Retrieve Addresses from .Mac

Somehow my iMac dumped all the addresses in my address book. Nowhere to be found on the computer. I backed up to .Mac account with iSynch but how do I download them back to my desktop?

1badfrog,
Welcome to Apple Discussions.
How to reset .Mac Sync has a step-by-step procedure for resetting Sync data.
Your circumstances dictate that you should/must modify Step #5. In your case it should read: Click the left arrow button so that the orange arrow flows from the .Mac icon to the Computer icon in the window, and the text above the icons says "On this computer sync info from .Mac."
;~)

Similar Messages

Obtain IP address from Mac address

Hi all,
Is ARD capable of obtaining IP addresses from mac addresses?
Please advise.

ARD's System Overview can display IP addresses and MAC addresses for computers it manages. If you're asking whether ARD can scan a network for a particular MAC address and return the IP address for a computer that's not in ARD's list of managed computers, then no, it can't (at least not by any method I know of). ARD is really not a network scanning/management application; it's for managing Mac workstations.
Message was edited by: Dave Sawyer

Function Module to retrieve Address from the table ADRC

Is there any function module available to retrieve data from ADRC by using the ADDRNUMBER as input

Try using FM: ADDR_GET
This has import parameter ADDRESS_SELECTION which contains ADDRNUMBER.
Hope this helps.
Please reward if it works.
Vallabh.

What kind of sata interface do i need to retrieve data from mac 2009

ATTENTION MAC GEEKS!!! My warranty has run out on my macbook and I have a corrupted hard-drive. After mistaking the display adapter port on my macbook 2009 for a thunderbolt port (wishful thinking on my part) I finally realized this version of macbook does not have any type of firewire OR thunderbolt port, and neither does the mac I borrowed to use as a target drive through which to run data rescue software. I did come across some people saying they used ethernet to interface the two macs, so after trying forever to set that up with no luck I found references to a "migration" applet that I would need to download to both computers. Since one has a damaged hard drive and will only boot from the install disk (but cannot be repaired with it), I can't exactly download the "migration" applet and the support documentation for my data rescue software states that an ethernet connection will not work at all anyway! Unfortunately my time machine died about six months ago, and all I really, really, really REALLY want is access to my documents folder on the macbook with the corrupted/damaged hard drive. The software documentation does say that a SATA connection will work and allow my second mac to scan the broken mac h/d. I've come across some usb - sata connections, but have also come across articles saying that using any form of usb connection to run a scan on a h/d won't work as usb (older usb, probably 2.0) is too slow. Darn, darn darn. I hadn't wanted to open the macbook if I didn't have to, but as I have to I will. However I don't feel comfortable making a sata to sata connection between the two drives as the second machine does not belong to me. How should I approach this? I am just sooo.....grrr about the missing ports on these Macbooks. I really hadn't notices as I never had to do this before! Any suggestions/help would be appreciated !!! would it work using this usb/sata connection? And so I don't get even more surprises, do all sata work on all h/d's? I used to network and maintain pc's, even setting up secondary h/d's but those were desktops and it was a few years ago, AND everything Apple just seems so...proprietary to me. PLEASE HELP!!!

You can replace the internal disk with a new one and then reinstall the operating system. As you do that, save the corrupted drive and place it in an external enclosure which you then plug into your working MacBook. You can then try to salvage data off of the corrupted disk (if possible).
For a new internal disk you might as well purchase a 1 TB fast hybrid SSD-disk since it only costs $105 and will speed up your system considerably. The following reference will include the external enclosure you will need into which you can put the corrupted disk. http://eshop.macsales.com/item/Toshiba/YTOS1TBHYS/ . You can find instructions for the repair at http://www.ifixit.com/Device/Mac_Laptop.
If the corrupt will spin any you cannot retrieve the files using the Finder then try using DiskWarrior, uFlysoft, or McAfee Data Recovery for Mac.
          http://www.alsoft.com/diskwarrior/
          http://www.uflysoft.com/
          http://mcaf.ee/x0pfi
Once it is in the external enclosure, if it won’t spin give it a gentle tap on a table and see if it will. I have revived several disk drives that way.

Can I retrieve Bookmarks from Mac Firefox once I upgrade from Mt Lion (10.8.5) to Mavericks (10.9.5) or are they lost forever?

Years of Bookmarks on Mac Firefox were lost when I recently upgraded from Mt Lion (10.8.5) To Mavericks. I refuse to believe there is no way to retrieve them. Suggestions? Thank you!

''FredMcD [[#answer-717164|said]]''
<blockquote>
When you did the upgrade, was the hard drive formatted? Is there a
folder that has the old files in it? Do you still have your old profiles?
</blockquote>
When you did the upgrade ... April 10 ... was the hard drive formatted? ... Yes! Is there a folder that has the old files in it? ... Don't know. Where would it be? ... Do you still have your old profiles? ... don't know. Where would it be? Thanks!

Ip address from mac address

Hi,
I need to retrieve the ip address of a network element knowing its mac/physical address. I didn't found any standard class in the sun packages that allows me to do that. Does anybody have an idea ? I'd rather not use any command line tricks.
Any idea is welcome, thanx

The MAC address belongs to a network layer that is not directly accessible to Java. Java builds on the higher level protocols as TCP and UDP, which are additionally not specific to the network implementation. Another alternative to command line tricks is to wrap native code through the JNI cleanly into Java classes. However, sacrificing platform independence.

Determining IP address from MAC

27
Fri Jun 29 10:30:40 2012
IDS Signature attack detected. Signature Type: Standard, Name: Auth flood, Description: Authentication Request flood, Track: per-Mac, Detecting AP Name: ACCESS-AP-KSHO-F3-WEST, Radio Type: 802.11b/g, Preced: 5, Hits: 300, Channel: 1, srcMac: 00:21:6A:AD:43:96
These messages just started popping up starting yesterday. Any ideas on how to track down an IP for this guy? From what I can see of the client logs it has never successfully connected, but at the same time this is what our syslog looks like
10:19:56
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:17:48
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:16:11
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:15:11
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:14:11
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:13:10
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:12:07
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:11:05
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:09:26
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:07:47
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:06:47
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:04:42
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:03:35
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:02:29
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
10:00:46
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
09:59:38
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
09:58:31
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
09:57:27
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
09:55:46
access-wlc-ksho-int-1
%DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client 00:21:6a:ad:43:96
And it keeps going non stop. It is the same MAC address so I am wondering if this is a misconfiguration of some sort, or truly an attack.

your device is doing too many authentication attempts.
it is clear that it is a device issue because the device does not respond to the wlc request in timely manner.
better to check device configuration and make sure it is correct. if all is fine try upgrading driver for the client.
HTH
Amjad
Sent from Cisco Technical Support iPad App

Retrieve files from MAC BOOK HD

Hello,
Could anyone refer me to some instructions for recovering some files from a MAC BOOK Hard Drive? The laptop will no longer start up after Installed some updates. When it boots up it reverts to a UNIX style command prompt. Before it gets to this point it gives notices of airport driver not found.
Is it possible to use my PC to get the files off the MAC hard drive?

as far as I know, pc's are unable to read HFS+ filesystems, just as OS X cannot write to NTFS without third party hacks. you can get an external enclosure and hook it up to another mac though.

Retrieving files from Mac on Ext HD (from Time Machine) on PC

I bought an external HD (Maxtor OneTouch4) and out of the box connected it to my MacBook and used Time Machine to backup my machine. I would like to access files from the hard drive on a PC machine (Windows XP) but Windows does not recognize the hard drive. Is this a formatting issue? Is there a setting that can be changed within Time Machine?

smokin_joe59 wrote:
I bought an external HD (Maxtor OneTouch4) and out of the box connected it to my MacBook and used Time Machine to backup my machine. I would like to access files from the hard drive on a PC machine (Windows XP) but Windows does not recognize the hard drive. Is this a formatting issue?
yes.
Is there a setting that can be changed within Time Machine?
no. TM drive as well as the system drive must be formatted mac os extended. windows can't read that format without extra software like MacDrive (not free). even with MacDrive i don't know how well it will be able to deal with TM drives because of the use of hard links and ACLs in TM backups. if you are going to try, DO NOT make ANY changes to the TM backups from windows. you'll likely ruin them.

Can anyone tell me how to move my email addresses from Mac Mail to Thunderbird

Hi all.
I've been having so many problems with Mac Mail that I decided to give Thunderbird v17 a go. It automatically imported my emails and account settings but hasn't imported my email addresses. I know they'll automatically be added as and when I reply to incoming emails but I assumed there would be some way of adding my existing contacts in one go. Searched the net for a solution but came up empty-handed. Any help you can give me will be much appreciated.
John

divermrg wrote:
Can anyone tell me how to move my email pics to my photos on a I-4? Operating system IOS 7.0.6
PRESS AND HOLD THE IMAGE IN THE EMAIL UNTIL THE OPTION TO 'SAVE IMAGE' APPEARS THEN TAP ON THAT.
See how annoying really large text is? Don't do that next time.

Isync will not login with new mobile me, need to change from .mac

I have been trying to sync but my old .mac user name and password are not working now with mobile me. Shows that login is valid but I get an error message - There was a problem with the sync operation. .Mac login failed. I assume that I need to change the login address from .mac to a mobile me address. Any ideas out there? Apple has nothing on this problem.

Patience. MobileMe is a mess.
When Apple substantially modified .Mac Sync to support extended attributes available with the introduction of Mac OS X 10.5, and simultaneously dropped support for for the most part for Mac OS X 10.3.9, it was three weeks until normal service was restored. And even then, most of the issues individual users had with .Mac sync prior to the transition were still present.
If you value your data, back it up and wait for an announcement from Apple that it works as expected.

Unable to get ip address from DHCP server for Aironet 1130AG Access Point

I have a network in which DHCP server is enabled. I have read the installation guide also there it is mentioned that 1130G Access point will not have any staic ip assigned to it.So it will automatically get the ip from the DHCP server from the network. I have connected that from the network but it is unable to get the ip address from the same. The same thing i have configured in the netgear it is coming fine. I have seen the sonic wall and used the IPSU tool also from checking the ip address from Mac Address but i am not able to get the same. Please provide me some tips to check where i am wrong in configuration because the first web page also not coming because of the ip address.

narendra,
I would suggest that the AP be connected to a laptop or desktop pc that would run a local dhcp server with a small scope setup...plenty of free ones on the web(this pc would obviously not be connected to your currnet network). This way you can watch the dhcp server hand the AP it's address (this can take a few minutes). Once you have the address use it to access the GUI and give the AP a static address (I find it good pratice to give all my autonomous AP's static addresses for ease of troubleshooting)...Hope that helps.

Can I retrieve messages from a blackberry email address in Mail for OS X?

I'm wondering if I can configure Mac OS X Mail to retrieve messages from a blackberry email address.
Thanks.

lte me know if my question doesn't make sense.

Retrieve email addresses from everyone who ever sent me an email?

Hello all,
Is there a way to retrieve every email address from everyone who has ever sent me an email? Is there a file somewhere? I don't mind if I have to cut and paste them into my address book. I have never used my address book, which was not too smart.
OS 10.5
Mail 3.6
Message was edited by: MilliMac

there is no file but you can do it using Mail Scripts. http://homepage.mac.com/aamann/Mail_Scripts.html
It has a script to import addresses from selected emails into Address Book. select all emails in your inbox and use it.

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Retrieve Addresses from .Mac

Similar Messages

Maybe you are looking for