Retransport one transport request

Hi gurus.
Is there any way to retransport one request?.
I want to know this because I tried to transport in STMS but it gives me an error and it appears a truck icon.
It is important because I have a lot o objects in this order and I prefer copy this request than create one new.

HI
FOLLOW THE LINK
transports?
Transport Request
regards,
sharad.
Edited by: sharad narayan on Apr 18, 2008 12:12 PM

Similar Messages

Info-objects of an Info-provider under one Transport request

Hi All,
I am in the process of transporting the Objects from development to QA environment,
As a first step in the transport process, i need to transport the info-objects before transporting other info-providers, transformations etc,
i have several info-providers like BBP_PO, SC, SCA etc, which inturn has more than 100 info-objects that needs to be put under seperate transports.
Say i have info-provider ZBBP_SCA which has 50 info-objects, i need to put those 50 Info-objects in one transport request and then info-provider ZBBP_SCA in another transport request and then its transformations etc.
Can anyone tell me the steps of only collecting the necessary info-objects of ZBBP_SCA alone to be put under one transport.
I tried to do that, but it is collecting all the info-objects, info-areas related to ZBBP_SCA, instead of collecting only necessary objects of ZBBP_SCA.
I will assign points for sure
Can anyone help
Thanks in advance
Pooja

Hi pooja,
So your intention is not to include anything other than target in second request.
For this right click over the object from where you dont intend to transport and say donot transport any below in transport connection.
The reason for target also showing the info objects and so on is that they are all necessary to form this cube definition.
Anhyhow, as you have ensured to collect them seperately go ahead with the approach mentioned above.
Naveen.A

I have created two tables for my new report under one transport request.

Unwanted table transported
I have created two tables for my new report under one transport request.
But I only need one table and the second table I was supposed to delete.
However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
how to handle this issue.
I am not sure any additional changes for this program.
Could you please suggest me an idea.
Thanks in adv

>
sam kumar wrote:
> Unwanted table transported
> I have created two tables for my new report under one transport request.
> But I only need one table and the second table I was supposed to delete.
> However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
>
> how to handle this issue.
>
> I am not sure any additional changes for this program.
> Could you please suggest me an idea.
>
> Thanks in adv
Does one custom table more or less really matter? If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

All the table objects in one transport request..?

Hi Friends,
I do have more than 10 tables and each table is having more than 30 fields.
All these Tables, Data elements and Domains are created by me.... means name start with 'Z'.
My task is i need to save all these objects in one transport request number.
How can I do that...?
All the eariler transports are released to higher system....
As of my knowledge, going to each table & data element and domain... changing some text and then it will ask for new requestr and saving....
Can i do that in a single step for table and its fields (DEs Domains).
Thanks,
Naveen.I

Hello Naveen,
In SE03 transaction ,execute the merge object list. ( if u are not authorized to SE03. Goto SE10 transaction and click the transport organizer tool in the tool bar (shift+F6))
Input all the transport request you want to merge and select the release check button ( as you says that your transport requests are already released ). and the execute and click the merger button in the top left corner. it will be asking new transport request. Create a new workbench request. finally you will be getting the popup message. select any option as ur convenient ( either online or background). then all the development you have done in different transport request will merge into one TR.
Hopes this will helps
Regards
Laxman

Change object from one transport request to another

Hi,
I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
contains some inactive object. I have also tried to delete that object from this transport request and put in another one
but when i tried to do that i was only allowing me to create sub task within the same request .
Kindly suggest me
Thanks
Parag

Hi,
you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
Rgds.
Roman

One Transport request objects copy into new transport request

Dear Experts,
I created a transport request under which i saved my objects. <b>Now i need to copy old request objects into new request or split that transport request into number of new transport requests.</b> First of all It is possible or not , if it is possible please tell me the solution how to do.
Regards,
Krishna

Hello Krishna
You can
(1) add object lists of already released requests ("old" requests) to you current request (still changeable)
(2) merge changeable transport requests together
(3) split a changeable request into several requests
Whereas (1) and (2) are supported by standard functions of the SAP system (3) is a manual task involving the following steps:
a.) Create a new request
b.) Copy required transport entries (e.g. R3TR TABL ZMYTABLE) from one request to the new request
c.) Delete all copied transport entries from the object list of the "first" request
However, if you are not fully aware of the dependencies between different transport object entries the splitting of object lists may cause hassle when you import the splitted requests into the next SAP system.
Regards
Uwe

Moving object from one transport request to another

Hi Gurus,
Am Having one query that i have been done some changes in the report and saved on one transport reuest number,but one function module which i have beeen used in the program saved in diffrent request and it contains some other objects,now i can i individually move the FM to other transport request number,Give me some ideas.

Dinesh,
If the requests are not yet released then you can delete the object from the TR manually and then add it to the other TR manually or tag by doing a minor change.For ex
TR 1 Objects list
REPORT ZXYZ
TR 2 Objects list
REPORT ZABC
FM ZZASDEF
1.If both the TRs are not released then remove the FM from the TR 2 manually and add it manually in TR 1,provided you know how to add the objects manually.
or
2.If both the TRs are not released then remove the FM from the TR 2 manually.Go to the corresponding objects of the FM do a minor change,save,activate.Now it will ask for a TR,at this time choose OWN REQUEST and select TR1.
Thanks,
K.Kiran.

How to move objects from one transport request to another transport request

Hi Experts,
When I am changing the code I selected the wrong the transport request number. I want to move my objects into another transport request number in the same DEV and same client number. Could you please help to move these objects between the transport request numbers.
Thanks,
Chinna.

Hi Chinna,
If you need to change a transport request number, you can use TCODE SE80
Click on Repository Browser tab
Then Select the Object(s) you want to change the Transport Request number
Right Click > Other Functions > Write Transport Entry
After that you will need to specify other existing Transport Request number OR create a new transport request number (F8).
Hope this is what you are looking for.
Thanks
Rohan

Porblem while transfering objet from one transport request to another

Hello all,
My goal was to change objets from a task TA(source) into a transport request RA to the task TB(destintaion) into the transport request RB.
I used SE10 function on transport request RB(destination) and used function "Include objects" (Ctrl+F11) and then provided the source transport request (RA).
Te result is :
- source transport request RA remain unchanged
- in destination transport request RB a line as been added :
comment : object list included : and the name of source request RA, it look like a reference
Expected result was :
- objet are no more in source request RA
- the are assigned to destination request RB
What point did I miss ?
What can I do from this point to obtain expected result ?
Thans for your help,
Regards

I found an easy way to delete the reference line :
in SE01, display TR that contain reference line, double click to get the objects list, switch to change mode and use delete row function.
So at this point, my question is :
what is the appropriate way to change object from a transport task to another ?
Thanks for help,
Regards

How to move an object from one Transport Request to another TR

Hi,
I have created an object under one TR instead of Required TR.
Now i need to move that object to apropriate TR.
Please suggest me the way.
Thanks,
Sekhar.J

Go to SE10 select the Request and press Include Objects button( a box with a arrow above it) and select freely selected objects and add your object to the request. Before doing this you may be required to delete the object entry from the source request.
Regards
Karthik D

How to send the transport request from one client to other client?

Hello Friends,
I have generated one transport request in one of the client in Development server.Now as it is customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
Thanking you guys in advance.
Regards,
Jitendra

Hi Jitendra,
Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
Hope the above clarifies your query.
Regards,
Vivek
Edited by: Vivek on Mar 16, 2009 1:05 PM

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

Transport request for BW queries and roles.

Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
Hardeep

Thanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

Protech Transport Request in SE09.

Hi Folks,
I have protected one Transport Request in SE09. I have done that as my objects locked in that request are being unlocked and getting deleted from req. So, I have protected that.
But, still i want to know exact functionality of that Protecting Request.
And please let me know how to unprotect that.
Thanks in advance
Peter

Hi Peter,
If you want only the owner of a request to be able to add more users, then you can protect the request.
To do this, select the request and choose Request/task ® Request ® Protect.
Use the Remove protection function to remove this restriction.
check the below link for more information:
http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e2044eb711d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/b6/b40613a44411d1846d0000e8a57770/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c824ba111d189750000e8322d00/frameset.htm
Regards,
Ravi Kanth

Transport Request Deleted

Hi Experts,
I deleted some cubes, DSO's, MP and objects which is not required in Dev. and collected all these in one Transport Request, but Unfortunately some one deleted this TR before releasing into QA. Now i dont have all these cubes, DSO's, MP and objects as well as Transport request in Dev, now i want to delete in QA. how can i achive this?
Directly deleting in QA is ruled out even client is not accepted.
Can any one help me out on this?
Thanks in advance
David

Hi ,
Please check the following link :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd5f36611d3a6510000e835363f/content.htm
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd2f36611d3a6510000e835363f/content.htm
Thanks
Kamal

Retransport one transport request

Similar Messages

Maybe you are looking for