisation for the cost center planning in the target system. If you give the necessary authorisation, it should work.
    Regards,
    Mike

  • CCA Retractor..

    Hi,
    I am wondering if any one successfully implemented CCA retractor in version BW-BPS 3.50?
    Thanks
    CN

    Hi CN,
    Have a Look at these threads . .
    CCA Retraction with BW BPS
    Retraction into CCA with Public Sector extension
    Regards,
    Mohan

  • PCA Retractor-Do we have Standard? Or do we need some customization

    Hi,
    We are planning to do PCA retraction.I am an ABAPER and novice to BW .
    Pls share your experiences and recommendations.
    Rgds
    Praveen

    follow these links. There are some good blogs and information here :
    /people/praveen.mayalur/blog/2006/08/24/how-to-retract-bps-data-back-to-r3-when-there-is-no-standard-retractor
    /people/praveen.mayalur/blog/2006/07/01/bps-retraction-for-cost-center-accounting--i
    /people/praveen.mayalur/blog/2006/07/11/bps-retraction-for-cost-center-accounting--ii-primary-cost-qty
    /people/praveen.mayalur/blog/2006/07/17/bps-retraction-for-cost-center-accounting--iii-activities-prices

  • Retractor from BW to R3 Demand Management

    Dear all,
    I want to know if there is any standard retractor from BW to R3 Demand Management. I am already aware of KELR which retracts data from BW to R3 CO-PA.
    Regards
    Sapna

    Hi,
    If you are talking about sales DM THEN
    Using Openhub in BW and collected sales plan quantities in a openhub table. This table is read by a program which is triggered in R3. This program selects data from BW table and inserts to R3 S076 table. S076 table stores SOP data and can be filled by a program.
    reading data from bw:
    CALL FUNCTION 'ZBFL_BW_BTC0001' DESTINATION p_dest
    TABLES
    t_s076 = t_bwtab
    EXCEPTIONS
    program_error = 99.
    IF sy-subrc IS INITIAL.
    WRITE:/ text-001.
    ELSE.
    WRITE:/ text-002.
    ENDIF.
    ENDIF.
    adding sales figures into SOP table
    LOOP AT t_r3tab.
    INSERT S076 FROM t_r3tab.
    IF sy-subrc IS INITIAL.
    WRITE:/ text-005 , sy-dbcnt.
    ELSE.
    WRITE:/ text-006.
    ENDIF.
    ENDLOOP.
    function in BW
    FUNCTION ZBFL_BW_BTC0001.
    ""Local Interface:
    *" TABLES
    *" T_S076 STRUCTURE /BIC/OHBTC0001
    select * into table T_S076 from /BIC/OHBTC0001.
    ENDFUNCTION.
    Regards
    Ram.

  • How to do a Retractor to send data from SEM-BPS to R/3

    Hi Folks!
    Can someone say to me how to do a Retractor, step by step, to send data from SEM-BPS to R/3.
    Thanks a lot in advance for your input!
    Rocío.

    Hi Thorsten,
    Yes, I know it. But I didn´t want make it make through queries.
    I have read than for CO-PA there are standard functions that send the data to R/3, but I cannot make they work to me.
    And in addition I will need to also create other Retractors for RRHH, and there are not standard  functions.
    For that reason I needed know how to create a Retractor step by step.
    Regards,
    Rocío.

Maybe you are looking for